--- zzzz-none-000/linux-3.10.107/drivers/isdn/capi/capiutil.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/isdn/capi/capiutil.c	2021-02-04 17:41:59.000000000 +0000
@@ -22,205 +22,6 @@
 
 /* from CAPI2.0 DDK AVM Berlin GmbH */
 
-#ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
-char *capi_info2str(u16 reason)
-{
-	return "..";
-}
-#else
-char *capi_info2str(u16 reason)
-{
-	switch (reason) {
-
-/*-- informative values (corresponding message was processed) -----*/
-	case 0x0001:
-		return "NCPI not supported by current protocol, NCPI ignored";
-	case 0x0002:
-		return "Flags not supported by current protocol, flags ignored";
-	case 0x0003:
-		return "Alert already sent by another application";
-
-/*-- error information concerning CAPI_REGISTER -----*/
-	case 0x1001:
-		return "Too many applications";
-	case 0x1002:
-		return "Logical block size too small, must be at least 128 Bytes";
-	case 0x1003:
-		return "Buffer exceeds 64 kByte";
-	case 0x1004:
-		return "Message buffer size too small, must be at least 1024 Bytes";
-	case 0x1005:
-		return "Max. number of logical connections not supported";
-	case 0x1006:
-		return "Reserved";
-	case 0x1007:
-		return "The message could not be accepted because of an internal busy condition";
-	case 0x1008:
-		return "OS resource error (no memory ?)";
-	case 0x1009:
-		return "CAPI not installed";
-	case 0x100A:
-		return "Controller does not support external equipment";
-	case 0x100B:
-		return "Controller does only support external equipment";
-
-/*-- error information concerning message exchange functions -----*/
-	case 0x1101:
-		return "Illegal application number";
-	case 0x1102:
-		return "Illegal command or subcommand or message length less than 12 bytes";
-	case 0x1103:
-		return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
-	case 0x1104:
-		return "Queue is empty";
-	case 0x1105:
-		return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
-	case 0x1106:
-		return "Unknown notification parameter";
-	case 0x1107:
-		return "The Message could not be accepted because of an internal busy condition";
-	case 0x1108:
-		return "OS Resource error (no memory ?)";
-	case 0x1109:
-		return "CAPI not installed";
-	case 0x110A:
-		return "Controller does not support external equipment";
-	case 0x110B:
-		return "Controller does only support external equipment";
-
-/*-- error information concerning resource / coding problems -----*/
-	case 0x2001:
-		return "Message not supported in current state";
-	case 0x2002:
-		return "Illegal Controller / PLCI / NCCI";
-	case 0x2003:
-		return "Out of PLCI";
-	case 0x2004:
-		return "Out of NCCI";
-	case 0x2005:
-		return "Out of LISTEN";
-	case 0x2006:
-		return "Out of FAX resources (protocol T.30)";
-	case 0x2007:
-		return "Illegal message parameter coding";
-
-/*-- error information concerning requested services  -----*/
-	case 0x3001:
-		return "B1 protocol not supported";
-	case 0x3002:
-		return "B2 protocol not supported";
-	case 0x3003:
-		return "B3 protocol not supported";
-	case 0x3004:
-		return "B1 protocol parameter not supported";
-	case 0x3005:
-		return "B2 protocol parameter not supported";
-	case 0x3006:
-		return "B3 protocol parameter not supported";
-	case 0x3007:
-		return "B protocol combination not supported";
-	case 0x3008:
-		return "NCPI not supported";
-	case 0x3009:
-		return "CIP Value unknown";
-	case 0x300A:
-		return "Flags not supported (reserved bits)";
-	case 0x300B:
-		return "Facility not supported";
-	case 0x300C:
-		return "Data length not supported by current protocol";
-	case 0x300D:
-		return "Reset procedure not supported by current protocol";
-
-/*-- informations about the clearing of a physical connection -----*/
-	case 0x3301:
-		return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
-	case 0x3302:
-		return "Protocol error layer 2";
-	case 0x3303:
-		return "Protocol error layer 3";
-	case 0x3304:
-		return "Another application got that call";
-/*-- T.30 specific reasons -----*/
-	case 0x3311:
-		return "Connecting not successful (remote station is no FAX G3 machine)";
-	case 0x3312:
-		return "Connecting not successful (training error)";
-	case 0x3313:
-		return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
-	case 0x3314:
-		return "Disconnected during transfer (remote abort)";
-	case 0x3315:
-		return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
-	case 0x3316:
-		return "Disconnected during transfer (local tx data underrun)";
-	case 0x3317:
-		return "Disconnected during transfer (local rx data overflow)";
-	case 0x3318:
-		return "Disconnected during transfer (local abort)";
-	case 0x3319:
-		return "Illegal parameter coding (e.g. SFF coding error)";
-
-/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/
-	case 0x3481: return "Unallocated (unassigned) number";
-	case 0x3482: return "No route to specified transit network";
-	case 0x3483: return "No route to destination";
-	case 0x3486: return "Channel unacceptable";
-	case 0x3487:
-		return "Call awarded and being delivered in an established channel";
-	case 0x3490: return "Normal call clearing";
-	case 0x3491: return "User busy";
-	case 0x3492: return "No user responding";
-	case 0x3493: return "No answer from user (user alerted)";
-	case 0x3495: return "Call rejected";
-	case 0x3496: return "Number changed";
-	case 0x349A: return "Non-selected user clearing";
-	case 0x349B: return "Destination out of order";
-	case 0x349C: return "Invalid number format";
-	case 0x349D: return "Facility rejected";
-	case 0x349E: return "Response to STATUS ENQUIRY";
-	case 0x349F: return "Normal, unspecified";
-	case 0x34A2: return "No circuit / channel available";
-	case 0x34A6: return "Network out of order";
-	case 0x34A9: return "Temporary failure";
-	case 0x34AA: return "Switching equipment congestion";
-	case 0x34AB: return "Access information discarded";
-	case 0x34AC: return "Requested circuit / channel not available";
-	case 0x34AF: return "Resources unavailable, unspecified";
-	case 0x34B1: return "Quality of service unavailable";
-	case 0x34B2: return "Requested facility not subscribed";
-	case 0x34B9: return "Bearer capability not authorized";
-	case 0x34BA: return "Bearer capability not presently available";
-	case 0x34BF: return "Service or option not available, unspecified";
-	case 0x34C1: return "Bearer capability not implemented";
-	case 0x34C2: return "Channel type not implemented";
-	case 0x34C5: return "Requested facility not implemented";
-	case 0x34C6: return "Only restricted digital information bearer capability is available";
-	case 0x34CF: return "Service or option not implemented, unspecified";
-	case 0x34D1: return "Invalid call reference value";
-	case 0x34D2: return "Identified channel does not exist";
-	case 0x34D3: return "A suspended call exists, but this call identity does not";
-	case 0x34D4: return "Call identity in use";
-	case 0x34D5: return "No call suspended";
-	case 0x34D6: return "Call having the requested call identity has been cleared";
-	case 0x34D8: return "Incompatible destination";
-	case 0x34DB: return "Invalid transit network selection";
-	case 0x34DF: return "Invalid message, unspecified";
-	case 0x34E0: return "Mandatory information element is missing";
-	case 0x34E1: return "Message type non-existent or not implemented";
-	case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented";
-	case 0x34E3: return "Information element non-existent or not implemented";
-	case 0x34E4: return "Invalid information element contents";
-	case 0x34E5: return "Message not compatible with call state";
-	case 0x34E6: return "Recovery on timer expiry";
-	case 0x34EF: return "Protocol error, unspecified";
-	case 0x34FF: return "Interworking, unspecified";
-
-	default: return "No additional information";
-	}
-}
-#endif
-
 typedef struct {
 	int typ;
 	size_t off;
@@ -400,18 +201,30 @@
 #define structTRcpyovl(x, y, l) memmove(y, x, l)
 
 /*-------------------------------------------------------*/
-static unsigned command_2_index(unsigned c, unsigned sc)
+static unsigned command_2_index(u8 c, u8 sc)
 {
 	if (c & 0x80)
 		c = 0x9 + (c & 0x0f);
-	else if (c <= 0x0f);
 	else if (c == 0x41)
 		c = 0x9 + 0x1;
-	else if (c == 0xff)
+	if (c > 0x18)
 		c = 0x00;
 	return (sc & 3) * (0x9 + 0x9) + c;
 }
 
+/**
+ * capi_cmd2par() - find parameter string for CAPI 2.0 command/subcommand
+ * @cmd:	command number
+ * @subcmd:	subcommand number
+ *
+ * Return value: static string, NULL if command/subcommand unknown
+ */
+
+static unsigned char *capi_cmd2par(u8 cmd, u8 subcmd)
+{
+	return cpars[command_2_index(cmd, subcmd)];
+}
+
 /*-------------------------------------------------------*/
 #define TYP (cdef[cmsg->par[cmsg->p]].typ)
 #define OFF (((u8 *)cmsg) + cdef[cmsg->par[cmsg->p]].off)
@@ -504,7 +317,9 @@
 	cmsg->m = msg;
 	cmsg->l = 8;
 	cmsg->p = 0;
-	cmsg->par = cpars[command_2_index(cmsg->Command, cmsg->Subcommand)];
+	cmsg->par = capi_cmd2par(cmsg->Command, cmsg->Subcommand);
+	if (!cmsg->par)
+		return 1;	/* invalid command/subcommand */
 
 	pars_2_message(cmsg);
 
@@ -577,7 +392,9 @@
 	cmsg->p = 0;
 	byteTRcpy(cmsg->m + 4, &cmsg->Command);
 	byteTRcpy(cmsg->m + 5, &cmsg->Subcommand);
-	cmsg->par = cpars[command_2_index(cmsg->Command, cmsg->Subcommand)];
+	cmsg->par = capi_cmd2par(cmsg->Command, cmsg->Subcommand);
+	if (!cmsg->par)
+		return 1;	/* invalid command/subcommand */
 
 	message_2_pars(cmsg);
 
@@ -672,12 +489,17 @@
  * @cmd:	command number
  * @subcmd:	subcommand number
  *
- * Return value: static string, NULL if command/subcommand unknown
+ * Return value: static string
  */
 
 char *capi_cmd2str(u8 cmd, u8 subcmd)
 {
-	return mnames[command_2_index(cmd, subcmd)];
+	char *result;
+
+	result = mnames[command_2_index(cmd, subcmd)];
+	if (result == NULL)
+		result = "INVALID_COMMAND";
+	return result;
 }
 
 
@@ -827,6 +649,9 @@
 
 static _cdebbuf *protocol_message_2_pars(_cdebbuf *cdb, _cmsg *cmsg, int level)
 {
+	if (!cmsg->par)
+		return NULL;	/* invalid command/subcommand */
+
 	for (; TYP != _CEND; cmsg->p++) {
 		int slen = 29 + 3 - level;
 		int i;
@@ -961,10 +786,10 @@
 	cmsg->p = 0;
 	byteTRcpy(cmsg->m + 4, &cmsg->Command);
 	byteTRcpy(cmsg->m + 5, &cmsg->Subcommand);
-	cmsg->par = cpars[command_2_index(cmsg->Command, cmsg->Subcommand)];
+	cmsg->par = capi_cmd2par(cmsg->Command, cmsg->Subcommand);
 
 	cdb = bufprint(cdb, "%-26s ID=%03d #0x%04x LEN=%04d\n",
-		       mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
+		       capi_cmd2str(cmsg->Command, cmsg->Subcommand),
 		       ((unsigned short *) msg)[1],
 		       ((unsigned short *) msg)[3],
 		       ((unsigned short *) msg)[0]);
@@ -998,7 +823,7 @@
 	cmsg->l = 8;
 	cmsg->p = 0;
 	cdb = bufprint(cdb, "%s ID=%03d #0x%04x LEN=%04d\n",
-		       mnames[command_2_index(cmsg->Command, cmsg->Subcommand)],
+		       capi_cmd2str(cmsg->Command, cmsg->Subcommand),
 		       ((u16 *) cmsg->m)[1],
 		       ((u16 *) cmsg->m)[3],
 		       ((u16 *) cmsg->m)[0]);
@@ -1073,4 +898,3 @@
 EXPORT_SYMBOL(capi_cmd2str);
 EXPORT_SYMBOL(capi_cmsg2str);
 EXPORT_SYMBOL(capi_message2str);
-EXPORT_SYMBOL(capi_info2str);