--- zzzz-none-000/linux-3.10.107/drivers/misc/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/misc/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -51,15 +51,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad525x_dpot-spi.
 
-config ATMEL_PWM
-	tristate "Atmel AT32/AT91 PWM support"
-	depends on HAVE_CLK
-	help
-	  This option enables device driver support for the PWM channels
-	  on certain Atmel processors.  Pulse Width Modulation is used for
-	  purposes including software controlled power-efficient backlights
-	  on LCD displays, motor control, and waveform generation.
-
 config ATMEL_TCLIB
 	bool "Atmel AT32/AT91 Timer/Counter Library"
 	depends on (AVR32 || ARCH_AT91)
@@ -84,7 +75,7 @@
 config ATMEL_TCB_CLKSRC_BLOCK
 	int
 	depends on ATMEL_TCB_CLKSRC
-	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+	prompt "TC Block" if CPU_AT32AP700X
 	default 0
 	range 0 1
 	help
@@ -135,7 +126,7 @@
 
 config INTEL_MID_PTI
 	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
-	depends on PCI && TTY
+	depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)
 	default n
 	help
 	  The PTI (Parallel Trace Interface) driver directs
@@ -200,7 +191,7 @@
 
 config ATMEL_SSC
 	tristate "Device driver for Atmel SSC peripheral"
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST)
 	---help---
 	  This option enables device driver support for Atmel Synchronized
 	  Serial Communication peripheral (SSC).
@@ -235,7 +226,7 @@
 
 config CS5535_MFGPT
 	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
-	depends on PCI && X86 && MFD_CS5535
+	depends on MFD_CS5535
 	default n
 	help
 	  This driver provides access to MFGPT functionality for other
@@ -280,6 +271,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called hpilo.
 
+config QCOM_COINCELL
+	tristate "Qualcomm coincell charger support"
+	depends on MFD_SPMI_PMIC || COMPILE_TEST
+	help
+	  This driver supports the coincell block found inside of
+	  Qualcomm PMICs.  The coincell charger provides a means to
+	  charge a coincell battery or backup capacitor which is used
+	  to maintain PMIC register and RTC state in the absence of
+	  external power.
+
 config SGI_GRU
 	tristate "SGI GRU driver"
 	depends on X86_UV && SMP
@@ -300,8 +301,8 @@
 	depends on SGI_GRU
 	default n
 	---help---
-	This option enables addition debugging code for the SGI GRU driver. If
-	you are unsure, say N.
+	This option enables additional debugging code for the SGI GRU driver.
+	If you are unsure, say N.
 
 config APDS9802ALS
 	tristate "Medfield Avago APDS9802 ALS Sensor module"
@@ -381,19 +382,6 @@
 	  This driver provides support for the Honeywell HMC6352 compass,
 	  providing configuration and heading data via sysfs.
 
-config EP93XX_PWM
-	tristate "EP93xx PWM support"
-	depends on ARCH_EP93XX
-	help
-	  This option enables device driver support for the PWM channels
-	  on the Cirrus EP93xx processors.  The EP9307 chip only has one
-	  PWM channel all the others have two, the second channel is an
-	  alternate function of the EGPIO14 pin.  A sysfs interface is
-	  provided to control the PWM channels.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called ep93xx_pwm.
-
 config DS1682
 	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
 	depends on I2C
@@ -426,7 +414,7 @@
 
 config VMWARE_BALLOON
 	tristate "VMware Balloon Driver"
-	depends on X86 && HYPERVISOR_GUEST
+	depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
 	help
 	  This is VMware physical memory management driver which acts
 	  like a "balloon" that can be inflated to reclaim physical pages
@@ -480,7 +468,8 @@
 
 config PCH_PHUB
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
-	depends on PCI
+	select GENERIC_NET_UTILS
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
 	  Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
@@ -527,13 +516,49 @@
 	  the genalloc API. It is supposed to be used for small on-chip SRAM
 	  areas found on many SoCs.
 
+config VEXPRESS_SYSCFG
+	bool "Versatile Express System Configuration driver"
+	depends on VEXPRESS_CONFIG
+	default y
+	help
+	  ARM Ltd. Versatile Express uses specialised platform configuration
+	  bus. System Configuration interface is one of the possible means
+	  of generating transactions on this bus.
+
+config FW_AUTH
+	bool "Authentication Support for RSA signed binaries"
+	depends on ASYMMETRIC_KEY_TYPE
+	default n
+	---help---
+	  This driver provides API to authenticate binaries signed using
+	  RSA PKCS signature scheme with public key embedded in X.509 certificate.
+
+config FW_AUTH_TEST
+	tristate "Test module for FW authentication API"
+	depends on FW_AUTH
+	default m
+	---help---
+	  This kernel module provides an interface through sysfs to test
+	  the firmware authentication API defined under FW_AUTH config.
+
+config QSEECOM
+	tristate "QSEECOM Client Driver"
+	default m
+	---help---
+	  This is client test driver that demonstrates a communication interface
+	  between userspace and Qualcomm Secure Execution Environment (QSEE)
+	  using Secure Channel Manager (SCM) interface.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
-source "drivers/misc/carma/Kconfig"
 source "drivers/misc/altera-stapl/Kconfig"
 source "drivers/misc/mei/Kconfig"
 source "drivers/misc/vmw_vmci/Kconfig"
+source "drivers/misc/mic/Kconfig"
+source "drivers/misc/genwqe/Kconfig"
+source "drivers/misc/echo/Kconfig"
+source "drivers/misc/cxl/Kconfig"
 endmenu