--- zzzz-none-000/linux-3.10.107/drivers/media/pci/cx88/cx88-vbi.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/media/pci/cx88/cx88-vbi.c 2021-02-04 17:41:59.000000000 +0000 @@ -6,10 +6,6 @@ #include "cx88.h" -static unsigned int vbibufs = 4; -module_param(vbibufs,int,0644); -MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32"); - static unsigned int vbi_debug; module_param(vbi_debug,int,0644); MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); @@ -22,26 +18,27 @@ int cx8800_vbi_fmt (struct file *file, void *priv, struct v4l2_format *f) { - struct cx8800_fh *fh = priv; - struct cx8800_dev *dev = fh->dev; + struct cx8800_dev *dev = video_drvdata(file); f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; f->fmt.vbi.offset = 244; - f->fmt.vbi.count[0] = VBI_LINE_COUNT; - f->fmt.vbi.count[1] = VBI_LINE_COUNT; if (dev->core->tvnorm & V4L2_STD_525_60) { /* ntsc */ f->fmt.vbi.sampling_rate = 28636363; f->fmt.vbi.start[0] = 10; f->fmt.vbi.start[1] = 273; + f->fmt.vbi.count[0] = VBI_LINE_NTSC_COUNT; + f->fmt.vbi.count[1] = VBI_LINE_NTSC_COUNT; } else if (dev->core->tvnorm & V4L2_STD_625_50) { /* pal */ f->fmt.vbi.sampling_rate = 35468950; - f->fmt.vbi.start[0] = 7 -1; - f->fmt.vbi.start[1] = 319 -1; + f->fmt.vbi.start[0] = V4L2_VBI_ITU_625_F1_START + 5; + f->fmt.vbi.start[1] = V4L2_VBI_ITU_625_F2_START + 5; + f->fmt.vbi.count[0] = VBI_LINE_PAL_COUNT; + f->fmt.vbi.count[1] = VBI_LINE_PAL_COUNT; } return 0; } @@ -54,7 +51,7 @@ /* setup fifo + format */ cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24], - buf->vb.width, buf->risc.dma); + VBI_LINE_LENGTH, buf->risc.dma); cx_write(MO_VBOS_CONTROL, ( (1 << 18) | // comb filter delay fixup (1 << 15) | // enable vbi capture @@ -62,7 +59,7 @@ /* reset counter */ cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET); - q->count = 1; + q->count = 0; /* enable irqs */ cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT); @@ -78,7 +75,7 @@ return 0; } -int cx8800_stop_vbi_dma(struct cx8800_dev *dev) +void cx8800_stop_vbi_dma(struct cx8800_dev *dev) { struct cx88_core *core = dev->core; @@ -91,7 +88,6 @@ /* disable irqs */ cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT); cx_clear(MO_VID_INTMSK, 0x0f0088); - return 0; } int cx8800_restart_vbi_queue(struct cx8800_dev *dev, @@ -102,144 +98,136 @@ if (list_empty(&q->active)) return 0; - buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + buf = list_entry(q->active.next, struct cx88_buffer, list); dprintk(2,"restart_queue [%p/%d]: restart dma\n", - buf, buf->vb.i); + buf, buf->vb.vb2_buf.index); cx8800_start_vbi_dma(dev, q, buf); - list_for_each_entry(buf, &q->active, vb.queue) - buf->count = q->count++; - mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); return 0; } -void cx8800_vbi_timeout(unsigned long data) -{ - struct cx8800_dev *dev = (struct cx8800_dev*)data; - struct cx88_core *core = dev->core; - struct cx88_dmaqueue *q = &dev->vbiq; - struct cx88_buffer *buf; - unsigned long flags; - - cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH24]); - - cx_clear(MO_VID_DMACNTRL, 0x88); - cx_clear(VID_CAPTURE_CONTROL, 0x18); - - spin_lock_irqsave(&dev->slock,flags); - while (!list_empty(&q->active)) { - buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); - list_del(&buf->vb.queue); - buf->vb.state = VIDEOBUF_ERROR; - wake_up(&buf->vb.done); - printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->core->name, - buf, buf->vb.i, (unsigned long)buf->risc.dma); - } - cx8800_restart_vbi_queue(dev,q); - spin_unlock_irqrestore(&dev->slock,flags); -} - /* ------------------------------------------------------------------ */ -static int -vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +static int queue_setup(struct vb2_queue *q, const void *parg, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]) { - *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; - if (0 == *count) - *count = vbibufs; - if (*count < 2) - *count = 2; - if (*count > 32) - *count = 32; + struct cx8800_dev *dev = q->drv_priv; + + *num_planes = 1; + if (dev->core->tvnorm & V4L2_STD_525_60) + sizes[0] = VBI_LINE_NTSC_COUNT * VBI_LINE_LENGTH * 2; + else + sizes[0] = VBI_LINE_PAL_COUNT * VBI_LINE_LENGTH * 2; + alloc_ctxs[0] = dev->alloc_ctx; return 0; } -static int -vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct cx8800_fh *fh = q->priv_data; - struct cx8800_dev *dev = fh->dev; - struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct cx8800_dev *dev = vb->vb2_queue->drv_priv; + struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); + struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0); + unsigned int lines; unsigned int size; - int rc; - size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; - if (0 != buf->vb.baddr && buf->vb.bsize < size) + if (dev->core->tvnorm & V4L2_STD_525_60) + lines = VBI_LINE_NTSC_COUNT; + else + lines = VBI_LINE_PAL_COUNT; + size = lines * VBI_LINE_LENGTH * 2; + if (vb2_plane_size(vb, 0) < size) return -EINVAL; + vb2_set_plane_payload(vb, 0, size); - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); - buf->vb.width = VBI_LINE_LENGTH; - buf->vb.height = VBI_LINE_COUNT; - buf->vb.size = size; - buf->vb.field = V4L2_FIELD_SEQ_TB; - - if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) - goto fail; - cx88_risc_buffer(dev->pci, &buf->risc, - dma->sglist, - 0, buf->vb.width * buf->vb.height, - buf->vb.width, 0, - buf->vb.height); - } - buf->vb.state = VIDEOBUF_PREPARED; + cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl, + 0, VBI_LINE_LENGTH * lines, + VBI_LINE_LENGTH, 0, + lines); return 0; +} + +static void buffer_finish(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct cx8800_dev *dev = vb->vb2_queue->drv_priv; + struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); + struct cx88_riscmem *risc = &buf->risc; - fail: - cx88_free_buffer(q,buf); - return rc; + if (risc->cpu) + pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma); + memset(risc, 0, sizeof(*risc)); } -static void -vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +static void buffer_queue(struct vb2_buffer *vb) { - struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct cx8800_dev *dev = vb->vb2_queue->drv_priv; + struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); struct cx88_buffer *prev; - struct cx8800_fh *fh = vq->priv_data; - struct cx8800_dev *dev = fh->dev; struct cx88_dmaqueue *q = &dev->vbiq; - /* add jump to stopper */ - buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); - buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + /* add jump to start */ + buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8); + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8); if (list_empty(&q->active)) { - list_add_tail(&buf->vb.queue,&q->active); + list_add_tail(&buf->list, &q->active); cx8800_start_vbi_dma(dev, q, buf); - buf->vb.state = VIDEOBUF_ACTIVE; - buf->count = q->count++; - mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); dprintk(2,"[%p/%d] vbi_queue - first active\n", - buf, buf->vb.i); + buf, buf->vb.vb2_buf.index); } else { - prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue); - list_add_tail(&buf->vb.queue,&q->active); - buf->vb.state = VIDEOBUF_ACTIVE; - buf->count = q->count++; + buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1); + prev = list_entry(q->active.prev, struct cx88_buffer, list); + list_add_tail(&buf->list, &q->active); prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); dprintk(2,"[%p/%d] buffer_queue - append to active\n", - buf, buf->vb.i); + buf, buf->vb.vb2_buf.index); } } -static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +static int start_streaming(struct vb2_queue *q, unsigned int count) { - struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); + struct cx8800_dev *dev = q->drv_priv; + struct cx88_dmaqueue *dmaq = &dev->vbiq; + struct cx88_buffer *buf = list_entry(dmaq->active.next, + struct cx88_buffer, list); - cx88_free_buffer(q,buf); + cx8800_start_vbi_dma(dev, dmaq, buf); + return 0; } -const struct videobuf_queue_ops cx8800_vbi_qops = { - .buf_setup = vbi_setup, - .buf_prepare = vbi_prepare, - .buf_queue = vbi_queue, - .buf_release = vbi_release, -}; +static void stop_streaming(struct vb2_queue *q) +{ + struct cx8800_dev *dev = q->drv_priv; + struct cx88_core *core = dev->core; + struct cx88_dmaqueue *dmaq = &dev->vbiq; + unsigned long flags; -/* ------------------------------------------------------------------ */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ + cx_clear(MO_VID_DMACNTRL, 0x11); + cx_clear(VID_CAPTURE_CONTROL, 0x06); + cx8800_stop_vbi_dma(dev); + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&dmaq->active)) { + struct cx88_buffer *buf = list_entry(dmaq->active.next, + struct cx88_buffer, list); + + list_del(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&dev->slock, flags); +} + +const struct vb2_ops cx8800_vbi_qops = { + .queue_setup = queue_setup, + .buf_prepare = buffer_prepare, + .buf_finish = buffer_finish, + .buf_queue = buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +};