--- zzzz-none-000/linux-3.10.107/drivers/gpu/drm/i915/intel_opregion.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/gpu/drm/i915/intel_opregion.c 2021-02-04 17:41:59.000000000 +0000 @@ -25,10 +25,7 @@ * */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include -#include #include #include @@ -36,8 +33,11 @@ #include "i915_drv.h" #include "intel_drv.h" -#define PCI_ASLE 0xe4 -#define PCI_ASLS 0xfc +#define PCI_ASLE 0xe4 +#define PCI_ASLS 0xfc +#define PCI_SWSCI 0xe8 +#define PCI_SWSCI_SCISEL (1 << 15) +#define PCI_SWSCI_GSSCIE (1 << 0) #define OPREGION_HEADER_OFFSET 0 #define OPREGION_ACPI_OFFSET 0x100 @@ -51,6 +51,7 @@ #define MBOX_ACPI (1<<0) #define MBOX_SWSCI (1<<1) #define MBOX_ASLE (1<<2) +#define MBOX_ASLE_EXT (1<<4) struct opregion_header { u8 signature[16]; @@ -60,8 +61,11 @@ u8 vbios_ver[16]; u8 driver_ver[16]; u32 mboxes; - u8 reserved[164]; -} __attribute__((packed)); + u32 driver_model; + u32 pcon; + u8 dver[32]; + u8 rsvd[124]; +} __packed; /* OpRegion mailbox #1: public ACPI methods */ struct opregion_acpi { @@ -82,8 +86,10 @@ u32 evts; /* ASL supported events */ u32 cnot; /* current OS notification */ u32 nrdy; /* driver status */ - u8 rsvd2[60]; -} __attribute__((packed)); + u32 did2[7]; /* extended supported display devices ID list */ + u32 cpd2[7]; /* extended attached display devices list */ + u8 rsvd2[4]; +} __packed; /* OpRegion mailbox #2: SWSCI */ struct opregion_swsci { @@ -91,7 +97,7 @@ u32 parm; /* command parameters */ u32 dslp; /* driver sleep time-out */ u8 rsvd[244]; -} __attribute__((packed)); +} __packed; /* OpRegion mailbox #3: ASLE */ struct opregion_asle { @@ -107,21 +113,47 @@ u32 epfm; /* enabled panel fitting modes */ u8 plut[74]; /* panel LUT and identifier */ u32 pfmb; /* PWM freq and min brightness */ - u8 rsvd[102]; -} __attribute__((packed)); - -/* ASLE irq request bits */ -#define ASLE_SET_ALS_ILLUM (1 << 0) -#define ASLE_SET_BACKLIGHT (1 << 1) -#define ASLE_SET_PFIT (1 << 2) -#define ASLE_SET_PWM_FREQ (1 << 3) -#define ASLE_REQ_MSK 0xf - -/* response bits of ASLE irq request */ -#define ASLE_ALS_ILLUM_FAILED (1<<10) -#define ASLE_BACKLIGHT_FAILED (1<<12) -#define ASLE_PFIT_FAILED (1<<14) -#define ASLE_PWM_FREQ_FAILED (1<<16) + u32 cddv; /* color correction default values */ + u32 pcft; /* power conservation features */ + u32 srot; /* supported rotation angles */ + u32 iuer; /* IUER events */ + u64 fdss; + u32 fdsp; + u32 stat; + u8 rsvd[70]; +} __packed; + +/* Driver readiness indicator */ +#define ASLE_ARDY_READY (1 << 0) +#define ASLE_ARDY_NOT_READY (0 << 0) + +/* ASLE Interrupt Command (ASLC) bits */ +#define ASLC_SET_ALS_ILLUM (1 << 0) +#define ASLC_SET_BACKLIGHT (1 << 1) +#define ASLC_SET_PFIT (1 << 2) +#define ASLC_SET_PWM_FREQ (1 << 3) +#define ASLC_SUPPORTED_ROTATION_ANGLES (1 << 4) +#define ASLC_BUTTON_ARRAY (1 << 5) +#define ASLC_CONVERTIBLE_INDICATOR (1 << 6) +#define ASLC_DOCKING_INDICATOR (1 << 7) +#define ASLC_ISCT_STATE_CHANGE (1 << 8) +#define ASLC_REQ_MSK 0x1ff +/* response bits */ +#define ASLC_ALS_ILLUM_FAILED (1 << 10) +#define ASLC_BACKLIGHT_FAILED (1 << 12) +#define ASLC_PFIT_FAILED (1 << 14) +#define ASLC_PWM_FREQ_FAILED (1 << 16) +#define ASLC_ROTATION_ANGLES_FAILED (1 << 18) +#define ASLC_BUTTON_ARRAY_FAILED (1 << 20) +#define ASLC_CONVERTIBLE_FAILED (1 << 22) +#define ASLC_DOCKING_FAILED (1 << 24) +#define ASLC_ISCT_STATE_FAILED (1 << 26) + +/* Technology enabled indicator */ +#define ASLE_TCHE_ALS_EN (1 << 0) +#define ASLE_TCHE_BLC_EN (1 << 1) +#define ASLE_TCHE_PFIT_EN (1 << 2) +#define ASLE_TCHE_PFMB_EN (1 << 3) /* ASLE backlight brightness to set */ #define ASLE_BCLP_VALID (1<<31) @@ -141,31 +173,274 @@ #define ASLE_CBLV_VALID (1<<31) +/* IUER */ +#define ASLE_IUER_DOCKING (1 << 7) +#define ASLE_IUER_CONVERTIBLE (1 << 6) +#define ASLE_IUER_ROTATION_LOCK_BTN (1 << 4) +#define ASLE_IUER_VOLUME_DOWN_BTN (1 << 3) +#define ASLE_IUER_VOLUME_UP_BTN (1 << 2) +#define ASLE_IUER_WINDOWS_BTN (1 << 1) +#define ASLE_IUER_POWER_BTN (1 << 0) + +/* Software System Control Interrupt (SWSCI) */ +#define SWSCI_SCIC_INDICATOR (1 << 0) +#define SWSCI_SCIC_MAIN_FUNCTION_SHIFT 1 +#define SWSCI_SCIC_MAIN_FUNCTION_MASK (0xf << 1) +#define SWSCI_SCIC_SUB_FUNCTION_SHIFT 8 +#define SWSCI_SCIC_SUB_FUNCTION_MASK (0xff << 8) +#define SWSCI_SCIC_EXIT_PARAMETER_SHIFT 8 +#define SWSCI_SCIC_EXIT_PARAMETER_MASK (0xff << 8) +#define SWSCI_SCIC_EXIT_STATUS_SHIFT 5 +#define SWSCI_SCIC_EXIT_STATUS_MASK (7 << 5) +#define SWSCI_SCIC_EXIT_STATUS_SUCCESS 1 + +#define SWSCI_FUNCTION_CODE(main, sub) \ + ((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \ + (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT) + +/* SWSCI: Get BIOS Data (GBDA) */ +#define SWSCI_GBDA 4 +#define SWSCI_GBDA_SUPPORTED_CALLS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0) +#define SWSCI_GBDA_REQUESTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1) +#define SWSCI_GBDA_BOOT_DISPLAY_PREF SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4) +#define SWSCI_GBDA_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5) +#define SWSCI_GBDA_TV_STANDARD SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6) +#define SWSCI_GBDA_INTERNAL_GRAPHICS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7) +#define SWSCI_GBDA_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10) + +/* SWSCI: System BIOS Callbacks (SBCB) */ +#define SWSCI_SBCB 6 +#define SWSCI_SBCB_SUPPORTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0) +#define SWSCI_SBCB_INIT_COMPLETION SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1) +#define SWSCI_SBCB_PRE_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3) +#define SWSCI_SBCB_POST_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4) +#define SWSCI_SBCB_DISPLAY_SWITCH SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5) +#define SWSCI_SBCB_SET_TV_FORMAT SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6) +#define SWSCI_SBCB_ADAPTER_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7) +#define SWSCI_SBCB_DISPLAY_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8) +#define SWSCI_SBCB_SET_BOOT_DISPLAY SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9) +#define SWSCI_SBCB_SET_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10) +#define SWSCI_SBCB_SET_INTERNAL_GFX SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11) +#define SWSCI_SBCB_POST_HIRES_TO_DOS_FS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16) +#define SWSCI_SBCB_SUSPEND_RESUME SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17) +#define SWSCI_SBCB_SET_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18) +#define SWSCI_SBCB_POST_VBE_PM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19) +#define SWSCI_SBCB_ENABLE_DISABLE_AUDIO SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21) + #define ACPI_OTHER_OUTPUT (0<<8) #define ACPI_VGA_OUTPUT (1<<8) #define ACPI_TV_OUTPUT (2<<8) #define ACPI_DIGITAL_OUTPUT (3<<8) #define ACPI_LVDS_OUTPUT (4<<8) +#define MAX_DSLP 1500 + #ifdef CONFIG_ACPI +static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_swsci *swsci = dev_priv->opregion.swsci; + u32 main_function, sub_function, scic; + u16 pci_swsci; + u32 dslp; + + if (!swsci) + return -ENODEV; + + main_function = (function & SWSCI_SCIC_MAIN_FUNCTION_MASK) >> + SWSCI_SCIC_MAIN_FUNCTION_SHIFT; + sub_function = (function & SWSCI_SCIC_SUB_FUNCTION_MASK) >> + SWSCI_SCIC_SUB_FUNCTION_SHIFT; + + /* Check if we can call the function. See swsci_setup for details. */ + if (main_function == SWSCI_SBCB) { + if ((dev_priv->opregion.swsci_sbcb_sub_functions & + (1 << sub_function)) == 0) + return -EINVAL; + } else if (main_function == SWSCI_GBDA) { + if ((dev_priv->opregion.swsci_gbda_sub_functions & + (1 << sub_function)) == 0) + return -EINVAL; + } + + /* Driver sleep timeout in ms. */ + dslp = swsci->dslp; + if (!dslp) { + /* The spec says 2ms should be the default, but it's too small + * for some machines. */ + dslp = 50; + } else if (dslp > MAX_DSLP) { + /* Hey bios, trust must be earned. */ + DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, " + "using %u ms instead\n", dslp, MAX_DSLP); + dslp = MAX_DSLP; + } + + /* The spec tells us to do this, but we are the only user... */ + scic = swsci->scic; + if (scic & SWSCI_SCIC_INDICATOR) { + DRM_DEBUG_DRIVER("SWSCI request already in progress\n"); + return -EBUSY; + } + + scic = function | SWSCI_SCIC_INDICATOR; + + swsci->parm = parm; + swsci->scic = scic; + + /* Ensure SCI event is selected and event trigger is cleared. */ + pci_read_config_word(dev->pdev, PCI_SWSCI, &pci_swsci); + if (!(pci_swsci & PCI_SWSCI_SCISEL) || (pci_swsci & PCI_SWSCI_GSSCIE)) { + pci_swsci |= PCI_SWSCI_SCISEL; + pci_swsci &= ~PCI_SWSCI_GSSCIE; + pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci); + } + + /* Use event trigger to tell bios to check the mail. */ + pci_swsci |= PCI_SWSCI_GSSCIE; + pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci); + + /* Poll for the result. */ +#define C (((scic = swsci->scic) & SWSCI_SCIC_INDICATOR) == 0) + if (wait_for(C, dslp)) { + DRM_DEBUG_DRIVER("SWSCI request timed out\n"); + return -ETIMEDOUT; + } + + scic = (scic & SWSCI_SCIC_EXIT_STATUS_MASK) >> + SWSCI_SCIC_EXIT_STATUS_SHIFT; + + /* Note: scic == 0 is an error! */ + if (scic != SWSCI_SCIC_EXIT_STATUS_SUCCESS) { + DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic); + return -EIO; + } + + if (parm_out) + *parm_out = swsci->parm; + + return 0; + +#undef C +} + +#define DISPLAY_TYPE_CRT 0 +#define DISPLAY_TYPE_TV 1 +#define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL 2 +#define DISPLAY_TYPE_INTERNAL_FLAT_PANEL 3 + +int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, + bool enable) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 parm = 0; + u32 type = 0; + u32 port; + + /* don't care about old stuff for now */ + if (!HAS_DDI(dev)) + return 0; + + if (intel_encoder->type == INTEL_OUTPUT_DSI) + port = 0; + else + port = intel_ddi_get_encoder_port(intel_encoder); + + if (port == PORT_E) { + port = 0; + } else { + parm |= 1 << port; + port++; + } + + if (!enable) + parm |= 4 << 8; + + switch (intel_encoder->type) { + case INTEL_OUTPUT_ANALOG: + type = DISPLAY_TYPE_CRT; + break; + case INTEL_OUTPUT_UNKNOWN: + case INTEL_OUTPUT_DISPLAYPORT: + case INTEL_OUTPUT_HDMI: + case INTEL_OUTPUT_DP_MST: + type = DISPLAY_TYPE_EXTERNAL_FLAT_PANEL; + break; + case INTEL_OUTPUT_EDP: + case INTEL_OUTPUT_DSI: + type = DISPLAY_TYPE_INTERNAL_FLAT_PANEL; + break; + default: + WARN_ONCE(1, "unsupported intel_encoder type %d\n", + intel_encoder->type); + return -EINVAL; + } + + parm |= type << (16 + port * 3); + + return swsci(dev, SWSCI_SBCB_DISPLAY_POWER_STATE, parm, NULL); +} + +static const struct { + pci_power_t pci_power_state; + u32 parm; +} power_state_map[] = { + { PCI_D0, 0x00 }, + { PCI_D1, 0x01 }, + { PCI_D2, 0x02 }, + { PCI_D3hot, 0x04 }, + { PCI_D3cold, 0x04 }, +}; + +int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state) +{ + int i; + + if (!HAS_DDI(dev)) + return 0; + + for (i = 0; i < ARRAY_SIZE(power_state_map); i++) { + if (state == power_state_map[i].pci_power_state) + return swsci(dev, SWSCI_SBCB_ADAPTER_POWER_STATE, + power_state_map[i].parm, NULL); + } + + return -EINVAL; +} + static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) { struct drm_i915_private *dev_priv = dev->dev_private; - struct opregion_asle __iomem *asle = dev_priv->opregion.asle; - u32 max; + struct intel_connector *intel_connector; + struct opregion_asle *asle = dev_priv->opregion.asle; DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp); + if (acpi_video_get_backlight_type() == acpi_backlight_native) { + DRM_DEBUG_KMS("opregion backlight request ignored\n"); + return 0; + } + if (!(bclp & ASLE_BCLP_VALID)) - return ASLE_BACKLIGHT_FAILED; + return ASLC_BACKLIGHT_FAILED; bclp &= ASLE_BCLP_MSK; if (bclp > 255) - return ASLE_BACKLIGHT_FAILED; + return ASLC_BACKLIGHT_FAILED; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + + /* + * Update backlight on all connectors that support backlight (usually + * only one). + */ + DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp); + list_for_each_entry(intel_connector, &dev->mode_config.connector_list, base.head) + intel_panel_set_backlight_acpi(intel_connector, bclp, 255); + asle->cblv = DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID; + + drm_modeset_unlock(&dev->mode_config.connection_mutex); - max = intel_panel_get_max_backlight(dev); - intel_panel_set_backlight(dev, bclp * max / 255); - iowrite32((bclp*0x64)/0xff | ASLE_CBLV_VALID, &asle->cblv); return 0; } @@ -174,119 +449,133 @@ { /* alsi is the current ALS reading in lux. 0 indicates below sensor range, 0xffff indicates above sensor range. 1-0xfffe are valid */ - return 0; + DRM_DEBUG_DRIVER("Illum is not supported\n"); + return ASLC_ALS_ILLUM_FAILED; } static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb) { - struct drm_i915_private *dev_priv = dev->dev_private; - if (pfmb & ASLE_PFMB_PWM_VALID) { - u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL); - u32 pwm = pfmb & ASLE_PFMB_PWM_MASK; - blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK; - pwm = pwm >> 9; - /* FIXME - what do we do with the PWM? */ - } - return 0; + DRM_DEBUG_DRIVER("PWM freq is not supported\n"); + return ASLC_PWM_FREQ_FAILED; } static u32 asle_set_pfit(struct drm_device *dev, u32 pfit) { /* Panel fitting is currently controlled by the X code, so this is a noop until modesetting support works fully */ - if (!(pfit & ASLE_PFIT_VALID)) - return ASLE_PFIT_FAILED; - return 0; + DRM_DEBUG_DRIVER("Pfit is not supported\n"); + return ASLC_PFIT_FAILED; } -void intel_opregion_asle_intr(struct drm_device *dev) +static u32 asle_set_supported_rotation_angles(struct drm_device *dev, u32 srot) { - struct drm_i915_private *dev_priv = dev->dev_private; - struct opregion_asle __iomem *asle = dev_priv->opregion.asle; - u32 asle_stat = 0; - u32 asle_req; - - if (!asle) - return; + DRM_DEBUG_DRIVER("SROT is not supported\n"); + return ASLC_ROTATION_ANGLES_FAILED; +} - asle_req = ioread32(&asle->aslc) & ASLE_REQ_MSK; +static u32 asle_set_button_array(struct drm_device *dev, u32 iuer) +{ + if (!iuer) + DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n"); + if (iuer & ASLE_IUER_ROTATION_LOCK_BTN) + DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n"); + if (iuer & ASLE_IUER_VOLUME_DOWN_BTN) + DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n"); + if (iuer & ASLE_IUER_VOLUME_UP_BTN) + DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n"); + if (iuer & ASLE_IUER_WINDOWS_BTN) + DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n"); + if (iuer & ASLE_IUER_POWER_BTN) + DRM_DEBUG_DRIVER("Button array event is not supported (power)\n"); - if (!asle_req) { - DRM_DEBUG_DRIVER("non asle set request??\n"); - return; - } + return ASLC_BUTTON_ARRAY_FAILED; +} - if (asle_req & ASLE_SET_ALS_ILLUM) - asle_stat |= asle_set_als_illum(dev, ioread32(&asle->alsi)); +static u32 asle_set_convertible(struct drm_device *dev, u32 iuer) +{ + if (iuer & ASLE_IUER_CONVERTIBLE) + DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n"); + else + DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n"); - if (asle_req & ASLE_SET_BACKLIGHT) - asle_stat |= asle_set_backlight(dev, ioread32(&asle->bclp)); + return ASLC_CONVERTIBLE_FAILED; +} - if (asle_req & ASLE_SET_PFIT) - asle_stat |= asle_set_pfit(dev, ioread32(&asle->pfit)); +static u32 asle_set_docking(struct drm_device *dev, u32 iuer) +{ + if (iuer & ASLE_IUER_DOCKING) + DRM_DEBUG_DRIVER("Docking is not supported (docked)\n"); + else + DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n"); - if (asle_req & ASLE_SET_PWM_FREQ) - asle_stat |= asle_set_pwm_freq(dev, ioread32(&asle->pfmb)); + return ASLC_DOCKING_FAILED; +} - iowrite32(asle_stat, &asle->aslc); +static u32 asle_isct_state(struct drm_device *dev) +{ + DRM_DEBUG_DRIVER("ISCT is not supported\n"); + return ASLC_ISCT_STATE_FAILED; } -void intel_opregion_gse_intr(struct drm_device *dev) +static void asle_work(struct work_struct *work) { - struct drm_i915_private *dev_priv = dev->dev_private; - struct opregion_asle __iomem *asle = dev_priv->opregion.asle; - u32 asle_stat = 0; - u32 asle_req; + struct intel_opregion *opregion = + container_of(work, struct intel_opregion, asle_work); + struct drm_i915_private *dev_priv = + container_of(opregion, struct drm_i915_private, opregion); + struct drm_device *dev = dev_priv->dev; + struct opregion_asle *asle = dev_priv->opregion.asle; + u32 aslc_stat = 0; + u32 aslc_req; if (!asle) return; - asle_req = ioread32(&asle->aslc) & ASLE_REQ_MSK; + aslc_req = asle->aslc; - if (!asle_req) { - DRM_DEBUG_DRIVER("non asle set request??\n"); + if (!(aslc_req & ASLC_REQ_MSK)) { + DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n", + aslc_req); return; } - if (asle_req & ASLE_SET_ALS_ILLUM) { - DRM_DEBUG_DRIVER("Illum is not supported\n"); - asle_stat |= ASLE_ALS_ILLUM_FAILED; - } + if (aslc_req & ASLC_SET_ALS_ILLUM) + aslc_stat |= asle_set_als_illum(dev, asle->alsi); - if (asle_req & ASLE_SET_BACKLIGHT) - asle_stat |= asle_set_backlight(dev, ioread32(&asle->bclp)); + if (aslc_req & ASLC_SET_BACKLIGHT) + aslc_stat |= asle_set_backlight(dev, asle->bclp); - if (asle_req & ASLE_SET_PFIT) { - DRM_DEBUG_DRIVER("Pfit is not supported\n"); - asle_stat |= ASLE_PFIT_FAILED; - } + if (aslc_req & ASLC_SET_PFIT) + aslc_stat |= asle_set_pfit(dev, asle->pfit); - if (asle_req & ASLE_SET_PWM_FREQ) { - DRM_DEBUG_DRIVER("PWM freq is not supported\n"); - asle_stat |= ASLE_PWM_FREQ_FAILED; - } + if (aslc_req & ASLC_SET_PWM_FREQ) + aslc_stat |= asle_set_pwm_freq(dev, asle->pfmb); + + if (aslc_req & ASLC_SUPPORTED_ROTATION_ANGLES) + aslc_stat |= asle_set_supported_rotation_angles(dev, + asle->srot); + + if (aslc_req & ASLC_BUTTON_ARRAY) + aslc_stat |= asle_set_button_array(dev, asle->iuer); + + if (aslc_req & ASLC_CONVERTIBLE_INDICATOR) + aslc_stat |= asle_set_convertible(dev, asle->iuer); - iowrite32(asle_stat, &asle->aslc); + if (aslc_req & ASLC_DOCKING_INDICATOR) + aslc_stat |= asle_set_docking(dev, asle->iuer); + + if (aslc_req & ASLC_ISCT_STATE_CHANGE) + aslc_stat |= asle_isct_state(dev); + + asle->aslc = aslc_stat; } -#define ASLE_ALS_EN (1<<0) -#define ASLE_BLC_EN (1<<1) -#define ASLE_PFIT_EN (1<<2) -#define ASLE_PFMB_EN (1<<3) -void intel_opregion_enable_asle(struct drm_device *dev) +void intel_opregion_asle_intr(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct opregion_asle __iomem *asle = dev_priv->opregion.asle; - if (asle) { - if (IS_MOBILE(dev)) - intel_enable_asle(dev); - - iowrite32(ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | - ASLE_PFMB_EN, - &asle->tche); - iowrite32(1, &asle->ardy); - } + if (dev_priv->opregion.asle) + schedule_work(&dev_priv->opregion.asle_work); } #define ACPI_EV_DISPLAY_SWITCH (1<<0) @@ -303,8 +592,8 @@ Linux, these are handled by the dock, button and video drivers. */ - struct opregion_acpi __iomem *acpi; struct acpi_bus_event *event = data; + struct opregion_acpi *acpi; int ret = NOTIFY_OK; if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0) @@ -315,11 +604,10 @@ acpi = system_opregion->acpi; - if (event->type == 0x80 && - (ioread32(&acpi->cevt) & 1) == 0) + if (event->type == 0x80 && ((acpi->cevt & 1) == 0)) ret = NOTIFY_BAD; - iowrite32(0, &acpi->csts); + acpi->csts = 0; return ret; } @@ -334,6 +622,38 @@ * (version 3) */ +static u32 get_did(struct intel_opregion *opregion, int i) +{ + u32 did; + + if (i < ARRAY_SIZE(opregion->acpi->didl)) { + did = opregion->acpi->didl[i]; + } else { + i -= ARRAY_SIZE(opregion->acpi->didl); + + if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2))) + return 0; + + did = opregion->acpi->did2[i]; + } + + return did; +} + +static void set_did(struct intel_opregion *opregion, int i, u32 val) +{ + if (i < ARRAY_SIZE(opregion->acpi->didl)) { + opregion->acpi->didl[i] = val; + } else { + i -= ARRAY_SIZE(opregion->acpi->didl); + + if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2))) + return; + + opregion->acpi->did2[i] = val; + } +} + static void intel_didl_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -343,10 +663,10 @@ struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL; unsigned long long device_id; acpi_status status; - u32 temp; + u32 temp, max_outputs; int i = 0; - handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev); + handle = ACPI_HANDLE(&dev->pdev->dev); if (!handle || acpi_bus_get_device(handle, &acpi_dev)) return; @@ -362,41 +682,50 @@ } if (!acpi_video_bus) { - pr_warn("No ACPI video bus found\n"); + DRM_DEBUG_KMS("No ACPI video bus found\n"); return; } + /* + * In theory, did2, the extended didl, gets added at opregion version + * 3.0. In practice, however, we're supposed to set it for earlier + * versions as well, since a BIOS that doesn't understand did2 should + * not look at it anyway. Use a variable so we can tweak this if a need + * arises later. + */ + max_outputs = ARRAY_SIZE(opregion->acpi->didl) + + ARRAY_SIZE(opregion->acpi->did2); + list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) { - if (i >= 8) { - dev_printk(KERN_ERR, &dev->pdev->dev, - "More than 8 outputs detected\n"); + if (i >= max_outputs) { + DRM_DEBUG_KMS("More than %u outputs detected via ACPI\n", + max_outputs); return; } - status = - acpi_evaluate_integer(acpi_cdev->handle, "_ADR", - NULL, &device_id); + status = acpi_evaluate_integer(acpi_cdev->handle, "_ADR", + NULL, &device_id); if (ACPI_SUCCESS(status)) { if (!device_id) goto blind_set; - iowrite32((u32)(device_id & 0x0f0f), - &opregion->acpi->didl[i]); - i++; + set_did(opregion, i++, (u32)(device_id & 0x0f0f)); } } end: - /* If fewer than 8 outputs, the list must be null terminated */ - if (i < 8) - iowrite32(0, &opregion->acpi->didl[i]); + DRM_DEBUG_KMS("%d outputs detected\n", i); + + /* If fewer than max outputs, the list must be null terminated */ + if (i < max_outputs) + set_did(opregion, i, 0); return; blind_set: i = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { int output_type = ACPI_OTHER_OUTPUT; - if (i >= 8) { - dev_printk(KERN_ERR, &dev->pdev->dev, - "More than 8 outputs detected\n"); + if (i >= max_outputs) { + DRM_DEBUG_KMS("More than %u outputs in connector list\n", + max_outputs); return; } switch (connector->connector_type) { @@ -421,9 +750,8 @@ output_type = ACPI_LVDS_OUTPUT; break; } - temp = ioread32(&opregion->acpi->didl[i]); - iowrite32(temp | (1<<31) | output_type | i, - &opregion->acpi->didl[i]); + temp = get_did(opregion, i); + set_did(opregion, i, temp | (1 << 31) | output_type | i); i++; } goto end; @@ -443,8 +771,8 @@ * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if * there are less than eight devices. */ do { - disp_id = ioread32(&opregion->acpi->didl[i]); - iowrite32(disp_id, &opregion->acpi->cadl[i]); + disp_id = get_did(opregion, i); + opregion->acpi->cadl[i] = disp_id; } while (++i < 8 && disp_id != 0); } @@ -457,23 +785,23 @@ return; if (opregion->acpi) { - if (drm_core_check_feature(dev, DRIVER_MODESET)) { - intel_didl_outputs(dev); - intel_setup_cadls(dev); - } + intel_didl_outputs(dev); + intel_setup_cadls(dev); /* Notify BIOS we are ready to handle ACPI video ext notifs. * Right now, all the events are handled by the ACPI video module. * We don't actually need to do anything with them. */ - iowrite32(0, &opregion->acpi->csts); - iowrite32(1, &opregion->acpi->drdy); + opregion->acpi->csts = 0; + opregion->acpi->drdy = 1; system_opregion = opregion; register_acpi_notifier(&intel_opregion_notifier); } - if (opregion->asle) - intel_opregion_enable_asle(dev); + if (opregion->asle) { + opregion->asle->tche = ASLE_TCHE_BLC_EN; + opregion->asle->ardy = ASLE_ARDY_READY; + } } void intel_opregion_fini(struct drm_device *dev) @@ -484,31 +812,101 @@ if (!opregion->header) return; + if (opregion->asle) + opregion->asle->ardy = ASLE_ARDY_NOT_READY; + + cancel_work_sync(&dev_priv->opregion.asle_work); + if (opregion->acpi) { - iowrite32(0, &opregion->acpi->drdy); + opregion->acpi->drdy = 0; system_opregion = NULL; unregister_acpi_notifier(&intel_opregion_notifier); } /* just clear all opregion memory pointers now */ - iounmap(opregion->header); + memunmap(opregion->header); opregion->header = NULL; opregion->acpi = NULL; opregion->swsci = NULL; opregion->asle = NULL; opregion->vbt = NULL; + opregion->lid_state = NULL; } -#endif + +static void swsci_setup(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_opregion *opregion = &dev_priv->opregion; + bool requested_callbacks = false; + u32 tmp; + + /* Sub-function code 0 is okay, let's allow them. */ + opregion->swsci_gbda_sub_functions = 1; + opregion->swsci_sbcb_sub_functions = 1; + + /* We use GBDA to ask for supported GBDA calls. */ + if (swsci(dev, SWSCI_GBDA_SUPPORTED_CALLS, 0, &tmp) == 0) { + /* make the bits match the sub-function codes */ + tmp <<= 1; + opregion->swsci_gbda_sub_functions |= tmp; + } + + /* + * We also use GBDA to ask for _requested_ SBCB callbacks. The driver + * must not call interfaces that are not specifically requested by the + * bios. + */ + if (swsci(dev, SWSCI_GBDA_REQUESTED_CALLBACKS, 0, &tmp) == 0) { + /* here, the bits already match sub-function codes */ + opregion->swsci_sbcb_sub_functions |= tmp; + requested_callbacks = true; + } + + /* + * But we use SBCB to ask for _supported_ SBCB calls. This does not mean + * the callback is _requested_. But we still can't call interfaces that + * are not requested. + */ + if (swsci(dev, SWSCI_SBCB_SUPPORTED_CALLBACKS, 0, &tmp) == 0) { + /* make the bits match the sub-function codes */ + u32 low = tmp & 0x7ff; + u32 high = tmp & ~0xfff; /* bit 11 is reserved */ + tmp = (high << 4) | (low << 1) | 1; + + /* best guess what to do with supported wrt requested */ + if (requested_callbacks) { + u32 req = opregion->swsci_sbcb_sub_functions; + if ((req & tmp) != req) + DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req, tmp); + /* XXX: for now, trust the requested callbacks */ + /* opregion->swsci_sbcb_sub_functions &= tmp; */ + } else { + opregion->swsci_sbcb_sub_functions |= tmp; + } + } + + DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n", + opregion->swsci_gbda_sub_functions, + opregion->swsci_sbcb_sub_functions); +} +#else /* CONFIG_ACPI */ +static inline void swsci_setup(struct drm_device *dev) {} +#endif /* CONFIG_ACPI */ int intel_opregion_setup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_opregion *opregion = &dev_priv->opregion; - void __iomem *base; u32 asls, mboxes; char buf[sizeof(OPREGION_SIGNATURE)]; int err = 0; + void *base; + + BUILD_BUG_ON(sizeof(struct opregion_header) != 0x100); + BUILD_BUG_ON(sizeof(struct opregion_acpi) != 0x100); + BUILD_BUG_ON(sizeof(struct opregion_swsci) != 0x100); + BUILD_BUG_ON(sizeof(struct opregion_asle) != 0x100); pci_read_config_dword(dev->pdev, PCI_ASLS, &asls); DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls); @@ -517,11 +915,15 @@ return -ENOTSUPP; } - base = acpi_os_ioremap(asls, OPREGION_SIZE); +#ifdef CONFIG_ACPI + INIT_WORK(&opregion->asle_work, asle_work); +#endif + + base = memremap(asls, OPREGION_SIZE, MEMREMAP_WB); if (!base) return -ENOMEM; - memcpy_fromio(buf, base, sizeof(buf)); + memcpy(buf, base, sizeof(buf)); if (memcmp(buf, OPREGION_SIGNATURE, 16)) { DRM_DEBUG_DRIVER("opregion signature mismatch\n"); @@ -533,7 +935,7 @@ opregion->lid_state = base + ACPI_CLID; - mboxes = ioread32(&opregion->header->mboxes); + mboxes = opregion->header->mboxes; if (mboxes & MBOX_ACPI) { DRM_DEBUG_DRIVER("Public ACPI methods supported\n"); opregion->acpi = base + OPREGION_ACPI_OFFSET; @@ -542,15 +944,18 @@ if (mboxes & MBOX_SWSCI) { DRM_DEBUG_DRIVER("SWSCI supported\n"); opregion->swsci = base + OPREGION_SWSCI_OFFSET; + swsci_setup(dev); } if (mboxes & MBOX_ASLE) { DRM_DEBUG_DRIVER("ASLE supported\n"); opregion->asle = base + OPREGION_ASLE_OFFSET; + + opregion->asle->ardy = ASLE_ARDY_NOT_READY; } return 0; err_out: - iounmap(base); + memunmap(base); return err; }