--- zzzz-none-000/linux-3.10.107/drivers/hwmon/adm1029.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/hwmon/adm1029.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,9 +1,9 @@ /* * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring * - * Copyright (C) 2006 Corentin LABBE + * Copyright (C) 2006 Corentin LABBE * - * Based on LM83 Driver by Jean Delvare + * Based on LM83 Driver by Jean Delvare * * Give only processor, motherboard temperatures and fan tachs * Very rare chip please let me know if you use it @@ -106,45 +106,11 @@ }; /* - * Functions declaration - */ - -static int adm1029_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int adm1029_detect(struct i2c_client *client, - struct i2c_board_info *info); -static int adm1029_remove(struct i2c_client *client); -static struct adm1029_data *adm1029_update_device(struct device *dev); -static int adm1029_init_client(struct i2c_client *client); - -/* - * Driver data (common to all clients) - */ - -static const struct i2c_device_id adm1029_id[] = { - { "adm1029", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, adm1029_id); - -static struct i2c_driver adm1029_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "adm1029", - }, - .probe = adm1029_probe, - .remove = adm1029_remove, - .id_table = adm1029_id, - .detect = adm1029_detect, - .address_list = normal_i2c, -}; - -/* * Client data (each client gets its own) */ struct adm1029_data { - struct device *hwmon_dev; + struct i2c_client *client; struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -156,6 +122,50 @@ }; /* + * function that update the status of the chips (temperature for example) + */ +static struct adm1029_data *adm1029_update_device(struct device *dev) +{ + struct adm1029_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + + mutex_lock(&data->update_lock); + /* + * Use the "cache" Luke, don't recheck values + * if there are already checked not a long time later + */ + if (time_after(jiffies, data->last_updated + HZ * 2) + || !data->valid) { + int nr; + + dev_dbg(&client->dev, "Updating adm1029 data\n"); + + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { + data->temp[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_TEMP[nr]); + } + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { + data->fan[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_FAN[nr]); + } + for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { + data->fan_div[nr] = + i2c_smbus_read_byte_data(client, + ADM1029_REG_FAN_DIV[nr]); + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* * Sysfs stuff */ @@ -197,8 +207,8 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct adm1029_data *data = i2c_get_clientdata(client); + struct adm1029_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); u8 reg; long val; @@ -270,7 +280,7 @@ static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div, set_fan_div, 1); -static struct attribute *adm1029_attributes[] = { +static struct attribute *adm1029_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -289,9 +299,7 @@ NULL }; -static const struct attribute_group adm1029_group = { - .attrs = adm1029_attributes, -}; +ATTRIBUTE_GROUPS(adm1029); /* * Real code @@ -340,48 +348,10 @@ return 0; } -static int adm1029_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct adm1029_data *data; - int err; - - data = devm_kzalloc(&client->dev, sizeof(struct adm1029_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* - * Initialize the ADM1029 chip - * Check config register - */ - if (adm1029_init_client(client) == 0) - return -ENODEV; - - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &adm1029_group); - if (err) - return err; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - - exit_remove_files: - sysfs_remove_group(&client->dev.kobj, &adm1029_group); - return err; -} - static int adm1029_init_client(struct i2c_client *client) { u8 config; + config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); if ((config & 0x10) == 0) { i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, @@ -396,62 +366,52 @@ return 1; } -static int adm1029_remove(struct i2c_client *client) +static int adm1029_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct adm1029_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &adm1029_group); + struct device *dev = &client->dev; + struct adm1029_data *data; + struct device *hwmon_dev; - return 0; -} + data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL); + if (!data) + return -ENOMEM; -/* - * function that update the status of the chips (temperature for example) - */ -static struct adm1029_data *adm1029_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1029_data *data = i2c_get_clientdata(client); + data->client = client; + mutex_init(&data->update_lock); - mutex_lock(&data->update_lock); /* - * Use the "cache" Luke, don't recheck values - * if there are already checked not a long time later + * Initialize the ADM1029 chip + * Check config register */ - if (time_after(jiffies, data->last_updated + HZ * 2) - || !data->valid) { - int nr; - - dev_dbg(&client->dev, "Updating adm1029 data\n"); - - for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { - data->temp[nr] = - i2c_smbus_read_byte_data(client, - ADM1029_REG_TEMP[nr]); - } - for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { - data->fan[nr] = - i2c_smbus_read_byte_data(client, - ADM1029_REG_FAN[nr]); - } - for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { - data->fan_div[nr] = - i2c_smbus_read_byte_data(client, - ADM1029_REG_FAN_DIV[nr]); - } + if (adm1029_init_client(client) == 0) + return -ENODEV; - data->last_updated = jiffies; - data->valid = 1; - } + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + adm1029_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} - mutex_unlock(&data->update_lock); +static const struct i2c_device_id adm1029_id[] = { + { "adm1029", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1029_id); - return data; -} +static struct i2c_driver adm1029_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adm1029", + }, + .probe = adm1029_probe, + .id_table = adm1029_id, + .detect = adm1029_detect, + .address_list = normal_i2c, +}; module_i2c_driver(adm1029_driver); -MODULE_AUTHOR("Corentin LABBE "); +MODULE_AUTHOR("Corentin LABBE "); MODULE_DESCRIPTION("adm1029 driver"); MODULE_LICENSE("GPL v2");