--- zzzz-none-000/linux-3.10.107/drivers/char/hw_random/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/char/hw_random/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -2,7 +2,7 @@
 # Hardware Random Number Generator (RNG) configuration
 #
 
-config HW_RANDOM
+menuconfig HW_RANDOM
 	tristate "Hardware Random Number Generator Core support"
 	default m
 	---help---
@@ -10,7 +10,7 @@
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rng-core.  This provides a device
-	  that's usually called /dev/hw_random, and which exposes one
+	  that's usually called /dev/hwrng, and which exposes one
 	  of possibly several hardware random number generators.
 
 	  These hardware random number generators do not feed directly
@@ -20,9 +20,11 @@
 
 	  If unsure, say Y.
 
+if HW_RANDOM
+
 config HW_RANDOM_TIMERIOMEM
 	tristate "Timer IOMEM HW Random Number Generator support"
-	depends on HW_RANDOM && HAS_IOMEM
+	depends on HAS_IOMEM
 	---help---
 	  This driver provides kernel-side support for a generic Random
 	  Number Generator used by reading a 'dumb' iomem address that
@@ -36,7 +38,7 @@
 
 config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
-	depends on HW_RANDOM && (X86 || IA64) && PCI
+	depends on (X86 || IA64) && PCI
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -49,7 +51,7 @@
 
 config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
-	depends on HW_RANDOM && (X86 || PPC_MAPLE) && PCI
+	depends on (X86 || PPC_MAPLE) && PCI
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -62,8 +64,8 @@
 
 config HW_RANDOM_ATMEL
 	tristate "Atmel Random Number Generator support"
-	depends on HW_RANDOM && HAVE_CLK
-	default (HW_RANDOM && ARCH_AT91)
+	depends on ARCH_AT91 && HAVE_CLK && OF
+	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Atmel AT91 devices.
@@ -75,7 +77,7 @@
 
 config HW_RANDOM_BCM63XX
 	tristate "Broadcom BCM63xx Random Number Generator support"
-	depends on HW_RANDOM && BCM63XX
+	depends on BCM63XX
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -88,7 +90,7 @@
 
 config HW_RANDOM_BCM2835
 	tristate "Broadcom BCM2835 Random Number Generator support"
-	depends on HW_RANDOM && ARCH_BCM2835
+	depends on ARCH_BCM2835
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -99,9 +101,22 @@
 
 	  If unsure, say Y.
 
+config HW_RANDOM_IPROC_RNG200
+	tristate "Broadcom iProc RNG200 support"
+	depends on ARCH_BCM_IPROC
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the RNG200
+	  hardware found on the Broadcom iProc SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iproc-rng200
+
+	  If unsure, say Y.
+
 config HW_RANDOM_GEODE
 	tristate "AMD Geode HW Random Number Generator support"
-	depends on HW_RANDOM && X86_32 && PCI
+	depends on X86_32 && PCI
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -114,7 +129,7 @@
 
 config HW_RANDOM_N2RNG
 	tristate "Niagara2 Random Number Generator support"
-	depends on HW_RANDOM && SPARC64
+	depends on SPARC64
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -127,7 +142,7 @@
 
 config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
-	depends on HW_RANDOM && X86
+	depends on X86
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -140,7 +155,7 @@
 
 config HW_RANDOM_IXP4XX
 	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
-	depends on HW_RANDOM && ARCH_IXP4XX
+	depends on ARCH_IXP4XX
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Pseudo-Random
@@ -153,21 +168,34 @@
 
 config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
-	depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP2)
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 	default HW_RANDOM
  	---help---
  	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on OMAP16xx and OMAP24xx multimedia
-	  processors.
+	  Generator hardware found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx
+	  multimedia processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-rng.
 
  	  If unsure, say Y.
 
+config HW_RANDOM_OMAP3_ROM
+	tristate "OMAP3 ROM Random Number Generator support"
+	depends on ARCH_OMAP3
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on OMAP34xx processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap3-rom-rng.
+
+	  If unsure, say Y.
+
 config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
-	depends on HW_RANDOM && CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -180,7 +208,7 @@
 
 config HW_RANDOM_PASEMI
 	tristate "PA Semi HW Random Number Generator support"
-	depends on HW_RANDOM && PPC_PASEMI
+	depends on PPC_PASEMI
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -193,7 +221,7 @@
 
 config HW_RANDOM_VIRTIO
 	tristate "VirtIO Random Number Generator support"
-	depends on HW_RANDOM && VIRTIO
+	depends on VIRTIO
 	---help---
 	  This driver provides kernel-side support for the virtual Random Number
 	  Generator hardware.
@@ -203,7 +231,7 @@
 
 config HW_RANDOM_TX4939
 	tristate "TX4939 Random Number Generator support"
-	depends on HW_RANDOM && SOC_TX4939
+	depends on SOC_TX4939
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -216,7 +244,8 @@
 
 config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
-	depends on HW_RANDOM && ARCH_HAS_RNGA
+	depends on ARCH_HAS_RNGA
+	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Freescale i.MX processors.
@@ -228,7 +257,8 @@
 
 config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
-	depends on HW_RANDOM && ARCH_NOMADIK
+	depends on ARCH_NOMADIK
+	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
@@ -238,21 +268,10 @@
 
 	  If unsure, say Y.
 
-config HW_RANDOM_PICOXCELL
-	tristate "Picochip picoXcell true random number generator support"
-	depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
-	---help---
-	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on Picochip PC3x3 and later devices.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called picoxcell-rng.
-
-	  If unsure, say Y.
-
 config HW_RANDOM_PPC4XX
 	tristate "PowerPC 4xx generic true random number generator support"
-	depends on HW_RANDOM && PPC && 4xx
+	depends on PPC && 4xx
+	default HW_RANDOM
 	---help---
 	 This driver provides the kernel-side support for the TRNG hardware
 	 found in the security function of some PowerPC 4xx SoCs.
@@ -262,24 +281,9 @@
 
 	 If unsure, say N.
 
-config UML_RANDOM
-	depends on UML
-	tristate "Hardware random number generator"
-	help
-	  This option enables UML's "hardware" random number generator.  It
-	  attaches itself to the host's /dev/random, supplying as much entropy
-	  as the host has, rather than the small amount the UML gets from its
-	  own drivers.  It registers itself as a standard hardware random number
-	  generator, major 10, minor 183, and the canonical device name is
-	  /dev/hwrng.
-	  The way to make use of this is to install the rng-tools package
-	  (check your distro, or download from
-	  http://sourceforge.net/projects/gkernel/).  rngd periodically reads
-	  /dev/hwrng and injects the entropy into /dev/random.
-
 config HW_RANDOM_PSERIES
 	tristate "pSeries HW Random Number Generator support"
-	depends on HW_RANDOM && PPC64 && IBMVIO
+	depends on PPC64 && IBMVIO
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -290,9 +294,23 @@
 
 	  If unsure, say Y.
 
+config HW_RANDOM_POWERNV
+	tristate "PowerNV Random Number Generator support"
+	depends on PPC_POWERNV
+	default HW_RANDOM
+	---help---
+	  This is the driver for Random Number Generator hardware found
+	  in POWER7+ and above machines for PowerNV platform.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernv-rng.
+
+	  If unsure, say Y.
+
 config HW_RANDOM_EXYNOS
 	tristate "EXYNOS HW random number generator support"
-	depends on HW_RANDOM && HAS_IOMEM && HAVE_CLK
+	depends on ARCH_EXYNOS
+	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on EXYNOS SOCs.
@@ -304,7 +322,7 @@
 
 config HW_RANDOM_TPM
 	tristate "TPM HW Random Number Generator support"
-	depends on HW_RANDOM && TCG_TPM
+	depends on TCG_TPM
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -314,3 +332,68 @@
 	  module will be called tpm-rng.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_MSM
+	tristate "Qualcomm SoCs Random Number Generator support"
+	depends on HW_RANDOM && ARCH_QCOM
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Qualcomm SoCs.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called msm-rng.
+
+	  If unsure, say Y.
+
+config HW_RANDOM_ST
+	tristate "ST Microelectronics HW Random Number Generator support"
+	depends on HW_RANDOM && ARCH_STI
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on STi series of SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-rng.
+
+config HW_RANDOM_XGENE
+	tristate "APM X-Gene True Random Number Generator (TRNG) support"
+	depends on HW_RANDOM && ARCH_XGENE
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on APM X-Gene SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xgene_rng.
+
+	  If unsure, say Y.
+
+config HW_RANDOM_STM32
+	tristate "STMicroelectronics STM32 random number generator"
+	depends on HW_RANDOM && (ARCH_STM32 || COMPILE_TEST)
+	help
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on STM32 microcontrollers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32-rng.
+
+	  If unsure, say N.
+
+endif # HW_RANDOM
+
+config UML_RANDOM
+	depends on UML
+	tristate "Hardware random number generator"
+	help
+	  This option enables UML's "hardware" random number generator.  It
+	  attaches itself to the host's /dev/random, supplying as much entropy
+	  as the host has, rather than the small amount the UML gets from its
+	  own drivers.  It registers itself as a standard hardware random number
+	  generator, major 10, minor 183, and the canonical device name is
+	  /dev/hwrng.
+	  The way to make use of this is to install the rng-tools package
+	  (check your distro, or download from
+	  http://sourceforge.net/projects/gkernel/).  rngd periodically reads
+	  /dev/hwrng and injects the entropy into /dev/random.