--- zzzz-none-000/linux-3.10.107/drivers/media/common/saa7146/saa7146_core.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/media/common/saa7146/saa7146_core.c	2021-02-04 17:41:59.000000000 +0000
@@ -71,7 +71,7 @@
 		if (saa7146_read(dev, MC2) & 2)
 			break;
 		if (err) {
-			pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+			pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
 			       dev->name, __func__);
 			return -ETIMEDOUT;
 		}
@@ -364,6 +364,9 @@
 		goto out;
 	}
 
+	/* create a nice device name */
+	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
+
 	DEB_EE("pci:%p\n", pci);
 
 	err = pci_enable_device(pci);
@@ -411,7 +414,7 @@
 	saa7146_write(dev, MC2, 0xf8000000);
 
 	/* request an interrupt for the saa7146 */
-	err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED | IRQF_DISABLED,
+	err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
 			  dev->name, dev);
 	if (err < 0) {
 		ERR("request_irq() failed\n");
@@ -421,29 +424,23 @@
 	err = -ENOMEM;
 
 	/* get memory for various stuff */
-	dev->d_rps0.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
-						    &dev->d_rps0.dma_handle);
+	dev->d_rps0.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						     &dev->d_rps0.dma_handle);
 	if (!dev->d_rps0.cpu_addr)
 		goto err_free_irq;
-	memset(dev->d_rps0.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
-	dev->d_rps1.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
-						    &dev->d_rps1.dma_handle);
+	dev->d_rps1.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						     &dev->d_rps1.dma_handle);
 	if (!dev->d_rps1.cpu_addr)
 		goto err_free_rps0;
-	memset(dev->d_rps1.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
-	dev->d_i2c.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
-						   &dev->d_i2c.dma_handle);
+	dev->d_i2c.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						    &dev->d_i2c.dma_handle);
 	if (!dev->d_i2c.cpu_addr)
 		goto err_free_rps1;
-	memset(dev->d_i2c.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
 	/* the rest + print status message */
 
-	/* create a nice device name */
-	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
-
 	pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
 		dev->mem, dev->revision, pci->irq,
 		pci->subsystem_vendor, pci->subsystem_device);
@@ -524,8 +521,6 @@
 	DEB_EE("dev:%p\n", dev);
 
 	dev->ext->detach(dev);
-	/* Zero the PCI drvdata after use. */
-	pci_set_drvdata(pdev, NULL);
 
 	/* shut down all video dma transfers */
 	saa7146_write(dev, MC1, 0x00ff0000);