--- zzzz-none-000/linux-3.10.107/drivers/iio/gyro/hid-sensor-gyro-3d.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/iio/gyro/hid-sensor-gyro-3d.c 2021-02-04 17:41:59.000000000 +0000 @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -30,10 +31,6 @@ #include #include "../common/hid-sensors/hid-sensor-trigger.h" -/*Format: HID-SENSOR-usage_id_in_hex*/ -/*Usage ID from spec for Gyro-3D: 0x200076*/ -#define DRIVER_NAME "HID-SENSOR-200076" - enum gyro_3d_channel { CHANNEL_SCAN_INDEX_X, CHANNEL_SCAN_INDEX_Y, @@ -46,6 +43,10 @@ struct hid_sensor_common common_attributes; struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX]; u32 gyro_val[GYRO_3D_CHANNEL_MAX]; + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; }; static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = { @@ -60,6 +61,7 @@ .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ) | @@ -69,6 +71,7 @@ .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ) | @@ -78,6 +81,7 @@ .type = IIO_ANGL_VEL, .modified = 1, .channel2 = IIO_MOD_Z, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ) | @@ -106,44 +110,46 @@ struct gyro_3d_state *gyro_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; *val = 0; *val2 = 0; switch (mask) { case 0: + hid_sensor_power_state(&gyro_state->common_attributes, true); report_id = gyro_state->gyro[chan->scan_index].report_id; address = gyro_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( - gyro_state->common_attributes.hsdev, - HID_USAGE_SENSOR_GYRO_3D, address, - report_id); + gyro_state->common_attributes.hsdev, + HID_USAGE_SENSOR_GYRO_3D, address, + report_id, + SENSOR_HUB_SYNC); else { *val = 0; + hid_sensor_power_state(&gyro_state->common_attributes, + false); return -EINVAL; } + hid_sensor_power_state(&gyro_state->common_attributes, false); ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SCALE: - *val = gyro_state->gyro[CHANNEL_SCAN_INDEX_X].units; - ret_type = IIO_VAL_INT; + *val = gyro_state->scale_pre_decml; + *val2 = gyro_state->scale_post_decml; + ret_type = gyro_state->scale_precision; break; case IIO_CHAN_INFO_OFFSET: - *val = hid_sensor_convert_exponent( - gyro_state->gyro[CHANNEL_SCAN_INDEX_X].unit_expo); + *val = gyro_state->value_offset; ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; @@ -179,25 +185,18 @@ return ret; } -static int gyro_3d_write_raw_get_fmt(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask) -{ - return IIO_VAL_INT_PLUS_MICRO; -} - static const struct iio_info gyro_3d_info = { .driver_module = THIS_MODULE, .read_raw = &gyro_3d_read_raw, .write_raw = &gyro_3d_write_raw, - .write_raw_get_fmt = &gyro_3d_write_raw_get_fmt, }; /* Function to push data to buffer */ -static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len) +static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, + int len) { dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); - iio_push_to_buffers(indio_dev, (u8 *)data); + iio_push_to_buffers(indio_dev, data); } /* Callback handler to send event after all samples are received and captured */ @@ -208,11 +207,10 @@ struct iio_dev *indio_dev = platform_get_drvdata(priv); struct gyro_3d_state *gyro_state = iio_priv(indio_dev); - dev_dbg(&indio_dev->dev, "gyro_3d_proc_event [%d]\n", - gyro_state->common_attributes.data_ready); - if (gyro_state->common_attributes.data_ready) + dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n"); + if (atomic_read(&gyro_state->common_attributes.data_ready)) hid_sensor_push_data(indio_dev, - (u8 *)gyro_state->gyro_val, + gyro_state->gyro_val, sizeof(gyro_state->gyro_val)); return 0; @@ -273,6 +271,22 @@ st->gyro[1].index, st->gyro[1].report_id, st->gyro[2].index, st->gyro[2].report_id); + st->scale_precision = hid_sensor_format_scale( + HID_USAGE_SENSOR_GYRO_3D, + &st->gyro[CHANNEL_SCAN_INDEX_X], + &st->scale_pre_decml, &st->scale_post_decml); + + /* Set Sensitivity field ids, when there is no individual modifier */ + if (st->common_attributes.sensitivity.index < 0) { + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_DATA_ANGL_VELOCITY, + &st->common_attributes.sensitivity); + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", + st->common_attributes.sensitivity.index, + st->common_attributes.sensitivity.report_id); + } return ret; } @@ -284,13 +298,10 @@ struct iio_dev *indio_dev; struct gyro_3d_state *gyro_state; struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; - struct iio_chan_spec *channels; - indio_dev = iio_device_alloc(sizeof(struct gyro_3d_state)); - if (indio_dev == NULL) { - ret = -ENOMEM; - goto error_ret; - } + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state)); + if (!indio_dev) + return -ENOMEM; platform_set_drvdata(pdev, indio_dev); gyro_state = iio_priv(indio_dev); @@ -302,25 +313,24 @@ &gyro_state->common_attributes); if (ret) { dev_err(&pdev->dev, "failed to setup common attributes\n"); - goto error_free_dev; + return ret; } - channels = kmemdup(gyro_3d_channels, sizeof(gyro_3d_channels), - GFP_KERNEL); - if (!channels) { - ret = -ENOMEM; + indio_dev->channels = kmemdup(gyro_3d_channels, + sizeof(gyro_3d_channels), GFP_KERNEL); + if (!indio_dev->channels) { dev_err(&pdev->dev, "failed to duplicate channels\n"); - goto error_free_dev; + return -ENOMEM; } - ret = gyro_3d_parse_report(pdev, hsdev, channels, - HID_USAGE_SENSOR_GYRO_3D, gyro_state); + ret = gyro_3d_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + HID_USAGE_SENSOR_GYRO_3D, gyro_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); goto error_free_dev_mem; } - indio_dev->channels = channels; indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels); indio_dev->dev.parent = &pdev->dev; indio_dev->info = &gyro_3d_info; @@ -333,7 +343,7 @@ dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); goto error_free_dev_mem; } - gyro_state->common_attributes.data_ready = false; + atomic_set(&gyro_state->common_attributes.data_ready, 0); ret = hid_sensor_setup_trigger(indio_dev, name, &gyro_state->common_attributes); if (ret < 0) { @@ -362,14 +372,11 @@ error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: kfree(indio_dev->channels); -error_free_dev: - iio_device_free(indio_dev); -error_ret: return ret; } @@ -378,21 +385,31 @@ { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct gyro_3d_state *gyro_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); - iio_device_free(indio_dev); return 0; } +static const struct platform_device_id hid_gyro_3d_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200076", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids); + static struct platform_driver hid_gyro_3d_platform_driver = { + .id_table = hid_gyro_3d_ids, .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, }, .probe = hid_gyro_3d_probe, .remove = hid_gyro_3d_remove,