--- zzzz-none-000/linux-3.10.107/drivers/media/rc/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/media/rc/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -84,27 +84,24 @@
 	   Enable this option if you have an infrared remote control which
 	   uses the Sony protocol, and you need software decoding support.
 
-config IR_RC5_SZ_DECODER
-	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
+config IR_SANYO_DECODER
+	tristate "Enable IR raw decoder for the Sanyo protocol"
 	depends on RC_CORE
-	select BITREVERSE
 	default y
 
 	---help---
-	   Enable this option if you have IR with RC-5 (streamzap) protocol,
-	   and if the IR is decoded in software. (The Streamzap PC Remote
-	   uses an IR protocol that is almost standard RC-5, but not quite,
-	   as it uses an additional bit).
+	   Enable this option if you have an infrared remote control which
+	   uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
+	   and you need software decoding support.
 
-config IR_SANYO_DECODER
-	tristate "Enable IR raw decoder for the Sanyo protocol"
+config IR_SHARP_DECODER
+	tristate "Enable IR raw decoder for the Sharp protocol"
 	depends on RC_CORE
 	default y
 
 	---help---
 	   Enable this option if you have an infrared remote control which
-	   uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
-	   and you need software decoding support.
+	   uses the Sharp protocol, and you need software decoding support.
 
 config IR_MCE_KBD_DECODER
 	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
@@ -116,6 +113,16 @@
 	   Enable this option if you have a Microsoft Remote Keyboard for
 	   Windows Media Center Edition, which you would like to use with
 	   a raw IR receiver in your system.
+
+config IR_XMP_DECODER
+	tristate "Enable IR raw decoder for the XMP protocol"
+	depends on RC_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have IR with XMP protocol, and
+	   if the IR is decoded in software
 endif #RC_DECODERS
 
 menuconfig RC_DEVICES
@@ -157,6 +164,16 @@
 	   To compile this driver as a module, choose M here: the
 	   module will be called ene_ir.
 
+config IR_HIX5HD2
+	tristate "Hisilicon hix5hd2 IR remote control"
+	depends on RC_CORE
+	help
+	 Say Y here if you want to use hisilicon hix5hd2 remote control.
+	 To compile this driver as a module, choose M here: the module will be
+	 called ir-hix5hd2.
+
+	 If you're not sure, select N here
+
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
@@ -206,6 +223,17 @@
 	   To compile this driver as a module, choose M here: the
 	   module will be called fintek-cir.
 
+config IR_MESON
+	tristate "Amlogic Meson IR remote receiver"
+	depends on RC_CORE
+	depends on ARCH_MESON || COMPILE_TEST
+	---help---
+	   Say Y if you want to use the IR remote receiver available
+	   on Amlogic Meson SoCs.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called meson-ir.
+
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
@@ -223,6 +251,8 @@
 	tristate "RedRat3 IR Transceiver"
 	depends on USB_ARCH_HAS_HCD
 	depends on RC_CORE
+	select NEW_LEDS
+	select LEDS_CLASS
 	select USB
 	---help---
 	   Say Y here if you want to use a RedRat3 Infrared Transceiver.
@@ -248,7 +278,6 @@
 	depends on RC_CORE
 	select NEW_LEDS
 	select LEDS_CLASS
-	select LEDS_TRIGGERS
 	select BITREVERSE
 	---help---
 	   Say Y here if you want to use the IR remote functionality found
@@ -259,6 +288,21 @@
 	   To compile this driver as a module, choose M here: the module will
 	   be called winbond_cir.
 
+config IR_IGORPLUGUSB
+	tristate "IgorPlug-USB IR Receiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on RC_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use the IgorPlug-USB IR Receiver by
+	   Igor Cesko. This device is included on the Fit-PC2.
+
+	   Note that this device can only record bursts of 36 IR pulses and
+	   spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called igorplugusb.
+
 config IR_IGUANA
 	tristate "IguanaWorks USB IR Transceiver"
 	depends on USB_ARCH_HAS_HCD
@@ -299,6 +343,8 @@
 	   The driver uses omap DM timers for generating the carrier
 	   wave and pulses.
 
+source "drivers/media/rc/img-ir/Kconfig"
+
 config RC_LOOPBACK
 	tristate "Remote Control Loopback Driver"
 	depends on RC_CORE
@@ -321,4 +367,25 @@
 	   To compile this driver as a module, choose M here: the module will
 	   be called gpio-ir-recv.
 
+config RC_ST
+	tristate "ST remote control receiver"
+	depends on RC_CORE
+	depends on ARCH_STI || COMPILE_TEST
+	---help---
+	   Say Y here if you want support for ST remote control driver
+	   which allows both IR and UHF RX.
+	   The driver passes raw pulse and space information to the LIRC decoder.
+
+	   If you're not sure, select N here.
+
+config IR_SUNXI
+	tristate "SUNXI IR remote control"
+	depends on RC_CORE
+	depends on ARCH_SUNXI || COMPILE_TEST
+	---help---
+	   Say Y if you want to use sunXi internal IR Controller
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called sunxi-ir.
+
 endif #RC_DEVICES