--- zzzz-none-000/linux-3.10.107/drivers/clocksource/bcm_kona_timer.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/clocksource/bcm_kona_timer.c	2021-02-04 17:41:59.000000000 +0000
@@ -17,6 +17,7 @@
 #include <linux/jiffies.h>
 #include <linux/clockchips.h>
 #include <linux/types.h>
+#include <linux/clk.h>
 
 #include <linux/io.h>
 #include <asm/mach/time.h>
@@ -67,9 +68,8 @@
 }
 
 static void
-kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
+kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
 {
-	void __iomem *base = IOMEM(timer_base);
 	int loop_limit = 4;
 
 	/*
@@ -85,9 +85,9 @@
 	 */
 
 	while (--loop_limit) {
-		*msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
-		*lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
-		if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
+		*msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
+		*lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
+		if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
 			break;
 	}
 	if (!loop_limit) {
@@ -98,35 +98,6 @@
 	return;
 }
 
-static const struct of_device_id bcm_timer_ids[] __initconst = {
-	{.compatible = "bcm,kona-timer"},
-	{},
-};
-
-static void __init kona_timers_init(void)
-{
-	struct device_node *node;
-	u32 freq;
-
-	node = of_find_matching_node(NULL, bcm_timer_ids);
-
-	if (!node)
-		panic("No timer");
-
-	if (!of_property_read_u32(node, "clock-frequency", &freq))
-		arch_timer_rate = freq;
-	else
-		panic("clock-frequency not set in the .dts file");
-
-	/* Setup IRQ numbers */
-	timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
-	/* Setup IO addresses */
-	timers.tmr_regs = of_iomap(node, 0);
-
-	kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
 static int kona_timer_set_next_event(unsigned long clc,
 				  struct clock_event_device *unused)
 {
@@ -156,25 +127,18 @@
 	return 0;
 }
 
-static void kona_timer_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *unused)
+static int kona_timer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* by default mode is one shot don't do any thing */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		kona_timer_disable_and_clear(timers.tmr_regs);
-	}
+	kona_timer_disable_and_clear(timers.tmr_regs);
+	return 0;
 }
 
 static struct clock_event_device kona_clockevent_timer = {
 	.name = "timer 1",
 	.features = CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = kona_timer_set_next_event,
-	.set_mode = kona_timer_set_mode
+	.set_state_shutdown = kona_timer_shutdown,
+	.tick_resume = kona_timer_shutdown,
 };
 
 static void __init kona_timer_clockevents_init(void)
@@ -199,13 +163,44 @@
 	.handler = kona_timer_interrupt,
 };
 
-static void __init kona_timer_init(void)
+static void __init kona_timer_init(struct device_node *node)
 {
-	kona_timers_init();
+	u32 freq;
+	struct clk *external_clk;
+
+	if (!of_device_is_available(node)) {
+		pr_info("Kona Timer v1 marked as disabled in device tree\n");
+		return;
+	}
+
+	external_clk = of_clk_get_by_name(node, NULL);
+
+	if (!IS_ERR(external_clk)) {
+		arch_timer_rate = clk_get_rate(external_clk);
+		clk_prepare_enable(external_clk);
+	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+		arch_timer_rate = freq;
+	} else {
+		pr_err("Kona Timer v1 unable to determine clock-frequency");
+		return;
+	}
+
+	/* Setup IRQ numbers */
+	timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+	/* Setup IO addresses */
+	timers.tmr_regs = of_iomap(node, 0);
+
+	kona_timer_disable_and_clear(timers.tmr_regs);
+
 	kona_timer_clockevents_init();
 	setup_irq(timers.tmr_irq, &kona_timer_irq);
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
 }
 
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
-	kona_timer_init);
+CLOCKSOURCE_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
+/*
+ * bcm,kona-timer is deprecated by brcm,kona-timer
+ * being kept here for driver compatibility
+ */
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);