--- zzzz-none-000/linux-3.10.107/drivers/net/ethernet/intel/e1000e/ich8lan.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/ethernet/intel/e1000e/ich8lan.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS + * e1000-devel Mailing List + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 82562G 10/100 Network Connection * 82562G-2 10/100 Network Connection @@ -53,6 +46,14 @@ * 82578DC Gigabit Network Connection * 82579LM Gigabit Network Connection * 82579V Gigabit Network Connection + * Ethernet Connection I217-LM + * Ethernet Connection I217-V + * Ethernet Connection I218-V + * Ethernet Connection I218-LM + * Ethernet Connection (2) I218-LM + * Ethernet Connection (2) I218-V + * Ethernet Connection (3) I218-LM + * Ethernet Connection (3) I218-V */ #include "e1000.h" @@ -101,12 +102,12 @@ /* ICH Flash Protected Region */ union ich8_flash_protected_range { struct ich8_pr { - u32 base:13; /* 0:12 Protected Range Base */ - u32 reserved1:2; /* 13:14 Reserved */ - u32 rpe:1; /* 15 Read Protection Enable */ - u32 limit:13; /* 16:28 Protected Range Limit */ - u32 reserved2:2; /* 29:30 Reserved */ - u32 wpe:1; /* 31 Write Protection Enable */ + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ } range; u32 regval; }; @@ -122,6 +123,14 @@ u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); +static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data); +static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 *data); +static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, + u32 offset, u32 data); +static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); @@ -138,11 +147,14 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force); static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -183,8 +195,9 @@ { u16 phy_reg = 0; u32 phy_id = 0; - s32 ret_val; + s32 ret_val = 0; u16 retry_count; + u32 mac_reg = 0; for (retry_count = 0; retry_count < 2; retry_count++) { ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); @@ -203,23 +216,84 @@ if (hw->phy.id) { if (hw->phy.id == phy_id) - return true; + goto out; } else if (phy_id) { hw->phy.id = phy_id; hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); - return true; + goto out; } /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ - hw->phy.ops.release(hw); - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (!ret_val) - ret_val = e1000e_get_phy_id(hw); - hw->phy.ops.acquire(hw); + if (hw->mac.type < e1000_pch_lpt) { + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + } + + if (ret_val) + return false; +out: + if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { + /* Only unforce SMBus if ME is not active */ + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + } + + return true; +} + +/** + * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value + * @hw: pointer to the HW structure + * + * Toggling the LANPHYPC pin value fully power-cycles the PHY and is + * used to reset the PHY to a quiescent state when necessary. + **/ +static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) +{ + u32 mac_reg; + + /* Set Phy Config Counter to 50msec */ + mac_reg = er32(FEXTNVM3); + mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; + mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; + ew32(FEXTNVM3, mac_reg); + + /* Toggle LANPHYPC Value bit */ + mac_reg = er32(CTRL); + mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; + mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, mac_reg); + e1e_flush(); + usleep_range(10, 20); + mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, mac_reg); + e1e_flush(); + + if (hw->mac.type < e1000_pch_lpt) { + msleep(50); + } else { + u16 count = 20; + + do { + usleep_range(5000, 10000); + } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--); - return !ret_val; + msleep(30); + } } /** @@ -231,15 +305,21 @@ **/ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; - u16 phy_reg; /* Gate automatic PHY configuration by hardware on managed and * non-managed 82579 and newer adapters. */ e1000_gate_hw_phy_config_ich8lan(hw, true); + /* It is not possible to be certain of the current state of ULP + * so forcibly disable it. + */ + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown; + e1000_disable_ulp_lpt_lp(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); @@ -252,6 +332,7 @@ */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -262,22 +343,16 @@ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); + /* Wait 50 milliseconds for MAC to finish any retries + * that it might be trying to perform from previous + * attempts to acknowledge any phy read requests. + */ + msleep(50); + /* fall-through */ case e1000_pch2lan: - if (e1000_phy_is_accessible_pchlan(hw)) { - if (hw->mac.type == e1000_pch_lpt) { - /* Unforce SMBus mode in PHY */ - e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); - phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Unforce SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - } + if (e1000_phy_is_accessible_pchlan(hw)) break; - } /* fall-through */ case e1000_pchlan: @@ -287,44 +362,27 @@ if (hw->phy.ops.check_reset_block(hw)) { e_dbg("Required LANPHYPC toggle blocked by ME\n"); + ret_val = -E1000_ERR_PHY; break; } - e_dbg("Toggling LANPHYPC\n"); - - /* Set Phy Config Counter to 50msec */ - mac_reg = er32(FEXTNVM3); - mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; - mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; - ew32(FEXTNVM3, mac_reg); + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + if (hw->mac.type >= e1000_pch_lpt) { + if (e1000_phy_is_accessible_pchlan(hw)) + break; - if (hw->mac.type == e1000_pch_lpt) { /* Toggling LANPHYPC brings the PHY out of SMBus mode - * So ensure that the MAC is also out of SMBus mode + * so ensure that the MAC is also out of SMBus mode */ mac_reg = er32(CTRL_EXT); mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); - } - /* Toggle LANPHYPC Value bit */ - mac_reg = er32(CTRL); - mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; - mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, mac_reg); - e1e_flush(); - usleep_range(10, 20); - mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, mac_reg); - e1e_flush(); - if (hw->mac.type < e1000_pch_lpt) { - msleep(50); - } else { - u16 count = 20; - do { - usleep_range(5000, 10000); - } while (!(er32(CTRL_EXT) & - E1000_CTRL_EXT_LPCD) && count--); + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + ret_val = -E1000_ERR_PHY; } break; default: @@ -332,13 +390,33 @@ } hw->phy.ops.release(hw); + if (!ret_val) { - /* Reset the PHY before any access to it. Doing so, ensures - * that the PHY is in a known good state before we read/write - * PHY registers. The generic reset is sufficient here, - * because we haven't determined the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); + /* Check to see if able to reset PHY. Print error if not */ + if (hw->phy.ops.check_reset_block(hw)) { + e_err("Reset blocked by ME\n"); + goto out; + } + + /* Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; + + /* On a successful reset, possibly need to wait for the PHY + * to quiesce to an accessible state before returning control + * to the calling function. If the PHY does not quiesce, then + * return E1000E_BLK_PHY_RESET, as this is the condition that + * the PHY is in. + */ + ret_val = hw->phy.ops.check_reset_block(hw); + if (ret_val) + e_err("ME blocked access to PHY after reset\n"); + } out: /* Ungate automatic PHY configuration on non-managed 82579 */ @@ -362,21 +440,21 @@ struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - phy->addr = 1; - phy->reset_delay_us = 100; + phy->addr = 1; + phy->reset_delay_us = 100; - phy->ops.set_page = e1000_set_page_igp; - phy->ops.read_reg = e1000_read_phy_reg_hv; - phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; - phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; - phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_reg = e1000_write_phy_reg_hv; - phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; - phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->ops.set_page = e1000_set_page_igp; + phy->ops.read_reg = e1000_read_phy_reg_hv; + phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.write_reg = e1000_write_phy_reg_hv; + phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -395,6 +473,7 @@ /* fall-through */ case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ @@ -445,11 +524,11 @@ s32 ret_val; u16 i = 0; - phy->addr = 1; - phy->reset_delay_us = 100; + phy->addr = 1; + phy->reset_delay_us = 100; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; /* We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again @@ -457,7 +536,7 @@ ret_val = e1000e_determine_phy_address(hw); if (ret_val) { phy->ops.write_reg = e1000e_write_phy_reg_bm; - phy->ops.read_reg = e1000e_read_phy_reg_bm; + phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); if (ret_val) { e_dbg("Cannot determine PHY addr. Erroring out\n"); @@ -506,7 +585,6 @@ break; default: return -E1000_ERR_PHY; - break; } return 0; @@ -525,42 +603,61 @@ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 gfpreg, sector_base_addr, sector_end_addr; u16 i; - - /* Can't read flash registers if the register set isn't mapped. */ - if (!hw->flash_address) { - e_dbg("ERROR: Flash registers not mapped\n"); - return -E1000_ERR_CONFIG; - } + u32 nvm_size; nvm->type = e1000_nvm_flash_sw; - gfpreg = er32flash(ICH_FLASH_GFPREG); + if (hw->mac.type == e1000_pch_spt) { + /* in SPT, gfpreg doesn't exist. NVM size is taken from the + * STRAP register. This is because in SPT the GbE Flash region + * is no longer accessed through the flash registers. Instead, + * the mechanism has changed, and the Flash region access + * registers are now implemented in GbE memory space. + */ + nvm->flash_base_addr = 0; + nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1) + * NVM_SIZE_MULTIPLIER; + nvm->flash_bank_size = nvm_size / 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); + /* Set the base address for flash register access */ + hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR; + } else { + /* Can't read flash registers if register set isn't mapped. */ + if (!hw->flash_address) { + e_dbg("ERROR: Flash registers not mapped\n"); + return -E1000_ERR_CONFIG; + } + + gfpreg = er32flash(ICH_FLASH_GFPREG); + + /* sector_X_addr is a "sector"-aligned address (4096 bytes) + * Add 1 to sector_end_addr since this sector is included in + * the overall size. + */ + sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; + sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; + + /* flash_base_addr is byte-aligned */ + nvm->flash_base_addr = sector_base_addr + << FLASH_SECTOR_ADDR_SHIFT; - /* sector_X_addr is a "sector"-aligned address (4096 bytes) - * Add 1 to sector_end_addr since this sector is included in - * the overall size. - */ - sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; - sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; - - /* flash_base_addr is byte-aligned */ - nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - - /* find total size of the NVM, then cut in half since the total - * size represents two separate NVM banks. - */ - nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) - << FLASH_SECTOR_ADDR_SHIFT); - nvm->flash_bank_size /= 2; - /* Adjust to word count */ - nvm->flash_bank_size /= sizeof(u16); + /* find total size of the NVM, then cut in half since the total + * size represents two separate NVM banks. + */ + nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) + << FLASH_SECTOR_ADDR_SHIFT); + nvm->flash_bank_size /= 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); + } nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS; /* Clear shadow ram */ for (i = 0; i < nvm->word_size; i++) { dev_spec->shadow_ram[i].modified = false; - dev_spec->shadow_ram[i].value = 0xFFFF; + dev_spec->shadow_ram[i].value = 0xFFFF; } return 0; @@ -617,6 +714,7 @@ mac->ops.rar_set = e1000_rar_set_pch2lan; /* fall-through */ case e1000_pch_lpt: + case e1000_pch_spt: case e1000_pchlan: /* check management mode */ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; @@ -634,11 +732,12 @@ break; } - if (mac->type == e1000_pch_lpt) { + if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt)) { mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; + mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ @@ -707,8 +806,14 @@ * Enable/disable EEE based on setting in dev_spec structure, the duplex of * the link and the EEE capabilities of the link partner. The LPI Control * register bits will remain set only if/when link is up. + * + * EEE LPI must not be asserted earlier than one second after link is up. + * On 82579, EEE LPI should not be enabled until such time otherwise there + * can be link issues with some switches. Other devices can have EEE LPI + * enabled immediately upon link up since they have a timer in hardware which + * prevents LPI from being asserted too early. **/ -static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) +s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; s32 ret_val; @@ -773,6 +878,17 @@ } } + if (hw->phy.type == e1000_phy_82579) { + ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + &data); + if (ret_val) + goto release; + + data &= ~I82579_LPI_100_PLL_SHUT; + ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + data); + } + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); if (ret_val) @@ -793,29 +909,31 @@ * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications * preventing further DMA write requests. Workaround the issue by disabling * the de-assertion of the clock request when in 1Gpbs mode. + * Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link + * speeds in order to avoid Tx hangs. **/ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) { u32 fextnvm6 = er32(FEXTNVM6); + u32 status = er32(STATUS); s32 ret_val = 0; + u16 reg; - if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { - u16 kmrn_reg; - + if (link && (status & E1000_STATUS_SPEED_1000)) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - &kmrn_reg); + ®); if (ret_val) goto release; ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg & + reg & ~E1000_KMRNCTRLSTA_K1_ENABLE); if (ret_val) goto release; @@ -827,12 +945,46 @@ ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg); + reg); release: hw->phy.ops.release(hw); } else { /* clear FEXTNVM6 bit 8 on link down or 10/100 */ - ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; + + if ((hw->phy.revision > 5) || !link || + ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) + goto update_fextnvm6; + + ret_val = e1e_rphy(hw, I217_INBAND_CTRL, ®); + if (ret_val) + return ret_val; + + /* Clear link status transmit timeout */ + reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK; + + if (status & E1000_STATUS_SPEED_100) { + /* Set inband Tx timeout to 5x10us for 100Half */ + reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Do not extend the K1 entry latency for 100Half */ + fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } else { + /* Set inband Tx timeout to 50x10us for 10Full/Half */ + reg |= 50 << + I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Extend the K1 entry latency for 10 Mbps */ + fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } + + ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg); + if (ret_val) + return ret_val; + +update_fextnvm6: + ew32(FEXTNVM6, fextnvm6); } return ret_val; @@ -864,8 +1016,7 @@ u16 speed, duplex, scale = 0; u16 max_snoop, max_nosnoop; u16 max_ltr_enc; /* max LTR latency encoded */ - s64 lat_ns; /* latency (ns) */ - s64 value; + u64 value; u32 rxa; if (!hw->adapter->max_frame_size) { @@ -890,14 +1041,11 @@ * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns, * 1=2^5ns, 2=2^10ns,...5=2^25ns. */ - lat_ns = ((s64)rxa * 1024 - - (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000; - if (lat_ns < 0) - lat_ns = 0; - else - do_div(lat_ns, speed); + rxa *= 512; + value = (rxa > hw->adapter->max_frame_size) ? + (rxa - hw->adapter->max_frame_size) * (16000 / speed) : + 0; - value = lat_ns; while (value > PCI_LTR_VALUE_MASK) { scale++; value = DIV_ROUND_UP(value, (1 << 5)); @@ -927,6 +1075,287 @@ } /** + * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @to_sx: boolean indicating a system power state transition to Sx + * + * When link is down, configure ULP mode to significantly reduce the power + * to the PHY. If on a Manageability Engine (ME) enabled system, tell the + * ME firmware to start the ULP configuration. If not on an ME enabled + * system, configure the ULP mode by software. + */ +s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) +{ + u32 mac_reg; + s32 ret_val = 0; + u16 phy_reg; + u16 oem_reg = 0; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + /* Request ME configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + + goto out; + } + + if (!to_sx) { + int i = 0; + + /* Poll up to 5 seconds for Cable Disconnected indication */ + while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) { + /* Bail if link is re-acquired */ + if (er32(STATUS) & E1000_STATUS_LU) + return -E1000_ERR_PHY; + + if (i++ == 100) + break; + + msleep(50); + } + e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n", + (er32(FEXT) & + E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50); + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable + * LPLU and disable Gig speed when entering ULP + */ + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) { + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS, + &oem_reg); + if (ret_val) + goto release; + + phy_reg = oem_reg; + phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS; + + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + phy_reg); + + if (ret_val) + goto release; + } + + /* Set Inband ULP Exit, Reset to SMBus mode and + * Disable SMBus Release on PERST# in PHY + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + if (to_sx) { + if (er32(WUFC) & E1000_WUFC_LNKC) + phy_reg |= I218_ULP_CONFIG1_WOL_HOST; + else + phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST; + + phy_reg |= I218_ULP_CONFIG1_STICKY_ULP; + phy_reg &= ~I218_ULP_CONFIG1_INBAND_EXIT; + } else { + phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT; + phy_reg &= ~I218_ULP_CONFIG1_STICKY_ULP; + phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST; + } + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Set Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + + /* Commit ULP changes in PHY by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) && + to_sx && (er32(STATUS) & E1000_STATUS_LU)) { + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + oem_reg); + if (ret_val) + goto release; + } + +release: + hw->phy.ops.release(hw); +out: + if (ret_val) + e_dbg("Error in ULP enable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on; + + return ret_val; +} + +/** + * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @force: boolean indicating whether or not to force disabling ULP + * + * Un-configure ULP mode when link is up, the system is transitioned from + * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled + * system, poll for an indication from ME that ULP has been un-configured. + * If not on an ME enabled system, un-configure the ULP mode by software. + * + * During nominal operation, this function is called when link is acquired + * to disable ULP mode (force=false); otherwise, for example when unloading + * the driver or during Sx->S0 transitions, this is called with force=true + * to forcibly disable ULP. + */ +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 phy_reg; + int i = 0; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + if (force) { + /* Request ME un-configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + mac_reg |= E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } + + /* Poll up to 100msec for ME to clear ULP_CFG_DONE */ + while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) { + if (i++ == 10) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + usleep_range(10000, 20000); + } + e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10); + + if (force) { + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } else { + /* Clear H2ME.ULP after ME ULP configuration */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + ew32(H2ME, mac_reg); + } + + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + if (force) + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + + /* Unforce SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) { + /* The MAC might be in PCIe mode, so temporarily force to + * SMBus mode in order to access the PHY. + */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + msleep(50); + + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, + &phy_reg); + if (ret_val) + goto release; + } + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* When ULP mode was previously entered, K1 was disabled by the + * hardware. Re-Enable K1 in the PHY when exiting ULP. + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= HV_PM_CTRL_K1_ENABLE; + e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg); + + /* Clear ULP enabled configuration */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg &= ~(I218_ULP_CONFIG1_IND | + I218_ULP_CONFIG1_STICKY_ULP | + I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_WOL_HOST | + I218_ULP_CONFIG1_INBAND_EXIT | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Commit ULP changes by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Clear Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + +release: + hw->phy.ops.release(hw); + if (force) { + e1000_phy_hw_reset(hw); + msleep(50); + } +out: + if (ret_val) + e_dbg("Error in ULP disable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off; + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -937,7 +1366,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; + s32 ret_val, tipg_reg = 0; + u16 emi_addr, emi_val = 0; bool link; u16 phy_reg; @@ -963,43 +1393,109 @@ return ret_val; } - /* When connected at 10Mbps half-duplex, 82579 parts are excessively + /* When connected at 10Mbps half-duplex, some parts are excessively * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if ((hw->mac.type == e1000_pch2lan) && link) { - u32 reg; - reg = er32(STATUS); - if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { - reg = er32(TIPG); - reg &= ~E1000_TIPG_IPGT_MASK; - reg |= 0xFF; - ew32(TIPG, reg); + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) && link) { + u16 speed, duplex; + + e1000e_get_speed_and_duplex_copper(hw, &speed, &duplex); + tipg_reg = er32(TIPG); + tipg_reg &= ~E1000_TIPG_IPGT_MASK; + if (duplex == HALF_DUPLEX && speed == SPEED_10) { + tipg_reg |= 0xFF; /* Reduce Rx latency in analog PHY */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; + emi_val = 0; + } else if (hw->mac.type == e1000_pch_spt && + duplex == FULL_DUPLEX && speed != SPEED_1000) { + tipg_reg |= 0xC; + emi_val = 1; + } else { - ret_val = - e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); + /* Roll back the default values */ + tipg_reg |= 0x08; + emi_val = 1; + } - hw->phy.ops.release(hw); + ew32(TIPG, tipg_reg); - if (ret_val) - return ret_val; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val); + + hw->phy.ops.release(hw); + + if (ret_val) + return ret_val; + + if (hw->mac.type == e1000_pch_spt) { + u16 data; + u16 ptr_gap; + + if (speed == SPEED_1000) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1e_rphy_locked(hw, + PHY_REG(776, 20), + &data); + if (ret_val) { + hw->phy.ops.release(hw); + return ret_val; + } + + ptr_gap = (data & (0x3FF << 2)) >> 2; + if (ptr_gap < 0x18) { + data &= ~(0x3FF << 2); + data |= (0x18 << 2); + ret_val = + e1e_wphy_locked(hw, + PHY_REG(776, 20), + data); + } + hw->phy.ops.release(hw); + if (ret_val) + return ret_val; + } } } + /* I217 Packet Loss issue: + * ensure that FEXTNVM4 Beacon Duration is set correctly + * on power up. + * Set the Beacon Duration for I217 to 8 usec + */ + if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; + ew32(FEXTNVM4, mac_reg); + } + /* Work-around I218 hang issue */ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { ret_val = e1000_k1_workaround_lpt_lp(hw, link); if (ret_val) return ret_val; } - - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { /* Set platform power management values for * Latency Tolerance Reporting (LTR) */ @@ -1011,8 +1507,21 @@ /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; + /* FEXTNVM6 K1-off workaround */ + if (hw->mac.type == e1000_pch_spt) { + u32 pcieanacfg = er32(PCIEANACFG); + u32 fextnvm6 = er32(FEXTNVM6); + + if (pcieanacfg & E1000_FEXTNVM6_K1_OFF_ENABLE) + fextnvm6 |= E1000_FEXTNVM6_K1_OFF_ENABLE; + else + fextnvm6 &= ~E1000_FEXTNVM6_K1_OFF_ENABLE; + + ew32(FEXTNVM6, fextnvm6); + } + if (!link) - return 0; /* No link detected */ + return 0; /* No link detected */ mac->get_link_status = false; @@ -1052,9 +1561,11 @@ e1000e_check_downshift(hw); /* Enable/Disable EEE after link up */ - ret_val = e1000_set_eee_pchlan(hw); - if (ret_val) - return ret_val; + if (hw->phy.type > e1000_phy_82579) { + ret_val = e1000_set_eee_pchlan(hw); + if (ret_val) + return ret_val; + } /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. @@ -1102,6 +1613,7 @@ case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: rc = e1000_init_phy_params_pchlan(hw); break; default: @@ -1117,7 +1629,7 @@ ((adapter->hw.mac.type >= e1000_pch2lan) && (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) { adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; - adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN; + adapter->max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; hw->mac.ops.blink_led = NULL; } @@ -1259,9 +1771,9 @@ u32 fwsm; fwsm = er32(FWSM); - return ((fwsm & E1000_ICH_FWSM_FW_VALID) && + return (fwsm & E1000_ICH_FWSM_FW_VALID) && ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))); + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** @@ -1292,7 +1804,7 @@ * contain the MAC address but RAR[1-6] are reserved for manageability (ME). * Use SHRA[0-3] in place of those reserved for ME. **/ -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -1314,10 +1826,13 @@ e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } - if (index < hw->mac.rar_entry_count) { + /* RAR[1-6] are owned by manageability. Skip those and program the + * next address into the SHRA register array. + */ + if (index < (u32)(hw->mac.rar_entry_count)) { s32 ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); @@ -1334,7 +1849,7 @@ /* verify the register updates */ if ((er32(SHRAL(index - 1)) == rar_low) && (er32(SHRAH(index - 1)) == rar_high)) - return; + return 0; e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", (index - 1), er32(FWSM)); @@ -1342,6 +1857,43 @@ out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; +} + +/** + * e1000_rar_get_count_pch_lpt - Get the number of available SHRA + * @hw: pointer to the HW structure + * + * Get the number of available receive registers that the Host can + * program. SHRA[0-10] are the shared receive address registers + * that are shared between the Host and manageability engine (ME). + * ME can reserve any number of addresses and the host needs to be + * able to tell how many available registers it has access to. + **/ +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw) +{ + u32 wlock_mac; + u32 num_entries; + + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + switch (wlock_mac) { + case 0: + /* All SHRA[0..10] and RAR[0] available */ + num_entries = hw->mac.rar_entry_count; + break; + case 1: + /* Only RAR[0] available */ + num_entries = 1; + break; + default: + /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */ + num_entries = wlock_mac + 1; + break; + } + + return num_entries; } /** @@ -1355,7 +1907,7 @@ * contain the MAC address. SHRA[0-10] are the shared receive address * registers that are shared between the Host and manageability engine (ME). **/ -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; u32 wlock_mac; @@ -1377,7 +1929,7 @@ e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* The manageability engine (ME) can lock certain SHRAR registers that @@ -1409,12 +1961,13 @@ /* verify the register updates */ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) - return; + return 0; } } out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; } /** @@ -1427,11 +1980,13 @@ **/ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) { - u32 fwsm; - - fwsm = er32(FWSM); + bool blocked = false; + int i = 0; - return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; + while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && + (i++ < 10)) + usleep_range(10000, 20000); + return blocked ? E1000_BLK_PHY_RESET : 0; } /** @@ -1509,6 +2064,7 @@ case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; break; default: @@ -1908,8 +2464,8 @@ if (ret_val) goto release; - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ + for (i = 0; i < (hw->mac.rar_entry_count); i++) { mac_reg = er32(RAL(i)); hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); @@ -1953,10 +2509,10 @@ return ret_val; if (enable) { - /* Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, and * SHRAL/H) and initial CRC values to the MAC */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + for (i = 0; i < hw->mac.rar_entry_count; i++) { u8 mac_addr[ETH_ALEN] = { 0 }; u32 addr_high, addr_low; @@ -2024,7 +2580,7 @@ return ret_val; e1e_rphy(hw, PHY_REG(776, 20), &data); data &= ~(0x3FF << 2); - data |= (0x1A << 2); + data |= (E1000_TX_PTR_GAP << 2); ret_val = e1e_wphy(hw, PHY_REG(776, 20), data); if (ret_val) return ret_val; @@ -2133,51 +2689,44 @@ * e1000_k1_gig_workaround_lv - K1 Si workaround * @hw: pointer to the HW structure * - * Workaround to set the K1 beacon duration for 82579 parts + * Workaround to set the K1 beacon duration for 82579 parts in 10Mbps + * Disable K1 in 1000Mbps and 100Mbps **/ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) { s32 ret_val = 0; u16 status_reg = 0; - u32 mac_reg; - u16 phy_reg; if (hw->mac.type != e1000_pch2lan) return 0; - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + /* Set K1 beacon duration based on 10Mbs speed */ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); if (ret_val) return ret_val; if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - return ret_val; - - if (status_reg & HV_M_STATUS_SPEED_1000) { + if (status_reg & + (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) { u16 pm_phy_reg; - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; - /* LV 1G Packet drop issue wa */ + /* LV 1G/100 Packet drop issue wa */ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg); if (ret_val) return ret_val; - pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; + pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE; ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg); if (ret_val) return ret_val; } else { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + ew32(FEXTNVM4, mac_reg); } - ew32(FEXTNVM4, mac_reg); - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } return ret_val; @@ -2548,6 +3097,20 @@ s32 ret_val; switch (hw->mac.type) { + /* In SPT, read from the CTRL_EXT reg instead of + * accessing the sector valid bits from the nvm + */ + case e1000_pch_spt: + *bank = er32(CTRL_EXT) + & E1000_CTRL_EXT_NVMVS; + if ((*bank == 0) || (*bank == 1)) { + e_dbg("ERROR: No valid NVM bank present\n"); + return -E1000_ERR_NVM; + } else { + *bank = *bank - 2; + return 0; + } + break; case e1000_ich8lan: case e1000_ich9lan: eecd = er32(EECD); @@ -2595,6 +3158,99 @@ } /** + * e1000_read_nvm_spt - NVM access for SPT + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the word(s) to read. + * @words: Size of data to read in words. + * @data: pointer to the word(s) to read at offset. + * + * Reads a word(s) from the NVM + **/ +static s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 act_offset; + s32 ret_val = 0; + u32 bank = 0; + u32 dword = 0; + u16 offset_to_read; + u16 i; + + if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || + (words == 0)) { + e_dbg("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + nvm->ops.acquire(hw); + + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) { + e_dbg("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + act_offset = (bank) ? nvm->flash_bank_size : 0; + act_offset += offset; + + ret_val = 0; + + for (i = 0; i < words; i += 2) { + if (words - i == 1) { + if (dev_spec->shadow_ram[offset + i].modified) { + data[i] = + dev_spec->shadow_ram[offset + i].value; + } else { + offset_to_read = act_offset + i - + ((act_offset + i) % 2); + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + if ((act_offset + i) % 2 == 0) + data[i] = (u16)(dword & 0xFFFF); + else + data[i] = (u16)((dword >> 16) & 0xFFFF); + } + } else { + offset_to_read = act_offset + i; + if (!(dev_spec->shadow_ram[offset + i].modified) || + !(dev_spec->shadow_ram[offset + i + 1].modified)) { + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + } + if (dev_spec->shadow_ram[offset + i].modified) + data[i] = + dev_spec->shadow_ram[offset + i].value; + else + data[i] = (u16)(dword & 0xFFFF); + if (dev_spec->shadow_ram[offset + i].modified) + data[i + 1] = + dev_spec->shadow_ram[offset + i + 1].value; + else + data[i + 1] = (u16)(dword >> 16 & 0xFFFF); + } + } + + nvm->ops.release(hw); + +out: + if (ret_val) + e_dbg("NVM read error: %d\n", ret_val); + + return ret_val; +} + +/** * e1000_read_nvm_ich8lan - Read word(s) from the NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the word(s) to read. @@ -2677,8 +3333,10 @@ /* Clear FCERR and DAEL in hw status by writing 1 */ hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or @@ -2694,7 +3352,10 @@ * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { s32 i; @@ -2715,7 +3376,11 @@ * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, + hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { e_dbg("Flash controller busy, cannot get access\n"); } @@ -2738,9 +3403,16 @@ u32 i = 0; /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { @@ -2757,6 +3429,23 @@ } /** + * e1000_read_flash_dword_ich8lan - Read dword from flash + * @hw: pointer to the HW structure + * @offset: offset to data location + * @data: pointer to the location for storing the data + * + * Reads the flash dword at offset into data. Offset is converted + * to bytes before read. + **/ +static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + /* Must convert word offset into bytes. */ + offset <<= 1; + return e1000_read_flash_data32_ich8lan(hw, offset, data); +} + +/** * e1000_read_flash_word_ich8lan - Read word from flash * @hw: pointer to the HW structure * @offset: offset to data location @@ -2788,7 +3477,14 @@ s32 ret_val; u16 word = 0; - ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + /* In SPT, only 32 bits access is supported, + * so this function should not be called. + */ + if (hw->mac.type == e1000_pch_spt) + return -E1000_ERR_NVM; + else + ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + if (ret_val) return ret_val; @@ -2816,7 +3512,7 @@ s32 ret_val = -E1000_ERR_NVM; u8 count = 0; - if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) return -E1000_ERR_NVM; flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + @@ -2874,6 +3570,82 @@ } /** + * e1000_read_flash_data32_ich8lan - Read dword from NVM + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the dword to read. + * @data: Pointer to the dword to store the value read. + * + * Reads a byte or word from the NVM using the flash access registers. + **/ + +static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val = -E1000_ERR_NVM; + u8 count = 0; + + if (offset > ICH_FLASH_LINEAR_ADDR_MASK || + hw->mac.type != e1000_pch_spt) + return -E1000_ERR_NVM; + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + + do { + udelay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val) + break; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + ew32flash(ICH_FLASH_HSFSTS, (u32)hsflctl.regval << 16); + ew32flash(ICH_FLASH_FADDR, flash_linear_addr); + + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_READ_COMMAND_TIMEOUT); + + /* Check if FCERR is set to 1, if set to 1, clear it + * and try the whole sequence a few more times, else + * read in (shift in) the Flash Data0, the order is + * least significant byte first msb to lsb + */ + if (!ret_val) { + *data = er32flash(ICH_FLASH_FDATA0); + break; + } else { + /* If we've gotten here, then things are probably + * completely hosed, but if the error condition is + * detected, it won't hurt to give it another try... + * ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr) { + /* Repeat for some time before giving up. */ + continue; + } else if (!hsfsts.hsf_status.flcdone) { + e_dbg("Timeout error - flash cycle did not complete.\n"); + break; + } + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} + +/** * e1000_write_nvm_ich8lan - Write word(s) to the NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the word(s) to write. @@ -2908,7 +3680,7 @@ } /** - * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM + * e1000_update_nvm_checksum_spt - Update the checksum for NVM * @hw: pointer to the HW structure * * The NVM checksum is updated by calling the generic update_nvm_checksum, @@ -2918,13 +3690,13 @@ * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ -static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) +static s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 i, act_offset, new_bank_offset, old_bank_offset, bank; s32 ret_val; - u16 data; + u32 dword = 0; ret_val = e1000e_update_nvm_checksum_generic(hw); if (ret_val) @@ -2939,7 +3711,7 @@ * write to bank 0 etc. We also need to erase the segment that * is going to be written */ - ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; @@ -2958,12 +3730,175 @@ if (ret_val) goto release; } - - for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i += 2) { /* Determine whether to write the value stored * in the other NVM bank or a modified value stored * in the shadow RAM */ + ret_val = e1000_read_flash_dword_ich8lan(hw, + i + old_bank_offset, + &dword); + + if (dev_spec->shadow_ram[i].modified) { + dword &= 0xffff0000; + dword |= (dev_spec->shadow_ram[i].value & 0xffff); + } + if (dev_spec->shadow_ram[i + 1].modified) { + dword &= 0x0000ffff; + dword |= ((dev_spec->shadow_ram[i + 1].value & 0xffff) + << 16); + } + if (ret_val) + break; + + /* If the word is 0x13, then make sure the signature bits + * (15:14) are 11b until the commit has completed. + * This will allow us to write 10b which indicates the + * signature is valid. We want to do this after the write + * has completed so that we don't mark the segment valid + * while the write is still in progress + */ + if (i == E1000_ICH_NVM_SIG_WORD - 1) + dword |= E1000_ICH_NVM_SIG_MASK << 16; + + /* Convert offset to bytes. */ + act_offset = (i + new_bank_offset) << 1; + + usleep_range(100, 200); + + /* Write the data to the new bank. Offset in words */ + act_offset = i + new_bank_offset; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, + dword); + if (ret_val) + break; + } + + /* Don't bother writing the segment valid bits if sector + * programming failed. + */ + if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ + e_dbg("Flash commit failed.\n"); + goto release; + } + + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b + */ + act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; + + /*offset in words but we read dword */ + --act_offset; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0xBFFFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase + */ + act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; + + /* offset in words but we read dword */ + act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0x00FFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* Great! Everything worked, we can now clear the cached entries. */ + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { + dev_spec->shadow_ram[i].modified = false; + dev_spec->shadow_ram[i].value = 0xFFFF; + } + +release: + nvm->ops.release(hw); + + /* Reload the EEPROM, or else modifications will not appear + * until after the next adapter reset. + */ + if (!ret_val) { + nvm->ops.reload(hw); + usleep_range(10000, 20000); + } + +out: + if (ret_val) + e_dbg("NVM update error: %d\n", ret_val); + + return ret_val; +} + +/** + * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM + * @hw: pointer to the HW structure + * + * The NVM checksum is updated by calling the generic update_nvm_checksum, + * which writes the checksum to the shadow ram. The changes in the shadow + * ram are then committed to the EEPROM by processing each bank at a time + * checking for the modified bit and writing only the pending changes. + * After a successful commit, the shadow ram is cleared and is ready for + * future writes. + **/ +static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 i, act_offset, new_bank_offset, old_bank_offset, bank; + s32 ret_val; + u16 data = 0; + + ret_val = e1000e_update_nvm_checksum_generic(hw); + if (ret_val) + goto out; + + if (nvm->type != e1000_nvm_flash_sw) + goto out; + + nvm->ops.acquire(hw); + + /* We're writing to the opposite bank so if we're on bank 1, + * write to bank 0 etc. We also need to erase the segment that + * is going to be written + */ + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) { + e_dbg("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + if (bank == 0) { + new_bank_offset = nvm->flash_bank_size; + old_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); + if (ret_val) + goto release; + } else { + old_bank_offset = nvm->flash_bank_size; + new_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); + if (ret_val) + goto release; + } + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { if (dev_spec->shadow_ram[i].modified) { data = dev_spec->shadow_ram[i].value; } else { @@ -3085,6 +4020,7 @@ */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: word = NVM_COMPAT; valid_csum_mask = NVM_COMPAT_VALID_CSUM; break; @@ -3170,9 +4106,13 @@ s32 ret_val; u8 count = 0; - if (size < 1 || size > 2 || data > size * 0xff || - offset > ICH_FLASH_LINEAR_ADDR_MASK) - return -E1000_ERR_NVM; + if (hw->mac.type == e1000_pch_spt) { + if (size != 4 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } else { + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + hw->nvm.flash_base_addr); @@ -3183,12 +4123,25 @@ ret_val = e1000_flash_cycle_init_ich8lan(hw); if (ret_val) break; + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); ew32flash(ICH_FLASH_FADDR, flash_linear_addr); @@ -3227,6 +4180,90 @@ } /** +* e1000_write_flash_data32_ich8lan - Writes 4 bytes to the NVM +* @hw: pointer to the HW structure +* @offset: The offset (in bytes) of the dwords to read. +* @data: The 4 bytes to write to the NVM. +* +* Writes one/two/four bytes to the NVM using the flash access registers. +**/ +static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val; + u8 count = 0; + + if (hw->mac.type == e1000_pch_spt) { + if (offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + do { + udelay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val) + break; + + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) + >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + + ew32flash(ICH_FLASH_FADDR, flash_linear_addr); + + ew32flash(ICH_FLASH_FDATA0, data); + + /* check if FCERR is set to 1 , if set to 1, clear it + * and try the whole sequence a few more times else done + */ + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_WRITE_COMMAND_TIMEOUT); + + if (!ret_val) + break; + + /* If we're here, then things are most likely + * completely hosed, but if the error condition + * is detected, it won't hurt to give it another + * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + + if (hsfsts.hsf_status.flcerr) + /* Repeat for some time before giving up. */ + continue; + if (!hsfsts.hsf_status.flcdone) { + e_dbg("Timeout error - flash cycle did not complete.\n"); + break; + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} + +/** * e1000_write_flash_byte_ich8lan - Write a single byte to NVM * @hw: pointer to the HW structure * @offset: The index of the byte to read. @@ -3243,6 +4280,40 @@ } /** +* e1000_retry_write_flash_dword_ich8lan - Writes a dword to NVM +* @hw: pointer to the HW structure +* @offset: The offset of the word to write. +* @dword: The dword to write to the NVM. +* +* Writes a single dword to the NVM using the flash access registers. +* Goes through a retry algorithm before giving up. +**/ +static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword) +{ + s32 ret_val; + u16 program_retries; + + /* Must convert word offset into bytes. */ + offset <<= 1; + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + + if (!ret_val) + return ret_val; + for (program_retries = 0; program_retries < 100; program_retries++) { + e_dbg("Retrying Byte %8.8X at offset %u\n", dword, offset); + usleep_range(100, 200); + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + if (!ret_val) + break; + } + if (program_retries == 100) + return -E1000_ERR_NVM; + + return 0; +} + +/** * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM * @hw: pointer to the HW structure * @offset: The offset of the byte to write. @@ -3346,9 +4417,18 @@ /* Write a value 11 (block Erase) in Flash * Cycle field in hw flash control */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = + er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of an index within the * block into Flash Linear address field in Flash @@ -3767,7 +4847,8 @@ ew32(RFCTL, reg); /* Enable ECC on Lynxpoint */ - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { reg = er32(PBECCSTS); reg |= E1000_PBECCSTS_ECC_ENABLE; ew32(PBECCSTS, reg); @@ -4073,7 +5154,7 @@ { u32 reg; u16 data; - u8 retry = 0; + u8 retry = 0; if (hw->phy.type != e1000_phy_igp_3) return; @@ -4168,7 +5249,10 @@ u16 phy_reg, device_id = hw->adapter->pdev->device; if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (device_id == E1000_DEV_ID_PCH_I218_LM3) || + (device_id == E1000_DEV_ID_PCH_I218_V3) || + (hw->mac.type == e1000_pch_spt)) { u32 fextnvm6 = er32(FEXTNVM6); ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); @@ -4190,14 +5274,23 @@ /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the - * link. + * link, and enable Auto Enable LPI since there will + * be no driver to enable LPI while in Sx. */ if ((eee_advert & I82579_EEE_100_SUPPORTED) && (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) && - (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) + (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) { phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_NOND0A_LPLU); + + /* Set Auto Enable LPI after link up */ + e1e_rphy_locked(hw, + I217_LPI_GPIO_CTRL, &phy_reg); + phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI; + e1e_wphy_locked(hw, + I217_LPI_GPIO_CTRL, phy_reg); + } } /* For i217 Intel Rapid Start Technology support, @@ -4294,6 +5387,11 @@ return; } + /* Clear Auto Enable LPI after link up */ + e1e_rphy_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg); + phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI; + e1e_wphy_locked(hw, I217_LPI_GPIO_CTRL, phy_reg); + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { /* Restore clear on SMB if no manageability engine * is present @@ -4601,6 +5699,7 @@ /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { @@ -4628,6 +5727,17 @@ .write = e1000_write_nvm_ich8lan, }; +static const struct e1000_nvm_operations spt_nvm_ops = { + .acquire = e1000_acquire_nvm_ich8lan, + .release = e1000_release_nvm_ich8lan, + .read = e1000_read_nvm_spt, + .update = e1000_update_nvm_checksum_spt, + .reload = e1000e_reload_nvm_generic, + .valid_led_default = e1000_valid_led_default_ich8lan, + .validate = e1000_validate_nvm_checksum_ich8lan, + .write = e1000_write_nvm_ich8lan, +}; + const struct e1000_info e1000_ich8_info = { .mac = e1000_ich8lan, .flags = FLAG_HAS_WOL @@ -4637,7 +5747,7 @@ | FLAG_HAS_FLASH | FLAG_APME_IN_WUC, .pba = 8, - .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, + .max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -4710,7 +5820,7 @@ .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = 9018, + .max_hw_frame_size = 9022, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -4730,9 +5840,29 @@ .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = 9018, + .max_hw_frame_size = 9022, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, .nvm_ops = &ich8_nvm_ops, }; + +const struct e1000_info e1000_pch_spt_info = { + .mac = e1000_pch_spt, + .flags = FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_FLASH + | FLAG_HAS_JUMBO_FRAMES + | FLAG_APME_IN_WUC, + .flags2 = FLAG2_HAS_PHY_STATS + | FLAG2_HAS_EEE, + .pba = 26, + .max_hw_frame_size = 9022, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &spt_nvm_ops, +};