--- zzzz-none-000/linux-3.10.107/drivers/net/arcnet/rfc1051.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/arcnet/rfc1051.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -23,6 +23,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -30,10 +33,8 @@ #include #include #include -#include - -#define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n" +#include "arcdevice.h" static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); static void rx(struct net_device *dev, int bufnum, @@ -43,9 +44,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum); - -static struct ArcProto rfc1051_proto = -{ +static struct ArcProto rfc1051_proto = { .suffix = 's', .mtu = XMTU - RFC1051_HDR_SIZE, .is_ip = 1, @@ -56,10 +55,9 @@ .ack_tx = NULL }; - static int __init arcnet_rfc1051_init(void) { - printk(VERSION); + pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded"); arc_proto_map[ARC_P_IP_RFC1051] = arc_proto_map[ARC_P_ARP_RFC1051] @@ -82,14 +80,13 @@ MODULE_LICENSE("GPL"); -/* - * Determine a packet's protocol ID. - * +/* Determine a packet's protocol ID. + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1051 *soft = &pkt->soft.rfc1051; int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; @@ -97,9 +94,9 @@ skb_reset_mac_header(skb); skb_pull(skb, hdr_size); - if (pkt->hard.dest == 0) + if (pkt->hard.dest == 0) { skb->pkt_type = PACKET_BROADCAST; - else if (dev->flags & IFF_PROMISC) { + } else if (dev->flags & IFF_PROMISC) { /* if we're not sending to ourselves :) */ if (pkt->hard.dest != dev->dev_addr[0]) skb->pkt_type = PACKET_OTHERHOST; @@ -120,7 +117,6 @@ return htons(ETH_P_IP); } - /* packet receiver */ static void rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) @@ -130,7 +126,7 @@ struct archdr *pkt = pkthdr; int ofs; - BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); if (length >= MinTU) ofs = 512 - length; @@ -138,15 +134,14 @@ ofs = 256 - length; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; /* up to sizeof(pkt->soft) has already been copied from the card */ memcpy(pkt, pkthdr, sizeof(struct archdr)); @@ -155,21 +150,19 @@ pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); } - -/* - * Create the ARCnet hard/soft headers for RFC1051. - */ +/* Create the ARCnet hard/soft headers for RFC1051 */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1051 *soft = &pkt->soft.rfc1051; /* set the protocol ID according to RFC1051 */ @@ -181,29 +174,26 @@ soft->proto = ARC_P_ARP_RFC1051; break; default: - BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n", - type, type); + arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n", + type, type); dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; return 0; } - - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. + /* FIXME: fill in the last byte of the dest ipaddr here to + * better comply with RFC1051 in "noarp" mode. */ pkt->hard.dest = 0; return hdr_size; @@ -214,7 +204,6 @@ return hdr_size; /* success */ } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -222,15 +211,16 @@ struct arc_hardware *hard = &pkt->hard; int ofs; - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; if (length > XMTU) { /* should never happen! other people already check for this. */ - BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n", - length, XMTU); + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); length = XMTU; } if (length > MinTU) { @@ -239,8 +229,9 @@ } else if (length > MTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length - 3; - } else + } else { hard->offset[0] = ofs = 256 - length; + } lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);