--- zzzz-none-000/linux-3.10.107/drivers/gpu/drm/i915/intel_hdmi.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/gpu/drm/i915/intel_hdmi.c 2021-02-04 17:41:59.000000000 +0000 @@ -29,7 +29,9 @@ #include #include #include +#include #include +#include #include #include #include "intel_drv.h" @@ -66,89 +68,85 @@ return enc_to_intel_hdmi(&intel_attached_encoder(connector)->base); } -void intel_dip_infoframe_csum(struct dip_infoframe *frame) +static u32 g4x_infoframe_index(enum hdmi_infoframe_type type) { - uint8_t *data = (uint8_t *)frame; - uint8_t sum = 0; - unsigned i; - - frame->checksum = 0; - frame->ecc = 0; - - for (i = 0; i < frame->len + DIP_HEADER_SIZE; i++) - sum += data[i]; - - frame->checksum = 0x100 - sum; -} - -static u32 g4x_infoframe_index(struct dip_infoframe *frame) -{ - switch (frame->type) { - case DIP_TYPE_AVI: + switch (type) { + case HDMI_INFOFRAME_TYPE_AVI: return VIDEO_DIP_SELECT_AVI; - case DIP_TYPE_SPD: + case HDMI_INFOFRAME_TYPE_SPD: return VIDEO_DIP_SELECT_SPD; + case HDMI_INFOFRAME_TYPE_VENDOR: + return VIDEO_DIP_SELECT_VENDOR; default: - DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type); + DRM_DEBUG_DRIVER("unknown info frame type %d\n", type); return 0; } } -static u32 g4x_infoframe_enable(struct dip_infoframe *frame) +static u32 g4x_infoframe_enable(enum hdmi_infoframe_type type) { - switch (frame->type) { - case DIP_TYPE_AVI: + switch (type) { + case HDMI_INFOFRAME_TYPE_AVI: return VIDEO_DIP_ENABLE_AVI; - case DIP_TYPE_SPD: + case HDMI_INFOFRAME_TYPE_SPD: return VIDEO_DIP_ENABLE_SPD; + case HDMI_INFOFRAME_TYPE_VENDOR: + return VIDEO_DIP_ENABLE_VENDOR; default: - DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type); + DRM_DEBUG_DRIVER("unknown info frame type %d\n", type); return 0; } } -static u32 hsw_infoframe_enable(struct dip_infoframe *frame) +static u32 hsw_infoframe_enable(enum hdmi_infoframe_type type) { - switch (frame->type) { - case DIP_TYPE_AVI: + switch (type) { + case HDMI_INFOFRAME_TYPE_AVI: return VIDEO_DIP_ENABLE_AVI_HSW; - case DIP_TYPE_SPD: + case HDMI_INFOFRAME_TYPE_SPD: return VIDEO_DIP_ENABLE_SPD_HSW; + case HDMI_INFOFRAME_TYPE_VENDOR: + return VIDEO_DIP_ENABLE_VS_HSW; default: - DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type); + DRM_DEBUG_DRIVER("unknown info frame type %d\n", type); return 0; } } -static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, - enum transcoder cpu_transcoder) -{ - switch (frame->type) { - case DIP_TYPE_AVI: - return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder); - case DIP_TYPE_SPD: - return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder); +static u32 hsw_dip_data_reg(struct drm_i915_private *dev_priv, + enum transcoder cpu_transcoder, + enum hdmi_infoframe_type type, + int i) +{ + switch (type) { + case HDMI_INFOFRAME_TYPE_AVI: + return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i); + case HDMI_INFOFRAME_TYPE_SPD: + return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder, i); + case HDMI_INFOFRAME_TYPE_VENDOR: + return HSW_TVIDEO_DIP_VS_DATA(cpu_transcoder, i); default: - DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type); + DRM_DEBUG_DRIVER("unknown info frame type %d\n", type); return 0; } } static void g4x_write_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) + enum hdmi_infoframe_type type, + const void *frame, ssize_t len) { - uint32_t *data = (uint32_t *)frame; + const uint32_t *data = frame; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 val = I915_READ(VIDEO_DIP_CTL); - unsigned i, len = DIP_HEADER_SIZE + frame->len; + int i; WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n"); val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */ - val |= g4x_infoframe_index(frame); + val |= g4x_infoframe_index(type); - val &= ~g4x_infoframe_enable(frame); + val &= ~g4x_infoframe_enable(type); I915_WRITE(VIDEO_DIP_CTL, val); @@ -162,7 +160,7 @@ I915_WRITE(VIDEO_DIP_DATA, 0); mmiowb(); - val |= g4x_infoframe_enable(frame); + val |= g4x_infoframe_enable(type); val &= ~VIDEO_DIP_FREQ_MASK; val |= VIDEO_DIP_FREQ_VSYNC; @@ -170,23 +168,40 @@ POSTING_READ(VIDEO_DIP_CTL); } +static bool g4x_infoframe_enabled(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); + u32 val = I915_READ(VIDEO_DIP_CTL); + + if ((val & VIDEO_DIP_ENABLE) == 0) + return false; + + if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->port)) + return false; + + return val & (VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD); +} + static void ibx_write_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) + enum hdmi_infoframe_type type, + const void *frame, ssize_t len) { - uint32_t *data = (uint32_t *)frame; + const uint32_t *data = frame; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - int reg = TVIDEO_DIP_CTL(intel_crtc->pipe); - unsigned i, len = DIP_HEADER_SIZE + frame->len; + int i, reg = TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n"); val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */ - val |= g4x_infoframe_index(frame); + val |= g4x_infoframe_index(type); - val &= ~g4x_infoframe_enable(frame); + val &= ~g4x_infoframe_enable(type); I915_WRITE(reg, val); @@ -200,7 +215,7 @@ I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0); mmiowb(); - val |= g4x_infoframe_enable(frame); + val |= g4x_infoframe_enable(type); val &= ~VIDEO_DIP_FREQ_MASK; val |= VIDEO_DIP_FREQ_VSYNC; @@ -208,26 +223,46 @@ POSTING_READ(reg); } -static void cpt_write_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) +static bool ibx_infoframe_enabled(struct drm_encoder *encoder) { - uint32_t *data = (uint32_t *)frame; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); int reg = TVIDEO_DIP_CTL(intel_crtc->pipe); - unsigned i, len = DIP_HEADER_SIZE + frame->len; + u32 val = I915_READ(reg); + + if ((val & VIDEO_DIP_ENABLE) == 0) + return false; + + if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->port)) + return false; + + return val & (VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); +} + +static void cpt_write_infoframe(struct drm_encoder *encoder, + enum hdmi_infoframe_type type, + const void *frame, ssize_t len) +{ + const uint32_t *data = frame; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + int i, reg = TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n"); val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */ - val |= g4x_infoframe_index(frame); + val |= g4x_infoframe_index(type); /* The DIP control register spec says that we need to update the AVI * infoframe without clearing its enable bit */ - if (frame->type != DIP_TYPE_AVI) - val &= ~g4x_infoframe_enable(frame); + if (type != HDMI_INFOFRAME_TYPE_AVI) + val &= ~g4x_infoframe_enable(type); I915_WRITE(reg, val); @@ -241,7 +276,7 @@ I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0); mmiowb(); - val |= g4x_infoframe_enable(frame); + val |= g4x_infoframe_enable(type); val &= ~VIDEO_DIP_FREQ_MASK; val |= VIDEO_DIP_FREQ_VSYNC; @@ -249,23 +284,39 @@ POSTING_READ(reg); } +static bool cpt_infoframe_enabled(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + int reg = TVIDEO_DIP_CTL(intel_crtc->pipe); + u32 val = I915_READ(reg); + + if ((val & VIDEO_DIP_ENABLE) == 0) + return false; + + return val & (VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); +} + static void vlv_write_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) + enum hdmi_infoframe_type type, + const void *frame, ssize_t len) { - uint32_t *data = (uint32_t *)frame; + const uint32_t *data = frame; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); - unsigned i, len = DIP_HEADER_SIZE + frame->len; + int i, reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n"); val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */ - val |= g4x_infoframe_index(frame); + val |= g4x_infoframe_index(type); - val &= ~g4x_infoframe_enable(frame); + val &= ~g4x_infoframe_enable(type); I915_WRITE(reg, val); @@ -279,7 +330,7 @@ I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), 0); mmiowb(); - val |= g4x_infoframe_enable(frame); + val |= g4x_infoframe_enable(type); val &= ~VIDEO_DIP_FREQ_MASK; val |= VIDEO_DIP_FREQ_VSYNC; @@ -287,98 +338,184 @@ POSTING_READ(reg); } +static bool vlv_infoframe_enabled(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); + int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); + u32 val = I915_READ(reg); + + if ((val & VIDEO_DIP_ENABLE) == 0) + return false; + + if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->port)) + return false; + + return val & (VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); +} + static void hsw_write_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) + enum hdmi_infoframe_type type, + const void *frame, ssize_t len) { - uint32_t *data = (uint32_t *)frame; + const uint32_t *data = frame; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config.cpu_transcoder); - u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->config.cpu_transcoder); - unsigned int i, len = DIP_HEADER_SIZE + frame->len; + enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder); + u32 data_reg; + int i; u32 val = I915_READ(ctl_reg); + data_reg = hsw_dip_data_reg(dev_priv, cpu_transcoder, type, 0); if (data_reg == 0) return; - val &= ~hsw_infoframe_enable(frame); + val &= ~hsw_infoframe_enable(type); I915_WRITE(ctl_reg, val); mmiowb(); for (i = 0; i < len; i += 4) { - I915_WRITE(data_reg + i, *data); + I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder, + type, i >> 2), *data); data++; } /* Write every possible data byte to force correct ECC calculation. */ for (; i < VIDEO_DIP_DATA_SIZE; i += 4) - I915_WRITE(data_reg + i, 0); + I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder, + type, i >> 2), 0); mmiowb(); - val |= hsw_infoframe_enable(frame); + val |= hsw_infoframe_enable(type); I915_WRITE(ctl_reg, val); POSTING_READ(ctl_reg); } -static void intel_set_infoframe(struct drm_encoder *encoder, - struct dip_infoframe *frame) +static bool hsw_infoframe_enabled(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config->cpu_transcoder); + u32 val = I915_READ(ctl_reg); + + return val & (VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW | + VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW | + VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW); +} + +/* + * The data we write to the DIP data buffer registers is 1 byte bigger than the + * HDMI infoframe size because of an ECC/reserved byte at position 3 (starting + * at 0). It's also a byte used by DisplayPort so the same DIP registers can be + * used for both technologies. + * + * DW0: Reserved/ECC/DP | HB2 | HB1 | HB0 + * DW1: DB3 | DB2 | DB1 | DB0 + * DW2: DB7 | DB6 | DB5 | DB4 + * DW3: ... + * + * (HB is Header Byte, DB is Data Byte) + * + * The hdmi pack() functions don't know about that hardware specific hole so we + * trick them by giving an offset into the buffer and moving back the header + * bytes by one. + */ +static void intel_write_infoframe(struct drm_encoder *encoder, + union hdmi_infoframe *frame) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + uint8_t buffer[VIDEO_DIP_DATA_SIZE]; + ssize_t len; + + /* see comment above for the reason for this offset */ + len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1); + if (len < 0) + return; + + /* Insert the 'hole' (see big comment above) at position 3 */ + buffer[0] = buffer[1]; + buffer[1] = buffer[2]; + buffer[2] = buffer[3]; + buffer[3] = 0; + len++; - intel_dip_infoframe_csum(frame); - intel_hdmi->write_infoframe(encoder, frame); + intel_hdmi->write_infoframe(encoder, frame->any.type, buffer, len); } static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + const struct drm_display_mode *adjusted_mode) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - struct dip_infoframe avi_if = { - .type = DIP_TYPE_AVI, - .ver = DIP_VERSION_AVI, - .len = DIP_LEN_AVI, - }; + union hdmi_infoframe frame; + int ret; - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) - avi_if.body.avi.YQ_CN_PR |= DIP_AVI_PR_2; + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, + adjusted_mode); + if (ret < 0) { + DRM_ERROR("couldn't fill AVI infoframe\n"); + return; + } if (intel_hdmi->rgb_quant_range_selectable) { - if (intel_crtc->config.limited_color_range) - avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_LIMITED; + if (intel_crtc->config->limited_color_range) + frame.avi.quantization_range = + HDMI_QUANTIZATION_RANGE_LIMITED; else - avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_FULL; + frame.avi.quantization_range = + HDMI_QUANTIZATION_RANGE_FULL; } - avi_if.body.avi.VIC = drm_match_cea_mode(adjusted_mode); - - intel_set_infoframe(encoder, &avi_if); + intel_write_infoframe(encoder, &frame); } static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder) { - struct dip_infoframe spd_if; + union hdmi_infoframe frame; + int ret; + + ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx"); + if (ret < 0) { + DRM_ERROR("couldn't fill SPD infoframe\n"); + return; + } + + frame.spd.sdi = HDMI_SPD_SDI_PC; + + intel_write_infoframe(encoder, &frame); +} + +static void +intel_hdmi_set_hdmi_infoframe(struct drm_encoder *encoder, + const struct drm_display_mode *adjusted_mode) +{ + union hdmi_infoframe frame; + int ret; - memset(&spd_if, 0, sizeof(spd_if)); - spd_if.type = DIP_TYPE_SPD; - spd_if.ver = DIP_VERSION_SPD; - spd_if.len = DIP_LEN_SPD; - strcpy(spd_if.body.spd.vn, "Intel"); - strcpy(spd_if.body.spd.pd, "Integrated gfx"); - spd_if.body.spd.sdi = DIP_SPD_PC; + ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi, + adjusted_mode); + if (ret < 0) + return; - intel_set_infoframe(encoder, &spd_if); + intel_write_infoframe(encoder, &frame); } static void g4x_set_infoframes(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + bool enable, + const struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi; u32 reg = VIDEO_DIP_CTL; u32 val = I915_READ(reg); - u32 port; + u32 port = VIDEO_DIP_PORT(intel_dig_port->port); assert_hdmi_port_disabled(intel_hdmi); @@ -393,49 +530,137 @@ * either. */ val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; - if (!intel_hdmi->has_hdmi_sink) { + if (!enable) { if (!(val & VIDEO_DIP_ENABLE)) return; - val &= ~VIDEO_DIP_ENABLE; + if (port != (val & VIDEO_DIP_PORT_MASK)) { + DRM_DEBUG_KMS("video DIP still enabled on port %c\n", + (val & VIDEO_DIP_PORT_MASK) >> 29); + return; + } + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD); I915_WRITE(reg, val); POSTING_READ(reg); return; } - switch (intel_dig_port->port) { - case PORT_B: - port = VIDEO_DIP_PORT_B; - break; - case PORT_C: - port = VIDEO_DIP_PORT_C; - break; - default: - BUG(); - return; - } - if (port != (val & VIDEO_DIP_PORT_MASK)) { if (val & VIDEO_DIP_ENABLE) { - val &= ~VIDEO_DIP_ENABLE; - I915_WRITE(reg, val); - POSTING_READ(reg); + DRM_DEBUG_KMS("video DIP already enabled on port %c\n", + (val & VIDEO_DIP_PORT_MASK) >> 29); + return; } val &= ~VIDEO_DIP_PORT_MASK; val |= port; } val |= VIDEO_DIP_ENABLE; - val &= ~VIDEO_DIP_ENABLE_VENDOR; + val &= ~(VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD); I915_WRITE(reg, val); POSTING_READ(reg); intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); + intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); +} + +static bool hdmi_sink_is_deep_color(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_connector *connector; + + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); + + /* + * HDMI cloning is only supported on g4x which doesn't + * support deep color or GCP infoframes anyway so no + * need to worry about multiple HDMI sinks here. + */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + return connector->display_info.bpc > 8; + + return false; +} + +/* + * Determine if default_phase=1 can be indicated in the GCP infoframe. + * + * From HDMI specification 1.4a: + * - The first pixel of each Video Data Period shall always have a pixel packing phase of 0 + * - The first pixel following each Video Data Period shall have a pixel packing phase of 0 + * - The PP bits shall be constant for all GCPs and will be equal to the last packing phase + * - The first pixel following every transition of HSYNC or VSYNC shall have a pixel packing + * phase of 0 + */ +static bool gcp_default_phase_possible(int pipe_bpp, + const struct drm_display_mode *mode) +{ + unsigned int pixels_per_group; + + switch (pipe_bpp) { + case 30: + /* 4 pixels in 5 clocks */ + pixels_per_group = 4; + break; + case 36: + /* 2 pixels in 3 clocks */ + pixels_per_group = 2; + break; + case 48: + /* 1 pixel in 2 clocks */ + pixels_per_group = 1; + break; + default: + /* phase information not relevant for 8bpc */ + return false; + } + + return mode->crtc_hdisplay % pixels_per_group == 0 && + mode->crtc_htotal % pixels_per_group == 0 && + mode->crtc_hblank_start % pixels_per_group == 0 && + mode->crtc_hblank_end % pixels_per_group == 0 && + mode->crtc_hsync_start % pixels_per_group == 0 && + mode->crtc_hsync_end % pixels_per_group == 0 && + ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0 || + mode->crtc_htotal/2 % pixels_per_group == 0); +} + +static bool intel_hdmi_set_gcp_infoframe(struct drm_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); + u32 reg, val = 0; + + if (HAS_DDI(dev_priv)) + reg = HSW_TVIDEO_DIP_GCP(crtc->config->cpu_transcoder); + else if (IS_VALLEYVIEW(dev_priv)) + reg = VLV_TVIDEO_DIP_GCP(crtc->pipe); + else if (HAS_PCH_SPLIT(dev_priv->dev)) + reg = TVIDEO_DIP_GCP(crtc->pipe); + else + return false; + + /* Indicate color depth whenever the sink supports deep color */ + if (hdmi_sink_is_deep_color(encoder)) + val |= GCP_COLOR_INDICATION; + + /* Enable default_phase whenever the display mode is suitably aligned */ + if (gcp_default_phase_possible(crtc->config->pipe_bpp, + &crtc->config->base.adjusted_mode)) + val |= GCP_DEFAULT_PHASE_ENABLE; + + I915_WRITE(reg, val); + + return val != 0; } static void ibx_set_infoframes(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + bool enable, + const struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); @@ -443,60 +668,51 @@ struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi; u32 reg = TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); - u32 port; + u32 port = VIDEO_DIP_PORT(intel_dig_port->port); assert_hdmi_port_disabled(intel_hdmi); /* See the big comment in g4x_set_infoframes() */ val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; - if (!intel_hdmi->has_hdmi_sink) { + if (!enable) { if (!(val & VIDEO_DIP_ENABLE)) return; - val &= ~VIDEO_DIP_ENABLE; + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); I915_WRITE(reg, val); POSTING_READ(reg); return; } - switch (intel_dig_port->port) { - case PORT_B: - port = VIDEO_DIP_PORT_B; - break; - case PORT_C: - port = VIDEO_DIP_PORT_C; - break; - case PORT_D: - port = VIDEO_DIP_PORT_D; - break; - default: - BUG(); - return; - } - if (port != (val & VIDEO_DIP_PORT_MASK)) { - if (val & VIDEO_DIP_ENABLE) { - val &= ~VIDEO_DIP_ENABLE; - I915_WRITE(reg, val); - POSTING_READ(reg); - } + WARN(val & VIDEO_DIP_ENABLE, + "DIP already enabled on port %c\n", + (val & VIDEO_DIP_PORT_MASK) >> 29); val &= ~VIDEO_DIP_PORT_MASK; val |= port; } val |= VIDEO_DIP_ENABLE; - val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | - VIDEO_DIP_ENABLE_GCP); + val &= ~(VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); + + if (intel_hdmi_set_gcp_infoframe(encoder)) + val |= VIDEO_DIP_ENABLE_GCP; I915_WRITE(reg, val); POSTING_READ(reg); intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); + intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); } static void cpt_set_infoframes(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + bool enable, + const struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); @@ -509,10 +725,12 @@ /* See the big comment in g4x_set_infoframes() */ val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; - if (!intel_hdmi->has_hdmi_sink) { + if (!enable) { if (!(val & VIDEO_DIP_ENABLE)) return; - val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI); + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); I915_WRITE(reg, val); POSTING_READ(reg); return; @@ -521,120 +739,138 @@ /* Set both together, unset both together: see the spec. */ val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI; val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | - VIDEO_DIP_ENABLE_GCP); + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); + + if (intel_hdmi_set_gcp_infoframe(encoder)) + val |= VIDEO_DIP_ENABLE_GCP; I915_WRITE(reg, val); POSTING_READ(reg); intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); + intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); } static void vlv_set_infoframes(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + bool enable, + const struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); u32 reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); + u32 port = VIDEO_DIP_PORT(intel_dig_port->port); assert_hdmi_port_disabled(intel_hdmi); /* See the big comment in g4x_set_infoframes() */ val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; - if (!intel_hdmi->has_hdmi_sink) { + if (!enable) { if (!(val & VIDEO_DIP_ENABLE)) return; - val &= ~VIDEO_DIP_ENABLE; + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); I915_WRITE(reg, val); POSTING_READ(reg); return; } + if (port != (val & VIDEO_DIP_PORT_MASK)) { + WARN(val & VIDEO_DIP_ENABLE, + "DIP already enabled on port %c\n", + (val & VIDEO_DIP_PORT_MASK) >> 29); + val &= ~VIDEO_DIP_PORT_MASK; + val |= port; + } + val |= VIDEO_DIP_ENABLE; - val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | - VIDEO_DIP_ENABLE_GCP); + val &= ~(VIDEO_DIP_ENABLE_AVI | + VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | + VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP); + + if (intel_hdmi_set_gcp_infoframe(encoder)) + val |= VIDEO_DIP_ENABLE_GCP; I915_WRITE(reg, val); POSTING_READ(reg); intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); + intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); } static void hsw_set_infoframes(struct drm_encoder *encoder, - struct drm_display_mode *adjusted_mode) + bool enable, + const struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); - u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config.cpu_transcoder); + u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config->cpu_transcoder); u32 val = I915_READ(reg); assert_hdmi_port_disabled(intel_hdmi); - if (!intel_hdmi->has_hdmi_sink) { - I915_WRITE(reg, 0); + val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW | + VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW | + VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW); + + if (!enable) { + I915_WRITE(reg, val); POSTING_READ(reg); return; } - val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW | - VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW); + if (intel_hdmi_set_gcp_infoframe(encoder)) + val |= VIDEO_DIP_ENABLE_GCP_HSW; I915_WRITE(reg, val); POSTING_READ(reg); intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); + intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); } -static void intel_hdmi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +static void intel_hdmi_prepare(struct intel_encoder *encoder) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; u32 hdmi_val; hdmi_val = SDVO_ENCODING_HDMI; - if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev)) - hdmi_val |= intel_hdmi->color_range; + if (!HAS_PCH_SPLIT(dev) && crtc->config->limited_color_range) + hdmi_val |= HDMI_COLOR_RANGE_16_235; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH; - if (intel_crtc->config.pipe_bpp > 24) + if (crtc->config->pipe_bpp > 24) hdmi_val |= HDMI_COLOR_FORMAT_12bpc; else hdmi_val |= SDVO_COLOR_FORMAT_8bpc; - /* Required on CPT */ - if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev)) - hdmi_val |= HDMI_MODE_SELECT_HDMI; - - if (intel_hdmi->has_audio) { - DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n", - pipe_name(intel_crtc->pipe)); - hdmi_val |= SDVO_AUDIO_ENABLE; + if (crtc->config->has_hdmi_sink) hdmi_val |= HDMI_MODE_SELECT_HDMI; - intel_write_eld(encoder, adjusted_mode); - } if (HAS_PCH_CPT(dev)) - hdmi_val |= SDVO_PIPE_SEL_CPT(intel_crtc->pipe); + hdmi_val |= SDVO_PIPE_SEL_CPT(crtc->pipe); + else if (IS_CHERRYVIEW(dev)) + hdmi_val |= SDVO_PIPE_SEL_CHV(crtc->pipe); else - hdmi_val |= SDVO_PIPE_SEL(intel_crtc->pipe); + hdmi_val |= SDVO_PIPE_SEL(crtc->pipe); I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val); POSTING_READ(intel_hdmi->hdmi_reg); - - intel_hdmi->set_infoframes(encoder, adjusted_mode); } static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder, @@ -643,8 +879,13 @@ struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + enum intel_display_power_domain power_domain; u32 tmp; + power_domain = intel_display_port_power_domain(encoder); + if (!intel_display_power_is_enabled(dev_priv, power_domain)) + return false; + tmp = I915_READ(intel_hdmi->hdmi_reg); if (!(tmp & SDVO_ENABLE)) @@ -652,233 +893,542 @@ if (HAS_PCH_CPT(dev)) *pipe = PORT_TO_PIPE_CPT(tmp); + else if (IS_CHERRYVIEW(dev)) + *pipe = SDVO_PORT_TO_PIPE_CHV(tmp); else *pipe = PORT_TO_PIPE(tmp); return true; } -static void intel_enable_hdmi(struct intel_encoder *encoder) +static void intel_hdmi_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 tmp, flags = 0; + int dotclock; + + tmp = I915_READ(intel_hdmi->hdmi_reg); + + if (tmp & SDVO_HSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & SDVO_VSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + + if (tmp & HDMI_MODE_SELECT_HDMI) + pipe_config->has_hdmi_sink = true; + + if (intel_hdmi->infoframe_enabled(&encoder->base)) + pipe_config->has_infoframe = true; + + if (tmp & SDVO_AUDIO_ENABLE) + pipe_config->has_audio = true; + + if (!HAS_PCH_SPLIT(dev) && + tmp & HDMI_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + + pipe_config->base.adjusted_mode.flags |= flags; + + if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc) + dotclock = pipe_config->port_clock * 2 / 3; + else + dotclock = pipe_config->port_clock; + + if (pipe_config->pixel_multiplier) + dotclock /= pipe_config->pixel_multiplier; + + if (HAS_PCH_SPLIT(dev_priv->dev)) + ironlake_check_encoder_dotclock(pipe_config, dotclock); + + pipe_config->base.adjusted_mode.crtc_clock = dotclock; +} + +static void intel_enable_hdmi_audio(struct intel_encoder *encoder) +{ + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + + WARN_ON(!crtc->config->has_hdmi_sink); + DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n", + pipe_name(crtc->pipe)); + intel_audio_codec_enable(encoder); +} + +static void g4x_enable_hdmi(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); u32 temp; - u32 enable_bits = SDVO_ENABLE; - - if (intel_hdmi->has_audio) - enable_bits |= SDVO_AUDIO_ENABLE; temp = I915_READ(intel_hdmi->hdmi_reg); - /* HW workaround for IBX, we need to move the port to transcoder A - * before disabling it, so restore the transcoder select bit here. */ - if (HAS_PCH_IBX(dev)) - enable_bits |= SDVO_PIPE_SEL(intel_crtc->pipe); + temp |= SDVO_ENABLE; + if (crtc->config->has_audio) + temp |= SDVO_AUDIO_ENABLE; - /* HW workaround, need to toggle enable bit off and on for 12bpc, but - * we do this anyway which shows more stable in testing. - */ - if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE); - POSTING_READ(intel_hdmi->hdmi_reg); - } + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); + + if (crtc->config->has_audio) + intel_enable_hdmi_audio(encoder); +} + +static void ibx_enable_hdmi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + u32 temp; + + temp = I915_READ(intel_hdmi->hdmi_reg); - temp |= enable_bits; + temp |= SDVO_ENABLE; + if (crtc->config->has_audio) + temp |= SDVO_AUDIO_ENABLE; + /* + * HW workaround, need to write this twice for issue + * that may result in first write getting masked. + */ + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); I915_WRITE(intel_hdmi->hdmi_reg, temp); POSTING_READ(intel_hdmi->hdmi_reg); - /* HW workaround, need to write this twice for issue that may result - * in first write getting masked. + /* + * HW workaround, need to toggle enable bit off and on + * for 12bpc with pixel repeat. + * + * FIXME: BSpec says this should be done at the end of + * of the modeset sequence, so not sure if this isn't too soon. */ - if (HAS_PCH_SPLIT(dev)) { + if (crtc->config->pipe_bpp > 24 && + crtc->config->pixel_multiplier > 1) { + I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE); + POSTING_READ(intel_hdmi->hdmi_reg); + + /* + * HW workaround, need to write this twice for issue + * that may result in first write getting masked. + */ + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); I915_WRITE(intel_hdmi->hdmi_reg, temp); POSTING_READ(intel_hdmi->hdmi_reg); } + + if (crtc->config->has_audio) + intel_enable_hdmi_audio(encoder); } -static void intel_disable_hdmi(struct intel_encoder *encoder) +static void cpt_enable_hdmi(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + enum pipe pipe = crtc->pipe; u32 temp; - u32 enable_bits = SDVO_ENABLE | SDVO_AUDIO_ENABLE; temp = I915_READ(intel_hdmi->hdmi_reg); - /* HW workaround for IBX, we need to move the port to transcoder A - * before disabling it. */ - if (HAS_PCH_IBX(dev)) { - struct drm_crtc *crtc = encoder->base.crtc; - int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; - - if (temp & SDVO_PIPE_B_SELECT) { - temp &= ~SDVO_PIPE_B_SELECT; - I915_WRITE(intel_hdmi->hdmi_reg, temp); - POSTING_READ(intel_hdmi->hdmi_reg); - - /* Again we need to write this twice. */ - I915_WRITE(intel_hdmi->hdmi_reg, temp); - POSTING_READ(intel_hdmi->hdmi_reg); - - /* Transcoder selection bits only update - * effectively on vblank. */ - if (crtc) - intel_wait_for_vblank(dev, pipe); - else - msleep(50); - } - } + temp |= SDVO_ENABLE; + if (crtc->config->has_audio) + temp |= SDVO_AUDIO_ENABLE; - /* HW workaround, need to toggle enable bit off and on for 12bpc, but - * we do this anyway which shows more stable in testing. + /* + * WaEnableHDMI8bpcBefore12bpc:snb,ivb + * + * The procedure for 12bpc is as follows: + * 1. disable HDMI clock gating + * 2. enable HDMI with 8bpc + * 3. enable HDMI with 12bpc + * 4. enable HDMI clock gating */ - if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE); + + if (crtc->config->pipe_bpp > 24) { + I915_WRITE(TRANS_CHICKEN1(pipe), + I915_READ(TRANS_CHICKEN1(pipe)) | + TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE); + + temp &= ~SDVO_COLOR_FORMAT_MASK; + temp |= SDVO_COLOR_FORMAT_8bpc; + } + + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); + + if (crtc->config->pipe_bpp > 24) { + temp &= ~SDVO_COLOR_FORMAT_MASK; + temp |= HDMI_COLOR_FORMAT_12bpc; + + I915_WRITE(intel_hdmi->hdmi_reg, temp); POSTING_READ(intel_hdmi->hdmi_reg); + + I915_WRITE(TRANS_CHICKEN1(pipe), + I915_READ(TRANS_CHICKEN1(pipe)) & + ~TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE); } - temp &= ~enable_bits; + if (crtc->config->has_audio) + intel_enable_hdmi_audio(encoder); +} + +static void vlv_enable_hdmi(struct intel_encoder *encoder) +{ +} + +static void intel_disable_hdmi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + u32 temp; + + temp = I915_READ(intel_hdmi->hdmi_reg); + temp &= ~(SDVO_ENABLE | SDVO_AUDIO_ENABLE); I915_WRITE(intel_hdmi->hdmi_reg, temp); POSTING_READ(intel_hdmi->hdmi_reg); - /* HW workaround, need to write this twice for issue that may result - * in first write getting masked. + /* + * HW workaround for IBX, we need to move the port + * to transcoder A after disabling it to allow the + * matching DP port to be enabled on transcoder A. */ - if (HAS_PCH_SPLIT(dev)) { + if (HAS_PCH_IBX(dev) && crtc->pipe == PIPE_B) { + temp &= ~SDVO_PIPE_B_SELECT; + temp |= SDVO_ENABLE; + /* + * HW workaround, need to write this twice for issue + * that may result in first write getting masked. + */ + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); + I915_WRITE(intel_hdmi->hdmi_reg, temp); + POSTING_READ(intel_hdmi->hdmi_reg); + + temp &= ~SDVO_ENABLE; I915_WRITE(intel_hdmi->hdmi_reg, temp); POSTING_READ(intel_hdmi->hdmi_reg); } + + intel_hdmi->set_infoframes(&encoder->base, false, NULL); } -static int intel_hdmi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) +static void g4x_disable_hdmi(struct intel_encoder *encoder) { - if (mode->clock > 165000) - return MODE_CLOCK_HIGH; - if (mode->clock < 20000) + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + + if (crtc->config->has_audio) + intel_audio_codec_disable(encoder); + + intel_disable_hdmi(encoder); +} + +static void pch_disable_hdmi(struct intel_encoder *encoder) +{ + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + + if (crtc->config->has_audio) + intel_audio_codec_disable(encoder); +} + +static void pch_post_disable_hdmi(struct intel_encoder *encoder) +{ + intel_disable_hdmi(encoder); +} + +static int hdmi_port_clock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit) +{ + struct drm_device *dev = intel_hdmi_to_dev(hdmi); + + if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev)) + return 165000; + else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) + return 300000; + else + return 225000; +} + +static enum drm_mode_status +hdmi_port_clock_valid(struct intel_hdmi *hdmi, + int clock, bool respect_dvi_limit) +{ + struct drm_device *dev = intel_hdmi_to_dev(hdmi); + + if (clock < 25000) return MODE_CLOCK_LOW; + if (clock > hdmi_port_clock_limit(hdmi, respect_dvi_limit)) + return MODE_CLOCK_HIGH; + + /* BXT DPLL can't generate 223-240 MHz */ + if (IS_BROXTON(dev) && clock > 223333 && clock < 240000) + return MODE_CLOCK_RANGE; + + /* CHV DPLL can't generate 216-240 MHz */ + if (IS_CHERRYVIEW(dev) && clock > 216000 && clock < 240000) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + +static enum drm_mode_status +intel_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_hdmi *hdmi = intel_attached_hdmi(connector); + struct drm_device *dev = intel_hdmi_to_dev(hdmi); + enum drm_mode_status status; + int clock; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; - return MODE_OK; + clock = mode->clock; + if (mode->flags & DRM_MODE_FLAG_DBLCLK) + clock *= 2; + + /* check if we can do 8bpc */ + status = hdmi_port_clock_valid(hdmi, clock, true); + + /* if we can't do 8bpc we may still be able to do 12bpc */ + if (!HAS_GMCH_DISPLAY(dev) && status != MODE_OK) + status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true); + + return status; +} + +static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state) +{ + struct drm_device *dev = crtc_state->base.crtc->dev; + struct drm_atomic_state *state; + struct intel_encoder *encoder; + struct drm_connector *connector; + struct drm_connector_state *connector_state; + int count = 0, count_hdmi = 0; + int i; + + if (HAS_GMCH_DISPLAY(dev)) + return false; + + state = crtc_state->base.state; + + for_each_connector_in_state(state, connector, connector_state, i) { + if (connector_state->crtc != crtc_state->base.crtc) + continue; + + encoder = to_intel_encoder(connector_state->best_encoder); + + count_hdmi += encoder->type == INTEL_OUTPUT_HDMI; + count++; + } + + /* + * HDMI 12bpc affects the clocks, so it's only possible + * when not cloning with other encoder types. + */ + return count_hdmi > 0 && count_hdmi == count; } bool intel_hdmi_compute_config(struct intel_encoder *encoder, - struct intel_crtc_config *pipe_config) + struct intel_crtc_state *pipe_config) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); struct drm_device *dev = encoder->base.dev; - struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; + struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock; + int clock_12bpc = clock_8bpc * 3 / 2; + int desired_bpp; + + pipe_config->has_hdmi_sink = intel_hdmi->has_hdmi_sink; + + if (pipe_config->has_hdmi_sink) + pipe_config->has_infoframe = true; if (intel_hdmi->color_range_auto) { /* See CEA-861-E - 5.1 Default Encoding Parameters */ - if (intel_hdmi->has_hdmi_sink && - drm_match_cea_mode(adjusted_mode) > 1) - intel_hdmi->color_range = HDMI_COLOR_RANGE_16_235; - else - intel_hdmi->color_range = 0; + pipe_config->limited_color_range = + pipe_config->has_hdmi_sink && + drm_match_cea_mode(adjusted_mode) > 1; + } else { + pipe_config->limited_color_range = + intel_hdmi->limited_color_range; } - if (intel_hdmi->color_range) - pipe_config->limited_color_range = true; + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) { + pipe_config->pixel_multiplier = 2; + clock_8bpc *= 2; + clock_12bpc *= 2; + } if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev)) pipe_config->has_pch_encoder = true; + if (pipe_config->has_hdmi_sink && intel_hdmi->has_audio) + pipe_config->has_audio = true; + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi - * outputs. + * outputs. We also need to check that the higher clock still fits + * within limits. */ - if (pipe_config->pipe_bpp > 8*3 && HAS_PCH_SPLIT(dev)) { - DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); - pipe_config->pipe_bpp = 12*3; + if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink && + hdmi_port_clock_valid(intel_hdmi, clock_12bpc, false) == MODE_OK && + hdmi_12bpc_possible(pipe_config)) { + DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n"); + desired_bpp = 12*3; + + /* Need to adjust the port link by 1.5x for 12bpc. */ + pipe_config->port_clock = clock_12bpc; } else { - DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); - pipe_config->pipe_bpp = 8*3; + DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n"); + desired_bpp = 8*3; + + pipe_config->port_clock = clock_8bpc; } + if (!pipe_config->bw_constrained) { + DRM_DEBUG_KMS("forcing pipe bpc to %i for HDMI\n", desired_bpp); + pipe_config->pipe_bpp = desired_bpp; + } + + if (hdmi_port_clock_valid(intel_hdmi, pipe_config->port_clock, + false) != MODE_OK) { + DRM_DEBUG_KMS("unsupported HDMI clock, rejecting mode\n"); + return false; + } + + /* Set user selected PAR to incoming mode's member */ + adjusted_mode->picture_aspect_ratio = intel_hdmi->aspect_ratio; + return true; } -static enum drm_connector_status -intel_hdmi_detect(struct drm_connector *connector, bool force) +static void +intel_hdmi_unset_edid(struct drm_connector *connector) { - struct drm_device *dev = connector->dev; struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); - struct intel_digital_port *intel_dig_port = - hdmi_to_dig_port(intel_hdmi); - struct intel_encoder *intel_encoder = &intel_dig_port->base; - struct drm_i915_private *dev_priv = dev->dev_private; - struct edid *edid; - enum drm_connector_status status = connector_status_disconnected; intel_hdmi->has_hdmi_sink = false; intel_hdmi->has_audio = false; intel_hdmi->rgb_quant_range_selectable = false; + + kfree(to_intel_connector(connector)->detect_edid); + to_intel_connector(connector)->detect_edid = NULL; +} + +static bool +intel_hdmi_set_edid(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->dev); + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); + struct edid *edid; + bool connected = false; + + intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); + edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, - intel_hdmi->ddc_bus)); + intel_hdmi->ddc_bus)); - if (edid) { - if (edid->input & DRM_EDID_INPUT_DIGITAL) { - status = connector_status_connected; - if (intel_hdmi->force_audio != HDMI_AUDIO_OFF_DVI) - intel_hdmi->has_hdmi_sink = - drm_detect_hdmi_monitor(edid); - intel_hdmi->has_audio = drm_detect_monitor_audio(edid); - intel_hdmi->rgb_quant_range_selectable = - drm_rgb_quant_range_selectable(edid); - } - kfree(edid); - } + intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS); + + to_intel_connector(connector)->detect_edid = edid; + if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { + intel_hdmi->rgb_quant_range_selectable = + drm_rgb_quant_range_selectable(edid); - if (status == connector_status_connected) { + intel_hdmi->has_audio = drm_detect_monitor_audio(edid); if (intel_hdmi->force_audio != HDMI_AUDIO_AUTO) intel_hdmi->has_audio = - (intel_hdmi->force_audio == HDMI_AUDIO_ON); - intel_encoder->type = INTEL_OUTPUT_HDMI; + intel_hdmi->force_audio == HDMI_AUDIO_ON; + + if (intel_hdmi->force_audio != HDMI_AUDIO_OFF_DVI) + intel_hdmi->has_hdmi_sink = + drm_detect_hdmi_monitor(edid); + + connected = true; } + return connected; +} + +static enum drm_connector_status +intel_hdmi_detect(struct drm_connector *connector, bool force) +{ + enum drm_connector_status status; + struct drm_i915_private *dev_priv = to_i915(connector->dev); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.id, connector->name); + + intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); + + intel_hdmi_unset_edid(connector); + + if (intel_hdmi_set_edid(connector)) { + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); + + hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI; + status = connector_status_connected; + } else + status = connector_status_disconnected; + + intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS); + return status; } -static int intel_hdmi_get_modes(struct drm_connector *connector) +static void +intel_hdmi_force(struct drm_connector *connector) { struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); - struct drm_i915_private *dev_priv = connector->dev->dev_private; - /* We should parse the EDID data and find out if it's an HDMI sink so - * we can send audio to it. - */ + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.id, connector->name); + + intel_hdmi_unset_edid(connector); + + if (connector->status != connector_status_connected) + return; + + intel_hdmi_set_edid(connector); + hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI; +} + +static int intel_hdmi_get_modes(struct drm_connector *connector) +{ + struct edid *edid; + + edid = to_intel_connector(connector)->detect_edid; + if (edid == NULL) + return 0; - return intel_ddc_get_modes(connector, - intel_gmbus_get_adapter(dev_priv, - intel_hdmi->ddc_bus)); + return intel_connector_update_modes(connector, edid); } static bool intel_hdmi_detect_audio(struct drm_connector *connector) { - struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); - struct drm_i915_private *dev_priv = connector->dev->dev_private; - struct edid *edid; bool has_audio = false; + struct edid *edid; - edid = drm_get_edid(connector, - intel_gmbus_get_adapter(dev_priv, - intel_hdmi->ddc_bus)); - if (edid) { - if (edid->input & DRM_EDID_INPUT_DIGITAL) - has_audio = drm_detect_monitor_audio(edid); - kfree(edid); - } + edid = to_intel_connector(connector)->detect_edid; + if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) + has_audio = drm_detect_monitor_audio(edid); return has_audio; } @@ -921,7 +1471,7 @@ if (property == dev_priv->broadcast_rgb_property) { bool old_auto = intel_hdmi->color_range_auto; - uint32_t old_range = intel_hdmi->color_range; + bool old_range = intel_hdmi->limited_color_range; switch (val) { case INTEL_BROADCAST_RGB_AUTO: @@ -929,23 +1479,40 @@ break; case INTEL_BROADCAST_RGB_FULL: intel_hdmi->color_range_auto = false; - intel_hdmi->color_range = 0; + intel_hdmi->limited_color_range = false; break; case INTEL_BROADCAST_RGB_LIMITED: intel_hdmi->color_range_auto = false; - intel_hdmi->color_range = HDMI_COLOR_RANGE_16_235; + intel_hdmi->limited_color_range = true; break; default: return -EINVAL; } if (old_auto == intel_hdmi->color_range_auto && - old_range == intel_hdmi->color_range) + old_range == intel_hdmi->limited_color_range) return 0; goto done; } + if (property == connector->dev->mode_config.aspect_ratio_property) { + switch (val) { + case DRM_MODE_PICTURE_ASPECT_NONE: + intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; + break; + case DRM_MODE_PICTURE_ASPECT_4_3: + intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_4_3; + break; + case DRM_MODE_PICTURE_ASPECT_16_9: + intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_16_9; + break; + default: + return -EINVAL; + } + goto done; + } + return -EINVAL; done: @@ -955,23 +1522,459 @@ return 0; } +static void intel_hdmi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode; + + intel_hdmi_prepare(encoder); + + intel_hdmi->set_infoframes(&encoder->base, + intel_crtc->config->has_hdmi_sink, + adjusted_mode); +} + +static void vlv_hdmi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct intel_hdmi *intel_hdmi = &dport->hdmi; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode; + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + u32 val; + + /* Enable clock channels for this port */ + mutex_lock(&dev_priv->sb_lock); + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port)); + val = 0; + if (pipe) + val |= (1<<21); + else + val &= ~(1<<21); + val |= 0x001000c4; + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val); + + /* HDMI 1.0V-2dB */ + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), 0x2b245f5f); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), 0x5578b83a); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0c782040); + vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), 0x2b247878); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000); + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN); + + /* Program lane clock */ + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888); + mutex_unlock(&dev_priv->sb_lock); + + intel_hdmi->set_infoframes(&encoder->base, + intel_crtc->config->has_hdmi_sink, + adjusted_mode); + + g4x_enable_hdmi(encoder); + + vlv_wait_port_ready(dev_priv, dport, 0x0); +} + +static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + + intel_hdmi_prepare(encoder); + + /* Program Tx lane resets to default */ + mutex_lock(&dev_priv->sb_lock); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), + DPIO_PCS_TX_LANE2_RESET | + DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), + DPIO_PCS_CLK_CRI_RXEB_EIOS_EN | + DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN | + (1<sb_lock); +} + +static void chv_data_lane_soft_reset(struct intel_encoder *encoder, + bool reset) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base)); + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + enum pipe pipe = crtc->pipe; + uint32_t val; + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); + if (reset) + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + else + val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); + + if (crtc->config->lane_count > 2) { + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); + if (reset) + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + else + val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); + } + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + if (reset) + val &= ~DPIO_PCS_CLK_SOFT_RESET; + else + val |= DPIO_PCS_CLK_SOFT_RESET; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); + + if (crtc->config->lane_count > 2) { + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + if (reset) + val &= ~DPIO_PCS_CLK_SOFT_RESET; + else + val |= DPIO_PCS_CLK_SOFT_RESET; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); + } +} + +static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + u32 val; + + intel_hdmi_prepare(encoder); + + /* + * Must trick the second common lane into life. + * Otherwise we can't even access the PLL. + */ + if (ch == DPIO_CH0 && pipe == PIPE_B) + dport->release_cl2_override = + !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true); + + chv_phy_powergate_lanes(encoder, true, 0x0); + + mutex_lock(&dev_priv->sb_lock); + + /* Assert data lane reset */ + chv_data_lane_soft_reset(encoder, true); + + /* program left/right clock distribution */ + if (pipe != PIPE_B) { + val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0); + val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK); + if (ch == DPIO_CH0) + val |= CHV_BUFLEFTENA1_FORCE; + if (ch == DPIO_CH1) + val |= CHV_BUFRIGHTENA1_FORCE; + vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val); + } else { + val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1); + val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK); + if (ch == DPIO_CH0) + val |= CHV_BUFLEFTENA2_FORCE; + if (ch == DPIO_CH1) + val |= CHV_BUFRIGHTENA2_FORCE; + vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val); + } + + /* program clock channel usage */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val); + + /* + * This a a bit weird since generally CL + * matches the pipe, but here we need to + * pick the CL based on the port. + */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch)); + if (pipe != PIPE_B) + val &= ~CHV_CMN_USEDCLKCHANNEL; + else + val |= CHV_CMN_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val); + + mutex_unlock(&dev_priv->sb_lock); +} + +static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe; + u32 val; + + mutex_lock(&dev_priv->sb_lock); + + /* disable left/right clock distribution */ + if (pipe != PIPE_B) { + val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0); + val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK); + vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val); + } else { + val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1); + val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK); + vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val); + } + + mutex_unlock(&dev_priv->sb_lock); + + /* + * Leave the power down bit cleared for at least one + * lane so that chv_powergate_phy_ch() will power + * on something when the channel is otherwise unused. + * When the port is off and the override is removed + * the lanes power down anyway, so otherwise it doesn't + * really matter what the state of power down bits is + * after this. + */ + chv_phy_powergate_lanes(encoder, false, 0x0); +} + +static void vlv_hdmi_post_disable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + + /* Reset lanes to avoid HDMI flicker (VLV w/a) */ + mutex_lock(&dev_priv->sb_lock); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), 0x00000000); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), 0x00e00060); + mutex_unlock(&dev_priv->sb_lock); +} + +static void chv_hdmi_post_disable(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_lock(&dev_priv->sb_lock); + + /* Assert data lane reset */ + chv_data_lane_soft_reset(encoder, true); + + mutex_unlock(&dev_priv->sb_lock); +} + +static void chv_hdmi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct intel_hdmi *intel_hdmi = &dport->hdmi; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode; + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + int data, i, stagger; + u32 val; + + mutex_lock(&dev_priv->sb_lock); + + /* allow hardware to manage TX FIFO reset source */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch)); + val &= ~DPIO_LANEDESKEW_STRAP_OVRD; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch)); + val &= ~DPIO_LANEDESKEW_STRAP_OVRD; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val); + + /* Program Tx latency optimal setting */ + for (i = 0; i < 4; i++) { + /* Set the upar bit */ + data = (i == 1) ? 0x0 : 0x1; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), + data << DPIO_UPAR_SHIFT); + } + + /* Data lane stagger programming */ + if (intel_crtc->config->port_clock > 270000) + stagger = 0x18; + else if (intel_crtc->config->port_clock > 135000) + stagger = 0xd; + else if (intel_crtc->config->port_clock > 67500) + stagger = 0x7; + else if (intel_crtc->config->port_clock > 33750) + stagger = 0x4; + else + stagger = 0x2; + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch)); + val |= DPIO_TX2_STAGGER_MASK(0x1f); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch)); + val |= DPIO_TX2_STAGGER_MASK(0x1f); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val); + + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch), + DPIO_LANESTAGGER_STRAP(stagger) | + DPIO_LANESTAGGER_STRAP_OVRD | + DPIO_TX1_STAGGER_MASK(0x1f) | + DPIO_TX1_STAGGER_MULT(6) | + DPIO_TX2_STAGGER_MULT(0)); + + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch), + DPIO_LANESTAGGER_STRAP(stagger) | + DPIO_LANESTAGGER_STRAP_OVRD | + DPIO_TX1_STAGGER_MASK(0x1f) | + DPIO_TX1_STAGGER_MULT(7) | + DPIO_TX2_STAGGER_MULT(5)); + + /* Deassert data lane reset */ + chv_data_lane_soft_reset(encoder, false); + + /* Clear calc init */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch)); + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch)); + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val); + + /* FIXME: Program the support xxx V-dB */ + /* Use 800mV-0dB */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i)); + val &= ~DPIO_SWING_DEEMPH9P5_MASK; + val |= 128 << DPIO_SWING_DEEMPH9P5_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val); + } + + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); + + val &= ~DPIO_SWING_MARGIN000_MASK; + val |= 102 << DPIO_SWING_MARGIN000_SHIFT; + + /* + * Supposedly this value shouldn't matter when unique transition + * scale is disabled, but in fact it does matter. Let's just + * always program the same value and hope it's OK. + */ + val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT); + val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT; + + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); + } + + /* + * The document said it needs to set bit 27 for ch0 and bit 26 + * for ch1. Might be a typo in the doc. + * For now, for this unique transition scale selection, set bit + * 27 for ch0 and ch1. + */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); + } + + /* Start swing calculation */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + mutex_unlock(&dev_priv->sb_lock); + + intel_hdmi->set_infoframes(&encoder->base, + intel_crtc->config->has_hdmi_sink, + adjusted_mode); + + g4x_enable_hdmi(encoder); + + vlv_wait_port_ready(dev_priv, dport, 0x0); + + /* Second common lane will stay alive on its own now */ + if (dport->release_cl2_override) { + chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false); + dport->release_cl2_override = false; + } +} + static void intel_hdmi_destroy(struct drm_connector *connector) { - drm_sysfs_connector_remove(connector); + kfree(to_intel_connector(connector)->detect_edid); drm_connector_cleanup(connector); kfree(connector); } -static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = { - .mode_set = intel_hdmi_mode_set, -}; - static const struct drm_connector_funcs intel_hdmi_connector_funcs = { - .dpms = intel_connector_dpms, + .dpms = drm_atomic_helper_connector_dpms, .detect = intel_hdmi_detect, + .force = intel_hdmi_force, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_hdmi_set_property, + .atomic_get_property = intel_connector_atomic_get_property, .destroy = intel_hdmi_destroy, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, }; static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = { @@ -990,6 +1993,52 @@ intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); intel_hdmi->color_range_auto = true; + intel_attach_aspect_ratio_property(connector); + intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; +} + +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; } void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, @@ -1002,59 +2051,77 @@ struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_dig_port->port; + DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", + port_name(port)); + drm_connector_init(dev, connector, &intel_hdmi_connector_funcs, DRM_MODE_CONNECTOR_HDMIA); drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs); connector->interlace_allowed = 1; connector->doublescan_allowed = 0; + connector->stereo_allowed = 1; + + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); switch (port) { case PORT_B: - intel_hdmi->ddc_bus = GMBUS_PORT_DPB; - intel_encoder->hpd_pin = HPD_PORT_B; + /* + * On BXT A0/A1, sw needs to activate DDIA HPD logic and + * interrupts to check the external panel connection. + */ + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0)) + intel_encoder->hpd_pin = HPD_PORT_A; + else + intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - intel_hdmi->ddc_bus = GMBUS_PORT_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - intel_hdmi->ddc_bus = GMBUS_PORT_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ + case PORT_E: + intel_encoder->hpd_pin = HPD_PORT_E; + break; default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev)) { intel_hdmi->write_infoframe = vlv_write_infoframe; intel_hdmi->set_infoframes = vlv_set_infoframes; - } else if (!HAS_PCH_SPLIT(dev)) { + intel_hdmi->infoframe_enabled = vlv_infoframe_enabled; + } else if (IS_G4X(dev)) { intel_hdmi->write_infoframe = g4x_write_infoframe; intel_hdmi->set_infoframes = g4x_set_infoframes; + intel_hdmi->infoframe_enabled = g4x_infoframe_enabled; } else if (HAS_DDI(dev)) { intel_hdmi->write_infoframe = hsw_write_infoframe; intel_hdmi->set_infoframes = hsw_set_infoframes; + intel_hdmi->infoframe_enabled = hsw_infoframe_enabled; } else if (HAS_PCH_IBX(dev)) { intel_hdmi->write_infoframe = ibx_write_infoframe; intel_hdmi->set_infoframes = ibx_set_infoframes; + intel_hdmi->infoframe_enabled = ibx_infoframe_enabled; } else { intel_hdmi->write_infoframe = cpt_write_infoframe; intel_hdmi->set_infoframes = cpt_set_infoframes; + intel_hdmi->infoframe_enabled = cpt_infoframe_enabled; } if (HAS_DDI(dev)) intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; else intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_connector->unregister = intel_connector_unregister; intel_hdmi_add_properties(intel_hdmi, connector); intel_connector_attach_encoder(intel_connector, intel_encoder); - drm_sysfs_connector_add(connector); + drm_connector_register(connector); + intel_hdmi->attached_connector = intel_connector; /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written * 0xd. Failure to do so will result in spurious interrupts being @@ -1070,34 +2137,70 @@ { struct intel_digital_port *intel_dig_port; struct intel_encoder *intel_encoder; - struct drm_encoder *encoder; struct intel_connector *intel_connector; - intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL); + intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); if (!intel_dig_port) return; - intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); + intel_connector = intel_connector_alloc(); if (!intel_connector) { kfree(intel_dig_port); return; } intel_encoder = &intel_dig_port->base; - encoder = &intel_encoder->base; drm_encoder_init(dev, &intel_encoder->base, &intel_hdmi_enc_funcs, DRM_MODE_ENCODER_TMDS); - drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs); intel_encoder->compute_config = intel_hdmi_compute_config; - intel_encoder->enable = intel_enable_hdmi; - intel_encoder->disable = intel_disable_hdmi; + if (HAS_PCH_SPLIT(dev)) { + intel_encoder->disable = pch_disable_hdmi; + intel_encoder->post_disable = pch_post_disable_hdmi; + } else { + intel_encoder->disable = g4x_disable_hdmi; + } intel_encoder->get_hw_state = intel_hdmi_get_hw_state; + intel_encoder->get_config = intel_hdmi_get_config; + if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable; + intel_encoder->pre_enable = chv_hdmi_pre_enable; + intel_encoder->enable = vlv_enable_hdmi; + intel_encoder->post_disable = chv_hdmi_post_disable; + intel_encoder->post_pll_disable = chv_hdmi_post_pll_disable; + } else if (IS_VALLEYVIEW(dev)) { + intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable; + intel_encoder->pre_enable = vlv_hdmi_pre_enable; + intel_encoder->enable = vlv_enable_hdmi; + intel_encoder->post_disable = vlv_hdmi_post_disable; + } else { + intel_encoder->pre_enable = intel_hdmi_pre_enable; + if (HAS_PCH_CPT(dev)) + intel_encoder->enable = cpt_enable_hdmi; + else if (HAS_PCH_IBX(dev)) + intel_encoder->enable = ibx_enable_hdmi; + else + intel_encoder->enable = g4x_enable_hdmi; + } intel_encoder->type = INTEL_OUTPUT_HDMI; - intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); - intel_encoder->cloneable = false; + if (IS_CHERRYVIEW(dev)) { + if (port == PORT_D) + intel_encoder->crtc_mask = 1 << 2; + else + intel_encoder->crtc_mask = (1 << 0) | (1 << 1); + } else { + intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); + } + intel_encoder->cloneable = 1 << INTEL_OUTPUT_ANALOG; + /* + * BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems + * to work on real hardware. And since g4x can send infoframes to + * only one port anyway, nothing is lost by allowing it. + */ + if (IS_G4X(dev)) + intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI; intel_dig_port->port = port; intel_dig_port->hdmi.hdmi_reg = hdmi_reg;