--- zzzz-none-000/linux-3.10.107/drivers/iio/adc/Kconfig 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/iio/adc/Kconfig 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,8 @@ # # ADC drivers # +# When adding new entries keep the list in alphabetical order + menu "Analog to digital converters" config AD_SIGMA_DELTA @@ -18,6 +20,19 @@ Say yes here to build support for Analog Devices AD7265 and AD7266 ADCs. + To compile this driver as a module, choose M here: the module will be + called ad7266. + +config AD7291 + tristate "Analog Devices AD7291 ADC driver" + depends on I2C + help + Say yes here to build support for Analog Devices AD7291 + 8 Channel ADC with temperature sensor. + + To compile this driver as a module, choose M here: the + module will be called ad7291. + config AD7298 tristate "Analog Devices AD7298 ADC driver" depends on SPI @@ -30,17 +45,18 @@ To compile this driver as a module, choose M here: the module will be called ad7298. -config AD7923 - tristate "Analog Devices AD7923 and similar ADCs driver" +config AD7476 + tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices - AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. + Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, + AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, + AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the - module will be called ad7923. + module will be called ad7476. config AD7791 tristate "Analog Devices AD7791 ADC driver" @@ -48,8 +64,7 @@ select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, - AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say - N (but it is safe to say "Y"). + AD7790 and AD7791 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7791. @@ -61,62 +76,145 @@ help Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, AD7794 and AD7795 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called AD7793. -config AD7476 - tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" +config AD7887 + tristate "Analog Devices AD7887 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, - AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). - - If unsure, say N (but it's safe to say "Y"). + Say yes here to build support for Analog Devices + AD7887 SPI analog to digital converter (ADC). To compile this driver as a module, choose M here: the - module will be called ad7476. + module will be called ad7887. -config AD7887 - tristate "Analog Devices AD7887 ADC driver" +config AD7923 + tristate "Analog Devices AD7923 and similar ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices - AD7887 SPI analog to digital converter (ADC). - If unsure, say N (but it's safe to say "Y"). + AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. To compile this driver as a module, choose M here: the - module will be called ad7887. + module will be called ad7923. + +config AD799X + tristate "Analog Devices AD799x ADC driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices: + ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998 + i2c analog to digital converters (ADC). Provides direct access + via sysfs. + + To compile this driver as a module, choose M here: the module will be + called ad799x. config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 + depends on INPUT select IIO_BUFFER select IIO_TRIGGERED_BUFFER select SYSFS help Say yes here to build support for Atmel AT91 ADC. + To compile this driver as a module, choose M here: the module will be + called at91_adc. + +config AXP288_ADC + tristate "X-Powers AXP288 ADC driver" + depends on MFD_AXP20X + help + Say yes here to have support for X-Powers power management IC (PMIC) ADC + device. Depending on platform configuration, this general purpose ADC can + be used for sampling sensors such as thermal resistors. + + To compile this driver as a module, choose M here: the module will be + called axp288_adc. + +config BERLIN2_ADC + tristate "Marvell Berlin2 ADC driver" + depends on ARCH_BERLIN + help + Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for + temperature measurement. + +config CC10001_ADC + tristate "Cosmic Circuits 10001 ADC driver" + depends on HAS_IOMEM && HAVE_CLK && REGULATOR + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Cosmic Circuits 10001 ADC. + + This driver can also be built as a module. If so, the module will be + called cc10001_adc. + +config DA9150_GPADC + tristate "Dialog DA9150 GPADC driver support" + depends on MFD_DA9150 + help + Say yes here to build support for Dialog DA9150 GPADC. + + This driver can also be built as a module. If chosen, the module name + will be da9150-gpadc. + + To compile this driver as a module, choose M here: the module will be + called berlin2-adc. + config EXYNOS_ADC - bool "Exynos ADC driver support" - depends on OF + tristate "Exynos ADC driver support" + depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) help Core support for the ADC block found in the Samsung EXYNOS series of SoCs for drivers such as the touchscreen and hwmon to use to share this resource. + To compile this driver as a module, choose M here: the module will be + called exynos_adc. + +config HI8435 + tristate "Holt Integrated Circuits HI-8435 threshold detector" + select IIO_TRIGGERED_EVENT + depends on SPI + help + If you say yes here you get support for Holt Integrated Circuits + HI-8435 chip. + + This driver can also be built as a module. If so, the module will be + called hi8435. + config LP8788_ADC - bool "LP8788 ADC driver" + tristate "LP8788 ADC driver" depends on MFD_LP8788 help Say yes here to build support for TI LP8788 ADC. + To compile this driver as a module, choose M here: the module will be + called lp8788_adc. + +config MAX1027 + tristate "Maxim max1027 ADC driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Maxim SPI ADC models + max1027, max1029 and max1031. + + To compile this driver as a module, choose M here: the module will be + called max1027. + config MAX1363 tristate "Maxim max1363 ADC driver" depends on I2C @@ -133,6 +231,89 @@ max11646, max11647) Provides direct access via sysfs and buffered data via the iio dev interface. + To compile this driver as a module, choose M here: the module will be + called max1363. + +config MCP320X + tristate "Microchip Technology MCP3x01/02/04/08" + depends on SPI + help + Say yes here to build support for Microchip Technology's + MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204, + MCP3208 or MCP3301 analog to digital converter. + + This driver can also be built as a module. If so, the module will be + called mcp320x. + +config MCP3422 + tristate "Microchip Technology MCP3422/3/4/6/7/8 driver" + depends on I2C + help + Say yes here to build support for Microchip Technology's + MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428 + analog to digital converters. + + This driver can also be built as a module. If so, the module will be + called mcp3422. + +config MEN_Z188_ADC + tristate "MEN 16z188 ADC IP Core support" + depends on MCB + help + Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB + carrier. + + This driver can also be built as a module. If so, the module will be + called men_z188_adc. + +config NAU7802 + tristate "Nuvoton NAU7802 ADC driver" + depends on I2C + help + Say yes here to build support for Nuvoton NAU7802 ADC. + + To compile this driver as a module, choose M here: the + module will be called nau7802. + +config QCOM_SPMI_IADC + tristate "Qualcomm SPMI PMIC current ADC" + depends on SPMI + select REGMAP_SPMI + help + This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip. + + The driver supports single mode operation to read from one of two + channels (external or internal). Hardware have additional + channels internally used for gain and offset calibration. + + To compile this driver as a module, choose M here: the module will + be called qcom-spmi-iadc. + +config QCOM_SPMI_VADC + tristate "Qualcomm SPMI PMIC voltage ADC" + depends on SPMI + select REGMAP_SPMI + help + This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip. + + The driver supports multiple channels read. The VADC is a 15-bit + sigma-delta ADC. Some of the channels are internally used for + calibration. + + To compile this driver as a module, choose M here: the module will + be called qcom-spmi-vadc. + +config ROCKCHIP_SARADC + tristate "Rockchip SARADC driver" + depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST) + depends on RESET_CONTROLLER + help + Say yes here to build support for the SARADC found in SoCs from + Rockchip. + + To compile this driver as a module, choose M here: the + module will be called rockchip_saradc. + config TI_ADC081C tristate "Texas Instruments ADC081C021/027" depends on I2C @@ -143,13 +324,65 @@ This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC128S052 + tristate "Texas Instruments ADC128S052/ADC122S021" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC128S052 + and ADC122S021 chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc128s052. + config TI_AM335X_ADC - tristate "TI's ADC driver" + tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC + select IIO_BUFFER + select IIO_KFIFO_BUF help Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. + To compile this driver as a module, choose M here: the module will be + called ti_am335x_adc. + +config TWL4030_MADC + tristate "TWL4030 MADC (Monitoring A/D Converter)" + depends on TWL4030_CORE + help + This driver provides support for Triton TWL4030-MADC. The + driver supports both RT and SW conversion methods. + + This driver can also be built as a module. If so, the module will be + called twl4030-madc. + +config TWL6030_GPADC + tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" + depends on TWL4030_CORE + default n + help + Say yes here if you want support for the TWL6030/TWL6032 General + Purpose A/D Converter. This will add support for battery type + detection, battery voltage and temperature measurement, die + temperature measurement, system supply voltage, audio accessory, + USB ID detection. + + This driver can also be built as a module. If so, the module will be + called twl6030-gpadc. + +config VF610_ADC + tristate "Freescale vf610 ADC driver" + depends on OF + depends on HAS_IOMEM + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to support for Vybrid board analog-to-digital converter. + Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX. + + This driver can also be built as a module. If so, the module will be + called vf610_adc. + config VIPERBOARD_ADC tristate "Viperboard ADC support" depends on MFD_VIPERBOARD && USB @@ -157,4 +390,20 @@ Say yes here to access the ADC part of the Nano River Technologies Viperboard. + To compile this driver as a module, choose M here: the module will be + called viperboard_adc. + +config XILINX_XADC + tristate "Xilinx XADC driver" + depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST + depends on HAS_IOMEM + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to have support for the Xilinx XADC. The driver does support + both the ZYNQ interface to the XADC as well as the AXI-XADC interface. + + The driver can also be build as a module. If so, the module will be called + xilinx-xadc. + endmenu