--- zzzz-none-000/linux-3.10.107/drivers/net/can/c_can/c_can.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/can/c_can/c_can.c 2021-02-04 17:41:59.000000000 +0000 @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -60,6 +61,8 @@ #define CONTROL_IE BIT(1) #define CONTROL_INIT BIT(0) +#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE) + /* test register */ #define TEST_RX BIT(7) #define TEST_TX1 BIT(6) @@ -108,21 +111,38 @@ #define IF_COMM_CONTROL BIT(4) #define IF_COMM_CLR_INT_PND BIT(3) #define IF_COMM_TXRQST BIT(2) +#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST #define IF_COMM_DATAA BIT(1) #define IF_COMM_DATAB BIT(0) -#define IF_COMM_ALL (IF_COMM_MASK | IF_COMM_ARB | \ - IF_COMM_CONTROL | IF_COMM_TXRQST | \ - IF_COMM_DATAA | IF_COMM_DATAB) + +/* TX buffer setup */ +#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \ + IF_COMM_TXRQST | \ + IF_COMM_DATAA | IF_COMM_DATAB) + +/* For the low buffers we clear the interrupt bit, but keep newdat */ +#define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \ + IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \ + IF_COMM_DATAA | IF_COMM_DATAB) + +/* For the high buffers we clear the interrupt bit and newdat */ +#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT) + + +/* Receive setup of message objects */ +#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL) + +/* Invalidation of message objects */ +#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL) /* IFx arbitration */ -#define IF_ARB_MSGVAL BIT(15) -#define IF_ARB_MSGXTD BIT(14) -#define IF_ARB_TRANSMIT BIT(13) +#define IF_ARB_MSGVAL BIT(31) +#define IF_ARB_MSGXTD BIT(30) +#define IF_ARB_TRANSMIT BIT(29) /* IFx message control */ #define IF_MCONT_NEWDAT BIT(15) #define IF_MCONT_MSGLST BIT(14) -#define IF_MCONT_CLR_MSGLST (0 << 14) #define IF_MCONT_INTPND BIT(13) #define IF_MCONT_UMASK BIT(12) #define IF_MCONT_TXIE BIT(11) @@ -132,39 +152,16 @@ #define IF_MCONT_EOB BIT(7) #define IF_MCONT_DLC_MASK 0xf +#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK) +#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB) + +#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB) + /* - * IFx register masks: - * allow easy operation on 16-bit registers when the - * argument is 32-bit instead + * Use IF1 for RX and IF2 for TX */ -#define IFX_WRITE_LOW_16BIT(x) ((x) & 0xFFFF) -#define IFX_WRITE_HIGH_16BIT(x) (((x) & 0xFFFF0000) >> 16) - -/* message object split */ -#define C_CAN_NO_OF_OBJECTS 32 -#define C_CAN_MSG_OBJ_RX_NUM 16 -#define C_CAN_MSG_OBJ_TX_NUM 16 - -#define C_CAN_MSG_OBJ_RX_FIRST 1 -#define C_CAN_MSG_OBJ_RX_LAST (C_CAN_MSG_OBJ_RX_FIRST + \ - C_CAN_MSG_OBJ_RX_NUM - 1) - -#define C_CAN_MSG_OBJ_TX_FIRST (C_CAN_MSG_OBJ_RX_LAST + 1) -#define C_CAN_MSG_OBJ_TX_LAST (C_CAN_MSG_OBJ_TX_FIRST + \ - C_CAN_MSG_OBJ_TX_NUM - 1) - -#define C_CAN_MSG_OBJ_RX_SPLIT 9 -#define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1) - -#define C_CAN_NEXT_MSG_OBJ_MASK (C_CAN_MSG_OBJ_TX_NUM - 1) -#define RECEIVE_OBJECT_BITS 0x0000ffff - -/* status interrupt */ -#define STATUS_INTERRUPT 0x8000 - -/* global interrupt masks */ -#define ENABLE_ALL_INTERRUPTS 1 -#define DISABLE_ALL_INTERRUPTS 0 +#define IF_RX 0 +#define IF_TX 1 /* minimum timeout for checking BUSY status */ #define MIN_TIMEOUT_VALUE 6 @@ -185,6 +182,7 @@ LEC_BIT0_ERROR, LEC_CRC_ERROR, LEC_UNUSED, + LEC_MASK = LEC_UNUSED, }; /* @@ -240,210 +238,163 @@ priv->raminit(priv, enable); } -static inline int get_tx_next_msg_obj(const struct c_can_priv *priv) -{ - return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) + - C_CAN_MSG_OBJ_TX_FIRST; -} - -static inline int get_tx_echo_msg_obj(const struct c_can_priv *priv) -{ - return (priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) + - C_CAN_MSG_OBJ_TX_FIRST; -} - -static u32 c_can_read_reg32(struct c_can_priv *priv, enum reg index) -{ - u32 val = priv->read_reg(priv, index); - val |= ((u32) priv->read_reg(priv, index + 1)) << 16; - return val; -} - -static void c_can_enable_all_interrupts(struct c_can_priv *priv, - int enable) +static void c_can_irq_control(struct c_can_priv *priv, bool enable) { - unsigned int cntrl_save = priv->read_reg(priv, - C_CAN_CTRL_REG); + u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK; if (enable) - cntrl_save |= (CONTROL_SIE | CONTROL_EIE | CONTROL_IE); - else - cntrl_save &= ~(CONTROL_EIE | CONTROL_IE | CONTROL_SIE); + ctrl |= CONTROL_IRQMSK; - priv->write_reg(priv, C_CAN_CTRL_REG, cntrl_save); + priv->write_reg(priv, C_CAN_CTRL_REG, ctrl); } -static inline int c_can_msg_obj_is_busy(struct c_can_priv *priv, int iface) +static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj) { - int count = MIN_TIMEOUT_VALUE; + struct c_can_priv *priv = netdev_priv(dev); + int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface); + + priv->write_reg32(priv, reg, (cmd << 16) | obj); - while (count && priv->read_reg(priv, - C_CAN_IFACE(COMREQ_REG, iface)) & - IF_COMR_BUSY) { - count--; + for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) { + if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY)) + return; udelay(1); } + netdev_err(dev, "Updating object timed out\n"); - if (!count) - return 1; +} - return 0; +static inline void c_can_object_get(struct net_device *dev, int iface, + u32 obj, u32 cmd) +{ + c_can_obj_update(dev, iface, cmd, obj); } -static inline void c_can_object_get(struct net_device *dev, - int iface, int objno, int mask) +static inline void c_can_object_put(struct net_device *dev, int iface, + u32 obj, u32 cmd) { - struct c_can_priv *priv = netdev_priv(dev); + c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); +} - /* - * As per specs, after writting the message object number in the - * IF command request register the transfer b/w interface - * register and message RAM must be complete in 6 CAN-CLK - * period. - */ - priv->write_reg(priv, C_CAN_IFACE(COMMSK_REG, iface), - IFX_WRITE_LOW_16BIT(mask)); - priv->write_reg(priv, C_CAN_IFACE(COMREQ_REG, iface), - IFX_WRITE_LOW_16BIT(objno)); +/* + * Note: According to documentation clearing TXIE while MSGVAL is set + * is not allowed, but works nicely on C/DCAN. And that lowers the I/O + * load significantly. + */ +static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj) +{ + struct c_can_priv *priv = netdev_priv(dev); - if (c_can_msg_obj_is_busy(priv, iface)) - netdev_err(dev, "timed out in object get\n"); + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); + c_can_object_put(dev, iface, obj, IF_COMM_INVAL); } -static inline void c_can_object_put(struct net_device *dev, - int iface, int objno, int mask) +static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) { struct c_can_priv *priv = netdev_priv(dev); - /* - * As per specs, after writting the message object number in the - * IF command request register the transfer b/w interface - * register and message RAM must be complete in 6 CAN-CLK - * period. - */ - priv->write_reg(priv, C_CAN_IFACE(COMMSK_REG, iface), - (IF_COMM_WR | IFX_WRITE_LOW_16BIT(mask))); - priv->write_reg(priv, C_CAN_IFACE(COMREQ_REG, iface), - IFX_WRITE_LOW_16BIT(objno)); - - if (c_can_msg_obj_is_busy(priv, iface)) - netdev_err(dev, "timed out in object put\n"); + priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0); + priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0); + c_can_inval_tx_object(dev, iface, obj); } -static void c_can_write_msg_object(struct net_device *dev, - int iface, struct can_frame *frame, int objno) +static void c_can_setup_tx_object(struct net_device *dev, int iface, + struct can_frame *frame, int idx) { - int i; - u16 flags = 0; - unsigned int id; struct c_can_priv *priv = netdev_priv(dev); - - if (!(frame->can_id & CAN_RTR_FLAG)) - flags |= IF_ARB_TRANSMIT; + u16 ctrl = IF_MCONT_TX | frame->can_dlc; + bool rtr = frame->can_id & CAN_RTR_FLAG; + u32 arb = IF_ARB_MSGVAL; + int i; if (frame->can_id & CAN_EFF_FLAG) { - id = frame->can_id & CAN_EFF_MASK; - flags |= IF_ARB_MSGXTD; - } else - id = ((frame->can_id & CAN_SFF_MASK) << 18); + arb |= frame->can_id & CAN_EFF_MASK; + arb |= IF_ARB_MSGXTD; + } else { + arb |= (frame->can_id & CAN_SFF_MASK) << 18; + } - flags |= IF_ARB_MSGVAL; + if (!rtr) + arb |= IF_ARB_TRANSMIT; - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), - IFX_WRITE_LOW_16BIT(id)); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), flags | - IFX_WRITE_HIGH_16BIT(id)); + /* + * If we change the DIR bit, we need to invalidate the buffer + * first, i.e. clear the MSGVAL flag in the arbiter. + */ + if (rtr != (bool)test_bit(idx, &priv->tx_dir)) { + u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST; - for (i = 0; i < frame->can_dlc; i += 2) { - priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, - frame->data[i] | (frame->data[i + 1] << 8)); + c_can_inval_msg_object(dev, iface, obj); + change_bit(idx, &priv->tx_dir); } - /* enable interrupt for this message object */ - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - IF_MCONT_TXIE | IF_MCONT_TXRQST | IF_MCONT_EOB | - frame->can_dlc); - c_can_object_put(dev, iface, objno, IF_COMM_ALL); -} + priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb); -static inline void c_can_mark_rx_msg_obj(struct net_device *dev, - int iface, int ctrl_mask, - int obj) -{ - struct c_can_priv *priv = netdev_priv(dev); + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - ctrl_mask & ~(IF_MCONT_MSGLST | IF_MCONT_INTPND)); - c_can_object_put(dev, iface, obj, IF_COMM_CONTROL); + if (priv->type == BOSCH_D_CAN) { + u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface); + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = (u32)frame->data[i]; + data |= (u32)frame->data[i + 1] << 8; + data |= (u32)frame->data[i + 2] << 16; + data |= (u32)frame->data[i + 3] << 24; + priv->write_reg32(priv, dreg, data); + } + } else { + for (i = 0; i < frame->can_dlc; i += 2) { + priv->write_reg(priv, + C_CAN_IFACE(DATA1_REG, iface) + i / 2, + frame->data[i] | + (frame->data[i + 1] << 8)); + } + } } static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev, - int iface, - int ctrl_mask) + int iface) { int i; - struct c_can_priv *priv = netdev_priv(dev); - for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) { - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - ctrl_mask & ~(IF_MCONT_MSGLST | - IF_MCONT_INTPND | IF_MCONT_NEWDAT)); - c_can_object_put(dev, iface, i, IF_COMM_CONTROL); - } + for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) + c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT); } -static inline void c_can_activate_rx_msg_obj(struct net_device *dev, - int iface, int ctrl_mask, - int obj) +static int c_can_handle_lost_msg_obj(struct net_device *dev, + int iface, int objno, u32 ctrl) { - struct c_can_priv *priv = netdev_priv(dev); - - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - ctrl_mask & ~(IF_MCONT_MSGLST | - IF_MCONT_INTPND | IF_MCONT_NEWDAT)); - c_can_object_put(dev, iface, obj, IF_COMM_CONTROL); -} - -static void c_can_handle_lost_msg_obj(struct net_device *dev, - int iface, int objno) -{ - struct c_can_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - struct sk_buff *skb; + struct c_can_priv *priv = netdev_priv(dev); struct can_frame *frame; + struct sk_buff *skb; - netdev_err(dev, "msg lost in buffer %d\n", objno); - - c_can_object_get(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST); - - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), - IF_MCONT_CLR_MSGLST); + ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT); + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); + c_can_object_put(dev, iface, objno, IF_COMM_CONTROL); - c_can_object_put(dev, 0, objno, IF_COMM_CONTROL); + stats->rx_errors++; + stats->rx_over_errors++; /* create an error msg */ skb = alloc_can_err_skb(dev, &frame); if (unlikely(!skb)) - return; + return 0; frame->can_id |= CAN_ERR_CRTL; frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; - stats->rx_errors++; - stats->rx_over_errors++; netif_receive_skb(skb); + return 1; } -static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) +static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) { - u16 flags, data; - int i; - unsigned int val; - struct c_can_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - struct sk_buff *skb; + struct c_can_priv *priv = netdev_priv(dev); struct can_frame *frame; + struct sk_buff *skb; + u32 arb, data; skb = alloc_can_skb(dev, &frame); if (!skb) { @@ -453,119 +404,108 @@ frame->can_dlc = get_can_dlc(ctrl & 0x0F); - flags = priv->read_reg(priv, C_CAN_IFACE(ARB2_REG, iface)); - val = priv->read_reg(priv, C_CAN_IFACE(ARB1_REG, iface)) | - (flags << 16); + arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface)); - if (flags & IF_ARB_MSGXTD) - frame->can_id = (val & CAN_EFF_MASK) | CAN_EFF_FLAG; + if (arb & IF_ARB_MSGXTD) + frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG; else - frame->can_id = (val >> 18) & CAN_SFF_MASK; + frame->can_id = (arb >> 18) & CAN_SFF_MASK; - if (flags & IF_ARB_TRANSMIT) + if (arb & IF_ARB_TRANSMIT) { frame->can_id |= CAN_RTR_FLAG; - else { - for (i = 0; i < frame->can_dlc; i += 2) { - data = priv->read_reg(priv, - C_CAN_IFACE(DATA1_REG, iface) + i / 2); - frame->data[i] = data; - frame->data[i + 1] = data >> 8; + } else { + int i, dreg = C_CAN_IFACE(DATA1_REG, iface); + + if (priv->type == BOSCH_D_CAN) { + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = priv->read_reg32(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + frame->data[i + 2] = data >> 16; + frame->data[i + 3] = data >> 24; + } + } else { + for (i = 0; i < frame->can_dlc; i += 2, dreg++) { + data = priv->read_reg(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + } } } - netif_receive_skb(skb); - stats->rx_packets++; stats->rx_bytes += frame->can_dlc; - can_led_event(dev, CAN_LED_EVENT_RX); - + netif_receive_skb(skb); return 0; } static void c_can_setup_receive_object(struct net_device *dev, int iface, - int objno, unsigned int mask, - unsigned int id, unsigned int mcont) + u32 obj, u32 mask, u32 id, u32 mcont) { struct c_can_priv *priv = netdev_priv(dev); - priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), - IFX_WRITE_LOW_16BIT(mask)); + mask |= BIT(29); + priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask); - /* According to C_CAN documentation, the reserved bit - * in IFx_MASK2 register is fixed 1 - */ - priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), - IFX_WRITE_HIGH_16BIT(mask) | BIT(13)); - - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), - IFX_WRITE_LOW_16BIT(id)); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), - (IF_ARB_MSGVAL | IFX_WRITE_HIGH_16BIT(id))); + id |= IF_ARB_MSGVAL; + priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id); priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont); - c_can_object_put(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST); - - netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, - c_can_read_reg32(priv, C_CAN_MSGVAL1_REG)); -} - -static void c_can_inval_msg_object(struct net_device *dev, int iface, int objno) -{ - struct c_can_priv *priv = netdev_priv(dev); - - priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0); - priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0); - priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); - - c_can_object_put(dev, iface, objno, IF_COMM_ARB | IF_COMM_CONTROL); - - netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, - c_can_read_reg32(priv, C_CAN_MSGVAL1_REG)); -} - -static inline int c_can_is_next_tx_obj_busy(struct c_can_priv *priv, int objno) -{ - int val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG); - - /* - * as transmission request register's bit n-1 corresponds to - * message object n, we need to handle the same properly. - */ - if (val & (1 << (objno - 1))) - return 1; - - return 0; + c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP); } static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, - struct net_device *dev) + struct net_device *dev) { - u32 msg_obj_no; - struct c_can_priv *priv = netdev_priv(dev); struct can_frame *frame = (struct can_frame *)skb->data; + struct c_can_priv *priv = netdev_priv(dev); + u32 idx, obj; if (can_dropped_invalid_skb(dev, skb)) return NETDEV_TX_OK; - - msg_obj_no = get_tx_next_msg_obj(priv); - - /* prepare message object for transmission */ - c_can_write_msg_object(dev, 0, frame, msg_obj_no); - can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); - /* - * we have to stop the queue in case of a wrap around or - * if the next TX message object is still in use + * This is not a FIFO. C/D_CAN sends out the buffers + * prioritized. The lowest buffer number wins. */ - priv->tx_next++; - if (c_can_is_next_tx_obj_busy(priv, get_tx_next_msg_obj(priv)) || - (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) == 0) + idx = fls(atomic_read(&priv->tx_active)); + obj = idx + C_CAN_MSG_OBJ_TX_FIRST; + + /* If this is the last buffer, stop the xmit queue */ + if (idx == C_CAN_MSG_OBJ_TX_NUM - 1) netif_stop_queue(dev); + /* + * Store the message in the interface so we can call + * can_put_echo_skb(). We must do this before we enable + * transmit as we might race against do_tx(). + */ + c_can_setup_tx_object(dev, IF_TX, frame, idx); + priv->dlc[idx] = frame->can_dlc; + can_put_echo_skb(skb, dev, idx); + + /* Update the active bits */ + atomic_add((1 << idx), &priv->tx_active); + /* Start transmission */ + c_can_object_put(dev, IF_TX, obj, IF_COMM_TX); return NETDEV_TX_OK; } +static int c_can_wait_for_ctrl_init(struct net_device *dev, + struct c_can_priv *priv, u32 init) +{ + int retry = 0; + + while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) { + udelay(10); + if (retry++ > 1000) { + netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n"); + return -EIO; + } + } + return 0; +} + static int c_can_set_bittiming(struct net_device *dev) { unsigned int reg_btr, reg_brpe, ctrl_save; @@ -573,6 +513,7 @@ u32 ten_bit_brp; struct c_can_priv *priv = netdev_priv(dev); const struct can_bittiming *bt = &priv->can.bittiming; + int res; /* c_can provides a 6-bit brp and 4-bit brpe fields */ ten_bit_brp = bt->brp - 1; @@ -590,13 +531,17 @@ "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe); ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG); - priv->write_reg(priv, C_CAN_CTRL_REG, - ctrl_save | CONTROL_CCE | CONTROL_INIT); + ctrl_save &= ~CONTROL_INIT; + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT); + res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT); + if (res) + return res; + priv->write_reg(priv, C_CAN_BTR_REG, reg_btr); priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe); priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save); - return 0; + return c_can_wait_for_ctrl_init(dev, priv, 0); } /* @@ -614,15 +559,14 @@ /* first invalidate all message objects */ for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++) - c_can_inval_msg_object(dev, 0, i); + c_can_inval_msg_object(dev, IF_RX, i); /* setup receive message objects */ for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++) - c_can_setup_receive_object(dev, 0, i, 0, 0, - (IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB); + c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV); - c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST, 0, 0, - IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK); + c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0, + IF_MCONT_RCV_EOB); } /* @@ -631,35 +575,27 @@ * - set operating mode * - configure message objects */ -static void c_can_chip_config(struct net_device *dev) +static int c_can_chip_config(struct net_device *dev) { struct c_can_priv *priv = netdev_priv(dev); /* enable automatic retransmission */ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_ENABLE_AR); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR); if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); - priv->write_reg(priv, C_CAN_TEST_REG, - TEST_LBACK | TEST_SILENT); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { /* loopback mode : useful for self-test function */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { /* silent mode : bus-monitoring mode */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT); - } else - /* normal mode*/ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_EIE | CONTROL_SIE | CONTROL_IE); + } /* configure message objects */ c_can_configure_msg_objects(dev); @@ -667,43 +603,68 @@ /* set a `lec` value so that we can check for updates later */ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + /* Clear all internal status */ + atomic_set(&priv->tx_active, 0); + priv->rxmasked = 0; + priv->tx_dir = 0; + /* set bittiming params */ - c_can_set_bittiming(dev); + return c_can_set_bittiming(dev); } -static void c_can_start(struct net_device *dev) +static int c_can_start(struct net_device *dev) { struct c_can_priv *priv = netdev_priv(dev); + int err; + struct pinctrl *p; /* basic c_can configuration */ - c_can_chip_config(dev); + err = c_can_chip_config(dev); + if (err) + return err; + + /* Setup the command for new messages */ + priv->comm_rcv_high = priv->type != BOSCH_D_CAN ? + IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH; priv->can.state = CAN_STATE_ERROR_ACTIVE; - /* reset tx helper pointers */ - priv->tx_next = priv->tx_echo = 0; + /* Attempt to use "active" if available else use "default" */ + p = pinctrl_get_select(priv->device, "active"); + if (!IS_ERR(p)) + pinctrl_put(p); + else + pinctrl_pm_select_default_state(priv->device); - /* enable status change, error and module interrupts */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + return 0; } static void c_can_stop(struct net_device *dev) { struct c_can_priv *priv = netdev_priv(dev); - /* disable all interrupts */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, false); - /* set the state as STOPPED */ + /* put ctrl to init on stop to end ongoing transmission */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT); + + /* deactivate pins */ + pinctrl_pm_select_sleep_state(dev->dev.parent); priv->can.state = CAN_STATE_STOPPED; } static int c_can_set_mode(struct net_device *dev, enum can_mode mode) { + struct c_can_priv *priv = netdev_priv(dev); + int err; + switch (mode) { case CAN_MODE_START: - c_can_start(dev); + err = c_can_start(dev); + if (err) + return err; netif_wake_queue(dev); + c_can_irq_control(priv, true); break; default: return -EOPNOTSUPP; @@ -739,45 +700,126 @@ return err; } -/* - * theory of operation: - * - * priv->tx_echo holds the number of the oldest can_frame put for - * transmission into the hardware, but not yet ACKed by the CAN tx - * complete IRQ. - * - * We iterate from priv->tx_echo to priv->tx_next and check if the - * packet has been transmitted, echo it back to the CAN framework. - * If we discover a not yet transmitted packet, stop looking for more. - */ static void c_can_do_tx(struct net_device *dev) { - u32 val; - u32 msg_obj_no; struct c_can_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; + u32 idx, obj, pkts = 0, bytes = 0, pend, clr; - for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { - msg_obj_no = get_tx_echo_msg_obj(priv); - val = c_can_read_reg32(priv, C_CAN_TXRQST1_REG); - if (!(val & (1 << (msg_obj_no - 1)))) { - can_get_echo_skb(dev, - msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); - stats->tx_bytes += priv->read_reg(priv, - C_CAN_IFACE(MSGCTRL_REG, 0)) - & IF_MCONT_DLC_MASK; - stats->tx_packets++; - can_led_event(dev, CAN_LED_EVENT_TX); - c_can_inval_msg_object(dev, 0, msg_obj_no); - } else { - break; - } + clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG); + + while ((idx = ffs(pend))) { + idx--; + pend &= ~(1 << idx); + obj = idx + C_CAN_MSG_OBJ_TX_FIRST; + c_can_inval_tx_object(dev, IF_RX, obj); + can_get_echo_skb(dev, idx); + bytes += priv->dlc[idx]; + pkts++; } - /* restart queue if wrap-up or if queue stalled on last pkt */ - if (((priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) != 0) || - ((priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) == 0)) + /* Clear the bits in the tx_active mask */ + atomic_sub(clr, &priv->tx_active); + + if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1))) netif_wake_queue(dev); + + if (pkts) { + stats->tx_bytes += bytes; + stats->tx_packets += pkts; + can_led_event(dev, CAN_LED_EVENT_TX); + } +} + +/* + * If we have a gap in the pending bits, that means we either + * raced with the hardware or failed to readout all upper + * objects in the last run due to quota limit. + */ +static u32 c_can_adjust_pending(u32 pend) +{ + u32 weight, lasts; + + if (pend == RECEIVE_OBJECT_BITS) + return pend; + + /* + * If the last set bit is larger than the number of pending + * bits we have a gap. + */ + weight = hweight32(pend); + lasts = fls(pend); + + /* If the bits are linear, nothing to do */ + if (lasts == weight) + return pend; + + /* + * Find the first set bit after the gap. We walk backwards + * from the last set bit. + */ + for (lasts--; pend & (1 << (lasts - 1)); lasts--); + + return pend & ~((1 << lasts) - 1); +} + +static inline void c_can_rx_object_get(struct net_device *dev, + struct c_can_priv *priv, u32 obj) +{ + c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high); +} + +static inline void c_can_rx_finalize(struct net_device *dev, + struct c_can_priv *priv, u32 obj) +{ + if (priv->type != BOSCH_D_CAN) + c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT); +} + +static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, + u32 pend, int quota) +{ + u32 pkts = 0, ctrl, obj; + + while ((obj = ffs(pend)) && quota > 0) { + pend &= ~BIT(obj - 1); + + c_can_rx_object_get(dev, priv, obj); + ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX)); + + if (ctrl & IF_MCONT_MSGLST) { + int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl); + + pkts += n; + quota -= n; + continue; + } + + /* + * This really should not happen, but this covers some + * odd HW behaviour. Do not remove that unless you + * want to brick your machine. + */ + if (!(ctrl & IF_MCONT_NEWDAT)) + continue; + + /* read the data from the message object */ + c_can_read_msg_object(dev, IF_RX, ctrl); + + c_can_rx_finalize(dev, priv, obj); + + pkts++; + quota--; + } + + return pkts; +} + +static inline u32 c_can_get_pending(struct c_can_priv *priv) +{ + u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); + + return pend; } /* @@ -789,80 +831,47 @@ * has arrived. To work-around this issue, we keep two groups of message * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT. * - * To ensure in-order frame reception we use the following - * approach while re-activating a message object to receive further - * frames: - * - if the current message object number is lower than - * C_CAN_MSG_RX_LOW_LAST, do not clear the NEWDAT bit while clearing - * the INTPND bit. - * - if the current message object number is equal to - * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of all lower - * receive message objects. - * - if the current message object number is greater than - * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of - * only this message object. + * We clear the newdat bit right away. + * + * This can result in packet reordering when the readout is slow. */ static int c_can_do_rx_poll(struct net_device *dev, int quota) { - u32 num_rx_pkts = 0; - unsigned int msg_obj, msg_ctrl_save; struct c_can_priv *priv = netdev_priv(dev); - u32 val = c_can_read_reg32(priv, C_CAN_INTPND1_REG); + u32 pkts = 0, pend = 0, toread, n; - for (msg_obj = C_CAN_MSG_OBJ_RX_FIRST; - msg_obj <= C_CAN_MSG_OBJ_RX_LAST && quota > 0; - val = c_can_read_reg32(priv, C_CAN_INTPND1_REG), - msg_obj++) { - /* - * as interrupt pending register's bit n-1 corresponds to - * message object n, we need to handle the same properly. - */ - if (val & (1 << (msg_obj - 1))) { - c_can_object_get(dev, 0, msg_obj, IF_COMM_ALL & - ~IF_COMM_TXRQST); - msg_ctrl_save = priv->read_reg(priv, - C_CAN_IFACE(MSGCTRL_REG, 0)); - - if (msg_ctrl_save & IF_MCONT_MSGLST) { - c_can_handle_lost_msg_obj(dev, 0, msg_obj); - num_rx_pkts++; - quota--; - continue; - } - - if (msg_ctrl_save & IF_MCONT_EOB) - return num_rx_pkts; - - if (!(msg_ctrl_save & IF_MCONT_NEWDAT)) - continue; - - /* read the data from the message object */ - c_can_read_msg_object(dev, 0, msg_ctrl_save); - - if (msg_obj < C_CAN_MSG_RX_LOW_LAST) - c_can_mark_rx_msg_obj(dev, 0, - msg_ctrl_save, msg_obj); - else if (msg_obj > C_CAN_MSG_RX_LOW_LAST) - /* activate this msg obj */ - c_can_activate_rx_msg_obj(dev, 0, - msg_ctrl_save, msg_obj); - else if (msg_obj == C_CAN_MSG_RX_LOW_LAST) - /* activate all lower message objects */ - c_can_activate_all_lower_rx_msg_obj(dev, - 0, msg_ctrl_save); + /* + * It is faster to read only one 16bit register. This is only possible + * for a maximum number of 16 objects. + */ + BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16, + "Implementation does not support more message objects than 16"); - num_rx_pkts++; - quota--; + while (quota > 0) { + if (!pend) { + pend = c_can_get_pending(priv); + if (!pend) + break; + /* + * If the pending field has a gap, handle the + * bits above the gap first. + */ + toread = c_can_adjust_pending(pend); + } else { + toread = pend; } + /* Remove the bits from pend */ + pend &= ~toread; + /* Read the objects */ + n = c_can_read_objects(dev, priv, toread, quota); + pkts += n; + quota -= n; } - return num_rx_pkts; -} + if (pkts) + can_led_event(dev, CAN_LED_EVENT_RX); -static inline int c_can_has_and_handle_berr(struct c_can_priv *priv) -{ - return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) && - (priv->current_status & LEC_UNUSED); + return pkts; } static int c_can_handle_state_change(struct net_device *dev, @@ -876,6 +885,26 @@ struct sk_buff *skb; struct can_berr_counter bec; + switch (error_type) { + case C_CAN_ERROR_WARNING: + /* error warning state */ + priv->can.can_stats.error_warning++; + priv->can.state = CAN_STATE_ERROR_WARNING; + break; + case C_CAN_ERROR_PASSIVE: + /* error passive state */ + priv->can.can_stats.error_passive++; + priv->can.state = CAN_STATE_ERROR_PASSIVE; + break; + case C_CAN_BUS_OFF: + /* bus-off state */ + priv->can.state = CAN_STATE_BUS_OFF; + priv->can.can_stats.bus_off++; + break; + default: + break; + } + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -889,8 +918,6 @@ switch (error_type) { case C_CAN_ERROR_WARNING: /* error warning state */ - priv->can.can_stats.error_warning++; - priv->can.state = CAN_STATE_ERROR_WARNING; cf->can_id |= CAN_ERR_CRTL; cf->data[1] = (bec.txerr > bec.rxerr) ? CAN_ERR_CRTL_TX_WARNING : @@ -901,8 +928,6 @@ break; case C_CAN_ERROR_PASSIVE: /* error passive state */ - priv->can.can_stats.error_passive++; - priv->can.state = CAN_STATE_ERROR_PASSIVE; cf->can_id |= CAN_ERR_CRTL; if (rx_err_passive) cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; @@ -914,22 +939,16 @@ break; case C_CAN_BUS_OFF: /* bus-off state */ - priv->can.state = CAN_STATE_BUS_OFF; cf->can_id |= CAN_ERR_BUSOFF; - /* - * disable all interrupts in bus-off mode to ensure that - * the CPU is not hogged down - */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); can_bus_off(dev); break; default: break; } - netif_receive_skb(skb); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + netif_receive_skb(skb); return 1; } @@ -950,6 +969,13 @@ if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR) return 0; + if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) + return 0; + + /* common for all type of bus errors */ + priv->can.can_stats.bus_error++; + stats->rx_errors++; + /* propagate the error condition to the CAN stack */ skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -959,12 +985,7 @@ * check for 'last error code' which tells us the * type of the last error to occur on the CAN bus */ - - /* common for all type of bus errors */ - priv->can.can_stats.bus_error++; - stats->rx_errors++; cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; - cf->data[2] |= CAN_ERR_PROT_UNSPEC; switch (lec_type) { case LEC_STUFF_ERROR: @@ -977,8 +998,7 @@ break; case LEC_ACK_ERROR: netdev_dbg(dev, "ack error\n"); - cf->data[3] |= (CAN_ERR_PROT_LOC_ACK | - CAN_ERR_PROT_LOC_ACK_DEL); + cf->data[3] = CAN_ERR_PROT_LOC_ACK; break; case LEC_BIT1_ERROR: netdev_dbg(dev, "bit1 error\n"); @@ -990,102 +1010,70 @@ break; case LEC_CRC_ERROR: netdev_dbg(dev, "CRC error\n"); - cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ | - CAN_ERR_PROT_LOC_CRC_DEL); + cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; break; default: break; } - /* set a `lec` value so that we can check for updates later */ - priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); - - netif_receive_skb(skb); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; - + netif_receive_skb(skb); return 1; } static int c_can_poll(struct napi_struct *napi, int quota) { - u16 irqstatus; - int lec_type = 0; - int work_done = 0; struct net_device *dev = napi->dev; struct c_can_priv *priv = netdev_priv(dev); + u16 curr, last = priv->last_status; + int work_done = 0; - irqstatus = priv->irqstatus; - if (!irqstatus) - goto end; - - /* status events have the highest priority */ - if (irqstatus == STATUS_INTERRUPT) { - priv->current_status = priv->read_reg(priv, - C_CAN_STS_REG); - - /* handle Tx/Rx events */ - if (priv->current_status & STATUS_TXOK) - priv->write_reg(priv, C_CAN_STS_REG, - priv->current_status & ~STATUS_TXOK); - - if (priv->current_status & STATUS_RXOK) - priv->write_reg(priv, C_CAN_STS_REG, - priv->current_status & ~STATUS_RXOK); - - /* handle state changes */ - if ((priv->current_status & STATUS_EWARN) && - (!(priv->last_status & STATUS_EWARN))) { - netdev_dbg(dev, "entered error warning state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_ERROR_WARNING); - } - if ((priv->current_status & STATUS_EPASS) && - (!(priv->last_status & STATUS_EPASS))) { - netdev_dbg(dev, "entered error passive state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_ERROR_PASSIVE); - } - if ((priv->current_status & STATUS_BOFF) && - (!(priv->last_status & STATUS_BOFF))) { - netdev_dbg(dev, "entered bus off state\n"); - work_done += c_can_handle_state_change(dev, - C_CAN_BUS_OFF); - } + priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG); + /* Ack status on C_CAN. D_CAN is self clearing */ + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + + /* handle state changes */ + if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) { + netdev_dbg(dev, "entered error warning state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING); + } - /* handle bus recovery events */ - if ((!(priv->current_status & STATUS_BOFF)) && - (priv->last_status & STATUS_BOFF)) { - netdev_dbg(dev, "left bus off state\n"); - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } - if ((!(priv->current_status & STATUS_EPASS)) && - (priv->last_status & STATUS_EPASS)) { - netdev_dbg(dev, "left error passive state\n"); - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } + if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) { + netdev_dbg(dev, "entered error passive state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE); + } - priv->last_status = priv->current_status; + if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) { + netdev_dbg(dev, "entered bus off state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF); + goto end; + } - /* handle lec errors on the bus */ - lec_type = c_can_has_and_handle_berr(priv); - if (lec_type) - work_done += c_can_handle_bus_err(dev, lec_type); - } else if ((irqstatus >= C_CAN_MSG_OBJ_RX_FIRST) && - (irqstatus <= C_CAN_MSG_OBJ_RX_LAST)) { - /* handle events corresponding to receive message objects */ - work_done += c_can_do_rx_poll(dev, (quota - work_done)); - } else if ((irqstatus >= C_CAN_MSG_OBJ_TX_FIRST) && - (irqstatus <= C_CAN_MSG_OBJ_TX_LAST)) { - /* handle events corresponding to transmit message objects */ - c_can_do_tx(dev); + /* handle bus recovery events */ + if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) { + netdev_dbg(dev, "left bus off state\n"); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + } + if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) { + netdev_dbg(dev, "left error passive state\n"); + priv->can.state = CAN_STATE_ERROR_ACTIVE; } + /* handle lec errors on the bus */ + work_done += c_can_handle_bus_err(dev, curr & LEC_MASK); + + /* Handle Tx/Rx events. We do this unconditionally */ + work_done += c_can_do_rx_poll(dev, (quota - work_done)); + c_can_do_tx(dev); + end: if (work_done < quota) { napi_complete(napi); - /* enable all IRQs */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + /* enable all IRQs if we are not in bus off state */ + if (priv->can.state != CAN_STATE_BUS_OFF) + c_can_irq_control(priv, true); } return work_done; @@ -1096,12 +1084,11 @@ struct net_device *dev = (struct net_device *)dev_id; struct c_can_priv *priv = netdev_priv(dev); - priv->irqstatus = priv->read_reg(priv, C_CAN_INT_REG); - if (!priv->irqstatus) + if (!priv->read_reg(priv, C_CAN_INT_REG)) return IRQ_NONE; /* disable all interrupts and schedule the NAPI */ - c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); + c_can_irq_control(priv, false); napi_schedule(&priv->napi); return IRQ_HANDLED; @@ -1130,17 +1117,22 @@ goto exit_irq_fail; } - napi_enable(&priv->napi); + /* start the c_can controller */ + err = c_can_start(dev); + if (err) + goto exit_start_fail; can_led_event(dev, CAN_LED_EVENT_OPEN); - /* start the c_can controller */ - c_can_start(dev); - + napi_enable(&priv->napi); + /* enable status change, error and module interrupts */ + c_can_irq_control(priv, true); netif_start_queue(dev); return 0; +exit_start_fail: + free_irq(dev->irq, dev); exit_irq_fail: close_candev(dev); exit_open_fail: @@ -1231,6 +1223,7 @@ u32 val; unsigned long time_out; struct c_can_priv *priv = netdev_priv(dev); + int ret; if (!(dev->flags & IFF_UP)) return 0; @@ -1257,15 +1250,20 @@ if (time_after(jiffies, time_out)) return -ETIMEDOUT; - c_can_start(dev); + ret = c_can_start(dev); + if (!ret) + c_can_irq_control(priv, true); - return 0; + return ret; } EXPORT_SYMBOL_GPL(c_can_power_up); #endif void free_c_can_dev(struct net_device *dev) { + struct c_can_priv *priv = netdev_priv(dev); + + netif_napi_del(&priv->napi); free_candev(dev); } EXPORT_SYMBOL_GPL(free_c_can_dev); @@ -1274,6 +1272,7 @@ .ndo_open = c_can_open, .ndo_stop = c_can_close, .ndo_start_xmit = c_can_start_xmit, + .ndo_change_mtu = can_change_mtu, }; int register_c_can_dev(struct net_device *dev) @@ -1281,6 +1280,13 @@ struct c_can_priv *priv = netdev_priv(dev); int err; + /* Deactivate pins to prevent DRA7 DCAN IP from being + * stuck in transition when module is disabled. + * Pins are activated in c_can_start() and deactivated + * in c_can_stop() + */ + pinctrl_pm_select_sleep_state(dev->dev.parent); + c_can_pm_runtime_enable(priv); dev->flags |= IFF_ECHO; /* we support local echo */