--- zzzz-none-000/linux-3.10.107/drivers/net/arcnet/rfc1201.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/arcnet/rfc1201.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1201 (standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -23,17 +23,19 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include #include #include #include -#include -MODULE_LICENSE("GPL"); -#define VERSION "arcnet: RFC1201 \"standard\" (`a') encapsulation support loaded.\n" +#include "arcdevice.h" +MODULE_LICENSE("GPL"); static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); static void rx(struct net_device *dev, int bufnum, @@ -44,8 +46,7 @@ int bufnum); static int continue_tx(struct net_device *dev, int bufnum); -static struct ArcProto rfc1201_proto = -{ +static struct ArcProto rfc1201_proto = { .suffix = 'a', .mtu = 1500, /* could be more, but some receivers can't handle it... */ .is_ip = 1, /* This is for sending IP and ARP packages */ @@ -56,10 +57,9 @@ .ack_tx = NULL }; - static int __init arcnet_rfc1201_init(void) { - printk(VERSION); + pr_info("%s\n", "RFC1201 \"standard\" (`a') encapsulation support loaded"); arc_proto_map[ARC_P_IP] = arc_proto_map[ARC_P_IPV6] @@ -84,14 +84,13 @@ module_init(arcnet_rfc1201_init); module_exit(arcnet_rfc1201_exit); -/* - * Determine a packet's protocol ID. - * +/* Determine a packet's protocol ID. + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1201 *soft = &pkt->soft.rfc1201; int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; @@ -99,9 +98,9 @@ skb_reset_mac_header(skb); skb_pull(skb, hdr_size); - if (pkt->hard.dest == 0) + if (pkt->hard.dest == 0) { skb->pkt_type = PACKET_BROADCAST; - else if (dev->flags & IFF_PROMISC) { + } else if (dev->flags & IFF_PROMISC) { /* if we're not sending to ourselves :) */ if (pkt->hard.dest != dev->dev_addr[0]) skb->pkt_type = PACKET_OTHERHOST; @@ -129,7 +128,6 @@ return htons(ETH_P_IP); } - /* packet receiver */ static void rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) @@ -141,7 +139,8 @@ int saddr = pkt->hard.source, ofs; struct Incoming *in = &lp->rfc1201.incoming[saddr]; - BUGMSG(D_DURING, "it's an RFC1201 packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's an RFC1201 packet (length=%d)\n", + length); if (length >= MinTU) ofs = 512 - length; @@ -149,11 +148,11 @@ ofs = 256 - length; if (soft->split_flag == 0xFF) { /* Exception Packet */ - if (length >= 4 + RFC1201_HDR_SIZE) - BUGMSG(D_DURING, "compensating for exception packet\n"); - else { - BUGMSG(D_EXTRA, "short RFC1201 exception packet from %02Xh", - saddr); + if (length >= 4 + RFC1201_HDR_SIZE) { + arc_printk(D_DURING, dev, "compensating for exception packet\n"); + } else { + arc_printk(D_EXTRA, dev, "short RFC1201 exception packet from %02Xh", + saddr); return; } @@ -164,12 +163,13 @@ soft, sizeof(pkt->soft)); } if (!soft->split_flag) { /* not split */ - BUGMSG(D_RX, "incoming is not split (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_RX, dev, "incoming is not split (splitflag=%d)\n", + soft->split_flag); if (in->skb) { /* already assembling one! */ - BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, soft->sequence); + arc_printk(D_EXTRA, dev, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); lp->rfc1201.aborted_seq = soft->sequence; dev_kfree_skb_irq(in->skb); dev->stats.rx_errors++; @@ -179,82 +179,86 @@ in->sequence = soft->sequence; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; - /* up to sizeof(pkt->soft) has already been copied from the card */ + /* up to sizeof(pkt->soft) has already + * been copied from the card + */ memcpy(pkt, pkthdr, sizeof(struct archdr)); if (length > sizeof(pkt->soft)) - lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), - pkt->soft.raw + sizeof(pkt->soft), + lp->hw.copy_from_card(dev, bufnum, + ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - /* - * ARP packets have problems when sent from some DOS systems: the - * source address is always 0! So we take the hardware source addr - * (which is impossible to fumble) and insert it ourselves. + /* ARP packets have problems when sent from some DOS systems: + * the source address is always 0! + * So we take the hardware source addr (which is impossible + * to fumble) and insert it ourselves. */ if (soft->proto == ARC_P_ARP) { - struct arphdr *arp = (struct arphdr *) soft->payload; + struct arphdr *arp = (struct arphdr *)soft->payload; /* make sure addresses are the right length */ if (arp->ar_hln == 1 && arp->ar_pln == 4) { - uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr); + uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr); if (!*cptr) { /* is saddr = 00? */ - BUGMSG(D_EXTRA, - "ARP source address was 00h, set to %02Xh.\n", - saddr); + arc_printk(D_EXTRA, dev, + "ARP source address was 00h, set to %02Xh\n", + saddr); dev->stats.rx_crc_errors++; *cptr = saddr; } else { - BUGMSG(D_DURING, "ARP source address (%Xh) is fine.\n", - *cptr); + arc_printk(D_DURING, dev, "ARP source address (%Xh) is fine.\n", + *cptr); } } else { - BUGMSG(D_NORMAL, "funny-shaped ARP packet. (%Xh, %Xh)\n", - arp->ar_hln, arp->ar_pln); + arc_printk(D_NORMAL, dev, "funny-shaped ARP packet. (%Xh, %Xh)\n", + arp->ar_hln, arp->ar_pln); dev->stats.rx_errors++; dev->stats.rx_crc_errors++; } } - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); } else { /* split packet */ - /* - * NOTE: MSDOS ARP packet correction should only need to apply to - * unsplit packets, since ARP packets are so short. + /* NOTE: MSDOS ARP packet correction should only need to + * apply to unsplit packets, since ARP packets are so short. * - * My interpretation of the RFC1201 document is that if a packet is - * received out of order, the entire assembly process should be - * aborted. + * My interpretation of the RFC1201 document is that if a + * packet is received out of order, the entire assembly + * process should be aborted. * - * The RFC also mentions "it is possible for successfully received - * packets to be retransmitted." As of 0.40 all previously received - * packets are allowed, not just the most recent one. + * The RFC also mentions "it is possible for successfully + * received packets to be retransmitted." As of 0.40 all + * previously received packets are allowed, not just the + * most recent one. * - * We allow multiple assembly processes, one for each ARCnet card - * possible on the network. Seems rather like a waste of memory, - * but there's no other way to be reliable. + * We allow multiple assembly processes, one for each + * ARCnet card possible on the network. + * Seems rather like a waste of memory, but there's no + * other way to be reliable. */ - BUGMSG(D_RX, "packet is split (splitflag=%d, seq=%d)\n", - soft->split_flag, in->sequence); + arc_printk(D_RX, dev, "packet is split (splitflag=%d, seq=%d)\n", + soft->split_flag, in->sequence); if (in->skb && in->sequence != soft->sequence) { - BUGMSG(D_EXTRA, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n", - saddr, in->sequence, soft->sequence, - soft->split_flag); + arc_printk(D_EXTRA, dev, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n", + saddr, in->sequence, soft->sequence, + soft->split_flag); dev_kfree_skb_irq(in->skb); in->skb = NULL; dev->stats.rx_errors++; @@ -262,24 +266,23 @@ in->lastpacket = in->numpackets = 0; } if (soft->split_flag & 1) { /* first packet in split */ - BUGMSG(D_RX, "brand new splitpacket (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_RX, dev, "brand new splitpacket (splitflag=%d)\n", + soft->split_flag); if (in->skb) { /* already assembling one! */ - BUGMSG(D_EXTRA, "aborting previous (seq=%d) assembly " - "(splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, - soft->sequence); + arc_printk(D_EXTRA, dev, "aborting previous (seq=%d) assembly (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); dev->stats.rx_errors++; dev->stats.rx_missed_errors++; dev_kfree_skb_irq(in->skb); } in->sequence = soft->sequence; - in->numpackets = ((unsigned) soft->split_flag >> 1) + 2; + in->numpackets = ((unsigned)soft->split_flag >> 1) + 2; in->lastpacket = 1; if (in->numpackets > 16) { - BUGMSG(D_EXTRA, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_EXTRA, dev, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n", + soft->split_flag); lp->rfc1201.aborted_seq = soft->sequence; dev->stats.rx_errors++; dev->stats.rx_length_errors++; @@ -287,14 +290,14 @@ } in->skb = skb = alloc_skb(508 * in->numpackets + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "(split) memory squeeze, dropping packet.\n"); + if (!skb) { + arc_printk(D_NORMAL, dev, "(split) memory squeeze, dropping packet.\n"); lp->rfc1201.aborted_seq = soft->sequence; dev->stats.rx_dropped++; return; } skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE); @@ -302,37 +305,37 @@ soft->split_flag = 0; /* end result won't be split */ } else { /* not first packet */ - int packetnum = ((unsigned) soft->split_flag >> 1) + 1; + int packetnum = ((unsigned)soft->split_flag >> 1) + 1; - /* - * if we're not assembling, there's no point trying to + /* if we're not assembling, there's no point trying to * continue. */ if (!in->skb) { if (lp->rfc1201.aborted_seq != soft->sequence) { - BUGMSG(D_EXTRA, "can't continue split without starting " - "first! (splitflag=%d, seq=%d, aborted=%d)\n", - soft->split_flag, soft->sequence, - lp->rfc1201.aborted_seq); + arc_printk(D_EXTRA, dev, "can't continue split without starting first! (splitflag=%d, seq=%d, aborted=%d)\n", + soft->split_flag, + soft->sequence, + lp->rfc1201.aborted_seq); dev->stats.rx_errors++; dev->stats.rx_missed_errors++; } return; } in->lastpacket++; - if (packetnum != in->lastpacket) { /* not the right flag! */ + /* if not the right flag */ + if (packetnum != in->lastpacket) { /* harmless duplicate? ignore. */ if (packetnum <= in->lastpacket - 1) { - BUGMSG(D_EXTRA, "duplicate splitpacket ignored! (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_EXTRA, dev, "duplicate splitpacket ignored! (splitflag=%d)\n", + soft->split_flag); dev->stats.rx_errors++; dev->stats.rx_frame_errors++; return; } /* "bad" duplicate, kill reassembly */ - BUGMSG(D_EXTRA, "out-of-order splitpacket, reassembly " - "(seq=%d) aborted (splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, soft->sequence); + arc_printk(D_EXTRA, dev, "out-of-order splitpacket, reassembly (seq=%d) aborted (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); lp->rfc1201.aborted_seq = soft->sequence; dev_kfree_skb_irq(in->skb); in->skb = NULL; @@ -341,7 +344,7 @@ in->lastpacket = in->numpackets = 0; return; } - pkt = (struct archdr *) in->skb->data; + pkt = (struct archdr *)in->skb->data; soft = &pkt->soft.rfc1201; } @@ -357,11 +360,12 @@ in->skb = NULL; in->lastpacket = in->numpackets = 0; - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n", - skb->len, pkt->hard.source); - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n", - skb->len, pkt->hard.source); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (unsplit)\n", + skb->len, pkt->hard.source); + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (split)\n", + skb->len, pkt->hard.source); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); @@ -369,14 +373,13 @@ } } - /* Create the ARCnet hard/soft headers for RFC1201. */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { struct arcnet_local *lp = netdev_priv(dev); int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1201 *soft = &pkt->soft.rfc1201; /* set the protocol ID according to RFC1201 */ @@ -402,19 +405,18 @@ soft->proto = ARC_P_ATALK; break; default: - BUGMSG(D_NORMAL, "RFC1201: I don't understand protocol %d (%Xh)\n", - type, type); + arc_printk(D_NORMAL, dev, "RFC1201: I don't understand protocol %d (%Xh)\n", + type, type); dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; return 0; } - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; @@ -424,10 +426,10 @@ /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. For now, always broadcasting - * will probably at least get packets sent out :) + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. + * For now, always broadcasting will probably at least get + * packets sent out :) */ pkt->hard.dest = 0; return hdr_size; @@ -437,7 +439,6 @@ return hdr_size; } - static void load_pkt(struct net_device *dev, struct arc_hardware *hard, struct arc_rfc1201 *soft, int softlen, int bufnum) { @@ -461,8 +462,9 @@ hard->offset[1] = ofs - RFC1201_HDR_SIZE; lp->hw.copy_to_card(dev, bufnum, ofs - RFC1201_HDR_SIZE, &excsoft, RFC1201_HDR_SIZE); - } else + } else { hard->offset[0] = ofs = 256 - softlen; + } lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, soft, softlen); @@ -470,7 +472,6 @@ lp->lastload_dest = hard->dest; } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -478,11 +479,11 @@ const int maxsegsize = XMTU - RFC1201_HDR_SIZE; struct Outgoing *out; + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); - - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; pkt->soft.rfc1201.split_flag = 0; /* need to do a split packet? */ @@ -494,9 +495,9 @@ out->numsegs = (out->dataleft + maxsegsize - 1) / maxsegsize; out->segnum = 0; - BUGMSG(D_DURING, "rfc1201 prep_tx: ready for %d-segment split " - "(%d bytes, seq=%d)\n", out->numsegs, out->length, - pkt->soft.rfc1201.sequence); + arc_printk(D_DURING, dev, "rfc1201 prep_tx: ready for %d-segment split (%d bytes, seq=%d)\n", + out->numsegs, out->length, + pkt->soft.rfc1201.sequence); return 0; /* not done */ } @@ -506,7 +507,6 @@ return 1; /* done */ } - static int continue_tx(struct net_device *dev, int bufnum) { struct arcnet_local *lp = netdev_priv(dev); @@ -516,9 +516,9 @@ int maxsegsize = XMTU - RFC1201_HDR_SIZE; int seglen; - BUGMSG(D_DURING, - "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", - out->segnum, out->numsegs, soft->sequence); + arc_printk(D_DURING, dev, + "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", + out->segnum, out->numsegs, soft->sequence); /* the "new" soft header comes right before the data chunk */ newsoft = (struct arc_rfc1201 *)