--- zzzz-none-000/linux-3.10.107/drivers/mtd/chips/cfi_util.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/mtd/chips/cfi_util.c 2021-02-04 17:41:59.000000000 +0000 @@ -23,6 +23,194 @@ #include #include +void cfi_udelay(int us) +{ + if (us >= 1000) { + msleep((us+999)/1000); + } else { + udelay(us); + cond_resched(); + } +} +EXPORT_SYMBOL(cfi_udelay); + +/* + * Returns the command address according to the given geometry. + */ +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) +{ + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatibility mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; +} +EXPORT_SYMBOL(cfi_build_cmd_addr); + +/* + * Transforms the CFI command for the given geometry (bus width & interleave). + * It looks too long to be inline, but in the common case it should almost all + * get optimised away. + */ +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) +{ + map_word val = { {0} }; + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onecmd; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + /* First, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + default: BUG(); + case 1: + onecmd = cmd; + break; + case 2: + onecmd = cpu_to_cfi16(map, cmd); + break; + case 4: + onecmd = cpu_to_cfi32(map, cmd); + break; + } + + /* Now replicate it across the size of an unsigned long, or + just to the bus width as appropriate */ + switch (chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + onecmd |= (onecmd << (chip_mode * 32)); +#endif + case 4: + onecmd |= (onecmd << (chip_mode * 16)); + case 2: + onecmd |= (onecmd << (chip_mode * 8)); + case 1: + ; + } + + /* And finally, for the multi-word case, replicate it + in all words in the structure */ + for (i=0; i < words_per_bus; i++) { + val.x[i] = onecmd; + } + + return val; +} +EXPORT_SYMBOL(cfi_build_cmd); + +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi) +{ + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onestat, res = 0; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + onestat = val.x[0]; + /* Or all status words together */ + for (i=1; i < words_per_bus; i++) { + onestat |= val.x[i]; + } + + res = onestat; + switch(chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + res |= (onestat >> (chip_mode * 32)); +#endif + case 4: + res |= (onestat >> (chip_mode * 16)); + case 2: + res |= (onestat >> (chip_mode * 8)); + case 1: + ; + } + + /* Last, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + case 1: + break; + case 2: + res = cfi16_to_cpu(map, res); + break; + case 4: + res = cfi32_to_cpu(map, res); + break; + default: BUG(); + } + return res; +} +EXPORT_SYMBOL(cfi_merge_status); + +/* + * Sends a CFI command to a bank of flash for the given geometry. + * + * Returns the offset in flash where the command was written. + * If prev_val is non-null, it will be set to the value at the command address, + * before the command was written. + */ +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, + struct map_info *map, struct cfi_private *cfi, + int type, map_word *prev_val) +{ + map_word val; + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); + val = cfi_build_cmd(cmd, map, cfi); + + if (prev_val) + *prev_val = map_read(map, addr); + + map_write(map, val, addr); + + return addr - base; +} +EXPORT_SYMBOL(cfi_send_gen_cmd); + int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi) { @@ -116,10 +304,8 @@ printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); extp = kmalloc(size, GFP_KERNEL); - if (!extp) { - printk(KERN_ERR "Failed to allocate memory\n"); + if (!extp) goto out; - } #ifdef CONFIG_MTD_XIP local_irq_disable(); @@ -241,7 +427,7 @@ chipnum++; if (chipnum >= cfi->numchips) - break; + break; } }