--- zzzz-none-000/linux-3.10.107/drivers/input/keyboard/pxa27x_keypad.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/input/keyboard/pxa27x_keypad.c	2021-02-04 17:41:59.000000000 +0000
@@ -18,20 +18,17 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 /*
  * Keypad Controller registers
@@ -100,7 +97,7 @@
 #define MAX_KEYPAD_KEYS		(MAX_MATRIX_KEY_NUM + MAX_DIRECT_KEY_NUM)
 
 struct pxa27x_keypad {
-	struct pxa27x_keypad_platform_data *pdata;
+	const struct pxa27x_keypad_platform_data *pdata;
 
 	struct clk *clk;
 	struct input_dev *input_dev;
@@ -111,6 +108,8 @@
 	unsigned short keycodes[MAX_KEYPAD_KEYS];
 	int rotary_rel_code[2];
 
+	unsigned int row_shift;
+
 	/* state row bits of each column scan */
 	uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS];
 	uint32_t direct_key_state;
@@ -118,25 +117,252 @@
 	unsigned int direct_key_mask;
 };
 
-static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
+#ifdef CONFIG_OF
+static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
-	unsigned short keycode;
+	struct device *dev = input_dev->dev.parent;
+	u32 rows, cols;
+	int error;
+
+	error = matrix_keypad_parse_of_params(dev, &rows, &cols);
+	if (error)
+		return error;
+
+	if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) {
+		dev_err(dev, "rows or cols exceeds maximum value\n");
+		return -EINVAL;
+	}
+
+	pdata->matrix_key_rows = rows;
+	pdata->matrix_key_cols = cols;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	const __be16 *prop;
+	unsigned short code;
+	unsigned int proplen, size;
 	int i;
+	int error;
 
-	for (i = 0; i < pdata->matrix_key_map_size; i++) {
-		unsigned int key = pdata->matrix_key_map[i];
-		unsigned int row = KEY_ROW(key);
-		unsigned int col = KEY_COL(key);
-		unsigned int scancode = MATRIX_SCAN_CODE(row, col,
-							 MATRIX_ROW_SHIFT);
+	error = of_property_read_u32(np, "marvell,direct-key-count",
+				     &pdata->direct_key_num);
+	if (error) {
+		/*
+		 * If do not have marvel,direct-key-count defined,
+		 * it means direct key is not supported.
+		 */
+		return error == -EINVAL ? 0 : error;
+	}
 
-		keycode = KEY_VAL(key);
-		keypad->keycodes[scancode] = keycode;
-		__set_bit(keycode, input_dev->keybit);
+	error = of_property_read_u32(np, "marvell,direct-key-mask",
+				     &pdata->direct_key_mask);
+	if (error) {
+		if (error != -EINVAL)
+			return error;
+
+		/*
+		 * If marvell,direct-key-mask is not defined, driver will use
+		 * default value. Default value is set when configure the keypad.
+		 */
+		pdata->direct_key_mask = 0;
+	}
+
+	pdata->direct_key_low_active = of_property_read_bool(np,
+					"marvell,direct-key-low-active");
+
+	prop = of_get_property(np, "marvell,direct-key-map", &proplen);
+	if (!prop)
+		return -EINVAL;
+
+	if (proplen % sizeof(u16))
+		return -EINVAL;
+
+	size = proplen / sizeof(u16);
+
+	/* Only MAX_DIRECT_KEY_NUM is accepted.*/
+	if (size > MAX_DIRECT_KEY_NUM)
+		return -EINVAL;
+
+	for (i = 0; i < size; i++) {
+		code = be16_to_cpup(prop + i);
+		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	return 0;
+}
+
+static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	const __be32 *prop;
+	int i, relkey_ret;
+	unsigned int code, proplen;
+	const char *rotaryname[2] = {
+			"marvell,rotary0", "marvell,rotary1"};
+	const char relkeyname[] = {"marvell,rotary-rel-key"};
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+
+	relkey_ret = of_property_read_u32(np, relkeyname, &code);
+	/* if can read correct rotary key-code, we do not need this. */
+	if (relkey_ret == 0) {
+		unsigned short relcode;
+
+		/* rotary0 taks lower half, rotary1 taks upper half. */
+		relcode = code & 0xffff;
+		pdata->rotary0_rel_code = (code & 0xffff);
+		__set_bit(relcode, input_dev->relbit);
+
+		relcode = code >> 16;
+		pdata->rotary1_rel_code = relcode;
+		__set_bit(relcode, input_dev->relbit);
+	}
+
+	for (i = 0; i < 2; i++) {
+		prop = of_get_property(np, rotaryname[i], &proplen);
+		/*
+		 * If the prop is not set, it means keypad does not need
+		 * initialize the rotaryX.
+		 */
+		if (!prop)
+			continue;
+
+		code = be32_to_cpup(prop);
+		/*
+		 * Not all up/down key code are valid.
+		 * Now we depends on direct-rel-code.
+		 */
+		if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) {
+			return relkey_ret;
+		} else {
+			unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1);
+			unsigned short keycode;
+
+			keycode = code & 0xffff;
+			keypad->keycodes[n] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keycode = code >> 16;
+			keypad->keycodes[n + 1] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			if (i == 0)
+				pdata->rotary0_rel_code = -1;
+			else
+				pdata->rotary1_rel_code = -1;
+		}
+		if (i == 0)
+			pdata->enable_rotary0 = 1;
+		else
+			pdata->enable_rotary1 = 1;
+	}
+
+	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
+	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
+
+	return 0;
+}
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	struct pxa27x_keypad_platform_data *pdata;
+	int error;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate memory for pdata\n");
+		return -ENOMEM;
+	}
+
+	error = pxa27x_keypad_matrix_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse matrix key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_direct_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse direct key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_rotary_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse rotary key\n");
+		return error;
 	}
 
+	error = of_property_read_u32(np, "marvell,debounce-interval",
+				     &pdata->debounce_interval);
+	if (error) {
+		dev_err(dev, "failed to parse debpunce-interval\n");
+		return error;
+	}
+
+	/*
+	 * The keycodes may not only includes matrix key but also the direct
+	 * key or rotary key.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	keypad->pdata = pdata;
+	return 0;
+}
+
+#else
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	dev_info(keypad->input_dev->dev.parent, "missing platform data\n");
+
+	return -EINVAL;
+}
+
+#endif
+
+static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned short keycode;
+	int i;
+	int error;
+
+	error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	/*
+	 * The keycodes may not only include matrix keys but also the direct
+	 * or rotary keys.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	/* For direct keys. */
 	for (i = 0; i < pdata->direct_key_num; i++) {
 		keycode = pdata->direct_key_map[i];
 		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = keycode;
@@ -178,11 +404,13 @@
 	}
 
 	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
 }
 
 static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
 	int row, col, num_keys_pressed = 0;
 	uint32_t new_state[MAX_MATRIX_KEY_COLS];
@@ -236,7 +464,8 @@
 			if ((bits_changed & (1 << row)) == 0)
 				continue;
 
-			code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
 			input_event(input_dev, EV_MSC, MSC_SCAN, code);
 			input_report_key(input_dev, keypad->keycodes[code],
 					 new_state[col] & (1 << row));
@@ -284,7 +513,7 @@
 
 static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	uint32_t kprec;
 
 	/* read and reset to default count value */
@@ -300,7 +529,7 @@
 
 static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
 	unsigned int new_state;
 	uint32_t kpdk, bits_changed;
@@ -340,7 +569,7 @@
 
 static void clear_wakeup_event(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 
 	if (pdata->clear_wakeup_event)
 		(pdata->clear_wakeup_event)();
@@ -364,7 +593,7 @@
 
 static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	unsigned int mask = 0, direct_key_num = 0;
 	unsigned long kpc = 0;
 
@@ -431,7 +660,7 @@
 	clk_disable_unprepare(keypad->clk);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int pxa27x_keypad_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -475,25 +704,25 @@
 
 	return 0;
 }
-
-static const struct dev_pm_ops pxa27x_keypad_pm_ops = {
-	.suspend	= pxa27x_keypad_suspend,
-	.resume		= pxa27x_keypad_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(pxa27x_keypad_pm_ops,
+			 pxa27x_keypad_suspend, pxa27x_keypad_resume);
+
+
 static int pxa27x_keypad_probe(struct platform_device *pdev)
 {
-	struct pxa27x_keypad_platform_data *pdata = pdev->dev.platform_data;
+	const struct pxa27x_keypad_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 	struct pxa27x_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
 	int irq, error;
 
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "no platform data defined\n");
+	/* Driver need build keycode from device tree or pdata */
+	if (!np && !pdata)
 		return -EINVAL;
-	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -507,37 +736,27 @@
 		return -ENXIO;
 	}
 
-	keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!keypad || !input_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		error = -ENOMEM;
-		goto failed_free;
-	}
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	keypad->pdata = pdata;
 	keypad->input_dev = input_dev;
 	keypad->irq = irq;
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto failed_free;
-	}
-
-	keypad->mmio_base = ioremap(res->start, resource_size(res));
-	if (keypad->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENXIO;
-		goto failed_free_mem;
-	}
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
 
-	keypad->clk = clk_get(&pdev->dev, NULL);
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
-		error = PTR_ERR(keypad->clk);
-		goto failed_free_io;
+		return PTR_ERR(keypad->clk);
 	}
 
 	input_dev->name = pdev->name;
@@ -555,81 +774,68 @@
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	pxa27x_keypad_build_keycode(keypad);
+	if (pdata) {
+		error = pxa27x_keypad_build_keycode(keypad);
+	} else {
+		error = pxa27x_keypad_build_keycode_from_dt(keypad);
+		/*
+		 * Data that we get from DT resides in dynamically
+		 * allocated memory so we need to update our pdata
+		 * pointer.
+		 */
+		pdata = keypad->pdata;
+	}
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keycode\n");
+		return error;
+	}
+
+	keypad->row_shift = get_count_order(pdata->matrix_key_cols);
 
 	if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) ||
 	    (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) {
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 	}
 
-	error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
-			    pdev->name, keypad);
+	error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler,
+				 0, pdev->name, keypad);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto failed_put_clk;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
-
-failed_free_irq:
-	free_irq(irq, pdev);
-failed_put_clk:
-	clk_put(keypad->clk);
-failed_free_io:
-	iounmap(keypad->mmio_base);
-failed_free_mem:
-	release_mem_region(res->start, resource_size(res));
-failed_free:
-	input_free_device(input_dev);
-	kfree(keypad);
-	return error;
 }
 
-static int pxa27x_keypad_remove(struct platform_device *pdev)
-{
-	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(keypad->irq, pdev);
-	clk_put(keypad->clk);
-
-	input_unregister_device(keypad->input_dev);
-	iounmap(keypad->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	platform_set_drvdata(pdev, NULL);
-	kfree(keypad);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa27x-keypad");
+#ifdef CONFIG_OF
+static const struct of_device_id pxa27x_keypad_dt_match[] = {
+	{ .compatible = "marvell,pxa27x-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
+#endif
 
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
-	.remove		= pxa27x_keypad_remove,
 	.driver		= {
 		.name	= "pxa27x-keypad",
-		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
+		.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
 		.pm	= &pxa27x_keypad_pm_ops,
-#endif
 	},
 };
 module_platform_driver(pxa27x_keypad_driver);
 
 MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
 MODULE_LICENSE("GPL");
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");