--- zzzz-none-000/linux-3.10.107/drivers/input/keyboard/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/input/keyboard/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -71,7 +71,7 @@
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86
+	select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
@@ -151,6 +151,18 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called bf54x-keys.
 
+config KEYBOARD_CLPS711X
+	tristate "CLPS711X Keypad support"
+	depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
+	select INPUT_MATRIXKMAP
+	select INPUT_POLLDEV
+	help
+	  Say Y here to enable the matrix keypad on the Cirrus Logic
+	  CLPS711X CPUs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called clps711x-keypad.
+
 config KEYBOARD_LKKBD
 	tristate "DECstation/VAXstation LK201/LK401 keyboard"
 	select SERIO
@@ -175,7 +187,7 @@
 
 config KEYBOARD_GPIO
 	tristate "GPIO Buttons"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This driver implements support for buttons connected
 	  to GPIO pins of various CPUs (and some other chips).
@@ -224,7 +236,7 @@
 
 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
@@ -241,7 +253,7 @@
 
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select INPUT_MATRIXKMAP
 	help
 	  Enable support for GPIO driven matrix keypad.
@@ -303,7 +315,7 @@
 
 config KEYBOARD_LM8323
 	tristate "LM8323 keypad chip"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	depends on LEDS_CLASS
 	help
 	  If you say yes here you get support for the National Semiconductor
@@ -355,6 +367,7 @@
 
 config KEYBOARD_MAX7359
 	tristate "Maxim MAX7359 Key Switch Controller"
+	select INPUT_MATRIXKMAP
 	depends on I2C
 	help
 	  If you say yes here you get support for the Maxim MAX7359 Key
@@ -388,6 +401,17 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called mpr121_touchkey.
 
+config KEYBOARD_SNVS_PWRKEY
+	tristate "IMX SNVS Power Key Driver"
+	depends on SOC_IMX6SX
+	depends on OF
+	help
+	  This is the snvs powerkey driver for the Freescale i.MX application
+	  processors that are newer than i.MX6 SX.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called snvs_pwrkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
@@ -418,6 +442,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called nmk-ske-keypad.
 
+config KEYBOARD_NSPIRE
+	tristate "TI-NSPIRE built-in keyboard"
+	depends on ARCH_NSPIRE && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the built-in keypad on TI-NSPIRE.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nspire-keypad.
+
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
 	depends on ARCH_TEGRA && OF
@@ -442,6 +476,7 @@
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx || ARCH_MMP
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 
@@ -481,7 +516,7 @@
 	  module will be called samsung-keypad.
 
 config KEYBOARD_GOLDFISH_EVENTS
-	depends on GOLDFISH
+	depends on GOLDFISH || COMPILE_TEST
 	tristate "Generic Input Event device for Goldfish"
 	help
 	  Say Y here to get an input event device for the Goldfish virtual
@@ -501,6 +536,17 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called stowaway.
 
+config KEYBOARD_ST_KEYSCAN
+	tristate "STMicroelectronics keyscan support"
+	depends on ARCH_STI || COMPILE_TEST
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use a keypad attached to the keyscan block
+	  on some STMicroelectronics SoC devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-keyscan.
+
 config KEYBOARD_SUNKBD
 	tristate "Sun Type 4 and Type 5 keyboard"
 	select SERIO
@@ -514,7 +560,7 @@
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  Say Y here if you want to use a keypad attached to the KEYSC block
 	  on SuperH processors such as sh7722 and sh7343.
@@ -525,6 +571,7 @@
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	depends on OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
@@ -533,6 +580,16 @@
 	  To compile this driver as a module, choose M here: the module will be
 	  called stmpe-keypad.
 
+config KEYBOARD_SUN4I_LRADC
+	tristate "Allwinner sun4i low res adc attached tablet keys support"
+	depends on ARCH_SUNXI
+	help
+	  This selects support for the Allwinner low res adc attached tablet
+	  keys found on Allwinner sunxi SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-lradc-keys.
+
 config KEYBOARD_DAVINCI
 	tristate "TI DaVinci Key Scan"
 	depends on ARCH_DAVINCI_DM365
@@ -543,6 +600,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called davinci_keyscan.
 
+config KEYBOARD_IPAQ_MICRO
+	tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y to enable support for the buttons attached to
+	  Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
@@ -555,7 +622,7 @@
 
 config KEYBOARD_OMAP4
 	tristate "TI OMAP4+ keypad support"
-	depends on ARCH_OMAP2PLUS
+	depends on OF || ARCH_OMAP2PLUS
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP4+ keypad.
@@ -584,16 +651,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called tc3589x-keypad.
 
-config KEYBOARD_TNETV107X
-	tristate "TI TNETV107X keypad support"
-	depends on ARCH_DAVINCI_TNETV107X
-	select INPUT_MATRIXKMAP
-	help
-	  Say Y here if you want to use the TNETV107X keypad.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tnetv107x-keypad.
-
 config KEYBOARD_TWL4030
 	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 	depends on TWL4030_CORE
@@ -641,4 +698,25 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
+	depends on OF && I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable the CAP11XX touch sensor driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cap11xx.
+
+config KEYBOARD_BCM
+	tristate "Broadcom keypad driver"
+	depends on OF && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	default ARCH_BCM_CYGNUS
+	help
+	  Say Y here if you want to use Broadcom keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm-keypad.
+
 endif