--- zzzz-none-000/linux-3.10.107/drivers/net/ethernet/amd/7990.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/ethernet/amd/7990.h	2021-02-04 17:41:59.000000000 +0000
@@ -35,33 +35,32 @@
 #define LANCE_LOG_RX_BUFFERS 3
 #endif
 
-#define TX_RING_SIZE (1<<LANCE_LOG_TX_BUFFERS)
-#define RX_RING_SIZE (1<<LANCE_LOG_RX_BUFFERS)
-#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
-#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
-#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29)
-#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29)
-#define PKT_BUFF_SIZE (1544)
-#define RX_BUFF_SIZE PKT_BUFF_SIZE
-#define TX_BUFF_SIZE PKT_BUFF_SIZE
+#define TX_RING_SIZE		(1 << LANCE_LOG_TX_BUFFERS)
+#define RX_RING_SIZE		(1 << LANCE_LOG_RX_BUFFERS)
+#define TX_RING_MOD_MASK	(TX_RING_SIZE - 1)
+#define RX_RING_MOD_MASK	(RX_RING_SIZE - 1)
+#define TX_RING_LEN_BITS	((LANCE_LOG_TX_BUFFERS) << 29)
+#define RX_RING_LEN_BITS	((LANCE_LOG_RX_BUFFERS) << 29)
+#define PKT_BUFF_SIZE		(1544)
+#define RX_BUFF_SIZE		PKT_BUFF_SIZE
+#define TX_BUFF_SIZE		PKT_BUFF_SIZE
 
 /* Each receive buffer is described by a receive message descriptor (RMD) */
 struct lance_rx_desc {
-	volatile unsigned short rmd0;        /* low address of packet */
-	volatile unsigned char  rmd1_bits;   /* descriptor bits */
-	volatile unsigned char  rmd1_hadr;   /* high address of packet */
-	volatile short    length;    	    /* This length is 2s complement (negative)!
-				     * Buffer length
-				     */
-	volatile unsigned short mblength;    /* Actual number of bytes received */
+	volatile unsigned short rmd0;	    /* low address of packet */
+	volatile unsigned char  rmd1_bits;  /* descriptor bits */
+	volatile unsigned char  rmd1_hadr;  /* high address of packet */
+	volatile short    length;	    /* This length is 2s complement (negative)!
+					     * Buffer length */
+	volatile unsigned short mblength;   /* Actual number of bytes received */
 };
 
 /* Ditto for TMD: */
 struct lance_tx_desc {
-	volatile unsigned short tmd0;        /* low address of packet */
-	volatile unsigned char  tmd1_bits;   /* descriptor bits */
-	volatile unsigned char  tmd1_hadr;   /* high address of packet */
-	volatile short    length;       	    /* Length is 2s complement (negative)! */
+	volatile unsigned short tmd0;	    /* low address of packet */
+	volatile unsigned char  tmd1_bits;  /* descriptor bits */
+	volatile unsigned char  tmd1_hadr;  /* high address of packet */
+	volatile short    length;	    /* Length is 2s complement (negative)! */
 	volatile unsigned short misc;
 };
 
@@ -71,184 +70,181 @@
  * init block,the Tx and Rx rings and the buffers together in memory:
  */
 struct lance_init_block {
-        volatile unsigned short mode;            /* Pre-set mode (reg. 15) */
-        volatile unsigned char phys_addr[6];     /* Physical ethernet address */
-        volatile unsigned filter[2];             /* Multicast filter (64 bits) */
-
-        /* Receive and transmit ring base, along with extra bits. */
-        volatile unsigned short rx_ptr;          /* receive descriptor addr */
-        volatile unsigned short rx_len;          /* receive len and high addr */
-        volatile unsigned short tx_ptr;          /* transmit descriptor addr */
-        volatile unsigned short tx_len;          /* transmit len and high addr */
-
-        /* The Tx and Rx ring entries must be aligned on 8-byte boundaries.
-         * This will be true if this whole struct is 8-byte aligned.
-         */
-        volatile struct lance_tx_desc btx_ring[TX_RING_SIZE];
-        volatile struct lance_rx_desc brx_ring[RX_RING_SIZE];
-
-        volatile char   tx_buf [TX_RING_SIZE][TX_BUFF_SIZE];
-        volatile char   rx_buf [RX_RING_SIZE][RX_BUFF_SIZE];
-        /* we use this just to make the struct big enough that we can move its startaddr
-         * in order to force alignment to an eight byte boundary.
-         */
+	volatile unsigned short mode;		/* Pre-set mode (reg. 15) */
+	volatile unsigned char phys_addr[6];	/* Physical ethernet address */
+	volatile unsigned filter[2];		/* Multicast filter (64 bits) */
+
+	/* Receive and transmit ring base, along with extra bits. */
+	volatile unsigned short rx_ptr;		/* receive descriptor addr */
+	volatile unsigned short rx_len;		/* receive len and high addr */
+	volatile unsigned short tx_ptr;		/* transmit descriptor addr */
+	volatile unsigned short tx_len;		/* transmit len and high addr */
+
+	/* The Tx and Rx ring entries must be aligned on 8-byte boundaries.
+	 * This will be true if this whole struct is 8-byte aligned.
+	 */
+	volatile struct lance_tx_desc btx_ring[TX_RING_SIZE];
+	volatile struct lance_rx_desc brx_ring[RX_RING_SIZE];
+
+	volatile char tx_buf[TX_RING_SIZE][TX_BUFF_SIZE];
+	volatile char rx_buf[RX_RING_SIZE][RX_BUFF_SIZE];
+	/* we use this just to make the struct big enough that we can move its startaddr
+	 * in order to force alignment to an eight byte boundary.
+	 */
 };
 
 /* This is where we keep all the stuff the driver needs to know about.
  * I'm definitely unhappy about the mechanism for allowing specific
  * drivers to add things...
  */
-struct lance_private
-{
-        char *name;
+struct lance_private {
+	const char *name;
 	unsigned long base;
-        volatile struct lance_init_block *init_block; /* CPU address of RAM */
-        volatile struct lance_init_block *lance_init_block; /* LANCE address of RAM */
+	volatile struct lance_init_block *init_block; /* CPU address of RAM */
+	volatile struct lance_init_block *lance_init_block; /* LANCE address of RAM */
 
-        int rx_new, tx_new;
-        int rx_old, tx_old;
+	int rx_new, tx_new;
+	int rx_old, tx_old;
 
-        int lance_log_rx_bufs, lance_log_tx_bufs;
-        int rx_ring_mod_mask, tx_ring_mod_mask;
+	int lance_log_rx_bufs, lance_log_tx_bufs;
+	int rx_ring_mod_mask, tx_ring_mod_mask;
 
-        int tpe;                                  /* TPE is selected */
-        int auto_select;                          /* cable-selection is by carrier */
-        unsigned short busmaster_regval;
-
-        unsigned int irq;                         /* IRQ to register */
-
-        /* This is because the HP LANCE is disgusting and you have to check
-         * a DIO-specific register every time you read/write the LANCE regs :-<
-         * [could we get away with making these some sort of macro?]
-         */
-        void (*writerap)(void *, unsigned short);
-        void (*writerdp)(void *, unsigned short);
-        unsigned short (*readrdp)(void *);
+	int tpe;			/* TPE is selected */
+	int auto_select;		/* cable-selection is by carrier */
+	unsigned short busmaster_regval;
+
+	unsigned int irq;		/* IRQ to register */
+
+	/* This is because the HP LANCE is disgusting and you have to check
+	 * a DIO-specific register every time you read/write the LANCE regs :-<
+	 * [could we get away with making these some sort of macro?]
+	 */
+	void (*writerap)(void *, unsigned short);
+	void (*writerdp)(void *, unsigned short);
+	unsigned short (*readrdp)(void *);
 	spinlock_t devlock;
 	char tx_full;
 };
 
 /*
- *              Am7990 Control and Status Registers
+ *		Am7990 Control and Status Registers
  */
-#define LE_CSR0         0x0000          /* LANCE Controller Status */
-#define LE_CSR1         0x0001          /* IADR[15:0] (bit0==0 ie word aligned) */
-#define LE_CSR2         0x0002          /* IADR[23:16] (high bits reserved) */
-#define LE_CSR3         0x0003          /* Misc */
+#define LE_CSR0		0x0000	/* LANCE Controller Status */
+#define LE_CSR1		0x0001	/* IADR[15:0] (bit0==0 ie word aligned) */
+#define LE_CSR2		0x0002	/* IADR[23:16] (high bits reserved) */
+#define LE_CSR3		0x0003	/* Misc */
 
 /*
  *		Bit definitions for CSR0 (LANCE Controller Status)
  */
-#define LE_C0_ERR	0x8000		/* Error = BABL | CERR | MISS | MERR */
-#define LE_C0_BABL	0x4000		/* Babble: Transmitted too many bits */
-#define LE_C0_CERR	0x2000		/* No Heartbeat (10BASE-T) */
-#define LE_C0_MISS	0x1000		/* Missed Frame (no rx buffer to put it in) */
-#define LE_C0_MERR	0x0800		/* Memory Error */
-#define LE_C0_RINT	0x0400		/* Receive Interrupt */
-#define LE_C0_TINT	0x0200		/* Transmit Interrupt */
-#define LE_C0_IDON	0x0100		/* Initialization Done */
-#define LE_C0_INTR	0x0080		/* Interrupt Flag
-                                         = BABL | MISS | MERR | RINT | TINT | IDON */
-#define LE_C0_INEA	0x0040		/* Interrupt Enable */
-#define LE_C0_RXON	0x0020		/* Receive On */
-#define LE_C0_TXON	0x0010		/* Transmit On */
-#define LE_C0_TDMD	0x0008		/* Transmit Demand */
-#define LE_C0_STOP	0x0004		/* Stop */
-#define LE_C0_STRT	0x0002		/* Start */
-#define LE_C0_INIT	0x0001		/* Initialize */
+#define LE_C0_ERR	0x8000	/* Error = BABL | CERR | MISS | MERR */
+#define LE_C0_BABL	0x4000	/* Babble: Transmitted too many bits */
+#define LE_C0_CERR	0x2000	/* No Heartbeat (10BASE-T) */
+#define LE_C0_MISS	0x1000	/* Missed Frame (no rx buffer to put it in) */
+#define LE_C0_MERR	0x0800	/* Memory Error */
+#define LE_C0_RINT	0x0400	/* Receive Interrupt */
+#define LE_C0_TINT	0x0200	/* Transmit Interrupt */
+#define LE_C0_IDON	0x0100	/* Initialization Done */
+#define LE_C0_INTR	0x0080	/* Interrupt Flag
+				   = BABL | MISS | MERR | RINT | TINT | IDON */
+#define LE_C0_INEA	0x0040	/* Interrupt Enable */
+#define LE_C0_RXON	0x0020	/* Receive On */
+#define LE_C0_TXON	0x0010	/* Transmit On */
+#define LE_C0_TDMD	0x0008	/* Transmit Demand */
+#define LE_C0_STOP	0x0004	/* Stop */
+#define LE_C0_STRT	0x0002	/* Start */
+#define LE_C0_INIT	0x0001	/* Initialize */
 
 
 /*
  *		Bit definitions for CSR3
  */
-#define LE_C3_BSWP	0x0004		/* Byte Swap
-					   (on for big endian byte order) */
-#define LE_C3_ACON	0x0002		/* ALE Control
-					   (on for active low ALE) */
-#define LE_C3_BCON	0x0001		/* Byte Control */
+#define LE_C3_BSWP	0x0004	/* Byte Swap (on for big endian byte order) */
+#define LE_C3_ACON	0x0002	/* ALE Control (on for active low ALE) */
+#define LE_C3_BCON	0x0001	/* Byte Control */
 
 
 /*
  *		Mode Flags
  */
-#define LE_MO_PROM	0x8000		/* Promiscuous Mode */
+#define LE_MO_PROM	0x8000	/* Promiscuous Mode */
 /* these next ones 0x4000 -- 0x0080 are not available on the LANCE 7990,
  * but they are in NetBSD's am7990.h, presumably for backwards-compatible chips
  */
-#define LE_MO_DRCVBC  0x4000          /* disable receive broadcast */
-#define LE_MO_DRCVPA  0x2000          /* disable physical address detection */
-#define LE_MO_DLNKTST 0x1000          /* disable link status */
-#define LE_MO_DAPC    0x0800          /* disable automatic polarity correction */
-#define LE_MO_MENDECL 0x0400          /* MENDEC loopback mode */
-#define LE_MO_LRTTSEL 0x0200          /* lower RX threshold / TX mode selection */
-#define LE_MO_PSEL1   0x0100          /* port selection bit1 */
-#define LE_MO_PSEL0   0x0080          /* port selection bit0 */
+#define LE_MO_DRCVBC	0x4000	/* disable receive broadcast */
+#define LE_MO_DRCVPA	0x2000	/* disable physical address detection */
+#define LE_MO_DLNKTST	0x1000	/* disable link status */
+#define LE_MO_DAPC	0x0800	/* disable automatic polarity correction */
+#define LE_MO_MENDECL	0x0400	/* MENDEC loopback mode */
+#define LE_MO_LRTTSEL	0x0200	/* lower RX threshold / TX mode selection */
+#define LE_MO_PSEL1	0x0100	/* port selection bit1 */
+#define LE_MO_PSEL0	0x0080	/* port selection bit0 */
 /* and this one is from the C-LANCE data sheet... */
-#define LE_MO_EMBA      0x0080          /* Enable Modified Backoff Algorithm
-                                           (C-LANCE, not original LANCE) */
-#define LE_MO_INTL	0x0040		/* Internal Loopback */
-#define LE_MO_DRTY	0x0020		/* Disable Retry */
-#define LE_MO_FCOLL	0x0010		/* Force Collision */
-#define LE_MO_DXMTFCS	0x0008		/* Disable Transmit CRC */
-#define LE_MO_LOOP	0x0004		/* Loopback Enable */
-#define LE_MO_DTX	0x0002		/* Disable Transmitter */
-#define LE_MO_DRX	0x0001		/* Disable Receiver */
+#define LE_MO_EMBA	0x0080	/* Enable Modified Backoff Algorithm
+				   (C-LANCE, not original LANCE) */
+#define LE_MO_INTL	0x0040	/* Internal Loopback */
+#define LE_MO_DRTY	0x0020	/* Disable Retry */
+#define LE_MO_FCOLL	0x0010	/* Force Collision */
+#define LE_MO_DXMTFCS	0x0008	/* Disable Transmit CRC */
+#define LE_MO_LOOP	0x0004	/* Loopback Enable */
+#define LE_MO_DTX	0x0002	/* Disable Transmitter */
+#define LE_MO_DRX	0x0001	/* Disable Receiver */
 
 
 /*
  *		Receive Flags
  */
-#define LE_R1_OWN	0x80		/* LANCE owns the descriptor */
-#define LE_R1_ERR	0x40		/* Error */
-#define LE_R1_FRA	0x20		/* Framing Error */
-#define LE_R1_OFL	0x10		/* Overflow Error */
-#define LE_R1_CRC	0x08		/* CRC Error */
-#define LE_R1_BUF	0x04		/* Buffer Error */
-#define LE_R1_SOP	0x02		/* Start of Packet */
-#define LE_R1_EOP	0x01		/* End of Packet */
-#define LE_R1_POK       0x03		/* Packet is complete: SOP + EOP */
+#define LE_R1_OWN	0x80	/* LANCE owns the descriptor */
+#define LE_R1_ERR	0x40	/* Error */
+#define LE_R1_FRA	0x20	/* Framing Error */
+#define LE_R1_OFL	0x10	/* Overflow Error */
+#define LE_R1_CRC	0x08	/* CRC Error */
+#define LE_R1_BUF	0x04	/* Buffer Error */
+#define LE_R1_SOP	0x02	/* Start of Packet */
+#define LE_R1_EOP	0x01	/* End of Packet */
+#define LE_R1_POK	0x03	/* Packet is complete: SOP + EOP */
 
 
 /*
  *		Transmit Flags
  */
-#define LE_T1_OWN	0x80		/* LANCE owns the descriptor */
-#define LE_T1_ERR	0x40		/* Error */
-#define LE_T1_RES	0x20		/* Reserved, LANCE writes this with a zero */
-#define LE_T1_EMORE	0x10		/* More than one retry needed */
-#define LE_T1_EONE	0x08		/* One retry needed */
-#define LE_T1_EDEF	0x04		/* Deferred */
-#define LE_T1_SOP	0x02		/* Start of Packet */
-#define LE_T1_EOP	0x01		/* End of Packet */
-#define LE_T1_POK	0x03		/* Packet is complete: SOP + EOP */
+#define LE_T1_OWN	0x80	/* LANCE owns the descriptor */
+#define LE_T1_ERR	0x40	/* Error */
+#define LE_T1_RES	0x20	/* Reserved, LANCE writes this with a zero */
+#define LE_T1_EMORE	0x10	/* More than one retry needed */
+#define LE_T1_EONE	0x08	/* One retry needed */
+#define LE_T1_EDEF	0x04	/* Deferred */
+#define LE_T1_SOP	0x02	/* Start of Packet */
+#define LE_T1_EOP	0x01	/* End of Packet */
+#define LE_T1_POK	0x03	/* Packet is complete: SOP + EOP */
 
 /*
  *		Error Flags
  */
-#define LE_T3_BUF 	0x8000		/* Buffer Error */
-#define LE_T3_UFL 	0x4000		/* Underflow Error */
-#define LE_T3_LCOL 	0x1000		/* Late Collision */
-#define LE_T3_CLOS 	0x0800		/* Loss of Carrier */
-#define LE_T3_RTY 	0x0400		/* Retry Error */
-#define LE_T3_TDR	0x03ff		/* Time Domain Reflectometry */
+#define LE_T3_BUF	0x8000	/* Buffer Error */
+#define LE_T3_UFL	0x4000	/* Underflow Error */
+#define LE_T3_LCOL	0x1000	/* Late Collision */
+#define LE_T3_CLOS	0x0800	/* Loss of Carrier */
+#define LE_T3_RTY	0x0400	/* Retry Error */
+#define LE_T3_TDR	0x03ff	/* Time Domain Reflectometry */
 
 /* Miscellaneous useful macros */
 
-#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
-                        lp->tx_old+lp->tx_ring_mod_mask-lp->tx_new:\
-                        lp->tx_old - lp->tx_new-1)
+#define TX_BUFFS_AVAIL ((lp->tx_old <= lp->tx_new) ? \
+			lp->tx_old + lp->tx_ring_mod_mask - lp->tx_new : \
+			lp->tx_old - lp->tx_new - 1)
 
 /* The LANCE only uses 24 bit addresses. This does the obvious thing. */
 #define LANCE_ADDR(x) ((int)(x) & ~0xff000000)
 
 /* Now the prototypes we export */
-extern int lance_open(struct net_device *dev);
-extern int lance_close (struct net_device *dev);
-extern int lance_start_xmit (struct sk_buff *skb, struct net_device *dev);
-extern void lance_set_multicast (struct net_device *dev);
-extern void lance_tx_timeout(struct net_device *dev);
+int lance_open(struct net_device *dev);
+int lance_close(struct net_device *dev);
+int lance_start_xmit(struct sk_buff *skb, struct net_device *dev);
+void lance_set_multicast(struct net_device *dev);
+void lance_tx_timeout(struct net_device *dev);
 #ifdef CONFIG_NET_POLL_CONTROLLER
-extern void lance_poll(struct net_device *dev);
+void lance_poll(struct net_device *dev);
 #endif
 
 #endif /* ndef _7990_H */