--- zzzz-none-000/linux-3.10.107/drivers/clocksource/dw_apb_timer.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/clocksource/dw_apb_timer.c 2021-02-04 17:41:59.000000000 +0000 @@ -110,70 +110,87 @@ apbt_writel(timer, ctrl, APBTMR_N_CONTROL); } -static void apbt_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int apbt_shutdown(struct clock_event_device *evt) { + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); unsigned long ctrl; - unsigned long period; + + pr_debug("%s CPU %d state=shutdown\n", __func__, + cpumask_first(evt->cpumask)); + + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_set_oneshot(struct clock_event_device *evt) +{ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + unsigned long ctrl; - pr_debug("%s CPU %d mode=%d\n", __func__, first_cpu(*evt->cpumask), - mode); + pr_debug("%s CPU %d state=oneshot\n", __func__, + cpumask_first(evt->cpumask)); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - period = DIV_ROUND_UP(dw_ced->timer.freq, HZ); - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - ctrl |= APBTMR_CONTROL_MODE_PERIODIC; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - /* - * DW APB p. 46, have to disable timer before load counter, - * may cause sync problem. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - udelay(1); - pr_debug("Setting clock period %lu for HZ %d\n", period, HZ); - apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT); - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_ONESHOT: - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - /* - * set free running mode, this mode will let timer reload max - * timeout which will give time (3min on 25MHz clock) to rearm - * the next event, therefore emulate the one-shot mode. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; - - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - /* write again to set free running mode */ - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - - /* - * DW APB p. 46, load counter with all 1s before starting free - * running mode. - */ - apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT); - ctrl &= ~APBTMR_CONTROL_INT; - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_RESUME: - apbt_enable_int(&dw_ced->timer); - break; - } + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + /* + * set free running mode, this mode will let timer reload max + * timeout which will give time (3min on 25MHz clock) to rearm + * the next event, therefore emulate the one-shot mode. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + /* write again to set free running mode */ + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + + /* + * DW APB p. 46, load counter with all 1s before starting free + * running mode. + */ + apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT); + ctrl &= ~APBTMR_CONTROL_INT; + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_set_periodic(struct clock_event_device *evt) +{ + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ); + unsigned long ctrl; + + pr_debug("%s CPU %d state=periodic\n", __func__, + cpumask_first(evt->cpumask)); + + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + ctrl |= APBTMR_CONTROL_MODE_PERIODIC; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + /* + * DW APB p. 46, have to disable timer before load counter, + * may cause sync problem. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + udelay(1); + pr_debug("Setting clock period %lu for HZ %d\n", period, HZ); + apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_resume(struct clock_event_device *evt) +{ + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + + pr_debug("%s CPU %d state=resume\n", __func__, + cpumask_first(evt->cpumask)); + + apbt_enable_int(&dw_ced->timer); + return 0; } static int apbt_next_event(unsigned long delta, @@ -231,8 +248,12 @@ &dw_ced->ced); dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced); dw_ced->ced.cpumask = cpumask_of(cpu); - dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - dw_ced->ced.set_mode = apbt_set_mode; + dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ; + dw_ced->ced.set_state_shutdown = apbt_shutdown; + dw_ced->ced.set_state_periodic = apbt_set_periodic; + dw_ced->ced.set_state_oneshot = apbt_set_oneshot; + dw_ced->ced.tick_resume = apbt_resume; dw_ced->ced.set_next_event = apbt_next_event; dw_ced->ced.irq = dw_ced->timer.irq; dw_ced->ced.rating = rating; @@ -243,8 +264,7 @@ dw_ced->irqaction.dev_id = &dw_ced->ced; dw_ced->irqaction.irq = irq; dw_ced->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL | - IRQF_NOBALANCING | - IRQF_DISABLED; + IRQF_NOBALANCING; dw_ced->eoi = apbt_eoi; err = setup_irq(irq, &dw_ced->irqaction); @@ -387,15 +407,3 @@ { return (cycle_t)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE); } - -/** - * dw_apb_clocksource_unregister() - unregister and free a clocksource. - * - * @dw_cs: The clocksource to unregister/free. - */ -void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs) -{ - clocksource_unregister(&dw_cs->cs); - - kfree(dw_cs); -}