--- zzzz-none-000/linux-3.10.107/drivers/media/i2c/adv7180.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/media/i2c/adv7180.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,8 @@ /* * adv7180.c Analog Devices ADV7180 video decoder driver * Copyright (c) 2009 Intel Corporation + * Copyright (C) 2013 Cogent Embedded, Inc. + * Copyright (C) 2013 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,62 +25,66 @@ #include #include #include +#include #include #include #include #include -#include #include +#include -#define ADV7180_INPUT_CONTROL_REG 0x00 -#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00 -#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10 -#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM 0x20 -#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM 0x30 -#define ADV7180_INPUT_CONTROL_NTSC_J 0x40 -#define ADV7180_INPUT_CONTROL_NTSC_M 0x50 -#define ADV7180_INPUT_CONTROL_PAL60 0x60 -#define ADV7180_INPUT_CONTROL_NTSC_443 0x70 -#define ADV7180_INPUT_CONTROL_PAL_BG 0x80 -#define ADV7180_INPUT_CONTROL_PAL_N 0x90 -#define ADV7180_INPUT_CONTROL_PAL_M 0xa0 -#define ADV7180_INPUT_CONTROL_PAL_M_PED 0xb0 -#define ADV7180_INPUT_CONTROL_PAL_COMB_N 0xc0 -#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED 0xd0 -#define ADV7180_INPUT_CONTROL_PAL_SECAM 0xe0 -#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0 +#define ADV7180_STD_AD_PAL_BG_NTSC_J_SECAM 0x0 +#define ADV7180_STD_AD_PAL_BG_NTSC_J_SECAM_PED 0x1 +#define ADV7180_STD_AD_PAL_N_NTSC_J_SECAM 0x2 +#define ADV7180_STD_AD_PAL_N_NTSC_M_SECAM 0x3 +#define ADV7180_STD_NTSC_J 0x4 +#define ADV7180_STD_NTSC_M 0x5 +#define ADV7180_STD_PAL60 0x6 +#define ADV7180_STD_NTSC_443 0x7 +#define ADV7180_STD_PAL_BG 0x8 +#define ADV7180_STD_PAL_N 0x9 +#define ADV7180_STD_PAL_M 0xa +#define ADV7180_STD_PAL_M_PED 0xb +#define ADV7180_STD_PAL_COMB_N 0xc +#define ADV7180_STD_PAL_COMB_N_PED 0xd +#define ADV7180_STD_PAL_SECAM 0xe +#define ADV7180_STD_PAL_SECAM_PED 0xf + +#define ADV7180_REG_INPUT_CONTROL 0x0000 #define ADV7180_INPUT_CONTROL_INSEL_MASK 0x0f -#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04 +#define ADV7182_REG_INPUT_VIDSEL 0x0002 + +#define ADV7180_REG_EXTENDED_OUTPUT_CONTROL 0x0004 #define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5 -#define ADV7180_AUTODETECT_ENABLE_REG 0x07 +#define ADV7180_REG_AUTODETECT_ENABLE 0x07 #define ADV7180_AUTODETECT_DEFAULT 0x7f /* Contrast */ -#define ADV7180_CON_REG 0x08 /*Unsigned */ +#define ADV7180_REG_CON 0x0008 /*Unsigned */ #define ADV7180_CON_MIN 0 #define ADV7180_CON_DEF 128 #define ADV7180_CON_MAX 255 /* Brightness*/ -#define ADV7180_BRI_REG 0x0a /*Signed */ +#define ADV7180_REG_BRI 0x000a /*Signed */ #define ADV7180_BRI_MIN -128 #define ADV7180_BRI_DEF 0 #define ADV7180_BRI_MAX 127 /* Hue */ -#define ADV7180_HUE_REG 0x0b /*Signed, inverted */ +#define ADV7180_REG_HUE 0x000b /*Signed, inverted */ #define ADV7180_HUE_MIN -127 #define ADV7180_HUE_DEF 0 #define ADV7180_HUE_MAX 128 -#define ADV7180_ADI_CTRL_REG 0x0e -#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20 +#define ADV7180_REG_CTRL 0x000e +#define ADV7180_CTRL_IRQ_SPACE 0x20 -#define ADV7180_PWR_MAN_REG 0x0f +#define ADV7180_REG_PWR_MAN 0x0f #define ADV7180_PWR_MAN_ON 0x04 #define ADV7180_PWR_MAN_OFF 0x24 #define ADV7180_PWR_MAN_RES 0x80 -#define ADV7180_STATUS1_REG 0x10 +#define ADV7180_REG_STATUS1 0x0010 #define ADV7180_STATUS1_IN_LOCK 0x01 #define ADV7180_STATUS1_AUTOD_MASK 0x70 #define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00 @@ -90,49 +96,161 @@ #define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60 #define ADV7180_STATUS1_AUTOD_SECAM_525 0x70 -#define ADV7180_IDENT_REG 0x11 +#define ADV7180_REG_IDENT 0x0011 #define ADV7180_ID_7180 0x18 -#define ADV7180_ICONF1_ADI 0x40 +#define ADV7180_REG_ICONF1 0x0040 #define ADV7180_ICONF1_ACTIVE_LOW 0x01 #define ADV7180_ICONF1_PSYNC_ONLY 0x10 #define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0 /* Saturation */ -#define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */ -#define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */ +#define ADV7180_REG_SD_SAT_CB 0x00e3 /*Unsigned */ +#define ADV7180_REG_SD_SAT_CR 0x00e4 /*Unsigned */ #define ADV7180_SAT_MIN 0 #define ADV7180_SAT_DEF 128 #define ADV7180_SAT_MAX 255 #define ADV7180_IRQ1_LOCK 0x01 #define ADV7180_IRQ1_UNLOCK 0x02 -#define ADV7180_ISR1_ADI 0x42 -#define ADV7180_ICR1_ADI 0x43 -#define ADV7180_IMR1_ADI 0x44 -#define ADV7180_IMR2_ADI 0x48 +#define ADV7180_REG_ISR1 0x0042 +#define ADV7180_REG_ICR1 0x0043 +#define ADV7180_REG_IMR1 0x0044 +#define ADV7180_REG_IMR2 0x0048 #define ADV7180_IRQ3_AD_CHANGE 0x08 -#define ADV7180_ISR3_ADI 0x4A -#define ADV7180_ICR3_ADI 0x4B -#define ADV7180_IMR3_ADI 0x4C -#define ADV7180_IMR4_ADI 0x50 +#define ADV7180_REG_ISR3 0x004A +#define ADV7180_REG_ICR3 0x004B +#define ADV7180_REG_IMR3 0x004C +#define ADV7180_REG_IMR4 0x50 -#define ADV7180_NTSC_V_BIT_END_REG 0xE6 +#define ADV7180_REG_NTSC_V_BIT_END 0x00E6 #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F +#define ADV7180_REG_VPP_SLAVE_ADDR 0xFD +#define ADV7180_REG_CSI_SLAVE_ADDR 0xFE + +#define ADV7180_REG_FLCONTROL 0x40e0 +#define ADV7180_FLCONTROL_FL_ENABLE 0x1 + +#define ADV7180_CSI_REG_PWRDN 0x00 +#define ADV7180_CSI_PWRDN 0x80 + +#define ADV7180_INPUT_CVBS_AIN1 0x00 +#define ADV7180_INPUT_CVBS_AIN2 0x01 +#define ADV7180_INPUT_CVBS_AIN3 0x02 +#define ADV7180_INPUT_CVBS_AIN4 0x03 +#define ADV7180_INPUT_CVBS_AIN5 0x04 +#define ADV7180_INPUT_CVBS_AIN6 0x05 +#define ADV7180_INPUT_SVIDEO_AIN1_AIN2 0x06 +#define ADV7180_INPUT_SVIDEO_AIN3_AIN4 0x07 +#define ADV7180_INPUT_SVIDEO_AIN5_AIN6 0x08 +#define ADV7180_INPUT_YPRPB_AIN1_AIN2_AIN3 0x09 +#define ADV7180_INPUT_YPRPB_AIN4_AIN5_AIN6 0x0a + +#define ADV7182_INPUT_CVBS_AIN1 0x00 +#define ADV7182_INPUT_CVBS_AIN2 0x01 +#define ADV7182_INPUT_CVBS_AIN3 0x02 +#define ADV7182_INPUT_CVBS_AIN4 0x03 +#define ADV7182_INPUT_CVBS_AIN5 0x04 +#define ADV7182_INPUT_CVBS_AIN6 0x05 +#define ADV7182_INPUT_CVBS_AIN7 0x06 +#define ADV7182_INPUT_CVBS_AIN8 0x07 +#define ADV7182_INPUT_SVIDEO_AIN1_AIN2 0x08 +#define ADV7182_INPUT_SVIDEO_AIN3_AIN4 0x09 +#define ADV7182_INPUT_SVIDEO_AIN5_AIN6 0x0a +#define ADV7182_INPUT_SVIDEO_AIN7_AIN8 0x0b +#define ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3 0x0c +#define ADV7182_INPUT_YPRPB_AIN4_AIN5_AIN6 0x0d +#define ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2 0x0e +#define ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4 0x0f +#define ADV7182_INPUT_DIFF_CVBS_AIN5_AIN6 0x10 +#define ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8 0x11 + +#define ADV7180_DEFAULT_CSI_I2C_ADDR 0x44 +#define ADV7180_DEFAULT_VPP_I2C_ADDR 0x42 + +#define V4L2_CID_ADV_FAST_SWITCH (V4L2_CID_USER_ADV7180_BASE + 0x00) + +struct adv7180_state; + +#define ADV7180_FLAG_RESET_POWERED BIT(0) +#define ADV7180_FLAG_V2 BIT(1) +#define ADV7180_FLAG_MIPI_CSI2 BIT(2) +#define ADV7180_FLAG_I2P BIT(3) + +struct adv7180_chip_info { + unsigned int flags; + unsigned int valid_input_mask; + int (*set_std)(struct adv7180_state *st, unsigned int std); + int (*select_input)(struct adv7180_state *st, unsigned int input); + int (*init)(struct adv7180_state *state); +}; + struct adv7180_state { struct v4l2_ctrl_handler ctrl_hdl; struct v4l2_subdev sd; - struct work_struct work; + struct media_pad pad; struct mutex mutex; /* mutual excl. when accessing chip */ int irq; v4l2_std_id curr_norm; bool autodetect; + bool powered; u8 input; + + struct i2c_client *client; + unsigned int register_page; + struct i2c_client *csi_client; + struct i2c_client *vpp_client; + const struct adv7180_chip_info *chip_info; + enum v4l2_field field; }; #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler, \ struct adv7180_state, \ ctrl_hdl)->sd) +static int adv7180_select_page(struct adv7180_state *state, unsigned int page) +{ + if (state->register_page != page) { + i2c_smbus_write_byte_data(state->client, ADV7180_REG_CTRL, + page); + state->register_page = page; + } + + return 0; +} + +static int adv7180_write(struct adv7180_state *state, unsigned int reg, + unsigned int value) +{ + lockdep_assert_held(&state->mutex); + adv7180_select_page(state, reg >> 8); + return i2c_smbus_write_byte_data(state->client, reg & 0xff, value); +} + +static int adv7180_read(struct adv7180_state *state, unsigned int reg) +{ + lockdep_assert_held(&state->mutex); + adv7180_select_page(state, reg >> 8); + return i2c_smbus_read_byte_data(state->client, reg & 0xff); +} + +static int adv7180_csi_write(struct adv7180_state *state, unsigned int reg, + unsigned int value) +{ + return i2c_smbus_write_byte_data(state->csi_client, reg, value); +} + +static int adv7180_set_video_standard(struct adv7180_state *state, + unsigned int std) +{ + return state->chip_info->set_std(state, std); +} + +static int adv7180_vpp_write(struct adv7180_state *state, unsigned int reg, + unsigned int value) +{ + return i2c_smbus_write_byte_data(state->vpp_client, reg, value); +} + static v4l2_std_id adv7180_std_to_v4l2(u8 status1) { /* in case V4L2_IN_ST_NO_SIGNAL */ @@ -164,22 +282,22 @@ static int v4l2_std_to_adv7180(v4l2_std_id std) { if (std == V4L2_STD_PAL_60) - return ADV7180_INPUT_CONTROL_PAL60; + return ADV7180_STD_PAL60; if (std == V4L2_STD_NTSC_443) - return ADV7180_INPUT_CONTROL_NTSC_443; + return ADV7180_STD_NTSC_443; if (std == V4L2_STD_PAL_N) - return ADV7180_INPUT_CONTROL_PAL_N; + return ADV7180_STD_PAL_N; if (std == V4L2_STD_PAL_M) - return ADV7180_INPUT_CONTROL_PAL_M; + return ADV7180_STD_PAL_M; if (std == V4L2_STD_PAL_Nc) - return ADV7180_INPUT_CONTROL_PAL_COMB_N; + return ADV7180_STD_PAL_COMB_N; if (std & V4L2_STD_PAL) - return ADV7180_INPUT_CONTROL_PAL_BG; + return ADV7180_STD_PAL_BG; if (std & V4L2_STD_NTSC) - return ADV7180_INPUT_CONTROL_NTSC_M; + return ADV7180_STD_NTSC_M; if (std & V4L2_STD_SECAM) - return ADV7180_INPUT_CONTROL_PAL_SECAM; + return ADV7180_STD_PAL_SECAM; return -EINVAL; } @@ -192,10 +310,10 @@ return 0; } -static int __adv7180_status(struct i2c_client *client, u32 *status, +static int __adv7180_status(struct adv7180_state *state, u32 *status, v4l2_std_id *std) { - int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG); + int status1 = adv7180_read(state, ADV7180_REG_STATUS1); if (status1 < 0) return status1; @@ -224,7 +342,7 @@ if (!state->autodetect || state->irq > 0) *std = state->curr_norm; else - err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std); + err = __adv7180_status(state, NULL, std); mutex_unlock(&state->mutex); return err; @@ -235,26 +353,19 @@ { struct adv7180_state *state = to_state(sd); int ret = mutex_lock_interruptible(&state->mutex); - struct i2c_client *client = v4l2_get_subdevdata(sd); if (ret) return ret; - /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept - * all inputs and let the card driver take care of validation - */ - if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input) + if (input > 31 || !(BIT(input) & state->chip_info->valid_input_mask)) { + ret = -EINVAL; goto out; + } - ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG); - - if (ret < 0) - goto out; + ret = state->chip_info->select_input(state, input); - ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK; - ret = i2c_smbus_write_byte_data(client, - ADV7180_INPUT_CONTROL_REG, ret | input); - state->input = input; + if (ret == 0) + state->input = input; out: mutex_unlock(&state->mutex); return ret; @@ -267,63 +378,115 @@ if (ret) return ret; - ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL); + ret = __adv7180_status(state, status, NULL); mutex_unlock(&state->mutex); return ret; } -static int adv7180_g_chip_ident(struct v4l2_subdev *sd, - struct v4l2_dbg_chip_ident *chip) +static int adv7180_program_std(struct adv7180_state *state) { - struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; - return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0); + if (state->autodetect) { + ret = adv7180_set_video_standard(state, + ADV7180_STD_AD_PAL_BG_NTSC_J_SECAM); + if (ret < 0) + return ret; + + __adv7180_status(state, NULL, &state->curr_norm); + } else { + ret = v4l2_std_to_adv7180(state->curr_norm); + if (ret < 0) + return ret; + + ret = adv7180_set_video_standard(state, ret); + if (ret < 0) + return ret; + } + + return 0; } static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct adv7180_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); int ret = mutex_lock_interruptible(&state->mutex); + if (ret) return ret; /* all standards -> autodetect */ if (std == V4L2_STD_ALL) { - ret = - i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, - ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM - | state->input); - if (ret < 0) - goto out; - - __adv7180_status(client, NULL, &state->curr_norm); state->autodetect = true; } else { + /* Make sure we can support this std */ ret = v4l2_std_to_adv7180(std); if (ret < 0) goto out; - ret = i2c_smbus_write_byte_data(client, - ADV7180_INPUT_CONTROL_REG, - ret | state->input); - if (ret < 0) - goto out; - state->curr_norm = std; state->autodetect = false; } - ret = 0; + + ret = adv7180_program_std(state); out: mutex_unlock(&state->mutex); return ret; } +static int adv7180_set_power(struct adv7180_state *state, bool on) +{ + u8 val; + int ret; + + if (on) + val = ADV7180_PWR_MAN_ON; + else + val = ADV7180_PWR_MAN_OFF; + + ret = adv7180_write(state, ADV7180_REG_PWR_MAN, val); + if (ret) + return ret; + + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + if (on) { + adv7180_csi_write(state, 0xDE, 0x02); + adv7180_csi_write(state, 0xD2, 0xF7); + adv7180_csi_write(state, 0xD8, 0x65); + adv7180_csi_write(state, 0xE0, 0x09); + adv7180_csi_write(state, 0x2C, 0x00); + if (state->field == V4L2_FIELD_NONE) + adv7180_csi_write(state, 0x1D, 0x80); + adv7180_csi_write(state, 0x00, 0x00); + } else { + adv7180_csi_write(state, 0x00, 0x80); + } + } + + return 0; +} + +static int adv7180_s_power(struct v4l2_subdev *sd, int on) +{ + struct adv7180_state *state = to_state(sd); + int ret; + + ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + + ret = adv7180_set_power(state, on); + if (ret == 0) + state->powered = on; + + mutex_unlock(&state->mutex); + return ret; +} + static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_adv7180_sd(ctrl); struct adv7180_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); int ret = mutex_lock_interruptible(&state->mutex); int val; @@ -332,26 +495,36 @@ val = ctrl->val; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val); + ret = adv7180_write(state, ADV7180_REG_BRI, val); break; case V4L2_CID_HUE: /*Hue is inverted according to HSL chart */ - ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val); + ret = adv7180_write(state, ADV7180_REG_HUE, -val); break; case V4L2_CID_CONTRAST: - ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val); + ret = adv7180_write(state, ADV7180_REG_CON, val); break; case V4L2_CID_SATURATION: /* *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE *Let's not confuse the user, everybody understands saturation */ - ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG, - val); + ret = adv7180_write(state, ADV7180_REG_SD_SAT_CB, val); if (ret < 0) break; - ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG, - val); + ret = adv7180_write(state, ADV7180_REG_SD_SAT_CR, val); + break; + case V4L2_CID_ADV_FAST_SWITCH: + if (ctrl->val) { + /* ADI required write */ + adv7180_write(state, 0x80d9, 0x44); + adv7180_write(state, ADV7180_REG_FLCONTROL, + ADV7180_FLCONTROL_FL_ENABLE); + } else { + /* ADI required write */ + adv7180_write(state, 0x80d9, 0xc4); + adv7180_write(state, ADV7180_REG_FLCONTROL, 0x00); + } break; default: ret = -EINVAL; @@ -365,6 +538,16 @@ .s_ctrl = adv7180_s_ctrl, }; +static const struct v4l2_ctrl_config adv7180_ctrl_fast_switch = { + .ops = &adv7180_ctrl_ops, + .id = V4L2_CID_ADV_FAST_SWITCH, + .name = "Fast Switching", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, +}; + static int adv7180_init_controls(struct adv7180_state *state) { v4l2_ctrl_handler_init(&state->ctrl_hdl, 4); @@ -381,6 +564,8 @@ v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, V4L2_CID_HUE, ADV7180_HUE_MIN, ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF); + v4l2_ctrl_new_custom(&state->ctrl_hdl, &adv7180_ctrl_fast_switch, NULL); + state->sd.ctrl_handler = &state->ctrl_hdl; if (state->ctrl_hdl.error) { int err = state->ctrl_hdl.error; @@ -397,148 +582,580 @@ v4l2_ctrl_handler_free(&state->ctrl_hdl); } +static int adv7180_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index != 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_YUYV8_2X8; + + return 0; +} + +static int adv7180_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7180_state *state = to_state(sd); + + fmt->code = MEDIA_BUS_FMT_YUYV8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + fmt->width = 720; + fmt->height = state->curr_norm & V4L2_STD_525_60 ? 480 : 576; + + return 0; +} + +static int adv7180_set_field_mode(struct adv7180_state *state) +{ + if (!(state->chip_info->flags & ADV7180_FLAG_I2P)) + return 0; + + if (state->field == V4L2_FIELD_NONE) { + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + adv7180_csi_write(state, 0x01, 0x20); + adv7180_csi_write(state, 0x02, 0x28); + adv7180_csi_write(state, 0x03, 0x38); + adv7180_csi_write(state, 0x04, 0x30); + adv7180_csi_write(state, 0x05, 0x30); + adv7180_csi_write(state, 0x06, 0x80); + adv7180_csi_write(state, 0x07, 0x70); + adv7180_csi_write(state, 0x08, 0x50); + } + adv7180_vpp_write(state, 0xa3, 0x00); + adv7180_vpp_write(state, 0x5b, 0x00); + adv7180_vpp_write(state, 0x55, 0x80); + } else { + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + adv7180_csi_write(state, 0x01, 0x18); + adv7180_csi_write(state, 0x02, 0x18); + adv7180_csi_write(state, 0x03, 0x30); + adv7180_csi_write(state, 0x04, 0x20); + adv7180_csi_write(state, 0x05, 0x28); + adv7180_csi_write(state, 0x06, 0x40); + adv7180_csi_write(state, 0x07, 0x58); + adv7180_csi_write(state, 0x08, 0x30); + } + adv7180_vpp_write(state, 0xa3, 0x70); + adv7180_vpp_write(state, 0x5b, 0x80); + adv7180_vpp_write(state, 0x55, 0x00); + } + + return 0; +} + +static int adv7180_get_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct adv7180_state *state = to_state(sd); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + format->format = *v4l2_subdev_get_try_format(sd, cfg, 0); + } else { + adv7180_mbus_fmt(sd, &format->format); + format->format.field = state->field; + } + + return 0; +} + +static int adv7180_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct adv7180_state *state = to_state(sd); + struct v4l2_mbus_framefmt *framefmt; + + switch (format->format.field) { + case V4L2_FIELD_NONE: + if (!(state->chip_info->flags & ADV7180_FLAG_I2P)) + format->format.field = V4L2_FIELD_INTERLACED; + break; + default: + format->format.field = V4L2_FIELD_INTERLACED; + break; + } + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + framefmt = &format->format; + if (state->field != format->format.field) { + state->field = format->format.field; + adv7180_set_power(state, false); + adv7180_set_field_mode(state); + adv7180_set_power(state, true); + } + } else { + framefmt = v4l2_subdev_get_try_format(sd, cfg, 0); + *framefmt = format->format; + } + + return adv7180_mbus_fmt(sd, framefmt); +} + +static int adv7180_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct adv7180_state *state = to_state(sd); + + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + cfg->type = V4L2_MBUS_CSI2; + cfg->flags = V4L2_MBUS_CSI2_1_LANE | + V4L2_MBUS_CSI2_CHANNEL_0 | + V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; + } else { + /* + * The ADV7180 sensor supports BT.601/656 output modes. + * The BT.656 is default and not yet configurable by s/w. + */ + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_BT656; + } + + return 0; +} + static const struct v4l2_subdev_video_ops adv7180_video_ops = { + .s_std = adv7180_s_std, .querystd = adv7180_querystd, .g_input_status = adv7180_g_input_status, .s_routing = adv7180_s_routing, + .g_mbus_config = adv7180_g_mbus_config, }; + static const struct v4l2_subdev_core_ops adv7180_core_ops = { - .g_chip_ident = adv7180_g_chip_ident, - .s_std = adv7180_s_std, + .s_power = adv7180_s_power, +}; + +static const struct v4l2_subdev_pad_ops adv7180_pad_ops = { + .enum_mbus_code = adv7180_enum_mbus_code, + .set_fmt = adv7180_set_pad_format, + .get_fmt = adv7180_get_pad_format, }; static const struct v4l2_subdev_ops adv7180_ops = { .core = &adv7180_core_ops, .video = &adv7180_video_ops, + .pad = &adv7180_pad_ops, }; -static void adv7180_work(struct work_struct *work) +static irqreturn_t adv7180_irq(int irq, void *devid) { - struct adv7180_state *state = container_of(work, struct adv7180_state, - work); - struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + struct adv7180_state *state = devid; u8 isr3; mutex_lock(&state->mutex); - i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, - ADV7180_ADI_CTRL_IRQ_SPACE); - isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI); + isr3 = adv7180_read(state, ADV7180_REG_ISR3); /* clear */ - i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3); - i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0); + adv7180_write(state, ADV7180_REG_ICR3, isr3); if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect) - __adv7180_status(client, NULL, &state->curr_norm); + __adv7180_status(state, NULL, &state->curr_norm); mutex_unlock(&state->mutex); - enable_irq(state->irq); + return IRQ_HANDLED; } -static irqreturn_t adv7180_irq(int irq, void *devid) +static int adv7180_init(struct adv7180_state *state) { - struct adv7180_state *state = devid; + int ret; - schedule_work(&state->work); + /* ITU-R BT.656-4 compatible */ + ret = adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, + ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS); + if (ret < 0) + return ret; - disable_irq_nosync(state->irq); + /* Manually set V bit end position in NTSC mode */ + return adv7180_write(state, ADV7180_REG_NTSC_V_BIT_END, + ADV7180_NTSC_V_BIT_END_MANUAL_NVEND); +} - return IRQ_HANDLED; +static int adv7180_set_std(struct adv7180_state *state, unsigned int std) +{ + return adv7180_write(state, ADV7180_REG_INPUT_CONTROL, + (std << 4) | state->input); } -static int init_device(struct i2c_client *client, struct adv7180_state *state) +static int adv7180_select_input(struct adv7180_state *state, unsigned int input) { int ret; - /* Initialize adv7180 */ - /* Enable autodetection */ - if (state->autodetect) { - ret = - i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, - ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM - | state->input); - if (ret < 0) - return ret; + ret = adv7180_read(state, ADV7180_REG_INPUT_CONTROL); + if (ret < 0) + return ret; - ret = - i2c_smbus_write_byte_data(client, - ADV7180_AUTODETECT_ENABLE_REG, - ADV7180_AUTODETECT_DEFAULT); - if (ret < 0) - return ret; + ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK; + ret |= input; + return adv7180_write(state, ADV7180_REG_INPUT_CONTROL, ret); +} + +static int adv7182_init(struct adv7180_state *state) +{ + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) + adv7180_write(state, ADV7180_REG_CSI_SLAVE_ADDR, + ADV7180_DEFAULT_CSI_I2C_ADDR << 1); + + if (state->chip_info->flags & ADV7180_FLAG_I2P) + adv7180_write(state, ADV7180_REG_VPP_SLAVE_ADDR, + ADV7180_DEFAULT_VPP_I2C_ADDR << 1); + + if (state->chip_info->flags & ADV7180_FLAG_V2) { + /* ADI recommended writes for improved video quality */ + adv7180_write(state, 0x0080, 0x51); + adv7180_write(state, 0x0081, 0x51); + adv7180_write(state, 0x0082, 0x68); + } + + /* ADI required writes */ + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + adv7180_write(state, 0x0003, 0x4e); + adv7180_write(state, 0x0004, 0x57); + adv7180_write(state, 0x001d, 0xc0); } else { - ret = v4l2_std_to_adv7180(state->curr_norm); - if (ret < 0) - return ret; + if (state->chip_info->flags & ADV7180_FLAG_V2) + adv7180_write(state, 0x0004, 0x17); + else + adv7180_write(state, 0x0004, 0x07); + adv7180_write(state, 0x0003, 0x0c); + adv7180_write(state, 0x001d, 0x40); + } - ret = - i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, - ret | state->input); - if (ret < 0) - return ret; + adv7180_write(state, 0x0013, 0x00); + return 0; +} + +static int adv7182_set_std(struct adv7180_state *state, unsigned int std) +{ + return adv7180_write(state, ADV7182_REG_INPUT_VIDSEL, std << 4); +} + +enum adv7182_input_type { + ADV7182_INPUT_TYPE_CVBS, + ADV7182_INPUT_TYPE_DIFF_CVBS, + ADV7182_INPUT_TYPE_SVIDEO, + ADV7182_INPUT_TYPE_YPBPR, +}; + +static enum adv7182_input_type adv7182_get_input_type(unsigned int input) +{ + switch (input) { + case ADV7182_INPUT_CVBS_AIN1: + case ADV7182_INPUT_CVBS_AIN2: + case ADV7182_INPUT_CVBS_AIN3: + case ADV7182_INPUT_CVBS_AIN4: + case ADV7182_INPUT_CVBS_AIN5: + case ADV7182_INPUT_CVBS_AIN6: + case ADV7182_INPUT_CVBS_AIN7: + case ADV7182_INPUT_CVBS_AIN8: + return ADV7182_INPUT_TYPE_CVBS; + case ADV7182_INPUT_SVIDEO_AIN1_AIN2: + case ADV7182_INPUT_SVIDEO_AIN3_AIN4: + case ADV7182_INPUT_SVIDEO_AIN5_AIN6: + case ADV7182_INPUT_SVIDEO_AIN7_AIN8: + return ADV7182_INPUT_TYPE_SVIDEO; + case ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3: + case ADV7182_INPUT_YPRPB_AIN4_AIN5_AIN6: + return ADV7182_INPUT_TYPE_YPBPR; + case ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2: + case ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4: + case ADV7182_INPUT_DIFF_CVBS_AIN5_AIN6: + case ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8: + return ADV7182_INPUT_TYPE_DIFF_CVBS; + default: /* Will never happen */ + return 0; } - /* ITU-R BT.656-4 compatible */ - ret = i2c_smbus_write_byte_data(client, - ADV7180_EXTENDED_OUTPUT_CONTROL_REG, - ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS); - if (ret < 0) - return ret; +} - /* Manually set V bit end position in NTSC mode */ - ret = i2c_smbus_write_byte_data(client, - ADV7180_NTSC_V_BIT_END_REG, - ADV7180_NTSC_V_BIT_END_MANUAL_NVEND); - if (ret < 0) +/* ADI recommended writes to registers 0x52, 0x53, 0x54 */ +static unsigned int adv7182_lbias_settings[][3] = { + [ADV7182_INPUT_TYPE_CVBS] = { 0xCB, 0x4E, 0x80 }, + [ADV7182_INPUT_TYPE_DIFF_CVBS] = { 0xC0, 0x4E, 0x80 }, + [ADV7182_INPUT_TYPE_SVIDEO] = { 0x0B, 0xCE, 0x80 }, + [ADV7182_INPUT_TYPE_YPBPR] = { 0x0B, 0x4E, 0xC0 }, +}; + +static unsigned int adv7280_lbias_settings[][3] = { + [ADV7182_INPUT_TYPE_CVBS] = { 0xCD, 0x4E, 0x80 }, + [ADV7182_INPUT_TYPE_DIFF_CVBS] = { 0xC0, 0x4E, 0x80 }, + [ADV7182_INPUT_TYPE_SVIDEO] = { 0x0B, 0xCE, 0x80 }, + [ADV7182_INPUT_TYPE_YPBPR] = { 0x0B, 0x4E, 0xC0 }, +}; + +static int adv7182_select_input(struct adv7180_state *state, unsigned int input) +{ + enum adv7182_input_type input_type; + unsigned int *lbias; + unsigned int i; + int ret; + + ret = adv7180_write(state, ADV7180_REG_INPUT_CONTROL, input); + if (ret) return ret; - /* read current norm */ - __adv7180_status(client, NULL, &state->curr_norm); + /* Reset clamp circuitry - ADI recommended writes */ + adv7180_write(state, 0x809c, 0x00); + adv7180_write(state, 0x809c, 0xff); + + input_type = adv7182_get_input_type(input); + + switch (input_type) { + case ADV7182_INPUT_TYPE_CVBS: + case ADV7182_INPUT_TYPE_DIFF_CVBS: + /* ADI recommends to use the SH1 filter */ + adv7180_write(state, 0x0017, 0x41); + break; + default: + adv7180_write(state, 0x0017, 0x01); + break; + } - /* register for interrupts */ - if (state->irq > 0) { - ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME, - state); - if (ret) - return ret; + if (state->chip_info->flags & ADV7180_FLAG_V2) + lbias = adv7280_lbias_settings[input_type]; + else + lbias = adv7182_lbias_settings[input_type]; - ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, - ADV7180_ADI_CTRL_IRQ_SPACE); - if (ret < 0) - return ret; + for (i = 0; i < ARRAY_SIZE(adv7182_lbias_settings[0]); i++) + adv7180_write(state, 0x0052 + i, lbias[i]); + + if (input_type == ADV7182_INPUT_TYPE_DIFF_CVBS) { + /* ADI required writes to make differential CVBS work */ + adv7180_write(state, 0x005f, 0xa8); + adv7180_write(state, 0x005a, 0x90); + adv7180_write(state, 0x0060, 0xb0); + adv7180_write(state, 0x80b6, 0x08); + adv7180_write(state, 0x80c0, 0xa0); + } else { + adv7180_write(state, 0x005f, 0xf0); + adv7180_write(state, 0x005a, 0xd0); + adv7180_write(state, 0x0060, 0x10); + adv7180_write(state, 0x80b6, 0x9c); + adv7180_write(state, 0x80c0, 0x00); + } + + return 0; +} + +static const struct adv7180_chip_info adv7180_info = { + .flags = ADV7180_FLAG_RESET_POWERED, + /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept + * all inputs and let the card driver take care of validation + */ + .valid_input_mask = BIT(ADV7180_INPUT_CVBS_AIN1) | + BIT(ADV7180_INPUT_CVBS_AIN2) | + BIT(ADV7180_INPUT_CVBS_AIN3) | + BIT(ADV7180_INPUT_CVBS_AIN4) | + BIT(ADV7180_INPUT_CVBS_AIN5) | + BIT(ADV7180_INPUT_CVBS_AIN6) | + BIT(ADV7180_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7180_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7180_INPUT_SVIDEO_AIN5_AIN6) | + BIT(ADV7180_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7180_INPUT_YPRPB_AIN4_AIN5_AIN6), + .init = adv7180_init, + .set_std = adv7180_set_std, + .select_input = adv7180_select_input, +}; + +static const struct adv7180_chip_info adv7182_info = { + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; +static const struct adv7180_chip_info adv7280_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_I2P, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7280_m_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_MIPI_CSI2 | ADV7180_FLAG_I2P, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_CVBS_AIN5) | + BIT(ADV7182_INPUT_CVBS_AIN6) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN5_AIN6) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7182_INPUT_YPRPB_AIN4_AIN5_AIN6), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7281_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_MIPI_CSI2, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7281_m_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_MIPI_CSI2, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7281_ma_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_MIPI_CSI2, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_CVBS_AIN5) | + BIT(ADV7182_INPUT_CVBS_AIN6) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN5_AIN6) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7182_INPUT_YPRPB_AIN4_AIN5_AIN6) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN5_AIN6) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7282_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_I2P, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static const struct adv7180_chip_info adv7282_m_info = { + .flags = ADV7180_FLAG_V2 | ADV7180_FLAG_MIPI_CSI2 | ADV7180_FLAG_I2P, + .valid_input_mask = BIT(ADV7182_INPUT_CVBS_AIN1) | + BIT(ADV7182_INPUT_CVBS_AIN2) | + BIT(ADV7182_INPUT_CVBS_AIN3) | + BIT(ADV7182_INPUT_CVBS_AIN4) | + BIT(ADV7182_INPUT_CVBS_AIN7) | + BIT(ADV7182_INPUT_CVBS_AIN8) | + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), + .init = adv7182_init, + .set_std = adv7182_set_std, + .select_input = adv7182_select_input, +}; + +static int init_device(struct adv7180_state *state) +{ + int ret; + + mutex_lock(&state->mutex); + + adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES); + usleep_range(2000, 10000); + + ret = state->chip_info->init(state); + if (ret) + goto out_unlock; + + ret = adv7180_program_std(state); + if (ret) + goto out_unlock; + + adv7180_set_field_mode(state); + + /* register for interrupts */ + if (state->irq > 0) { /* config the Interrupt pin to be active low */ - ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI, + ret = adv7180_write(state, ADV7180_REG_ICONF1, ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY); if (ret < 0) - return ret; + goto out_unlock; - ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0); + ret = adv7180_write(state, ADV7180_REG_IMR1, 0); if (ret < 0) - return ret; + goto out_unlock; - ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0); + ret = adv7180_write(state, ADV7180_REG_IMR2, 0); if (ret < 0) - return ret; + goto out_unlock; /* enable AD change interrupts interrupts */ - ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI, + ret = adv7180_write(state, ADV7180_REG_IMR3, ADV7180_IRQ3_AD_CHANGE); if (ret < 0) - return ret; + goto out_unlock; - ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0); + ret = adv7180_write(state, ADV7180_REG_IMR4, 0); if (ret < 0) - return ret; - - ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, - 0); - if (ret < 0) - return ret; + goto out_unlock; } - return 0; +out_unlock: + mutex_unlock(&state->mutex); + + return ret; } static int adv7180_probe(struct i2c_client *client, @@ -555,36 +1172,84 @@ v4l_info(client, "chip found @ 0x%02x (%s)\n", client->addr, client->adapter->name); - state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL); - if (state == NULL) { - ret = -ENOMEM; - goto err; + state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + state->client = client; + state->field = V4L2_FIELD_INTERLACED; + state->chip_info = (struct adv7180_chip_info *)id->driver_data; + + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) { + state->csi_client = i2c_new_dummy(client->adapter, + ADV7180_DEFAULT_CSI_I2C_ADDR); + if (!state->csi_client) + return -ENOMEM; + } + + if (state->chip_info->flags & ADV7180_FLAG_I2P) { + state->vpp_client = i2c_new_dummy(client->adapter, + ADV7180_DEFAULT_VPP_I2C_ADDR); + if (!state->vpp_client) { + ret = -ENOMEM; + goto err_unregister_csi_client; + } } state->irq = client->irq; - INIT_WORK(&state->work, adv7180_work); mutex_init(&state->mutex); state->autodetect = true; + if (state->chip_info->flags & ADV7180_FLAG_RESET_POWERED) + state->powered = true; + else + state->powered = false; state->input = 0; sd = &state->sd; v4l2_i2c_subdev_init(sd, client, &adv7180_ops); + sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE; ret = adv7180_init_controls(state); if (ret) - goto err_unreg_subdev; - ret = init_device(client, state); + goto err_unregister_vpp_client; + + state->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; + ret = media_entity_init(&sd->entity, 1, &state->pad, 0); if (ret) goto err_free_ctrl; + + ret = init_device(state); + if (ret) + goto err_media_entity_cleanup; + + if (state->irq) { + ret = request_threaded_irq(client->irq, NULL, adv7180_irq, + IRQF_ONESHOT | IRQF_TRIGGER_FALLING, + KBUILD_MODNAME, state); + if (ret) + goto err_media_entity_cleanup; + } + + ret = v4l2_async_register_subdev(sd); + if (ret) + goto err_free_irq; + return 0; +err_free_irq: + if (state->irq > 0) + free_irq(client->irq, state); +err_media_entity_cleanup: + media_entity_cleanup(&sd->entity); err_free_ctrl: adv7180_exit_controls(state); -err_unreg_subdev: +err_unregister_vpp_client: + if (state->chip_info->flags & ADV7180_FLAG_I2P) + i2c_unregister_device(state->vpp_client); +err_unregister_csi_client: + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) + i2c_unregister_device(state->csi_client); mutex_destroy(&state->mutex); - v4l2_device_unregister_subdev(sd); - kfree(state); -err: - printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret); return ret; } @@ -593,71 +1258,90 @@ struct v4l2_subdev *sd = i2c_get_clientdata(client); struct adv7180_state *state = to_state(sd); - if (state->irq > 0) { + v4l2_async_unregister_subdev(sd); + + if (state->irq > 0) free_irq(client->irq, state); - if (cancel_work_sync(&state->work)) { - /* - * Work was pending, therefore we need to enable - * IRQ here to balance the disable_irq() done in the - * interrupt handler. - */ - enable_irq(state->irq); - } - } + + media_entity_cleanup(&sd->entity); + adv7180_exit_controls(state); + + if (state->chip_info->flags & ADV7180_FLAG_I2P) + i2c_unregister_device(state->vpp_client); + if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) + i2c_unregister_device(state->csi_client); mutex_destroy(&state->mutex); - v4l2_device_unregister_subdev(sd); - kfree(to_state(sd)); + return 0; } static const struct i2c_device_id adv7180_id[] = { - {KBUILD_MODNAME, 0}, + { "adv7180", (kernel_ulong_t)&adv7180_info }, + { "adv7182", (kernel_ulong_t)&adv7182_info }, + { "adv7280", (kernel_ulong_t)&adv7280_info }, + { "adv7280-m", (kernel_ulong_t)&adv7280_m_info }, + { "adv7281", (kernel_ulong_t)&adv7281_info }, + { "adv7281-m", (kernel_ulong_t)&adv7281_m_info }, + { "adv7281-ma", (kernel_ulong_t)&adv7281_ma_info }, + { "adv7282", (kernel_ulong_t)&adv7282_info }, + { "adv7282-m", (kernel_ulong_t)&adv7282_m_info }, {}, }; +MODULE_DEVICE_TABLE(i2c, adv7180_id); -#ifdef CONFIG_PM -static int adv7180_suspend(struct i2c_client *client, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int adv7180_suspend(struct device *dev) { - int ret; + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7180_state *state = to_state(sd); - ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, - ADV7180_PWR_MAN_OFF); - if (ret < 0) - return ret; - return 0; + return adv7180_set_power(state, false); } -static int adv7180_resume(struct i2c_client *client) +static int adv7180_resume(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *sd = i2c_get_clientdata(client); struct adv7180_state *state = to_state(sd); int ret; - ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, - ADV7180_PWR_MAN_ON); + ret = init_device(state); if (ret < 0) return ret; - ret = init_device(client, state); - if (ret < 0) + + ret = adv7180_set_power(state, state->powered); + if (ret) return ret; + return 0; } + +static SIMPLE_DEV_PM_OPS(adv7180_pm_ops, adv7180_suspend, adv7180_resume); +#define ADV7180_PM_OPS (&adv7180_pm_ops) + +#else +#define ADV7180_PM_OPS NULL #endif -MODULE_DEVICE_TABLE(i2c, adv7180_id); +#ifdef CONFIG_OF +static const struct of_device_id adv7180_of_id[] = { + { .compatible = "adi,adv7180", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, adv7180_of_id); +#endif static struct i2c_driver adv7180_driver = { .driver = { - .owner = THIS_MODULE, .name = KBUILD_MODNAME, + .pm = ADV7180_PM_OPS, + .of_match_table = of_match_ptr(adv7180_of_id), }, .probe = adv7180_probe, .remove = adv7180_remove, -#ifdef CONFIG_PM - .suspend = adv7180_suspend, - .resume = adv7180_resume, -#endif .id_table = adv7180_id, };