--- zzzz-none-000/linux-3.10.107/drivers/iio/accel/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/iio/accel/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -1,8 +1,45 @@
 #
 # Accelerometer drivers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Accelerometers"
 
+config BMA180
+	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Bosch BMA180 or
+	  BMA250 triaxial acceleration sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bma180.
+
+config BMC150_ACCEL
+	tristate "Bosch BMC150 Accelerometer Driver"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP
+	select BMC150_ACCEL_I2C if I2C
+	select BMC150_ACCEL_SPI if SPI
+	help
+	  Say yes here to build support for the following Bosch accelerometers:
+	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
+
+	  This is a combo module with both accelerometer and magnetometer.
+	  This driver is only implementing accelerometer part, which has
+	  its own address and register map.
+
+config BMC150_ACCEL_I2C
+	tristate
+	select REGMAP_I2C
+
+config BMC150_ACCEL_SPI
+	tristate
+	select REGMAP_SPI
+
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -14,12 +51,8 @@
 	  Say yes here to build support for the HID SENSOR
 	  accelerometers 3D.
 
-config KXSD9
-	tristate "Kionix KXSD9 Accelerometer Driver"
-	depends on SPI
-	help
-	  Say yes here to build support for the Kionix KXSD9 accelerometer.
-	  Currently this only supports the device via an SPI interface.
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-accel-3d.
 
 config IIO_ST_ACCEL_3AXIS
 	tristate "STMicroelectronics accelerometers 3-Axis Driver"
@@ -28,14 +61,13 @@
 	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
 	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
-	select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
 
-	  This driver can also be built as a module. If so, will be created
-	  these modules:
+	  This driver can also be built as a module. If so, these modules
+	  will be created:
 	  - st_accel (core functions for the driver [it is mandatory]);
 	  - st_accel_i2c (necessary for the I2C devices [optional*]);
 	  - st_accel_spi (necessary for the SPI devices [optional*]);
@@ -52,4 +84,101 @@
 	depends on IIO_ST_ACCEL_3AXIS
 	depends on IIO_ST_SENSORS_SPI
 
+config KXSD9
+	tristate "Kionix KXSD9 Accelerometer Driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Kionix KXSD9 accelerometer.
+	  Currently this only supports the device via an SPI interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called kxsd9.
+
+config KXCJK1013
+	tristate "Kionix 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
+	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
+	  and KXTJ2-1009.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxcjk-1013.
+
+config MMA8452
+	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for the following Freescale 3-axis
+	  accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma8452.
+
+config MMA9551_CORE
+	tristate
+
+config MMA9551
+	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
+	depends on I2C
+	select MMA9551_CORE
+
+	help
+	  Say yes here to build support for the Freescale MMA9551L
+	  Intelligent Motion-Sensing Platform Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma9551.
+
+config MMA9553
+	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
+	depends on I2C
+	select MMA9551_CORE
+	help
+	  Say yes here to build support for the Freescale MMA9553L
+	  Intelligent Pedometer Platform Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma9553.
+
+config MXC4005
+	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the Memsic MXC4005XC 3-axis
+	  accelerometer.
+
+	  To compile this driver as a module, choose M. The module will be
+	  called mxc4005.
+
+config STK8312
+	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to get support for the Sensortek STK8312 3-axis
+	  accelerometer.
+
+	  Choosing M will build the driver as a module. If so, the module
+	  will be called stk8312.
+
+config STK8BA50
+	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
+	depends on I2C
+	depends on IIO_TRIGGER
+	help
+	  Say yes here to get support for the Sensortek STK8BA50 3-axis
+	  accelerometer.
+
+	  Choosing M will build the driver as a module. If so, the module
+	  will be called stk8ba50.
+
 endmenu