--- zzzz-none-000/linux-3.10.107/drivers/media/pci/cx23885/cx23885-dvb.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/media/pci/cx23885/cx23885-dvb.c	2021-02-04 17:41:59.000000000 +0000
@@ -13,10 +13,6 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *
  *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -44,6 +40,7 @@
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
 #include "dib7000p.h"
+#include "dib0070.h"
 #include "dibx000_common.h"
 #include "zl10353.h"
 #include "stv0900.h"
@@ -51,6 +48,7 @@
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
+#include "cx24117.h"
 #include "cimax2.h"
 #include "lgs8gxx.h"
 #include "netup-eeprom.h"
@@ -69,6 +67,13 @@
 #include "stb6100_cfg.h"
 #include "tda10071.h"
 #include "a8293.h"
+#include "mb86a20s.h"
+#include "si2165.h"
+#include "si2168.h"
+#include "si2157.h"
+#include "sp2.h"
+#include "m88ds3103.h"
+#include "m88rs6000t.h"
 
 static unsigned int debug;
 
@@ -87,67 +92,96 @@
 
 /* ------------------------------------------------------------------ */
 
-static int dvb_buf_setup(struct videobuf_queue *q,
-			 unsigned int *count, unsigned int *size)
+static int queue_setup(struct vb2_queue *q, const void *parg,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], void *alloc_ctxs[])
 {
-	struct cx23885_tsport *port = q->priv_data;
+	struct cx23885_tsport *port = q->drv_priv;
 
 	port->ts_packet_size  = 188 * 4;
 	port->ts_packet_count = 32;
-
-	*size  = port->ts_packet_size * port->ts_packet_count;
-	*count = 32;
+	*num_planes = 1;
+	sizes[0] = port->ts_packet_size * port->ts_packet_count;
+	alloc_ctxs[0] = port->dev->alloc_ctx;
+	*num_buffers = 32;
 	return 0;
 }
 
-static int dvb_buf_prepare(struct videobuf_queue *q,
-			   struct videobuf_buffer *vb, enum v4l2_field field)
+
+static int buffer_prepare(struct vb2_buffer *vb)
 {
-	struct cx23885_tsport *port = q->priv_data;
-	return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer *buf =
+		container_of(vbuf, struct cx23885_buffer, vb);
+
+	return cx23885_buf_prepare(buf, port);
 }
 
-static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+static void buffer_finish(struct vb2_buffer *vb)
 {
-	struct cx23885_tsport *port = q->priv_data;
-	cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_buffer *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(dev, buf);
 }
 
-static void dvb_buf_release(struct videobuf_queue *q,
-			    struct videobuf_buffer *vb)
+static void buffer_queue(struct vb2_buffer *vb)
 {
-	cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
-}
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;
+	struct cx23885_buffer   *buf = container_of(vbuf,
+		struct cx23885_buffer, vb);
 
-static int cx23885_dvb_set_frontend(struct dvb_frontend *fe);
+	cx23885_buf_queue(port, buf);
+}
 
 static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)
 {
-	struct videobuf_dvb_frontends *f;
-	struct videobuf_dvb_frontend *fe;
+	struct vb2_dvb_frontends *f;
+	struct vb2_dvb_frontend *fe;
 
 	f = &port->frontends;
 
 	if (f->gate <= 1) /* undefined or fe0 */
-		fe = videobuf_dvb_get_frontend(f, 1);
+		fe = vb2_dvb_get_frontend(f, 1);
 	else
-		fe = videobuf_dvb_get_frontend(f, f->gate);
+		fe = vb2_dvb_get_frontend(f, f->gate);
 
 	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
 		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+}
 
-	/*
-	 * FIXME: Improve this path to avoid calling the
-	 * cx23885_dvb_set_frontend() every time it passes here.
-	 */
-	cx23885_dvb_set_frontend(fe->dvb.frontend);
+static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx23885_tsport *port = q->drv_priv;
+	struct cx23885_dmaqueue *dmaq = &port->mpegq;
+	struct cx23885_buffer *buf = list_entry(dmaq->active.next,
+			struct cx23885_buffer, queue);
+
+	cx23885_start_dma(port, dmaq, buf);
+	return 0;
 }
 
-static struct videobuf_queue_ops dvb_qops = {
-	.buf_setup    = dvb_buf_setup,
-	.buf_prepare  = dvb_buf_prepare,
-	.buf_queue    = dvb_buf_queue,
-	.buf_release  = dvb_buf_release,
+static void cx23885_stop_streaming(struct vb2_queue *q)
+{
+	struct cx23885_tsport *port = q->drv_priv;
+
+	cx23885_cancel_buffers(port);
+}
+
+static struct vb2_ops dvb_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = cx23885_start_streaming,
+	.stop_streaming = cx23885_stop_streaming,
 };
 
 static struct s5h1409_config hauppauge_generic_config = {
@@ -308,6 +342,11 @@
 	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
+static struct tda18271_config hauppauge_hvr4400_tuner_config = {
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
 	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
 		      .if_lvl = 1, .rfagc_top = 0x58 },
@@ -468,6 +507,10 @@
 	.demod_address = 0x55,
 };
 
+static struct cx24117_config tbs_cx24117_config = {
+	.demod_address = 0x55,
+};
+
 static struct ds3000_config tevii_ds3000_config = {
 	.demod_address = 0x68,
 };
@@ -475,6 +518,7 @@
 static struct ts2020_config tevii_ts2020_config  = {
 	.tuner_address = 0x60,
 	.clk_out_div = 1,
+	.frequency_div = 1146000,
 };
 
 static struct cx24116_config dvbworld_cx24116_config = {
@@ -500,6 +544,15 @@
 	.if_khz = 5380,
 };
 
+static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
+	.demod_address = 0x10,
+};
+
+static struct xc5000_config mygica_x8507_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 4000,
+};
+
 static struct stv090x_config prof_8000_stv090x_config = {
 	.device                 = STV0903,
 	.demod_mode             = STV090x_SINGLE,
@@ -522,7 +575,8 @@
 	.refclock = 27000000,
 };
 
-static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+static int p8000_set_voltage(struct dvb_frontend *fe,
+			     enum fe_sec_voltage voltage)
 {
 	struct cx23885_tsport *port = fe->dvb->priv;
 	struct cx23885_dev *dev = port->dev;
@@ -536,6 +590,132 @@
 	return 0;
 }
 
+static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx23885_gpio_set(dev, GPIO_1);
+		cx23885_gpio_clear(dev, GPIO_0);
+		break;
+	case SEC_VOLTAGE_18:
+		cx23885_gpio_set(dev, GPIO_1);
+		cx23885_gpio_set(dev, GPIO_0);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx23885_gpio_clear(dev, GPIO_1);
+		cx23885_gpio_clear(dev, GPIO_0);
+		break;
+	}
+
+	/* call the frontend set_voltage function */
+	port->fe_set_voltage(fe, voltage);
+
+	return 0;
+}
+
+static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx23885_gpio_set(dev, GPIO_13);
+		cx23885_gpio_clear(dev, GPIO_12);
+		break;
+	case SEC_VOLTAGE_18:
+		cx23885_gpio_set(dev, GPIO_13);
+		cx23885_gpio_set(dev, GPIO_12);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx23885_gpio_clear(dev, GPIO_13);
+		cx23885_gpio_clear(dev, GPIO_12);
+		break;
+	}
+	/* call the frontend set_voltage function */
+	return port->fe_set_voltage(fe, voltage);
+}
+
+static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
+				u8 data, int *mem)
+{
+	/* MC417 */
+	#define SP2_DATA              0x000000ff
+	#define SP2_WR                0x00008000
+	#define SP2_RD                0x00004000
+	#define SP2_ACK               0x00001000
+	#define SP2_ADHI              0x00000800
+	#define SP2_ADLO              0x00000400
+	#define SP2_CS1               0x00000200
+	#define SP2_CS0               0x00000100
+	#define SP2_EN_ALL            0x00001000
+	#define SP2_CTRL_OFF          (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)
+
+	struct cx23885_tsport *port = priv;
+	struct cx23885_dev *dev = port->dev;
+	int ret;
+	int tmp = 0;
+	unsigned long timeout;
+
+	mutex_lock(&dev->gpio_lock);
+
+	/* write addr */
+	cx_write(MC417_OEN, SP2_EN_ALL);
+	cx_write(MC417_RWD, SP2_CTRL_OFF |
+				SP2_ADLO | (0xff & addr));
+	cx_clear(MC417_RWD, SP2_ADLO);
+	cx_write(MC417_RWD, SP2_CTRL_OFF |
+				SP2_ADHI | (0xff & (addr >> 8)));
+	cx_clear(MC417_RWD, SP2_ADHI);
+
+	if (read)
+		/* data in */
+		cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);
+	else
+		/* data out */
+		cx_write(MC417_RWD, SP2_CTRL_OFF | data);
+
+	/* chip select 0 */
+	cx_clear(MC417_RWD, SP2_CS0);
+
+	/* read/write */
+	cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);
+
+	/* wait for a maximum of 1 msec */
+	timeout = jiffies + msecs_to_jiffies(1);
+	while (!time_after(jiffies, timeout)) {
+		tmp = cx_read(MC417_RWD);
+		if ((tmp & SP2_ACK) == 0)
+			break;
+		usleep_range(50, 100);
+	}
+
+	cx_set(MC417_RWD, SP2_CTRL_OFF);
+	*mem = tmp & 0xff;
+
+	mutex_unlock(&dev->gpio_lock);
+
+	if (!read) {
+		if (*mem < 0) {
+			ret = -EREMOTEIO;
+			goto err;
+		}
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
@@ -556,14 +736,27 @@
 		}
 		break;
 	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MYGICA_X8507:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 		/* Select Digital TV */
 		cx23885_gpio_set(dev, GPIO_0);
 		break;
 	}
+
+	/* Call the real set_frontend */
+	if (port->set_frontend)
+		return port->set_frontend(fe);
+
 	return 0;
 }
 
+static void cx23885_set_frontend_hook(struct cx23885_tsport *port,
+				     struct dvb_frontend *fe)
+{
+	port->set_frontend = fe->ops.set_frontend;
+	fe->ops.set_frontend = cx23885_dvb_set_frontend;
+}
+
 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
 	.prod = LGS8GXX_PROD_LGS8G75,
 	.demod_address = 0x19,
@@ -667,18 +860,67 @@
 	},
 };
 
-static const struct tda10071_config hauppauge_tda10071_config = {
-	.demod_i2c_addr = 0x05,
-	.tuner_i2c_addr = 0x54,
+static const struct tda10071_platform_data hauppauge_tda10071_pdata = {
+	.clk = 40444000, /* 40.444 MHz */
 	.i2c_wr_max = 64,
 	.ts_mode = TDA10071_TS_SERIAL,
-	.spec_inv = 0,
-	.xtal = 40444000, /* 40.444 MHz */
 	.pll_multiplier = 20,
+	.tuner_i2c_addr = 0x54,
+};
+
+static const struct si2165_config hauppauge_hvr4400_si2165_config = {
+	.i2c_addr	= 0x64,
+	.chip_mode	= SI2165_MODE_PLL_XTAL,
+	.ref_freq_Hz	= 16000000,
+};
+
+static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_PARALLEL,
+	.ts_clk = 16000,
+	.ts_clk_pol = 1,
+	.lnb_en_pol = 1,
+	.lnb_hv_pol = 0,
+	.agc = 0x99,
 };
 
-static const struct a8293_config hauppauge_a8293_config = {
-	.i2c_addr = 0x0b,
+static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_CI,
+	.ts_clk = 10000,
+	.ts_clk_pol = 1,
+	.lnb_en_pol = 1,
+	.lnb_hv_pol = 0,
+	.agc = 0x99,
+};
+
+static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_SERIAL,
+	.ts_clk = 96000,
+	.ts_clk_pol = 0,
+	.lnb_en_pol = 1,
+	.lnb_hv_pol = 0,
+	.agc = 0x99,
+};
+
+static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {
+	.i2c_addr = 0x69,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.ts_mode = M88DS3103_TS_PARALLEL,
+	.ts_clk = 16000,
+	.ts_clk_pol = 1,
+	.agc = 0x99,
 };
 
 static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
@@ -725,20 +967,240 @@
 	return 0;
 };
 
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	struct dib7000p_ops *dib7000p_ops = fe->sec_priv;
+
+	return dib7000p_ops->set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return 0;
+}
+
+static struct dib0070_config dib7070p_dib0070_config = {
+	.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	.reset = dib7070_tuner_reset,
+	.sleep = dib7070_tuner_sleep,
+	.clock_khz = 12000,
+	.freq_offset_khz_vhf = 550,
+	/* .flip_chip = 1, */
+};
+
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+
+	/*
+	 * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
+	 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
+		 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+	.inv_gain = 600,
+	.time_stabiliz = 10,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+	.agc1_max = 65535,
+	.agc1_min = 0,
+	.agc2_max = 65535,
+	.agc2_min = 0,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 40,
+	.agc1_pt3 = 183,
+	.agc1_slope1 = 206,
+	.agc1_slope2 = 255,
+	.agc2_pt1 = 72,
+	.agc2_pt2 = 152,
+	.agc2_slope1 = 88,
+	.agc2_slope2 = 90,
+	.alpha_mant = 17,
+	.alpha_exp = 27,
+	.beta_mant = 23,
+	.beta_exp = 51,
+	.perform_agc_softsplit = 0,
+};
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 20,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	/* refsel, sel, freq_15k */
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20452225,
+	.xtal_hz = 12000000,
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+	/* .output_mode = OUTMODE_MPEG2_FIFO, */
+	.output_mode = OUTMODE_MPEG2_SERIAL,
+	/* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */
+	.gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+};
+
+static int dvb_register_ci_mac(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct i2c_client *client_ci = NULL;
+	struct vb2_dvb_frontend *fe0;
+
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+		static struct netup_card_info cinfo;
+
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		memcpy(port->frontends.adapter.proposed_mac,
+				cinfo.port[port->nr - 1].mac, 6);
+		printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
+			port->nr, port->frontends.adapter.proposed_mac);
+
+		netup_ci_init(port);
+		return 0;
+		}
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+		struct altera_ci_config netup_ci_cfg = {
+			.dev = dev,/* magic number to identify*/
+			.adapter = &port->frontends.adapter,/* for CI */
+			.demux = &fe0->dvb.demux,/* for hw pid filter */
+			.fpga_rw = netup_altera_fpga_rw,
+		};
+
+		altera_ci_init(&netup_ci_cfg, port->nr);
+		return 0;
+		}
+	case CX23885_BOARD_TEVII_S470: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+		if (port->nr != 1)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+		printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
+		return 0;
+		}
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_S950:
+	case CX23885_BOARD_DVBSKY_S952:
+	case CX23885_BOARD_DVBSKY_T982: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+		if (port->nr > 2)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+				sizeof(eeprom));
+		printk(KERN_INFO "%s port %d MAC address: %pM\n",
+			cx23885_boards[dev->board].name, port->nr,
+			eeprom + 0xc0 + (port->nr-1) * 8);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
+			(port->nr-1) * 8, 6);
+		return 0;
+		}
+	case CX23885_BOARD_DVBSKY_S950C:
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_TT_CT2_4500_CI: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+		struct sp2_config sp2_config;
+		struct i2c_board_info info;
+		struct cx23885_i2c *i2c_bus2 = &dev->i2c_bus[1];
+
+		/* attach CI */
+		memset(&sp2_config, 0, sizeof(sp2_config));
+		sp2_config.dvb_adap = &port->frontends.adapter;
+		sp2_config.priv = port;
+		sp2_config.ci_control = cx23885_sp2_ci_ctrl;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "sp2", I2C_NAME_SIZE);
+		info.addr = 0x40;
+		info.platform_data = &sp2_config;
+		request_module(info.type);
+		client_ci = i2c_new_device(&i2c_bus2->i2c_adap, &info);
+		if (client_ci == NULL || client_ci->dev.driver == NULL)
+			return -ENODEV;
+		if (!try_module_get(client_ci->dev.driver->owner)) {
+			i2c_unregister_device(client_ci);
+			return -ENODEV;
+		}
+		port->i2c_client_ci = client_ci;
+
+		if (port->nr != 1)
+			return 0;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+				sizeof(eeprom));
+		printk(KERN_INFO "%s MAC address: %pM\n",
+			cx23885_boards[dev->board].name, eeprom + 0xc0);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);
+		return 0;
+		}
+	}
+	return 0;
+}
+
 static int dvb_register(struct cx23885_tsport *port)
 {
+	struct dib7000p_ops dib7000p_ops;
 	struct cx23885_dev *dev = port->dev;
 	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
-	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+	struct vb2_dvb_frontend *fe0, *fe1 = NULL;
+	struct si2168_config si2168_config;
+	struct si2157_config si2157_config;
+	struct ts2020_config ts2020_config;
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client_demod = NULL, *client_tuner = NULL;
+	struct i2c_client *client_sec = NULL;
+	const struct m88ds3103_config *p_m88ds3103_config = NULL;
+	int (*p_set_voltage)(struct dvb_frontend *fe,
+			     enum fe_sec_voltage voltage) = NULL;
 	int mfe_shared = 0; /* bus not shared by default */
 	int ret;
 
 	/* Get the first frontend */
-	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
 	if (!fe0)
 		return -EINVAL;
 
-	/* init struct videobuf_dvb */
+	/* init struct vb2_dvb */
 	fe0->dvb.name = dev->name;
 
 	/* multi-frontend gate control is undefined or defaults to fe0 */
@@ -754,11 +1216,11 @@
 		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_generic_config,
 						&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(mt2131_attach, fe0->dvb.frontend,
-				   &i2c_bus->i2c_adap,
-				   &hauppauge_generic_tunerconfig, 0);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(mt2131_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_generic_tunerconfig, 0);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
@@ -766,11 +1228,13 @@
 		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
 					       &hauppauge_lgdt3305_config,
 					       &i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(tda18271_attach, fe0->dvb.frontend,
-				   0x60, &dev->i2c_bus[1].i2c_adap,
-				   &hauppauge_hvr127x_config);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_hvr127x_config);
+		if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275)
+			cx23885_set_frontend_hook(port, fe0->dvb.frontend);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
@@ -778,11 +1242,12 @@
 		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 					       &hcw_s5h1411_config,
 					       &i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(tda18271_attach, fe0->dvb.frontend,
-				   0x60, &dev->i2c_bus[1].i2c_adap,
-				   &hauppauge_tda18271_config);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_tda18271_config);
 
 		tda18271_attach(&dev->ts1.analog_fe,
 			0x60, &dev->i2c_bus[1].i2c_adap,
@@ -797,14 +1262,15 @@
 				dvb_attach(s5h1409_attach,
 					   &hauppauge_ezqam_config,
 					   &i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL) {
-				dvb_attach(tda829x_attach, fe0->dvb.frontend,
-					   &dev->i2c_bus[1].i2c_adap, 0x42,
-					   &tda829x_no_probe);
-				dvb_attach(tda18271_attach, fe0->dvb.frontend,
-					   0x60, &dev->i2c_bus[1].i2c_adap,
-					   &hauppauge_tda18271_config);
-			}
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				   &dev->i2c_bus[1].i2c_adap, 0x42,
+				   &tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_tda18271_config);
 			break;
 		case 0:
 		default:
@@ -812,11 +1278,11 @@
 				dvb_attach(s5h1409_attach,
 					   &hauppauge_generic_config,
 					   &i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL)
-				dvb_attach(mt2131_attach, fe0->dvb.frontend,
-					   &i2c_bus->i2c_adap,
-					   &hauppauge_generic_tunerconfig, 0);
-			break;
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_generic_tunerconfig, 0);
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
@@ -824,32 +1290,33 @@
 		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_hvr1800lp_config,
 						&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(mt2131_attach, fe0->dvb.frontend,
-				   &i2c_bus->i2c_adap,
-				   &hauppauge_generic_tunerconfig, 0);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(mt2131_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_generic_tunerconfig, 0);
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
 		i2c_bus = &dev->i2c_bus[0];
 		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 						&fusionhdtv_5_express,
 						&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
-				   &i2c_bus->i2c_adap, 0x61,
-				   TUNER_LG_TDVS_H06XF);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap, 0x61,
+			   TUNER_LG_TDVS_H06XF);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 		i2c_bus = &dev->i2c_bus[1];
 		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_hvr1500q_config,
 						&dev->i2c_bus[0].i2c_adap);
-		if (fe0->dvb.frontend != NULL)
-			dvb_attach(xc5000_attach, fe0->dvb.frontend,
-				   &i2c_bus->i2c_adap,
-				   &hauppauge_hvr1500q_tunerconfig);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus->i2c_adap,
+			   &hauppauge_hvr1500q_tunerconfig);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 		i2c_bus = &dev->i2c_bus[1];
@@ -880,14 +1347,14 @@
 		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 			&hauppauge_hvr1200_config,
 			&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(tda829x_attach, fe0->dvb.frontend,
-				&dev->i2c_bus[1].i2c_adap, 0x42,
-				&tda829x_no_probe);
-			dvb_attach(tda18271_attach, fe0->dvb.frontend,
-				0x60, &dev->i2c_bus[1].i2c_adap,
-				&hauppauge_hvr1200_tuner_config);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda829x_attach, fe0->dvb.frontend,
+			   &dev->i2c_bus[1].i2c_adap, 0x42,
+			   &tda829x_no_probe);
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[1].i2c_adap,
+			   &hauppauge_hvr1200_tuner_config);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		i2c_bus = &dev->i2c_bus[0];
@@ -902,8 +1369,11 @@
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 		i2c_bus = &dev->i2c_bus[0];
-		fe0->dvb.frontend = dvb_attach(dib7000p_attach,
-			&i2c_bus->i2c_adap,
+
+		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
+			return -ENODEV;
+
+		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap,
 			0x12, &hauppauge_hvr1400_dib7000_config);
 		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend *fe;
@@ -966,6 +1436,30 @@
 		}
 		break;
 	}
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: {
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+		/* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */
+		/* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */
+
+		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))
+			return -ENODEV;
+
+		if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) {
+			printk(KERN_WARNING "Unable to enumerate dib7000p\n");
+			return -ENODEV;
+		}
+		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config);
+		if (fe0->dvb.frontend != NULL) {
+			struct i2c_adapter *tun_i2c;
+
+			fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL);
+			memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops));
+			tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);
+			if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))
+				return -ENODEV;
+		}
+		break;
+	}
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
@@ -1027,6 +1521,25 @@
 			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		i2c_bus = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* PORT B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap);
+			break;
+		/* PORT C */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap);
+			break;
+		}
+		break;
 	case CX23885_BOARD_TEVII_S470:
 		i2c_bus = &dev->i2c_bus[1];
 
@@ -1100,12 +1613,25 @@
 		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
 			&mygica_x8506_lgs8gl5_config,
 			&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(xc5000_attach,
-				fe0->dvb.frontend,
-				&i2c_bus2->i2c_adap,
-				&mygica_x8506_xc5000_config);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+		break;
+	case CX23885_BOARD_MYGICA_X8507:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+			&mygica_x8507_mb86a20s_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap,
+			   &mygica_x8507_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
 		break;
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 		i2c_bus = &dev->i2c_bus[0];
@@ -1113,22 +1639,23 @@
 		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
 			&magicpro_prohdtve2_lgs8g75_config,
 			&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(xc5000_attach,
-				fe0->dvb.frontend,
-				&i2c_bus2->i2c_adap,
-				&magicpro_prohdtve2_xc5000_config);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(xc5000_attach, fe0->dvb.frontend,
+			   &i2c_bus2->i2c_adap,
+			   &magicpro_prohdtve2_xc5000_config);
+		cx23885_set_frontend_hook(port, fe0->dvb.frontend);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		i2c_bus = &dev->i2c_bus[0];
 		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 			&hcw_s5h1411_config,
 			&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL)
-			dvb_attach(tda18271_attach, fe0->dvb.frontend,
-				0x60, &dev->i2c_bus[0].i2c_adap,
-				&hauppauge_tda18271_config);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[0].i2c_adap,
+			   &hauppauge_tda18271_config);
 
 		tda18271_attach(&dev->ts1.analog_fe,
 			0x60, &dev->i2c_bus[1].i2c_adap,
@@ -1140,10 +1667,11 @@
 		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 			&hcw_s5h1411_config,
 			&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL)
-			dvb_attach(tda18271_attach, fe0->dvb.frontend,
-				0x60, &dev->i2c_bus[0].i2c_adap,
-				&hauppauge_tda18271_config);
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(tda18271_attach, fe0->dvb.frontend,
+			   0x60, &dev->i2c_bus[0].i2c_adap,
+			   &hauppauge_tda18271_config);
 		break;
 	case CX23885_BOARD_MYGICA_X8558PRO:
 		switch (port->nr) {
@@ -1153,12 +1681,11 @@
 			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
 				&mygica_x8558pro_atbm8830_cfg1,
 				&i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL) {
-				dvb_attach(max2165_attach,
-					fe0->dvb.frontend,
-					&i2c_bus->i2c_adap,
-					&mygic_x8558pro_max2165_cfg1);
-			}
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(max2165_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &mygic_x8558pro_max2165_cfg1);
 			break;
 		/* port C */
 		case 2:
@@ -1166,13 +1693,11 @@
 			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
 				&mygica_x8558pro_atbm8830_cfg2,
 				&i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL) {
-				dvb_attach(max2165_attach,
-					fe0->dvb.frontend,
-					&i2c_bus->i2c_adap,
-					&mygic_x8558pro_max2165_cfg2);
-			}
-			break;
+			if (fe0->dvb.frontend == NULL)
+				break;
+			dvb_attach(max2165_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &mygic_x8558pro_max2165_cfg2);
 		}
 		break;
 	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
@@ -1184,31 +1709,32 @@
 		fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
 					&netup_stv0367_config[port->nr - 1],
 					&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			if (NULL == dvb_attach(xc5000_attach,
-					fe0->dvb.frontend,
+		if (fe0->dvb.frontend == NULL)
+			break;
+		if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend,
 					&i2c_bus->i2c_adap,
 					&netup_xc5000_config[port->nr - 1]))
-				goto frontend_detach;
-			/* load xc5000 firmware */
-			fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
-		}
+			goto frontend_detach;
+		/* load xc5000 firmware */
+		fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
+
 		/* MFE frontend 2 */
-		fe1 = videobuf_dvb_get_frontend(&port->frontends, 2);
+		fe1 = vb2_dvb_get_frontend(&port->frontends, 2);
 		if (fe1 == NULL)
 			goto frontend_detach;
 		/* DVB-C init */
 		fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
 					&netup_stv0367_config[port->nr - 1],
 					&i2c_bus->i2c_adap);
-		if (fe1->dvb.frontend != NULL) {
-			fe1->dvb.frontend->id = 1;
-			if (NULL == dvb_attach(xc5000_attach,
-					fe1->dvb.frontend,
-					&i2c_bus->i2c_adap,
-					&netup_xc5000_config[port->nr - 1]))
-				goto frontend_detach;
-		}
+		if (fe1->dvb.frontend == NULL)
+			break;
+
+		fe1->dvb.frontend->id = 1;
+		if (NULL == dvb_attach(xc5000_attach,
+				       fe1->dvb.frontend,
+				       &i2c_bus->i2c_adap,
+				       &netup_xc5000_config[port->nr - 1]))
+			goto frontend_detach;
 		break;
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 		i2c_bus = &dev->i2c_bus[0];
@@ -1220,26 +1746,26 @@
 			fe0->dvb.frontend = dvb_attach(drxk_attach,
 					&terratec_drxk_config[0],
 					&i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL) {
-				if (!dvb_attach(mt2063_attach,
-						fe0->dvb.frontend,
-						&terratec_mt2063_config[0],
-						&i2c_bus2->i2c_adap))
-					goto frontend_detach;
-			}
+			if (fe0->dvb.frontend == NULL)
+				break;
+			if (!dvb_attach(mt2063_attach,
+					fe0->dvb.frontend,
+					&terratec_mt2063_config[0],
+					&i2c_bus2->i2c_adap))
+				goto frontend_detach;
 			break;
 		/* port c */
 		case 2:
 			fe0->dvb.frontend = dvb_attach(drxk_attach,
 					&terratec_drxk_config[1],
 					&i2c_bus->i2c_adap);
-			if (fe0->dvb.frontend != NULL) {
-				if (!dvb_attach(mt2063_attach,
-						fe0->dvb.frontend,
-						&terratec_mt2063_config[1],
-						&i2c_bus2->i2c_adap))
-					goto frontend_detach;
-			}
+			if (fe0->dvb.frontend == NULL)
+				break;
+			if (!dvb_attach(mt2063_attach,
+					fe0->dvb.frontend,
+					&terratec_mt2063_config[1],
+					&i2c_bus2->i2c_adap))
+				goto frontend_detach;
 			break;
 		}
 		break;
@@ -1249,10 +1775,10 @@
 		fe0->dvb.frontend = dvb_attach(ds3000_attach,
 					&tevii_ds3000_config,
 					&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(ts2020_attach, fe0->dvb.frontend,
-				&tevii_ts2020_config, &i2c_bus->i2c_adap);
-		}
+		if (fe0->dvb.frontend == NULL)
+			break;
+		dvb_attach(ts2020_attach, fe0->dvb.frontend,
+			   &tevii_ts2020_config, &i2c_bus->i2c_adap);
 		break;
 	case CX23885_BOARD_PROF_8000:
 		i2c_bus = &dev->i2c_bus[0];
@@ -1261,27 +1787,488 @@
 						&prof_8000_stv090x_config,
 						&i2c_bus->i2c_adap,
 						STV090x_DEMODULATOR_0);
-		if (fe0->dvb.frontend != NULL) {
-			if (!dvb_attach(stb6100_attach,
+		if (fe0->dvb.frontend == NULL)
+			break;
+		if (!dvb_attach(stb6100_attach,
+				fe0->dvb.frontend,
+				&prof_8000_stb6100_config,
+				&i2c_bus->i2c_adap))
+			goto frontend_detach;
+
+		fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR4400: {
+		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
+		struct a8293_platform_data a8293_pdata = {};
+
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			/* attach demod + tuner combo */
+			memset(&info, 0, sizeof(info));
+			strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
+			info.addr = 0x05;
+			info.platform_data = &tda10071_pdata;
+			request_module("tda10071");
+			client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+			if (!client_demod || !client_demod->dev.driver)
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
+			port->i2c_client_demod = client_demod;
+
+			/* attach SEC */
+			a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(info));
+			strlcpy(info.type, "a8293", I2C_NAME_SIZE);
+			info.addr = 0x0b;
+			info.platform_data = &a8293_pdata;
+			request_module("a8293");
+			client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
+			if (!client_sec || !client_sec->dev.driver)
+				goto frontend_detach;
+			if (!try_module_get(client_sec->dev.driver->owner)) {
+				i2c_unregister_device(client_sec);
+				goto frontend_detach;
+			}
+			port->i2c_client_sec = client_sec;
+			break;
+		/* port c */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(si2165_attach,
+					&hauppauge_hvr4400_si2165_config,
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (!dvb_attach(tda18271_attach,
 					fe0->dvb.frontend,
-					&prof_8000_stb6100_config,
-					&i2c_bus->i2c_adap))
+					0x60, &i2c_bus2->i2c_adap,
+				  &hauppauge_hvr4400_tuner_config))
 				goto frontend_detach;
+			break;
+		}
+		break;
+	}
+	case CX23885_BOARD_HAUPPAUGE_STARBURST: {
+		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;
+		struct a8293_platform_data a8293_pdata = {};
+
+		i2c_bus = &dev->i2c_bus[0];
+
+		/* attach demod + tuner combo */
+		memset(&info, 0, sizeof(info));
+		strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);
+		info.addr = 0x05;
+		info.platform_data = &tda10071_pdata;
+		request_module("tda10071");
+		client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+		if (!client_demod || !client_demod->dev.driver)
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);
+		port->i2c_client_demod = client_demod;
 
-			fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
+		/* attach SEC */
+		a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+		memset(&info, 0, sizeof(info));
+		strlcpy(info.type, "a8293", I2C_NAME_SIZE);
+		info.addr = 0x0b;
+		info.platform_data = &a8293_pdata;
+		request_module("a8293");
+		client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
+		if (!client_sec || !client_sec->dev.driver)
+			goto frontend_detach;
+		if (!try_module_get(client_sec->dev.driver->owner)) {
+			i2c_unregister_device(client_sec);
+			goto frontend_detach;
 		}
+		port->i2c_client_sec = client_sec;
 		break;
-	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	}
+	case CX23885_BOARD_DVBSKY_T9580:
+	case CX23885_BOARD_DVBSKY_S950:
 		i2c_bus = &dev->i2c_bus[0];
-		fe0->dvb.frontend = dvb_attach(tda10071_attach,
-						&hauppauge_tda10071_config,
-						&i2c_bus->i2c_adap);
-		if (fe0->dvb.frontend != NULL) {
-			dvb_attach(a8293_attach, fe0->dvb.frontend,
-				   &i2c_bus->i2c_adap,
-				   &hauppauge_a8293_config);
+		i2c_bus2 = &dev->i2c_bus[1];
+		switch (port->nr) {
+		/* port b - satellite */
+		case 1:
+			/* attach frontend */
+			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+					&dvbsky_t9580_m88ds3103_config,
+					&i2c_bus2->i2c_adap, &adapter);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&ts2020_config, 0, sizeof(ts2020_config));
+			ts2020_config.fe = fe0->dvb.frontend;
+			ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &ts2020_config;
+			request_module(info.type);
+			client_tuner = i2c_new_device(adapter, &info);
+			if (client_tuner == NULL ||
+					client_tuner->dev.driver == NULL)
+				goto frontend_detach;
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+
+			/* delegate signal strength measurement to tuner */
+			fe0->dvb.frontend->ops.read_signal_strength =
+				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+			/*
+			 * for setting the voltage we need to set GPIOs on
+			 * the card.
+			 */
+			port->fe_set_voltage =
+				fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+				dvbsky_t9580_set_voltage;
+
+			port->i2c_client_tuner = client_tuner;
+
+			break;
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+			if (client_demod == NULL ||
+					client_demod->dev.driver == NULL)
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_device(adapter, &info);
+			if (client_tuner == NULL ||
+					client_tuner->dev.driver == NULL)
+				goto frontend_detach;
+
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
+	case CX23885_BOARD_DVBSKY_T980C:
+	case CX23885_BOARD_TT_CT2_4500_CI:
+		i2c_bus = &dev->i2c_bus[1];
+		i2c_bus2 = &dev->i2c_bus[0];
+
+		/* attach frontend */
+		memset(&si2168_config, 0, sizeof(si2168_config));
+		si2168_config.i2c_adapter = &adapter;
+		si2168_config.fe = &fe0->dvb.frontend;
+		si2168_config.ts_mode = SI2168_TS_PARALLEL;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+		info.addr = 0x64;
+		info.platform_data = &si2168_config;
+		request_module(info.type);
+		client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+		if (client_demod == NULL || client_demod->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		port->i2c_client_demod = client_demod;
+
+		/* attach tuner */
+		memset(&si2157_config, 0, sizeof(si2157_config));
+		si2157_config.fe = fe0->dvb.frontend;
+		si2157_config.if_port = 1;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &si2157_config;
+		request_module(info.type);
+		client_tuner = i2c_new_device(adapter, &info);
+		if (client_tuner == NULL ||
+				client_tuner->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_DVBSKY_S950C:
+		i2c_bus = &dev->i2c_bus[1];
+		i2c_bus2 = &dev->i2c_bus[0];
+
+		/* attach frontend */
+		fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+				&dvbsky_s950c_m88ds3103_config,
+				&i2c_bus->i2c_adap, &adapter);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		/* attach tuner */
+		memset(&ts2020_config, 0, sizeof(ts2020_config));
+		ts2020_config.fe = fe0->dvb.frontend;
+		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &ts2020_config;
+		request_module(info.type);
+		client_tuner = i2c_new_device(adapter, &info);
+		if (client_tuner == NULL || client_tuner->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
 		}
+
+		/* delegate signal strength measurement to tuner */
+		fe0->dvb.frontend->ops.read_signal_strength =
+			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+		port->i2c_client_tuner = client_tuner;
 		break;
+	case CX23885_BOARD_DVBSKY_S952:
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			i2c_bus = &dev->i2c_bus[1];
+			p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
+			p_set_voltage = dvbsky_t9580_set_voltage;
+			break;
+		/* port c */
+		case 2:
+			i2c_bus = &dev->i2c_bus[0];
+			p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
+			p_set_voltage = dvbsky_s952_portc_set_voltage;
+			break;
+		}
+
+		/* attach frontend */
+		fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+				p_m88ds3103_config,
+				&i2c_bus->i2c_adap, &adapter);
+		if (fe0->dvb.frontend == NULL)
+			break;
+
+		/* attach tuner */
+		memset(&ts2020_config, 0, sizeof(ts2020_config));
+		ts2020_config.fe = fe0->dvb.frontend;
+		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &ts2020_config;
+		request_module(info.type);
+		client_tuner = i2c_new_device(adapter, &info);
+		if (client_tuner == NULL || client_tuner->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+
+		/* delegate signal strength measurement to tuner */
+		fe0->dvb.frontend->ops.read_signal_strength =
+			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+		/*
+		 * for setting the voltage we need to set GPIOs on
+		 * the card.
+		 */
+		port->fe_set_voltage =
+			fe0->dvb.frontend->ops.set_voltage;
+		fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
+
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_DVBSKY_T982:
+		memset(&si2168_config, 0, sizeof(si2168_config));
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			i2c_bus = &dev->i2c_bus[1];
+			si2168_config.ts_mode = SI2168_TS_PARALLEL;
+			break;
+		/* port c */
+		case 2:
+			i2c_bus = &dev->i2c_bus[0];
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			break;
+		}
+
+		/* attach frontend */
+		si2168_config.i2c_adapter = &adapter;
+		si2168_config.fe = &fe0->dvb.frontend;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+		info.addr = 0x64;
+		info.platform_data = &si2168_config;
+		request_module(info.type);
+		client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+		if (client_demod == NULL || client_demod->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_demod->dev.driver->owner)) {
+			i2c_unregister_device(client_demod);
+			goto frontend_detach;
+		}
+		port->i2c_client_demod = client_demod;
+
+		/* attach tuner */
+		memset(&si2157_config, 0, sizeof(si2157_config));
+		si2157_config.fe = fe0->dvb.frontend;
+		si2157_config.if_port = 1;
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+		info.addr = 0x60;
+		info.platform_data = &si2157_config;
+		request_module(info.type);
+		client_tuner = i2c_new_device(adapter, &info);
+		if (client_tuner == NULL ||
+				client_tuner->dev.driver == NULL)
+			goto frontend_detach;
+		if (!try_module_get(client_tuner->dev.driver->owner)) {
+			i2c_unregister_device(client_tuner);
+			goto frontend_detach;
+		}
+		port->i2c_client_tuner = client_tuner;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR5525: {
+		struct m88rs6000t_config m88rs6000t_config;
+		struct a8293_platform_data a8293_pdata = {};
+
+		switch (port->nr) {
+
+		/* port b - satellite */
+		case 1:
+			/* attach frontend */
+			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+					&hauppauge_hvr5525_m88ds3103_config,
+					&dev->i2c_bus[0].i2c_adap, &adapter);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach SEC */
+			a8293_pdata.dvb_frontend = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(info));
+			strlcpy(info.type, "a8293", I2C_NAME_SIZE);
+			info.addr = 0x0b;
+			info.platform_data = &a8293_pdata;
+			request_module("a8293");
+			client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (!client_sec || !client_sec->dev.driver)
+				goto frontend_detach;
+			if (!try_module_get(client_sec->dev.driver->owner)) {
+				i2c_unregister_device(client_sec);
+				goto frontend_detach;
+			}
+			port->i2c_client_sec = client_sec;
+
+			/* attach tuner */
+			memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));
+			m88rs6000t_config.fe = fe0->dvb.frontend;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE);
+			info.addr = 0x21;
+			info.platform_data = &m88rs6000t_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_device(adapter, &info);
+			if (!client_tuner || !client_tuner->dev.driver)
+				goto frontend_detach;
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+
+			/* delegate signal strength measurement to tuner */
+			fe0->dvb.frontend->ops.read_signal_strength =
+				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+			break;
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &fe0->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module("%s", info.type);
+			client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (!client_demod || !client_demod->dev.driver)
+				goto frontend_detach;
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!client_tuner || !client_tuner->dev.driver) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
+	}
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
@@ -1313,63 +2300,51 @@
 		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
 
 	/* register everything */
-	ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+	ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port,
 					&dev->pci->dev, adapter_nr, mfe_shared);
 	if (ret)
 		goto frontend_detach;
 
-	/* init CI & MAC */
-	switch (dev->board) {
-	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
-		static struct netup_card_info cinfo;
-
-		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
-		memcpy(port->frontends.adapter.proposed_mac,
-				cinfo.port[port->nr - 1].mac, 6);
-		printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
-			port->nr, port->frontends.adapter.proposed_mac);
-
-		netup_ci_init(port);
-		break;
-		}
-	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
-		struct altera_ci_config netup_ci_cfg = {
-			.dev = dev,/* magic number to identify*/
-			.adapter = &port->frontends.adapter,/* for CI */
-			.demux = &fe0->dvb.demux,/* for hw pid filter */
-			.fpga_rw = netup_altera_fpga_rw,
-		};
+	ret = dvb_register_ci_mac(port);
+	if (ret)
+		goto frontend_detach;
 
-		altera_ci_init(&netup_ci_cfg, port->nr);
-		break;
-		}
-	case CX23885_BOARD_TEVII_S470: {
-		u8 eeprom[256]; /* 24C02 i2c eeprom */
+	return 0;
 
-		if (port->nr != 1)
-			break;
+frontend_detach:
+	/* remove I2C client for SEC */
+	client_sec = port->i2c_client_sec;
+	if (client_sec) {
+		module_put(client_sec->dev.driver->owner);
+		i2c_unregister_device(client_sec);
+		port->i2c_client_sec = NULL;
+	}
 
-		/* Read entire EEPROM */
-		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
-		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
-		printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
-		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
-		break;
-		}
+	/* remove I2C client for tuner */
+	client_tuner = port->i2c_client_tuner;
+	if (client_tuner) {
+		module_put(client_tuner->dev.driver->owner);
+		i2c_unregister_device(client_tuner);
+		port->i2c_client_tuner = NULL;
 	}
 
-	return ret;
+	/* remove I2C client for demodulator */
+	client_demod = port->i2c_client_demod;
+	if (client_demod) {
+		module_put(client_demod->dev.driver->owner);
+		i2c_unregister_device(client_demod);
+		port->i2c_client_demod = NULL;
+	}
 
-frontend_detach:
 	port->gate_ctrl = NULL;
-	videobuf_dvb_dealloc_frontends(&port->frontends);
+	vb2_dvb_dealloc_frontends(&port->frontends);
 	return -EINVAL;
 }
 
 int cx23885_dvb_register(struct cx23885_tsport *port)
 {
 
-	struct videobuf_dvb_frontend *fe0;
+	struct vb2_dvb_frontend *fe0;
 	struct cx23885_dev *dev = port->dev;
 	int err, i;
 
@@ -1386,15 +2361,17 @@
 		port->num_frontends);
 
 	for (i = 1; i <= port->num_frontends; i++) {
-		if (videobuf_dvb_alloc_frontend(
+		struct vb2_queue *q;
+
+		if (vb2_dvb_alloc_frontend(
 			&port->frontends, i) == NULL) {
 			printk(KERN_ERR "%s() failed to alloc\n", __func__);
 			return -ENOMEM;
 		}
 
-		fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
+		fe0 = vb2_dvb_get_frontend(&port->frontends, i);
 		if (!fe0)
-			err = -EINVAL;
+			return -EINVAL;
 
 		dprintk(1, "%s\n", __func__);
 		dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
@@ -1408,10 +2385,21 @@
 		/* dvb stuff */
 		/* We have to init the queue for each frontend on a port. */
 		printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
-		videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
-			    &dev->pci->dev, &port->slock,
-			    V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
-			    sizeof(struct cx23885_buffer), port, NULL);
+		q = &fe0->dvb.dvbq;
+		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+		q->gfp_flags = GFP_DMA32;
+		q->min_buffers_needed = 2;
+		q->drv_priv = port;
+		q->buf_struct_size = sizeof(struct cx23885_buffer);
+		q->ops = &dvb_qops;
+		q->mem_ops = &vb2_dma_sg_memops;
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->lock = &dev->lock;
+
+		err = vb2_queue_init(q);
+		if (err < 0)
+			return err;
 	}
 	err = dvb_register(port);
 	if (err != 0)
@@ -1423,18 +2411,41 @@
 
 int cx23885_dvb_unregister(struct cx23885_tsport *port)
 {
-	struct videobuf_dvb_frontend *fe0;
+	struct vb2_dvb_frontend *fe0;
+	struct i2c_client *client;
+
+	/* remove I2C client for CI */
+	client = port->i2c_client_ci;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for SEC */
+	client = port->i2c_client_sec;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for tuner */
+	client = port->i2c_client_tuner;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for demodulator */
+	client = port->i2c_client_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);
 
-	/* FIXME: in an error condition where the we have
-	 * an expected number of frontends (attach problem)
-	 * then this might not clean up correctly, if 1
-	 * is invalid.
-	 * This comment only applies to future boards IF they
-	 * implement MFE support.
-	 */
-	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
 	if (fe0 && fe0->dvb.frontend)
-		videobuf_dvb_unregister_bus(&port->frontends);
+		vb2_dvb_unregister_bus(&port->frontends);
 
 	switch (port->dev->board) {
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
@@ -1449,4 +2460,3 @@
 
 	return 0;
 }
-