--- zzzz-none-000/linux-3.10.107/drivers/media/pci/saa7146/mxb.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/media/pci/saa7146/mxb.c	2021-02-04 17:41:59.000000000 +0000
@@ -151,8 +151,8 @@
 
 struct mxb
 {
-	struct video_device	*video_dev;
-	struct video_device	*vbi_dev;
+	struct video_device	video_dev;
+	struct video_device	vbi_dev;
 
 	struct i2c_adapter	i2c_adapter;
 
@@ -357,7 +357,7 @@
 	tea6420_route(mxb, 6);
 
 	/* select video mode in saa7111a */
-	saa7111a_call(mxb, core, s_std, std);
+	saa7111a_call(mxb, video, s_std, std);
 
 	/* select tuner-output on saa7111a */
 	i = 0;
@@ -379,8 +379,8 @@
 	/* These two gpio calls set the GPIO pins that control the tda9820 */
 	saa7146_write(dev, GPIO_CTRL, 0x00404050);
 	saa7111a_call(mxb, core, s_gpio, 1);
-	saa7111a_call(mxb, core, s_std, std);
-	tuner_call(mxb, core, s_std, std);
+	saa7111a_call(mxb, video, s_std, std);
+	tuner_call(mxb, video, s_std, std);
 
 	/* switch to tuner-channel on tea6415c */
 	tea6415c_call(mxb, video, s_routing, 3, 17, 0);
@@ -669,14 +669,10 @@
 {
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
 
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (v4l2_chip_match_host(&reg->match)) {
-		reg->val = saa7146_read(dev, reg->reg);
-		reg->size = 4;
-		return 0;
-	}
-	call_all(dev, core, g_register, reg);
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	reg->val = saa7146_read(dev, reg->reg);
+	reg->size = 4;
 	return 0;
 }
 
@@ -684,13 +680,10 @@
 {
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
 
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (v4l2_chip_match_host(&reg->match)) {
-		saa7146_write(dev, reg->reg, reg->val);
-		return 0;
-	}
-	return call_all(dev, core, s_register, reg);
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	saa7146_write(dev, reg->reg, reg->val);
+	return 0;
 }
 #endif
 
@@ -778,9 +771,9 @@
 		/* These two gpio calls set the GPIO pins that control the tda9820 */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		saa7111a_call(mxb, core, s_gpio, 0);
-		saa7111a_call(mxb, core, s_std, std);
+		saa7111a_call(mxb, video, s_std, std);
 		if (mxb->cur_input == 0)
-			tuner_call(mxb, core, s_std, std);
+			tuner_call(mxb, video, s_std, std);
 	} else {
 		v4l2_std_id std = V4L2_STD_PAL_BG;
 
@@ -790,9 +783,9 @@
 		/* These two gpio calls set the GPIO pins that control the tda9820 */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		saa7111a_call(mxb, core, s_gpio, 1);
-		saa7111a_call(mxb, core, s_std, std);
+		saa7111a_call(mxb, video, s_std, std);
 		if (mxb->cur_input == 0)
-			tuner_call(mxb, core, s_std, std);
+			tuner_call(mxb, video, s_std, std);
 	}
 	return 0;
 }