--- zzzz-none-000/linux-3.10.107/drivers/net/ethernet/8390/smc-ultra.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/ethernet/8390/smc-ultra.c	2021-02-04 17:41:59.000000000 +0000
@@ -111,6 +111,7 @@
 MODULE_DEVICE_TABLE(isapnp, ultra_device_ids);
 #endif
 
+static u32 ultra_msg_enable;
 
 #define START_PG		0x00	/* First page of TX buffer */
 
@@ -211,6 +212,7 @@
 	unsigned char num_pages, irqreg, addr, piomode;
 	unsigned char idreg = inb(ioaddr + 7);
 	unsigned char reg4 = inb(ioaddr + 4) & 0x7f;
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME))
 		return -EBUSY;
@@ -232,16 +234,16 @@
 		goto out;
 	}
 
-	if (ei_debug  &&  version_printed++ == 0)
-		printk(version);
+	if ((ultra_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0))
+		netdev_info(dev, version);
 
 	model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ";
 
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(ioaddr + 8 + i);
 
-	printk("%s: %s at %#3x, %pM", dev->name, model_name,
-	       ioaddr, dev->dev_addr);
+	netdev_info(dev, "%s at %#3x, %pM", model_name,
+		    ioaddr, dev->dev_addr);
 
 	/* Switch from the station address to the alternate register set and
 	   read the useful registers there. */
@@ -265,7 +267,7 @@
 		irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];
 
 		if (irq == 0) {
-			printk(", failed to detect IRQ line.\n");
+			pr_cont(", failed to detect IRQ line.\n");
 			retval =  -EAGAIN;
 			goto out;
 		}
@@ -296,7 +298,7 @@
 
 	ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256);
 	if (!ei_status.mem) {
-		printk(", failed to ioremap.\n");
+		pr_cont(", failed to ioremap.\n");
 		retval =  -ENOMEM;
 		goto out;
 	}
@@ -304,14 +306,15 @@
 	dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256;
 
 	if (piomode) {
-		printk(",%s IRQ %d programmed-I/O mode.\n",
-			   eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
+		pr_cont(", %s IRQ %d programmed-I/O mode.\n",
+			eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
 		ei_status.block_input = &ultra_pio_input;
 		ei_status.block_output = &ultra_pio_output;
 		ei_status.get_8390_hdr = &ultra_pio_get_hdr;
 	} else {
-		printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
-			   dev->irq, dev->mem_start, dev->mem_end-1);
+		pr_cont(", %s IRQ %d memory %#lx-%#lx.\n",
+			eeprom_irq ? "" : "assigned ", dev->irq, dev->mem_start,
+			dev->mem_end-1);
 		ei_status.block_input = &ultra_block_input;
 		ei_status.block_output = &ultra_block_output;
 		ei_status.get_8390_hdr = &ultra_get_8390_hdr;
@@ -320,6 +323,7 @@
 
 	dev->netdev_ops = &ultra_netdev_ops;
 	NS8390_init(dev, 0);
+	ei_local->msg_enable = ultra_msg_enable;
 
 	retval = register_netdev(dev);
 	if (retval)
@@ -356,12 +360,15 @@
                         /* found it */
 			dev->base_addr = pnp_port_start(idev, 0);
 			dev->irq = pnp_irq(idev, 0);
-                        printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
-                                (char *) ultra_device_ids[i].driver_data,
-                                dev->base_addr, dev->irq);
+			netdev_info(dev,
+				    "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
+				    (char *) ultra_device_ids[i].driver_data,
+				    dev->base_addr, dev->irq);
                         if (ultra_probe1(dev, dev->base_addr) != 0) {      /* Shouldn't happen. */
-                                printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr);
-                                pnp_device_detach(idev);
+				netdev_err(dev,
+					   "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n",
+					   dev->base_addr);
+				pnp_device_detach(idev);
 				return -ENXIO;
                         }
                         ei_status.priv = (unsigned long)idev;
@@ -412,9 +419,10 @@
 ultra_reset_8390(struct net_device *dev)
 {
 	int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	outb(ULTRA_RESET, cmd_port);
-	if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
+	netif_dbg(ei_local, hw, dev, "resetting Ultra, t=%ld...\n", jiffies);
 	ei_status.txing = 0;
 
 	outb(0x00, cmd_port);	/* Disable shared memory for safety. */
@@ -424,7 +432,7 @@
 	else
 		outb(0x01, cmd_port + 6);		/* Enable interrupts and memory. */
 
-	if (ei_debug > 1) printk("reset done\n");
+	netif_dbg(ei_local, hw, dev, "reset done\n");
 }
 
 /* Grab the 8390 specific header. Similar to the block_input routine, but
@@ -530,11 +538,11 @@
 ultra_close_card(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	netif_stop_queue(dev);
 
-	if (ei_debug > 1)
-		printk("%s: Shutting down ethercard.\n", dev->name);
+	netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n");
 
 	outb(0x00, ioaddr + 6);		/* Disable interrupts. */
 	free_irq(dev->irq, dev);
@@ -556,8 +564,10 @@
 
 module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
+module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
 MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver");
 MODULE_LICENSE("GPL");