--- zzzz-none-000/linux-3.10.107/drivers/net/bonding/bond_sysfs.c 2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/bonding/bond_sysfs.c 2021-02-04 17:41:59.000000000 +0000
@@ -12,8 +12,7 @@
* for more details.
*
* You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * with this program; if not, see .
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
@@ -41,13 +40,22 @@
#include
#include
-#include "bonding.h"
+#include
+#include "bond_l2da_ctrl.h"
+#include
#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_bond(cd) ((struct bonding *)(netdev_priv(to_net_dev(cd))))
-/*
- * "show" function for the bond_masters attribute.
+/* Used for internal use of bonding_show_l2da_table and
+ * bonding_show_l2da_table_clb
+*/
+struct bonding_show_l2da_table_clb_ctx {
+ char *buf; /* save the updated result data */
+ int res; /* save the updated result */
+};
+
+/* "show" function for the bond_masters attribute.
* The class parameter is ignored.
*/
static ssize_t bonding_show_bonds(struct class *cls,
@@ -89,14 +97,11 @@
return NULL;
}
-/*
- * "store" function for the bond_masters attribute. This is what
+/* "store" function for the bond_masters attribute. This is what
* creates and deletes entire bonds.
*
* The class parameter is ignored.
- *
*/
-
static ssize_t bonding_store_bonds(struct class *cls,
struct class_attribute *attr,
const char *buffer, size_t count)
@@ -118,9 +123,9 @@
rv = bond_create(bn->net, ifname);
if (rv) {
if (rv == -EEXIST)
- pr_info("%s already exists.\n", ifname);
+ pr_info("%s already exists\n", ifname);
else
- pr_info("%s creation failed.\n", ifname);
+ pr_info("%s creation failed\n", ifname);
res = rv;
}
} else if (command[0] == '-') {
@@ -145,18 +150,10 @@
return res;
err_no_cmd:
- pr_err("no command found in bonding_masters. Use +ifname or -ifname.\n");
+ pr_err("no command found in bonding_masters - use +ifname or -ifname\n");
return -EPERM;
}
-static const void *bonding_namespace(struct class *cls,
- const struct class_attribute *attr)
-{
- const struct bond_net *bn =
- container_of(attr, struct bond_net, class_attr_bonding_masters);
- return bn->net;
-}
-
/* class attribute for bond_masters file. This ends up in /sys/class/net */
static const struct class_attribute class_attr_bonding_masters = {
.attr = {
@@ -165,56 +162,40 @@
},
.show = bonding_show_bonds,
.store = bonding_store_bonds,
- .namespace = bonding_namespace,
};
-int bond_create_slave_symlinks(struct net_device *master,
- struct net_device *slave)
+/* Generic "store" method for bonding sysfs option setting */
+static ssize_t bonding_sysfs_store_option(struct device *d,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
{
- char linkname[IFNAMSIZ+7];
- int ret = 0;
-
- /* first, create a link from the slave back to the master */
- ret = sysfs_create_link(&(slave->dev.kobj), &(master->dev.kobj),
- "master");
- if (ret)
- return ret;
- /* next, create a link from the master to the slave */
- sprintf(linkname, "slave_%s", slave->name);
- ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
- linkname);
+ struct bonding *bond = to_bond(d);
+ const struct bond_option *opt;
+ int ret;
- /* free the master link created earlier in case of error */
- if (ret)
- sysfs_remove_link(&(slave->dev.kobj), "master");
+ opt = bond_opt_get_by_name(attr->attr.name);
+ if (WARN_ON(!opt))
+ return -ENOENT;
+ ret = bond_opt_tryset_rtnl(bond, opt->id, (char *)buffer);
+ if (!ret)
+ ret = count;
return ret;
-
}
-void bond_destroy_slave_symlinks(struct net_device *master,
- struct net_device *slave)
-{
- char linkname[IFNAMSIZ+7];
-
- sysfs_remove_link(&(slave->dev.kobj), "master");
- sprintf(linkname, "slave_%s", slave->name);
- sysfs_remove_link(&(master->dev.kobj), linkname);
-}
-
-
-/*
- * Show the slaves in the current bond.
- */
+/* Show the slaves in the current bond. */
static ssize_t bonding_show_slaves(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct slave *slave;
- int i, res = 0;
struct bonding *bond = to_bond(d);
+ struct list_head *iter;
+ struct slave *slave;
+ int res = 0;
+
+ if (!rtnl_trylock())
+ return restart_syscall();
- read_lock(&bond->lock);
- bond_for_each_slave(bond, slave, i) {
+ bond_for_each_slave(bond, slave, iter) {
if (res > (PAGE_SIZE - IFNAMSIZ)) {
/* not enough space for another interface name */
if ((PAGE_SIZE - res) > 10)
@@ -224,288 +205,95 @@
}
res += sprintf(buf + res, "%s ", slave->dev->name);
}
- read_unlock(&bond->lock);
- if (res)
- buf[res-1] = '\n'; /* eat the leftover space */
- return res;
-}
-/*
- * Set the slaves in the current bond. The bond interface must be
- * up for this to succeed.
- * This is supposed to be only thin wrapper for bond_enslave and bond_release.
- * All hard work should be done there.
- */
-static ssize_t bonding_store_slaves(struct device *d,
- struct device_attribute *attr,
- const char *buffer, size_t count)
-{
- char command[IFNAMSIZ + 1] = { 0, };
- char *ifname;
- int res, ret = count;
- struct net_device *dev;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
-
- sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
- ifname = command + 1;
- if ((strlen(command) <= 1) ||
- !dev_valid_name(ifname))
- goto err_no_cmd;
-
- dev = __dev_get_by_name(dev_net(bond->dev), ifname);
- if (!dev) {
- pr_info("%s: Interface %s does not exist!\n",
- bond->dev->name, ifname);
- ret = -ENODEV;
- goto out;
- }
-
- switch (command[0]) {
- case '+':
- pr_info("%s: Adding slave %s.\n", bond->dev->name, dev->name);
- res = bond_enslave(bond->dev, dev);
- break;
-
- case '-':
- pr_info("%s: Removing slave %s.\n", bond->dev->name, dev->name);
- res = bond_release(bond->dev, dev);
- break;
-
- default:
- goto err_no_cmd;
- }
+ rtnl_unlock();
if (res)
- ret = res;
- goto out;
-
-err_no_cmd:
- pr_err("no command found in slaves file for bond %s. Use +ifname or -ifname.\n",
- bond->dev->name);
- ret = -EPERM;
+ buf[res-1] = '\n'; /* eat the leftover space */
-out:
- rtnl_unlock();
- return ret;
+ return res;
}
-
static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves,
- bonding_store_slaves);
+ bonding_sysfs_store_option);
-/*
- * Show and set the bonding mode. The bond interface must be down to
- * change the mode.
- */
+/* Show the bonding mode. */
static ssize_t bonding_show_mode(struct device *d,
struct device_attribute *attr, char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- bond_mode_tbl[bond->params.mode].modename,
- bond->params.mode);
-}
+ val = bond_opt_get_val(BOND_OPT_MODE, BOND_MODE(bond));
-static ssize_t bonding_store_mode(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
-
- if (bond->dev->flags & IFF_UP) {
- pr_err("unable to update mode of %s because interface is up.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- if (bond->slave_cnt > 0) {
- pr_err("unable to update mode of %s because it has slaves.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- new_value = bond_parse_parm(buf, bond_mode_tbl);
- if (new_value < 0) {
- pr_err("%s: Ignoring invalid mode value %.*s.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
- ret = -EINVAL;
- goto out;
- }
- if ((new_value == BOND_MODE_ALB ||
- new_value == BOND_MODE_TLB) &&
- bond->params.arp_interval) {
- pr_err("%s: %s mode is incompatible with arp monitoring.\n",
- bond->dev->name, bond_mode_tbl[new_value].modename);
- ret = -EINVAL;
- goto out;
- }
-
- bond->params.mode = new_value;
- bond_set_mode_ops(bond, bond->params.mode);
- pr_info("%s: setting mode to %s (%d).\n",
- bond->dev->name, bond_mode_tbl[new_value].modename,
- new_value);
-out:
- rtnl_unlock();
- return ret;
+ return sprintf(buf, "%s %d\n", val->string, BOND_MODE(bond));
}
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
- bonding_show_mode, bonding_store_mode);
+ bonding_show_mode, bonding_sysfs_store_option);
-/*
- * Show and set the bonding transmit hash method.
- * The bond interface must be down to change the xmit hash policy.
- */
+/* Show the bonding transmit hash method. */
static ssize_t bonding_show_xmit_hash(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- xmit_hashtype_tbl[bond->params.xmit_policy].modename,
- bond->params.xmit_policy);
-}
-
-static ssize_t bonding_store_xmit_hash(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (bond->dev->flags & IFF_UP) {
- pr_err("%s: Interface is up. Unable to update xmit policy.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
+ val = bond_opt_get_val(BOND_OPT_XMIT_HASH, bond->params.xmit_policy);
- new_value = bond_parse_parm(buf, xmit_hashtype_tbl);
- if (new_value < 0) {
- pr_err("%s: Ignoring invalid xmit hash policy value %.*s.\n",
- bond->dev->name,
- (int)strlen(buf) - 1, buf);
- ret = -EINVAL;
- goto out;
- } else {
- bond->params.xmit_policy = new_value;
- bond_set_mode_ops(bond, bond->params.mode);
- pr_info("%s: setting xmit hash policy to %s (%d).\n",
- bond->dev->name,
- xmit_hashtype_tbl[new_value].modename, new_value);
- }
-out:
- return ret;
+ return sprintf(buf, "%s %d\n", val->string, bond->params.xmit_policy);
}
static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR,
- bonding_show_xmit_hash, bonding_store_xmit_hash);
+ bonding_show_xmit_hash, bonding_sysfs_store_option);
-/*
- * Show and set arp_validate.
- */
+/* Show arp_validate. */
static ssize_t bonding_show_arp_validate(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- arp_validate_tbl[bond->params.arp_validate].modename,
- bond->params.arp_validate);
-}
-
-static ssize_t bonding_store_arp_validate(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value;
- struct bonding *bond = to_bond(d);
-
- new_value = bond_parse_parm(buf, arp_validate_tbl);
- if (new_value < 0) {
- pr_err("%s: Ignoring invalid arp_validate value %s\n",
- bond->dev->name, buf);
- return -EINVAL;
- }
- if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
- pr_err("%s: arp_validate only supported in active-backup mode.\n",
- bond->dev->name);
- return -EINVAL;
- }
- pr_info("%s: setting arp_validate to %s (%d).\n",
- bond->dev->name, arp_validate_tbl[new_value].modename,
- new_value);
-
- bond->params.arp_validate = new_value;
+ val = bond_opt_get_val(BOND_OPT_ARP_VALIDATE,
+ bond->params.arp_validate);
- return count;
+ return sprintf(buf, "%s %d\n", val->string, bond->params.arp_validate);
}
-
static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate,
- bonding_store_arp_validate);
+ bonding_sysfs_store_option);
-/*
- * Show and store fail_over_mac. User only allowed to change the
- * value when there are no slaves.
- */
-static ssize_t bonding_show_fail_over_mac(struct device *d,
- struct device_attribute *attr,
- char *buf)
+/* Show arp_all_targets. */
+static ssize_t bonding_show_arp_all_targets(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
+ val = bond_opt_get_val(BOND_OPT_ARP_ALL_TARGETS,
+ bond->params.arp_all_targets);
return sprintf(buf, "%s %d\n",
- fail_over_mac_tbl[bond->params.fail_over_mac].modename,
- bond->params.fail_over_mac);
+ val->string, bond->params.arp_all_targets);
}
+static DEVICE_ATTR(arp_all_targets, S_IRUGO | S_IWUSR,
+ bonding_show_arp_all_targets, bonding_sysfs_store_option);
-static ssize_t bonding_store_fail_over_mac(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
+/* Show fail_over_mac. */
+static ssize_t bonding_show_fail_over_mac(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- int new_value;
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- if (bond->slave_cnt != 0) {
- pr_err("%s: Can't alter fail_over_mac with slaves in bond.\n",
- bond->dev->name);
- return -EPERM;
- }
-
- new_value = bond_parse_parm(buf, fail_over_mac_tbl);
- if (new_value < 0) {
- pr_err("%s: Ignoring invalid fail_over_mac value %s.\n",
- bond->dev->name, buf);
- return -EINVAL;
- }
-
- bond->params.fail_over_mac = new_value;
- pr_info("%s: Setting fail_over_mac to %s (%d).\n",
- bond->dev->name, fail_over_mac_tbl[new_value].modename,
- new_value);
+ val = bond_opt_get_val(BOND_OPT_FAIL_OVER_MAC,
+ bond->params.fail_over_mac);
- return count;
+ return sprintf(buf, "%s %d\n", val->string, bond->params.fail_over_mac);
}
-
static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR,
- bonding_show_fail_over_mac, bonding_store_fail_over_mac);
+ bonding_show_fail_over_mac, bonding_sysfs_store_option);
-/*
- * Show and set the arp timer interval. There are two tricky bits
- * here. First, if ARP monitoring is activated, then we must disable
- * MII monitoring. Second, if the ARP timer isn't running, we must
- * start it.
- */
+/* Show the arp timer interval. */
static ssize_t bonding_show_arp_interval(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -514,78 +302,16 @@
return sprintf(buf, "%d\n", bond->params.arp_interval);
}
-
-static ssize_t bonding_store_arp_interval(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no arp_interval value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if (new_value < 0) {
- pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
- bond->dev->name, new_value, INT_MAX);
- ret = -EINVAL;
- goto out;
- }
- if (bond->params.mode == BOND_MODE_ALB ||
- bond->params.mode == BOND_MODE_TLB ||
- bond->params.mode == BOND_MODE_8023AD) {
- pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
- bond->dev->name, bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- pr_info("%s: Setting ARP monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.arp_interval = new_value;
- if (new_value) {
- if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
- bond->params.miimon = 0;
- }
- if (!bond->params.arp_targets[0])
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
- bond->dev->name);
- }
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the ARP timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
- if (!new_value) {
- cancel_delayed_work_sync(&bond->arp_work);
- } else {
- cancel_delayed_work_sync(&bond->mii_work);
- queue_delayed_work(bond->wq, &bond->arp_work, 0);
- }
- }
-out:
- rtnl_unlock();
- return ret;
-}
static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR,
- bonding_show_arp_interval, bonding_store_arp_interval);
+ bonding_show_arp_interval, bonding_sysfs_store_option);
-/*
- * Show and set the arp targets.
- */
+/* Show the arp targets. */
static ssize_t bonding_show_arp_targets(struct device *d,
struct device_attribute *attr,
char *buf)
{
- int i, res = 0;
struct bonding *bond = to_bond(d);
+ int i, res = 0;
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) {
if (bond->params.arp_targets[i])
@@ -594,93 +320,13 @@
}
if (res)
buf[res-1] = '\n'; /* eat the leftover space */
- return res;
-}
-
-static ssize_t bonding_store_arp_targets(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- __be32 newtarget;
- int i = 0, done = 0, ret = count;
- struct bonding *bond = to_bond(d);
- __be32 *targets;
-
- targets = bond->params.arp_targets;
- newtarget = in_aton(buf + 1);
- /* look for adds */
- if (buf[0] == '+') {
- if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err("%s: invalid ARP target %pI4 specified for addition\n",
- bond->dev->name, &newtarget);
- ret = -EINVAL;
- goto out;
- }
- /* look for an empty slot to put the target in, and check for dupes */
- for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
- if (targets[i] == newtarget) { /* duplicate */
- pr_err("%s: ARP target %pI4 is already present\n",
- bond->dev->name, &newtarget);
- ret = -EINVAL;
- goto out;
- }
- if (targets[i] == 0) {
- pr_info("%s: adding ARP target %pI4.\n",
- bond->dev->name, &newtarget);
- done = 1;
- targets[i] = newtarget;
- }
- }
- if (!done) {
- pr_err("%s: ARP target table is full!\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- } else if (buf[0] == '-') {
- if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err("%s: invalid ARP target %pI4 specified for removal\n",
- bond->dev->name, &newtarget);
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
- if (targets[i] == newtarget) {
- int j;
- pr_info("%s: removing ARP target %pI4.\n",
- bond->dev->name, &newtarget);
- for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
- targets[j] = targets[j+1];
-
- targets[j] = 0;
- done = 1;
- }
- }
- if (!done) {
- pr_info("%s: unable to remove nonexistent ARP target %pI4.\n",
- bond->dev->name, &newtarget);
- ret = -EINVAL;
- goto out;
- }
- } else {
- pr_err("no command found in arp_ip_targets file for bond %s. Use + or -.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
-out:
- return ret;
+ return res;
}
-static DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets);
+static DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR,
+ bonding_show_arp_targets, bonding_sysfs_store_option);
-/*
- * Show and set the up and down delays. These must be multiples of the
- * MII monitoring value, and are stored internally as the multiplier.
- * Thus, we must translate to MS for the real world.
- */
+/* Show the up and down delays. */
static ssize_t bonding_show_downdelay(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -689,54 +335,8 @@
return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon);
}
-
-static ssize_t bonding_store_downdelay(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
- if (!(bond->params.miimon)) {
- pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no down delay value specified.\n", bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if (new_value < 0) {
- pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 0, INT_MAX);
- ret = -EINVAL;
- goto out;
- } else {
- if ((new_value % bond->params.miimon) != 0) {
- pr_warning("%s: Warning: down delay (%d) is not a multiple of miimon (%d), delay rounded to %d ms\n",
- bond->dev->name, new_value,
- bond->params.miimon,
- (new_value / bond->params.miimon) *
- bond->params.miimon);
- }
- bond->params.downdelay = new_value / bond->params.miimon;
- pr_info("%s: Setting down delay to %d.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
-
- }
-
-out:
- rtnl_unlock();
- return ret;
-}
static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR,
- bonding_show_downdelay, bonding_store_downdelay);
+ bonding_show_downdelay, bonding_sysfs_store_option);
static ssize_t bonding_show_updelay(struct device *d,
struct device_attribute *attr,
@@ -747,109 +347,23 @@
return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon);
}
-
-static ssize_t bonding_store_updelay(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
- if (!(bond->params.miimon)) {
- pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no up delay value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if (new_value < 0) {
- pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 0, INT_MAX);
- ret = -EINVAL;
- goto out;
- } else {
- if ((new_value % bond->params.miimon) != 0) {
- pr_warning("%s: Warning: up delay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
- bond->dev->name, new_value,
- bond->params.miimon,
- (new_value / bond->params.miimon) *
- bond->params.miimon);
- }
- bond->params.updelay = new_value / bond->params.miimon;
- pr_info("%s: Setting up delay to %d.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- }
-
-out:
- rtnl_unlock();
- return ret;
-}
static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR,
- bonding_show_updelay, bonding_store_updelay);
+ bonding_show_updelay, bonding_sysfs_store_option);
-/*
- * Show and set the LACP interval. Interface must be down, and the mode
- * must be set to 802.3ad mode.
- */
+/* Show the LACP interval. */
static ssize_t bonding_show_lacp(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- bond_lacp_tbl[bond->params.lacp_fast].modename,
- bond->params.lacp_fast);
-}
-
-static ssize_t bonding_store_lacp(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (bond->dev->flags & IFF_UP) {
- pr_err("%s: Unable to update LACP rate because interface is up.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- if (bond->params.mode != BOND_MODE_8023AD) {
- pr_err("%s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- new_value = bond_parse_parm(buf, bond_lacp_tbl);
+ val = bond_opt_get_val(BOND_OPT_LACP_RATE, bond->params.lacp_fast);
- if ((new_value == 1) || (new_value == 0)) {
- bond->params.lacp_fast = new_value;
- bond_3ad_update_lacp_rate(bond);
- pr_info("%s: Setting LACP rate to %s (%d).\n",
- bond->dev->name, bond_lacp_tbl[new_value].modename,
- new_value);
- } else {
- pr_err("%s: Ignoring invalid LACP rate value %.*s.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
- ret = -EINVAL;
- }
-out:
- return ret;
+ return sprintf(buf, "%s %d\n", val->string, bond->params.lacp_fast);
}
static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR,
- bonding_show_lacp, bonding_store_lacp);
+ bonding_show_lacp, bonding_sysfs_store_option);
static ssize_t bonding_show_min_links(struct device *d,
struct device_attribute *attr,
@@ -857,79 +371,26 @@
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.min_links);
-}
-
-static ssize_t bonding_store_min_links(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct bonding *bond = to_bond(d);
- int ret;
- unsigned int new_value;
-
- ret = kstrtouint(buf, 0, &new_value);
- if (ret < 0) {
- pr_err("%s: Ignoring invalid min links value %s.\n",
- bond->dev->name, buf);
- return ret;
- }
-
- pr_info("%s: Setting min links value to %u\n",
- bond->dev->name, new_value);
- bond->params.min_links = new_value;
- return count;
+ return sprintf(buf, "%u\n", bond->params.min_links);
}
static DEVICE_ATTR(min_links, S_IRUGO | S_IWUSR,
- bonding_show_min_links, bonding_store_min_links);
+ bonding_show_min_links, bonding_sysfs_store_option);
static ssize_t bonding_show_ad_select(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- ad_select_tbl[bond->params.ad_select].modename,
- bond->params.ad_select);
-}
-
-
-static ssize_t bonding_store_ad_select(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (bond->dev->flags & IFF_UP) {
- pr_err("%s: Unable to update ad_select because interface is up.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
- new_value = bond_parse_parm(buf, ad_select_tbl);
+ val = bond_opt_get_val(BOND_OPT_AD_SELECT, bond->params.ad_select);
- if (new_value != -1) {
- bond->params.ad_select = new_value;
- pr_info("%s: Setting ad_select to %s (%d).\n",
- bond->dev->name, ad_select_tbl[new_value].modename,
- new_value);
- } else {
- pr_err("%s: Ignoring invalid ad_select value %.*s.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
- ret = -EINVAL;
- }
-out:
- return ret;
+ return sprintf(buf, "%s %d\n", val->string, bond->params.ad_select);
}
static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR,
- bonding_show_ad_select, bonding_store_ad_select);
+ bonding_show_ad_select, bonding_sysfs_store_option);
-/*
- * Show and set the number of peer notifications to send after a failover event.
- */
+/* Show the number of peer notifications to send after a failover event. */
static ssize_t bonding_show_num_peer_notif(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -937,26 +398,12 @@
struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.num_peer_notif);
}
-
-static ssize_t bonding_store_num_peer_notif(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct bonding *bond = to_bond(d);
- int err = kstrtou8(buf, 10, &bond->params.num_peer_notif);
- return err ? err : count;
-}
static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR,
- bonding_show_num_peer_notif, bonding_store_num_peer_notif);
+ bonding_show_num_peer_notif, bonding_sysfs_store_option);
static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR,
- bonding_show_num_peer_notif, bonding_store_num_peer_notif);
+ bonding_show_num_peer_notif, bonding_sysfs_store_option);
-/*
- * Show and set the MII monitor interval. There are two tricky bits
- * here. First, if MII monitoring is activated, then we must disable
- * ARP monitoring. Second, if the timer isn't running, we must
- * start it.
- */
+/* Show the MII monitor interval. */
static ssize_t bonding_show_miimon(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -965,203 +412,47 @@
return sprintf(buf, "%d\n", bond->params.miimon);
}
-
-static ssize_t bonding_store_miimon(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no miimon value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if (new_value < 0) {
- pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 0, INT_MAX);
- ret = -EINVAL;
- goto out;
- }
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.miimon = new_value;
- if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
- if (new_value && bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
- bond->params.arp_interval = 0;
- if (bond->params.arp_validate)
- bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
- }
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the MII timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
- if (!new_value) {
- cancel_delayed_work_sync(&bond->mii_work);
- } else {
- cancel_delayed_work_sync(&bond->arp_work);
- queue_delayed_work(bond->wq, &bond->mii_work, 0);
- }
- }
-out:
- rtnl_unlock();
- return ret;
-}
static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
- bonding_show_miimon, bonding_store_miimon);
+ bonding_show_miimon, bonding_sysfs_store_option);
-/*
- * Show and set the primary slave. The store function is much
- * simpler than bonding_store_slaves function because it only needs to
- * handle one interface name.
- * The bond must be a mode that supports a primary for this be
- * set.
- */
+/* Show the primary slave. */
static ssize_t bonding_show_primary(struct device *d,
struct device_attribute *attr,
char *buf)
{
- int count = 0;
struct bonding *bond = to_bond(d);
+ struct slave *primary;
+ int count = 0;
- if (bond->primary_slave)
- count = sprintf(buf, "%s\n", bond->primary_slave->dev->name);
-
- return count;
-}
-
-static ssize_t bonding_store_primary(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int i;
- struct slave *slave;
- struct bonding *bond = to_bond(d);
- char ifname[IFNAMSIZ];
-
- if (!rtnl_trylock())
- return restart_syscall();
- block_netpoll_tx();
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
-
- if (!USES_PRIMARY(bond->params.mode)) {
- pr_info("%s: Unable to set primary slave; %s is in mode %d\n",
- bond->dev->name, bond->dev->name, bond->params.mode);
- goto out;
- }
-
- sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
-
- /* check to see if we are clearing primary */
- if (!strlen(ifname) || buf[0] == '\n') {
- pr_info("%s: Setting primary slave to None.\n",
- bond->dev->name);
- bond->primary_slave = NULL;
- memset(bond->params.primary, 0, sizeof(bond->params.primary));
- bond_select_active_slave(bond);
- goto out;
- }
-
- bond_for_each_slave(bond, slave, i) {
- if (strncmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
- pr_info("%s: Setting %s as primary slave.\n",
- bond->dev->name, slave->dev->name);
- bond->primary_slave = slave;
- strcpy(bond->params.primary, slave->dev->name);
- bond_select_active_slave(bond);
- goto out;
- }
- }
-
- strncpy(bond->params.primary, ifname, IFNAMSIZ);
- bond->params.primary[IFNAMSIZ - 1] = 0;
-
- pr_info("%s: Recording %s as primary, "
- "but it has not been enslaved to %s yet.\n",
- bond->dev->name, ifname, bond->dev->name);
-out:
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
- unblock_netpoll_tx();
- rtnl_unlock();
+ rcu_read_lock();
+ primary = rcu_dereference(bond->primary_slave);
+ if (primary)
+ count = sprintf(buf, "%s\n", primary->dev->name);
+ rcu_read_unlock();
return count;
}
static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR,
- bonding_show_primary, bonding_store_primary);
+ bonding_show_primary, bonding_sysfs_store_option);
-/*
- * Show and set the primary_reselect flag.
- */
+/* Show the primary_reselect flag. */
static ssize_t bonding_show_primary_reselect(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
- return sprintf(buf, "%s %d\n",
- pri_reselect_tbl[bond->params.primary_reselect].modename,
- bond->params.primary_reselect);
-}
-
-static ssize_t bonding_store_primary_reselect(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (!rtnl_trylock())
- return restart_syscall();
-
- new_value = bond_parse_parm(buf, pri_reselect_tbl);
- if (new_value < 0) {
- pr_err("%s: Ignoring invalid primary_reselect value %.*s.\n",
- bond->dev->name,
- (int) strlen(buf) - 1, buf);
- ret = -EINVAL;
- goto out;
- }
+ val = bond_opt_get_val(BOND_OPT_PRIMARY_RESELECT,
+ bond->params.primary_reselect);
- bond->params.primary_reselect = new_value;
- pr_info("%s: setting primary_reselect to %s (%d).\n",
- bond->dev->name, pri_reselect_tbl[new_value].modename,
- new_value);
-
- block_netpoll_tx();
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
- bond_select_active_slave(bond);
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
- unblock_netpoll_tx();
-out:
- rtnl_unlock();
- return ret;
+ return sprintf(buf, "%s %d\n",
+ val->string, bond->params.primary_reselect);
}
static DEVICE_ATTR(primary_reselect, S_IRUGO | S_IWUSR,
- bonding_show_primary_reselect,
- bonding_store_primary_reselect);
+ bonding_show_primary_reselect, bonding_sysfs_store_option);
-/*
- * Show and set the use_carrier flag.
- */
+/* Show the use_carrier flag. */
static ssize_t bonding_show_carrier(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1170,165 +461,43 @@
return sprintf(buf, "%d\n", bond->params.use_carrier);
}
-
-static ssize_t bonding_store_carrier(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
-
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no use_carrier value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if ((new_value == 0) || (new_value == 1)) {
- bond->params.use_carrier = new_value;
- pr_info("%s: Setting use_carrier to %d.\n",
- bond->dev->name, new_value);
- } else {
- pr_info("%s: Ignoring invalid use_carrier value %d.\n",
- bond->dev->name, new_value);
- }
-out:
- return ret;
-}
static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR,
- bonding_show_carrier, bonding_store_carrier);
+ bonding_show_carrier, bonding_sysfs_store_option);
-/*
- * Show and set currently active_slave.
- */
+/* Show currently active_slave. */
static ssize_t bonding_show_active_slave(struct device *d,
struct device_attribute *attr,
char *buf)
{
- struct slave *curr;
struct bonding *bond = to_bond(d);
+ struct net_device *slave_dev;
int count = 0;
- read_lock(&bond->curr_slave_lock);
- curr = bond->curr_active_slave;
- read_unlock(&bond->curr_slave_lock);
-
- if (USES_PRIMARY(bond->params.mode) && curr)
- count = sprintf(buf, "%s\n", curr->dev->name);
- return count;
-}
-
-static ssize_t bonding_store_active_slave(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int i;
- struct slave *slave;
- struct slave *old_active = NULL;
- struct slave *new_active = NULL;
- struct bonding *bond = to_bond(d);
- char ifname[IFNAMSIZ];
-
- if (!rtnl_trylock())
- return restart_syscall();
-
- block_netpoll_tx();
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
-
- if (!USES_PRIMARY(bond->params.mode)) {
- pr_info("%s: Unable to change active slave; %s is in mode %d\n",
- bond->dev->name, bond->dev->name, bond->params.mode);
- goto out;
- }
-
- sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
-
- /* check to see if we are clearing active */
- if (!strlen(ifname) || buf[0] == '\n') {
- pr_info("%s: Clearing current active slave.\n",
- bond->dev->name);
- bond->curr_active_slave = NULL;
- bond_select_active_slave(bond);
- goto out;
- }
-
- bond_for_each_slave(bond, slave, i) {
- if (strncmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
- old_active = bond->curr_active_slave;
- new_active = slave;
- if (new_active == old_active) {
- /* do nothing */
- pr_info("%s: %s is already the current"
- " active slave.\n",
- bond->dev->name,
- slave->dev->name);
- goto out;
- }
- else {
- if ((new_active) &&
- (old_active) &&
- (new_active->link == BOND_LINK_UP) &&
- IS_UP(new_active->dev)) {
- pr_info("%s: Setting %s as active"
- " slave.\n",
- bond->dev->name,
- slave->dev->name);
- bond_change_active_slave(bond,
- new_active);
- }
- else {
- pr_info("%s: Could not set %s as"
- " active slave; either %s is"
- " down or the link is down.\n",
- bond->dev->name,
- slave->dev->name,
- slave->dev->name);
- }
- goto out;
- }
- }
- }
-
- pr_info("%s: Unable to set %.*s as active slave.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
- out:
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
- unblock_netpoll_tx();
-
- rtnl_unlock();
+ rcu_read_lock();
+ slave_dev = bond_option_active_slave_get_rcu(bond);
+ if (slave_dev)
+ count = sprintf(buf, "%s\n", slave_dev->name);
+ rcu_read_unlock();
return count;
-
}
static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR,
- bonding_show_active_slave, bonding_store_active_slave);
+ bonding_show_active_slave, bonding_sysfs_store_option);
-
-/*
- * Show link status of the bond interface.
- */
+/* Show link status of the bond interface. */
static ssize_t bonding_show_mii_status(struct device *d,
struct device_attribute *attr,
char *buf)
{
- struct slave *curr;
struct bonding *bond = to_bond(d);
+ bool active = !!rcu_access_pointer(bond->curr_active_slave);
- read_lock(&bond->curr_slave_lock);
- curr = bond->curr_active_slave;
- read_unlock(&bond->curr_slave_lock);
-
- return sprintf(buf, "%s\n", curr ? "up" : "down");
+ return sprintf(buf, "%s\n", active ? "up" : "down");
}
static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
-/*
- * Show current 802.3ad aggregator ID.
- */
+/* Show current 802.3ad aggregator ID. */
static ssize_t bonding_show_ad_aggregator(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1336,7 +505,7 @@
int count = 0;
struct bonding *bond = to_bond(d);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
bond_3ad_get_active_agg_info(bond, &ad_info)
@@ -1348,9 +517,7 @@
static DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL);
-/*
- * Show number of active 802.3ad ports.
- */
+/* Show number of active 802.3ad ports. */
static ssize_t bonding_show_ad_num_ports(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1358,7 +525,7 @@
int count = 0;
struct bonding *bond = to_bond(d);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
bond_3ad_get_active_agg_info(bond, &ad_info)
@@ -1370,9 +537,7 @@
static DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL);
-/*
- * Show current 802.3ad actor key.
- */
+/* Show current 802.3ad actor key. */
static ssize_t bonding_show_ad_actor_key(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1380,7 +545,7 @@
int count = 0;
struct bonding *bond = to_bond(d);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN)) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
bond_3ad_get_active_agg_info(bond, &ad_info)
@@ -1392,9 +557,7 @@
static DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL);
-/*
- * Show current 802.3ad partner key.
- */
+/* Show current 802.3ad partner key. */
static ssize_t bonding_show_ad_partner_key(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1402,7 +565,7 @@
int count = 0;
struct bonding *bond = to_bond(d);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN)) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
bond_3ad_get_active_agg_info(bond, &ad_info)
@@ -1414,9 +577,7 @@
static DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL);
-/*
- * Show current 802.3ad partner mac.
- */
+/* Show current 802.3ad partner mac. */
static ssize_t bonding_show_ad_partner_mac(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -1424,7 +585,7 @@
int count = 0;
struct bonding *bond = to_bond(d);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN)) {
struct ad_info ad_info;
if (!bond_3ad_get_active_agg_info(bond, &ad_info))
count = sprintf(buf, "%pM\n", ad_info.partner_system);
@@ -1434,22 +595,20 @@
}
static DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL);
-/*
- * Show the queue_ids of the slaves in the current bond.
- */
+/* Show the queue_ids of the slaves in the current bond. */
static ssize_t bonding_show_queue_id(struct device *d,
struct device_attribute *attr,
char *buf)
{
- struct slave *slave;
- int i, res = 0;
struct bonding *bond = to_bond(d);
+ struct list_head *iter;
+ struct slave *slave;
+ int res = 0;
if (!rtnl_trylock())
return restart_syscall();
- read_lock(&bond->lock);
- bond_for_each_slave(bond, slave, i) {
+ bond_for_each_slave(bond, slave, iter) {
if (res > (PAGE_SIZE - IFNAMSIZ - 6)) {
/* not enough space for another interface_name:queue_id pair */
if ((PAGE_SIZE - res) > 10)
@@ -1460,198 +619,327 @@
res += sprintf(buf + res, "%s:%d ",
slave->dev->name, slave->queue_id);
}
- read_unlock(&bond->lock);
if (res)
buf[res-1] = '\n'; /* eat the leftover space */
+
rtnl_unlock();
+
return res;
}
+static DEVICE_ATTR(queue_id, S_IRUGO | S_IWUSR, bonding_show_queue_id,
+ bonding_sysfs_store_option);
-/*
- * Set the queue_ids of the slaves in the current bond. The bond
- * interface must be enslaved for this to work.
- */
-static ssize_t bonding_store_queue_id(struct device *d,
- struct device_attribute *attr,
- const char *buffer, size_t count)
+
+/* Show the all_slaves_active flag. */
+static ssize_t bonding_show_slaves_active(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct slave *slave, *update_slave;
struct bonding *bond = to_bond(d);
- u16 qid;
- int i, ret = count;
- char *delim;
- struct net_device *sdev = NULL;
- if (!rtnl_trylock())
- return restart_syscall();
+ return sprintf(buf, "%d\n", bond->params.all_slaves_active);
+}
+static DEVICE_ATTR(all_slaves_active, S_IRUGO | S_IWUSR,
+ bonding_show_slaves_active, bonding_sysfs_store_option);
- /* delim will point to queue id if successful */
- delim = strchr(buffer, ':');
- if (!delim)
- goto err_no_cmd;
+/* Show the number of IGMP membership reports to send on link failure */
+static ssize_t bonding_show_resend_igmp(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
- /*
- * Terminate string that points to device name and bump it
- * up one, so we can read the queue id there.
- */
- *delim = '\0';
- if (sscanf(++delim, "%hd\n", &qid) != 1)
- goto err_no_cmd;
+ return sprintf(buf, "%d\n", bond->params.resend_igmp);
+}
+static DEVICE_ATTR(resend_igmp, S_IRUGO | S_IWUSR,
+ bonding_show_resend_igmp, bonding_sysfs_store_option);
- /* Check buffer length, valid ifname and queue id */
- if (strlen(buffer) > IFNAMSIZ ||
- !dev_valid_name(buffer) ||
- qid > bond->dev->real_num_tx_queues)
- goto err_no_cmd;
- /* Get the pointer to that interface if it exists */
- sdev = __dev_get_by_name(dev_net(bond->dev), buffer);
- if (!sdev)
- goto err_no_cmd;
+static ssize_t bonding_show_lp_interval(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
- read_lock(&bond->lock);
+ return sprintf(buf, "%d\n", bond->params.lp_interval);
+}
+static DEVICE_ATTR(lp_interval, S_IRUGO | S_IWUSR,
+ bonding_show_lp_interval, bonding_sysfs_store_option);
- /* Search for thes slave and check for duplicate qids */
- update_slave = NULL;
- bond_for_each_slave(bond, slave, i) {
- if (sdev == slave->dev)
- /*
- * We don't need to check the matching
- * slave for dups, since we're overwriting it
- */
- update_slave = slave;
- else if (qid && qid == slave->queue_id) {
- goto err_no_cmd_unlock;
- }
- }
+static ssize_t bonding_show_tlb_dynamic_lb(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ return sprintf(buf, "%d\n", bond->params.tlb_dynamic_lb);
+}
+static DEVICE_ATTR(tlb_dynamic_lb, S_IRUGO | S_IWUSR,
+ bonding_show_tlb_dynamic_lb, bonding_sysfs_store_option);
- if (!update_slave)
- goto err_no_cmd_unlock;
+static ssize_t bonding_show_packets_per_slave(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ unsigned int packets_per_slave = bond->params.packets_per_slave;
- /* Actually set the qids for the slave */
- update_slave->queue_id = qid;
+ return sprintf(buf, "%u\n", packets_per_slave);
+}
+static DEVICE_ATTR(packets_per_slave, S_IRUGO | S_IWUSR,
+ bonding_show_packets_per_slave, bonding_sysfs_store_option);
- read_unlock(&bond->lock);
-out:
- rtnl_unlock();
- return ret;
+static ssize_t bonding_show_ad_actor_sys_prio(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
-err_no_cmd_unlock:
- read_unlock(&bond->lock);
-err_no_cmd:
- pr_info("invalid input for queue_id set for %s.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN))
+ return sprintf(buf, "%hu\n", bond->params.ad_actor_sys_prio);
+
+ return 0;
}
+static DEVICE_ATTR(ad_actor_sys_prio, S_IRUGO | S_IWUSR,
+ bonding_show_ad_actor_sys_prio, bonding_sysfs_store_option);
-static DEVICE_ATTR(queue_id, S_IRUGO | S_IWUSR, bonding_show_queue_id,
- bonding_store_queue_id);
+static ssize_t bonding_show_ad_actor_system(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN))
+ return sprintf(buf, "%pM\n", bond->params.ad_actor_system);
-/*
- * Show and set the all_slaves_active flag.
- */
-static ssize_t bonding_show_slaves_active(struct device *d,
- struct device_attribute *attr,
- char *buf)
+ return 0;
+}
+
+static DEVICE_ATTR(ad_actor_system, S_IRUGO | S_IWUSR,
+ bonding_show_ad_actor_system, bonding_sysfs_store_option);
+
+static ssize_t bonding_show_ad_user_port_key(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.all_slaves_active);
+ if (BOND_MODE(bond) == BOND_MODE_8023AD && capable(CAP_NET_ADMIN))
+ return sprintf(buf, "%hu\n", bond->params.ad_user_port_key);
+
+ return 0;
}
+static DEVICE_ATTR(ad_user_port_key, S_IRUGO | S_IWUSR,
+ bonding_show_ad_user_port_key, bonding_sysfs_store_option);
-static ssize_t bonding_store_slaves_active(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t bonding_show_l2da_default_slave(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- int i, new_value, ret = count;
struct bonding *bond = to_bond(d);
- struct slave *slave;
+ char ifname[IFNAMSIZ + 1];
+ int ret;
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no all_slaves_active value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
+ ret = bond_l2da_ctrl_get_default(bond, ifname, sizeof(ifname));
+ return ret ? ret : snprintf(buf, PAGE_SIZE, "%s\n", ifname);
+}
- if (new_value == bond->params.all_slaves_active)
- goto out;
+static ssize_t bonding_store_l2da_default_slave(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bonding *bond = to_bond(d);
+ int ret = -EINVAL;
+ char ifname[IFNAMSIZ];
- if ((new_value == 0) || (new_value == 1)) {
- bond->params.all_slaves_active = new_value;
- } else {
- pr_info("%s: Ignoring invalid all_slaves_active value %d.\n",
- bond->dev->name, new_value);
- ret = -EINVAL;
- goto out;
+ if (sscanf(buf, "%15s", ifname) != 1) {/* IFNAMSIZ */
+ pr_info("%s: no L2DA slave name specified\n",
+ netdev_name(bond->dev));
+ return -EINVAL;
}
- read_lock(&bond->lock);
- bond_for_each_slave(bond, slave, i) {
- if (!bond_is_active_slave(slave)) {
- if (new_value)
- slave->inactive = 0;
- else
- slave->inactive = 1;
- }
- }
- read_unlock(&bond->lock);
-out:
- return ret;
+ ret = bond_l2da_ctrl_set_default(bond, ifname);
+ return ret ? ret : count;
}
-static DEVICE_ATTR(all_slaves_active, S_IRUGO | S_IWUSR,
- bonding_show_slaves_active, bonding_store_slaves_active);
-/*
- * Show and set the number of IGMP membership reports to send on link failure
- */
-static ssize_t bonding_show_resend_igmp(struct device *d,
- struct device_attribute *attr,
- char *buf)
+static DEVICE_ATTR(l2da_default_slave, S_IRUGO | S_IWUSR,
+ bonding_show_l2da_default_slave,
+ bonding_store_l2da_default_slave);
+
+static int bonding_show_l2da_table_clb(const unsigned char *da,
+ struct slave *slave, void *_ctx)
+{
+ struct bonding_show_l2da_table_clb_ctx *ctx = _ctx;
+
+ /* Each entry reported as xx:xx:xx:xx:xx:xx@ifname,
+ * so we have to make sure that we have enough space
+ * before we put the next one
+ */
+ if (ctx->res > (PAGE_SIZE - sizeof("xx:xx:xx:xx:xx:xx") + IFNAMSIZ)) {
+ /* not enough space for another da@interface_name pair */
+ if ((PAGE_SIZE - ctx->res) > sizeof("++more++"))
+ ctx->res = PAGE_SIZE - sizeof("++more++");
+ ctx->res += snprintf(ctx->buf + ctx->res, PAGE_SIZE - ctx->res,
+ "++more++");
+ return 1;
+ }
+ ctx->res += snprintf(ctx->buf + ctx->res, PAGE_SIZE - ctx->res,
+ "%pM@%s\n", da, netdev_name(slave->dev));
+ return 0;
+}
+
+static ssize_t bonding_show_l2da_table(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct bonding *bond = to_bond(d);
+ struct bonding_show_l2da_table_clb_ctx ctx = {
+ .buf = buf,
+ .res = 0,
+ };
+ int ret;
- return sprintf(buf, "%d\n", bond->params.resend_igmp);
+ ret = _bond_l2da_ctrl_try_lock(bond, false);
+ if (ret)
+ return ret;
+
+ bond_l2da_call_foreach(bond, bonding_show_l2da_table_clb, &ctx);
+
+ _bond_l2da_ctrl_unlock(bond, false);
+
+ if (ctx.res)
+ buf[ctx.res - 1] = '\n'; /* eat the leftover space */
+
+ return ctx.res;
}
-static ssize_t bonding_store_resend_igmp(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t bonding_store_l2da_table(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ int ret = -EINVAL;
+ char *delim;
+ unsigned char da[ETH_ALEN];
+ unsigned char ifname[IFNAMSIZ] = {0};
+ char *slave_ifname = NULL;
+
+ /* Check command syntax and extract parameters */
+ if (buf[0] == '+') {
+ /* delim will point to slave interface name if successful */
+ delim = strchr(buf, '@');
+ if (!delim) {
+ pr_err("%s: Invalid L2DA command string: %s\n",
+ netdev_name(bond->dev), buf);
+ return -EINVAL;
+ }
+ /* Terminate string that points to da and bump it up one, so we
+ * can read the device name there.
+ */
+ *delim = '\0';
+ if (sscanf(delim + 1, "%15s", ifname) != 1) { /* IFNAMSIZ */
+ pr_err("%s: no L2DA slave name specified\n",
+ netdev_name(bond->dev));
+ return -EINVAL;
+ }
+ slave_ifname = ifname;
+ } else if (buf[0] != '-') {
+ pr_err("%s: Invalid L2DA command string: %s\n",
+ netdev_name(bond->dev), buf);
+ return -EINVAL;
+ } else if (buf[1] == '*') {
+ bond_l2da_ctrl_reset_map(bond);
+ return count;
+ }
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no resend_igmp value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
+ if (!mac_pton(buf + 1, da)) {
+ pr_err("%s: Invalid L2DA MAC address string: %s\n",
+ netdev_name(bond->dev), buf + 1);
+ return -EINVAL;
}
- if (new_value < 0 || new_value > 255) {
- pr_err("%s: Invalid resend_igmp value %d not in range 0-255; rejected.\n",
- bond->dev->name, new_value);
- ret = -EINVAL;
- goto out;
+ ret = bond_l2da_ctrl_change_map_entry(bond, da, slave_ifname);
+ return ret ? ret : count;
+}
+
+static DEVICE_ATTR(l2da_table, S_IRUGO | S_IWUSR,
+ bonding_show_l2da_table, bonding_store_l2da_table);
+
+static ssize_t bonding_show_l2da_opts(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ u32 opts;
+ int ret;
+
+ ret = bond_l2da_ctrl_get_opts(bond, &opts);
+ return ret ? ret : snprintf(buf, PAGE_SIZE, "0x%08x\n", opts);
+}
+
+static ssize_t bonding_store_l2da_opts(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bonding *bond = to_bond(d);
+ int ret = -EINVAL;
+ unsigned int new_value;
+
+ ret = kstrtouint(buf, 0, &new_value);
+ if (ret < 0) {
+ pr_err("%s: Ignoring invalid opts value %s.\n",
+ bond->dev->name, buf);
+ return ret;
}
- pr_info("%s: Setting resend_igmp to %d.\n",
+ pr_info("%s: Setting opts value to 0x%08x\n",
bond->dev->name, new_value);
- bond->params.resend_igmp = new_value;
-out:
+ ret = bond_l2da_ctrl_set_opts(bond, new_value);
+ return ret ? ret : count;
+}
+
+static DEVICE_ATTR(l2da_opts, S_IRUGO | S_IWUSR,
+ bonding_show_l2da_opts,
+ bonding_store_l2da_opts);
+
+/* Show and store l2da_multimac. User only allowed to change the
+ * value when there are no slaves.
+ */
+static ssize_t bonding_show_l2da_multimac(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bonding *bond = to_bond(d);
+ const struct bond_opt_value *val;
+
+ val = bond_opt_get_val(BOND_OPT_L2DA_MULTIMAC,
+ bond->l2da_info.multimac);
+
+ return sprintf(buf, "%s %d\n", val->string, bond->l2da_info.multimac);
+}
+
+static ssize_t bonding_store_l2da_multimac(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bonding *bond = to_bond(d);
+ int ret;
+
+ ret = bond_opt_tryset_rtnl(bond, BOND_OPT_L2DA_MULTIMAC, (char *)buf);
+ if (!ret)
+ ret = count;
+
return ret;
}
-static DEVICE_ATTR(resend_igmp, S_IRUGO | S_IWUSR,
- bonding_show_resend_igmp, bonding_store_resend_igmp);
+static DEVICE_ATTR(l2da_multimac, S_IRUGO | S_IWUSR,
+ bonding_show_l2da_multimac, bonding_store_l2da_multimac);
static struct attribute *per_bond_attrs[] = {
&dev_attr_slaves.attr,
&dev_attr_mode.attr,
&dev_attr_fail_over_mac.attr,
&dev_attr_arp_validate.attr,
+ &dev_attr_arp_all_targets.attr,
&dev_attr_arp_interval.attr,
&dev_attr_arp_ip_target.attr,
&dev_attr_downdelay.attr,
@@ -1676,6 +964,16 @@
&dev_attr_all_slaves_active.attr,
&dev_attr_resend_igmp.attr,
&dev_attr_min_links.attr,
+ &dev_attr_lp_interval.attr,
+ &dev_attr_packets_per_slave.attr,
+ &dev_attr_tlb_dynamic_lb.attr,
+ &dev_attr_ad_actor_sys_prio.attr,
+ &dev_attr_ad_actor_system.attr,
+ &dev_attr_ad_user_port_key.attr,
+ &dev_attr_l2da_default_slave.attr,
+ &dev_attr_l2da_table.attr,
+ &dev_attr_l2da_opts.attr,
+ &dev_attr_l2da_multimac.attr,
NULL,
};
@@ -1684,8 +982,7 @@
.attrs = per_bond_attrs,
};
-/*
- * Initialize sysfs. This sets up the bonding_masters file in
+/* Initialize sysfs. This sets up the bonding_masters file in
* /sys/class/net.
*/
int bond_create_sysfs(struct bond_net *bn)
@@ -1695,9 +992,9 @@
bn->class_attr_bonding_masters = class_attr_bonding_masters;
sysfs_attr_init(&bn->class_attr_bonding_masters.attr);
- ret = netdev_class_create_file(&bn->class_attr_bonding_masters);
- /*
- * Permit multiple loads of the module by ignoring failures to
+ ret = netdev_class_create_file_ns(&bn->class_attr_bonding_masters,
+ bn->net);
+ /* Permit multiple loads of the module by ignoring failures to
* create the bonding_masters sysfs file. Bonding devices
* created by second or subsequent loads of the module will
* not be listed in, or controllable by, bonding_masters, but
@@ -1711,7 +1008,7 @@
/* Is someone being kinky and naming a device bonding_master? */
if (__dev_get_by_name(bn->net,
class_attr_bonding_masters.attr.name))
- pr_err("network device named %s already exists in sysfs",
+ pr_err("network device named %s already exists in sysfs\n",
class_attr_bonding_masters.attr.name);
ret = 0;
}
@@ -1720,16 +1017,13 @@
}
-/*
- * Remove /sys/class/net/bonding_masters.
- */
+/* Remove /sys/class/net/bonding_masters. */
void bond_destroy_sysfs(struct bond_net *bn)
{
- netdev_class_remove_file(&bn->class_attr_bonding_masters);
+ netdev_class_remove_file_ns(&bn->class_attr_bonding_masters, bn->net);
}
-/*
- * Initialize sysfs for each bond. This sets up and registers
+/* Initialize sysfs for each bond. This sets up and registers
* the 'bondctl' directory for each individual bond under /sys/class/net.
*/
void bond_prepare_sysfs_group(struct bonding *bond)