--- zzzz-none-000/linux-3.10.107/drivers/mfd/ab8500-sysctrl.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/mfd/ab8500-sysctrl.c	2021-02-04 17:41:59.000000000 +0000
@@ -49,7 +49,9 @@
 		if (!psy)
 			continue;
 
-		ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+				&val);
+		power_supply_put(psy);
 
 		if (!ret && val.intval) {
 			charger_present = true;
@@ -63,8 +65,8 @@
 	/* Check if battery is known */
 	psy = power_supply_get_by_name("ab8500_btemp");
 	if (psy) {
-		ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY,
-					&val);
+		ret = power_supply_get_property(psy,
+				POWER_SUPPLY_PROP_TECHNOLOGY, &val);
 		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
 			printk(KERN_INFO
 			       "Charger \"%s\" is connected with known battery."
@@ -72,6 +74,7 @@
 			       pss[i]);
 			machine_restart("charging");
 		}
+		power_supply_put(psy);
 	}
 
 shutdown:
@@ -85,63 +88,6 @@
 	}
 }
 
-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
-	struct ab8500_platform_data *plat;
-	struct ab8500_sysctrl_platform_data *pdata;
-	u16 reason = 0;
-	u8 val;
-
-	if (sysctrl_dev == NULL) {
-		pr_err("%s: sysctrl not initialized\n", __func__);
-		return;
-	}
-
-	plat = dev_get_platdata(sysctrl_dev->parent);
-	pdata = plat->sysctrl;
-	if (pdata && pdata->reboot_reason_code)
-		reason = pdata->reboot_reason_code(cmd);
-	else
-		pr_warn("[%s] No reboot reason set. Default reason %d\n",
-			__func__, reason);
-
-	/*
-	 * Disable RTC alarm, just a precaution so that no alarm
-	 * is running when WD reset is executed.
-	 */
-	abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
-		RTC_CTRL , &val);
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
-	/*
-	 * Android is not using the RTC alarm registers during reboot
-	 * so we borrow them for writing the reason of reset
-	 */
-
-	/* reason[8 LSB] */
-	val = reason & 0xFF;
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		AB8500_ALARM_MIN_LOW , val);
-
-	/* reason[8 MSB] */
-	val = (reason>>8) & 0xFF;
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		AB8500_ALARM_MIN_MID , val);
-
-	/* Setting WD timeout to 0 */
-	ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
-	/* Setting the parameters to AB8500 WD*/
-	ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
-		AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -237,7 +183,6 @@
 static struct platform_driver ab8500_sysctrl_driver = {
 	.driver = {
 		.name = "ab8500-sysctrl",
-		.owner = THIS_MODULE,
 	},
 	.probe = ab8500_sysctrl_probe,
 	.remove = ab8500_sysctrl_remove,