--- zzzz-none-000/linux-3.10.107/drivers/mfd/db8500-prcmu.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/mfd/db8500-prcmu.c 2021-02-04 17:41:59.000000000 +0000 @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -465,7 +466,7 @@ #define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \ { (PRCM_##_name##_MGT), 0 , _branch, _clk38div} -struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { +static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(SGACLK, PLL_DIV, false), CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true), CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true), @@ -674,15 +675,6 @@ } /** - * prcmu_get_boot_status - PRCMU boot status checking - * Returns: the current PRCMU boot status - */ -int prcmu_get_boot_status(void) -{ - return readb(tcdm_base + PRCM_BOOT_STATUS); -} - -/** * prcmu_set_rc_a2p - This function is used to run few power state sequences * @val: Value to be set, i.e. transition requested * Returns: 0 on success, -EINVAL on invalid argument @@ -1724,27 +1716,26 @@ /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .index = ARM_EXTCLK,}, - { .frequency = 400000, .index = ARM_50_OPP,}, - { .frequency = 800000, .index = ARM_100_OPP,}, + { .frequency = 200000, .driver_data = ARM_EXTCLK,}, + { .frequency = 400000, .driver_data = ARM_50_OPP,}, + { .frequency = 800000, .driver_data = ARM_100_OPP,}, { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ { .frequency = CPUFREQ_TABLE_END,}, }; static long round_armss_rate(unsigned long rate) { + struct cpufreq_frequency_table *pos; long freq = 0; - int i = 0; /* cpufreq table frequencies is in KHz. */ rate = rate / 1000; /* Find the corresponding arm opp from the cpufreq table. */ - while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) { - freq = db8500_cpufreq_table[i].frequency; + cpufreq_for_each_entry(pos, db8500_cpufreq_table) { + freq = pos->frequency; if (freq == rate) break; - i++; } /* Return the last valid value, even if a match was not found. */ @@ -1885,23 +1876,21 @@ static int set_armss_rate(unsigned long rate) { - int i = 0; + struct cpufreq_frequency_table *pos; /* cpufreq table frequencies is in KHz. */ rate = rate / 1000; /* Find the corresponding arm opp from the cpufreq table. */ - while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) { - if (db8500_cpufreq_table[i].frequency == rate) + cpufreq_for_each_entry(pos, db8500_cpufreq_table) + if (pos->frequency == rate) break; - i++; - } - if (db8500_cpufreq_table[i].frequency != rate) + if (pos->frequency != rate) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); + return db8500_prcmu_set_arm_opp(pos->driver_data); } static int set_plldsi_rate(unsigned long rate) @@ -2302,9 +2291,6 @@ if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, msecs_to_jiffies(5000))) { -#if defined(CONFIG_DBX500_PRCMU_DEBUG) - db8500_prcmu_debug_dump(__func__, true, true); -#endif pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n", __func__); ret = -EFAULT; @@ -2318,7 +2304,7 @@ /** * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem */ -void prcmu_ac_sleep_req() +void prcmu_ac_sleep_req(void) { u32 val; @@ -2668,26 +2654,21 @@ { irq_set_chip_and_handler(virq, &prcmu_irq_chip, handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); return 0; } -static struct irq_domain_ops db8500_irq_ops = { +static const struct irq_domain_ops db8500_irq_ops = { .map = db8500_irq_map, .xlate = irq_domain_xlate_twocell, }; -static int db8500_irq_init(struct device_node *np, int irq_base) +static int db8500_irq_init(struct device_node *np) { int i; - /* In the device tree case, just take some IRQs */ - if (np) - irq_base = 0; - db8500_irq_domain = irq_domain_add_simple( - np, NUM_PRCMU_WAKEUPS, irq_base, + np, NUM_PRCMU_WAKEUPS, 0, &db8500_irq_ops, NULL); if (!db8500_irq_domain) { @@ -3070,7 +3051,7 @@ .num_trips = 4, }; -static struct mfd_cell common_prcmu_devs[] = { +static const struct mfd_cell common_prcmu_devs[] = { { .name = "ux500_wdt", .platform_data = &db8500_wdt_pdata, @@ -3079,7 +3060,7 @@ }, }; -static struct mfd_cell db8500_prcmu_devs[] = { +static const struct mfd_cell db8500_prcmu_devs[] = { { .name = "db8500-prcmu-regulators", .of_compatible = "stericsson,db8500-prcmu-regulator", @@ -3093,6 +3074,10 @@ .pdata_size = sizeof(db8500_cpufreq_table), }, { + .name = "cpuidle-dbx500", + .of_compatible = "stericsson,cpuidle-dbx500", + }, + { .name = "db8500-thermal", .num_resources = ARRAY_SIZE(db8500_thsens_resources), .resources = db8500_thsens_resources, @@ -3105,16 +3090,16 @@ { if (prcmu_has_arm_maxopp()) { db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].index = ARM_MAX_OPP; + db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; } } static int db8500_prcmu_register_ab8500(struct device *parent, - struct ab8500_platform_data *pdata, - int irq) + struct ab8500_platform_data *pdata) { - struct resource ab8500_resource = DEFINE_RES_IRQ(irq); - struct mfd_cell ab8500_cell = { + struct device_node *np; + struct resource ab8500_resource; + const struct mfd_cell ab8500_cell = { .name = "ab8500-core", .of_compatible = "stericsson,ab8500", .id = AB8500_VERSION_AB8500, @@ -3124,6 +3109,20 @@ .num_resources = 1, }; + if (!parent->of_node) + return -ENODEV; + + /* Look up the device node, sneak the IRQ out of it */ + for_each_child_of_node(parent->of_node, np) { + if (of_device_is_compatible(np, ab8500_cell.of_compatible)) + break; + } + if (!np) { + dev_info(parent, "could not find AB8500 node in the device tree\n"); + return -ENODEV; + } + of_irq_to_resource_table(np, &ab8500_resource, 1); + return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL); } @@ -3141,23 +3140,28 @@ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu"); if (!res) { dev_err(&pdev->dev, "no prcmu memory region provided\n"); - return -ENOENT; + return -EINVAL; } prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!prcmu_base) { dev_err(&pdev->dev, "failed to ioremap prcmu register memory\n"); - return -ENOENT; + return -ENOMEM; } init_prcm_registers(); dbx500_fw_version_init(pdev, pdata->version_offset); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); - return -ENOENT; + return -EINVAL; } tcdm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!tcdm_base) { + dev_err(&pdev->dev, + "failed to ioremap prcmu-tcdm register memory\n"); + return -ENOMEM; + } /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); @@ -3165,18 +3169,17 @@ irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "no prcmu irq provided\n"); - return -ENOENT; + return irq; } err = request_threaded_irq(irq, prcmu_irq_handler, prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); if (err < 0) { pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); - err = -EBUSY; - goto no_irq_return; + return err; } - db8500_irq_init(np, pdata->irq_base); + db8500_irq_init(np); prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); @@ -3197,21 +3200,18 @@ if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add subdevices\n"); - goto no_irq_return; + return err; } } - err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata, - pdata->ab_irq); + err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata); if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add ab8500 subdevice\n"); - goto no_irq_return; + return err; } pr_info("DB8500 PRCMU initialized\n"); - -no_irq_return: return err; } static const struct of_device_id db8500_prcmu_match[] = { @@ -3222,7 +3222,6 @@ static struct platform_driver db8500_prcmu_driver = { .driver = { .name = "db8500-prcmu", - .owner = THIS_MODULE, .of_match_table = db8500_prcmu_match, }, .probe = db8500_prcmu_probe,