--- zzzz-none-000/linux-3.10.107/drivers/net/can/cc770/cc770.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/can/cc770/cc770.c	2021-02-04 17:41:59.000000000 +0000
@@ -60,7 +60,7 @@
  *
  * The message objects 1..14 can be used for TX and RX while the message
  * objects 15 is optimized for RX. It has a shadow register for reliable
- * data receiption under heavy bus load. Therefore it makes sense to use
+ * data reception under heavy bus load. Therefore it makes sense to use
  * this message object for the needed use case. The frame type (EFF/SFF)
  * for the message object 15 can be defined via kernel module parameter
  * "msgobj15_eff". If not equal 0, it will receive 29-bit EFF frames,
@@ -504,10 +504,10 @@
 		for (i = 0; i < cf->can_dlc; i++)
 			cf->data[i] = cc770_read_reg(priv, msgobj[mo].data[i]);
 	}
-	netif_rx(skb);
 
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
+	netif_rx(skb);
 }
 
 static int cc770_err(struct net_device *dev, u8 status)
@@ -535,6 +535,7 @@
 		cc770_write_reg(priv, control, CTRL_INI);
 		cf->can_id |= CAN_ERR_BUSOFF;
 		priv->can.state = CAN_STATE_BUS_OFF;
+		priv->can.can_stats.bus_off++;
 		can_bus_off(dev);
 	} else if (status & STAT_WARN) {
 		cf->can_id |= CAN_ERR_CRTL;
@@ -577,16 +578,16 @@
 				cf->data[2] |= CAN_ERR_PROT_BIT0;
 				break;
 			case STAT_LEC_CRC:
-				cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+				cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
 				break;
 			}
 		}
 	}
 
-	netif_rx(skb);
 
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
+	netif_rx(skb);
 
 	return 0;
 }
@@ -823,6 +824,7 @@
 	.ndo_open = cc770_open,
 	.ndo_stop = cc770_close,
 	.ndo_start_xmit = cc770_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 int register_cc770dev(struct net_device *dev)