--- zzzz-none-000/linux-3.10.107/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. + Copyright(c) 1999 - 2014 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -20,6 +20,7 @@ the file called "COPYING". Contact Information: + Linux NICS e1000-devel Mailing List Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 @@ -29,7 +30,7 @@ #include #include -#include "ixgbe_common.h" +#include "ixgbe.h" #include "ixgbe_phy.h" static void ixgbe_i2c_start(struct ixgbe_hw *hw); @@ -42,10 +43,264 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); -static bool ixgbe_get_i2c_data(u32 *i2cctl); +static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl); static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); + +/** + * ixgbe_out_i2c_byte_ack - Send I2C byte with ack + * @hw: pointer to the hardware structure + * @byte: byte to send + * + * Returns an error code on error. + **/ +static s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte) +{ + s32 status; + + status = ixgbe_clock_out_i2c_byte(hw, byte); + if (status) + return status; + return ixgbe_get_i2c_ack(hw); +} + +/** + * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack + * @hw: pointer to the hardware structure + * @byte: pointer to a u8 to receive the byte + * + * Returns an error code on error. + **/ +static s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte) +{ + s32 status; + + status = ixgbe_clock_in_i2c_byte(hw, byte); + if (status) + return status; + /* ACK */ + return ixgbe_clock_out_i2c_bit(hw, false); +} + +/** + * ixgbe_ones_comp_byte_add - Perform one's complement addition + * @add1: addend 1 + * @add2: addend 2 + * + * Returns one's complement 8-bit sum. + **/ +static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2) +{ + u16 sum = add1 + add2; + + sum = (sum & 0xFF) + (sum >> 8); + return sum & 0xFF; +} + +/** + * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * @lock: true if to take and release semaphore + * + * Returns an error code on error. + */ +static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val, bool lock) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + int max_retry = 10; + int retry = 0; + u8 csum_byte; + u8 high_bits; + u8 low_bits; + u8 reg_high; + u8 csum; + + reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */ + csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF); + csum = ~csum; + do { + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + return IXGBE_ERR_SWFW_SYNC; + ixgbe_i2c_start(hw); + /* Device Address and write indication */ + if (ixgbe_out_i2c_byte_ack(hw, addr)) + goto fail; + /* Write bits 14:8 */ + if (ixgbe_out_i2c_byte_ack(hw, reg_high)) + goto fail; + /* Write bits 7:0 */ + if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF)) + goto fail; + /* Write csum */ + if (ixgbe_out_i2c_byte_ack(hw, csum)) + goto fail; + /* Re-start condition */ + ixgbe_i2c_start(hw); + /* Device Address and read indication */ + if (ixgbe_out_i2c_byte_ack(hw, addr | 1)) + goto fail; + /* Get upper bits */ + if (ixgbe_in_i2c_byte_ack(hw, &high_bits)) + goto fail; + /* Get low bits */ + if (ixgbe_in_i2c_byte_ack(hw, &low_bits)) + goto fail; + /* Get csum */ + if (ixgbe_clock_in_i2c_byte(hw, &csum_byte)) + goto fail; + /* NACK */ + if (ixgbe_clock_out_i2c_bit(hw, false)) + goto fail; + ixgbe_i2c_stop(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + *val = (high_bits << 8) | low_bits; + return 0; + +fail: + ixgbe_i2c_bus_clear(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte read combined error - Retry.\n"); + else + hw_dbg(hw, "I2C byte read combined error.\n"); + } while (retry < max_retry); + + return IXGBE_ERR_I2C; +} + +/** + * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + */ +s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + */ +s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * @lock: true if to take and release semaphore + * + * Returns an error code on error. + */ +static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 val, bool lock) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + int max_retry = 1; + int retry = 0; + u8 reg_high; + u8 csum; + + reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */ + csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF); + csum = ixgbe_ones_comp_byte_add(csum, val >> 8); + csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF); + csum = ~csum; + do { + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + return IXGBE_ERR_SWFW_SYNC; + ixgbe_i2c_start(hw); + /* Device Address and write indication */ + if (ixgbe_out_i2c_byte_ack(hw, addr)) + goto fail; + /* Write bits 14:8 */ + if (ixgbe_out_i2c_byte_ack(hw, reg_high)) + goto fail; + /* Write bits 7:0 */ + if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF)) + goto fail; + /* Write data 15:8 */ + if (ixgbe_out_i2c_byte_ack(hw, val >> 8)) + goto fail; + /* Write data 7:0 */ + if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF)) + goto fail; + /* Write csum */ + if (ixgbe_out_i2c_byte_ack(hw, csum)) + goto fail; + ixgbe_i2c_stop(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + return 0; + +fail: + ixgbe_i2c_bus_clear(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte write combined error - Retry.\n"); + else + hw_dbg(hw, "I2C byte write combined error.\n"); + } while (retry < max_retry); + + return IXGBE_ERR_I2C; +} + +/** + * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + */ +s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + */ +s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); +} /** * ixgbe_identify_phy_generic - Get physical layer module @@ -55,17 +310,23 @@ **/ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) { - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; u32 phy_addr; u16 ext_ability = 0; + if (!hw->phy.phy_semaphore_mask) { + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + } + if (hw->phy.type == ixgbe_phy_unknown) { for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { hw->phy.mdio.prtad = phy_addr; if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) { ixgbe_get_phy_id(hw); hw->phy.type = - ixgbe_get_phy_type_from_id(hw->phy.id); + ixgbe_get_phy_type_from_id(hw->phy.id); if (hw->phy.type == ixgbe_phy_unknown) { hw->phy.ops.read_reg(hw, @@ -82,18 +343,40 @@ ixgbe_phy_generic; } - status = 0; - break; + return 0; } } /* clear value if nothing found */ - if (status != 0) - hw->phy.mdio.prtad = 0; - } else { - status = 0; + hw->phy.mdio.prtad = 0; + return IXGBE_ERR_PHY_ADDR_INVALID; } + return 0; +} - return status; +/** + * ixgbe_check_reset_blocked - check status of MNG FW veto bit + * @hw: pointer to the hardware structure + * + * This function checks the MMNGC.MNG_VETO bit to see if there are + * any constraints on link from manageability. For MAC's that don't + * have this bit just return false since the link can not be blocked + * via this method. + **/ +bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw) +{ + u32 mmngc; + + /* If we don't have this bit, it can't be blocking */ + if (hw->mac.type == ixgbe_mac_82598EB) + return false; + + mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC); + if (mmngc & IXGBE_MMNGC_MNG_VETO) { + hw_dbg(hw, "MNG_VETO bit detected.\n"); + return true; + } + + return false; } /** @@ -103,17 +386,17 @@ **/ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) { - u32 status; + s32 status; u16 phy_id_high = 0; u16 phy_id_low = 0; status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD, - &phy_id_high); + &phy_id_high); - if (status == 0) { + if (!status) { hw->phy.id = (u32)(phy_id_high << 16); status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD, - &phy_id_low); + &phy_id_low); hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); } @@ -133,6 +416,7 @@ case TN1010_PHY_ID: phy_type = ixgbe_phy_tn; break; + case X550_PHY_ID: case X540_PHY_ID: phy_type = ixgbe_phy_aq; break; @@ -142,6 +426,9 @@ case ATH_PHY_ID: phy_type = ixgbe_phy_nl; break; + case X557_PHY_ID: + phy_type = ixgbe_phy_x550em_ext_t; + break; default: phy_type = ixgbe_phy_unknown; break; @@ -164,12 +451,16 @@ status = ixgbe_identify_phy_generic(hw); if (status != 0 || hw->phy.type == ixgbe_phy_none) - goto out; + return status; /* Don't reset PHY if it's shut down due to overtemp. */ if (!hw->phy.reset_if_overtemp && (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) - goto out; + return 0; + + /* Blocked by MNG FW so bail */ + if (ixgbe_check_reset_blocked(hw)) + return 0; /* * Perform soft PHY reset to the PHY_XS. @@ -195,200 +486,205 @@ } if (ctrl & MDIO_CTRL1_RESET) { - status = IXGBE_ERR_RESET_FAILED; hw_dbg(hw, "PHY reset polling failed to complete.\n"); + return IXGBE_ERR_RESET_FAILED; } -out: - return status; + return 0; } /** - * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without + * the SWFW lock * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read * @phy_data: Pointer to read data from PHY register **/ -s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 *phy_data) +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data) { - u32 command; - u32 i; - u32 data; - s32 status = 0; - u16 gssr; + u32 i, data, command; - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + return IXGBE_ERR_PHY; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + /* Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - if (status == 0) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + return IXGBE_ERR_PHY; + } - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + /* Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + return 0; +} - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } +/** + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * using the SWFW lock - this function is needed in most cases + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + s32 status; + u32 gssr = hw->phy.phy_semaphore_mask; + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); + } else { + return IXGBE_ERR_SWFW_SYNC; } return status; } /** - * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register + * without SWFW lock * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 5 bit device type * @phy_data: Data to write to the PHY register **/ -s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 phy_data) +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) { - u32 command; - u32 i; - s32 status = 0; - u16 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; + u32 i, command; - if (status == 0) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - if (status == 0) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY write cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + return 0; +} - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } +/** + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * using SWFW lock- this function is needed in most cases + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + s32 status; + u32 gssr = hw->phy.phy_semaphore_mask; + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); + } else { + return IXGBE_ERR_SWFW_SYNC; } return status; @@ -403,8 +699,6 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) { s32 status = 0; - u32 time_out; - u32 max_time_out = 10; u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; bool autoneg = false; ixgbe_link_speed speed; @@ -459,6 +753,10 @@ autoneg_reg); } + /* Blocked by MNG FW so don't reset PHY */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + /* Restart PHY autonegotiation and wait for completion */ hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg); @@ -468,25 +766,6 @@ hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg); - /* Wait for autonegotiation to finish */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, MDIO_STAT1, - MDIO_MMD_AN, - &autoneg_reg); - - autoneg_reg &= MDIO_AN_STAT1_COMPLETE; - if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) { - break; - } - } - - if (time_out == max_time_out) { - status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); - } - return status; } @@ -496,8 +775,8 @@ * @speed: new link speed **/ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { /* @@ -522,35 +801,61 @@ } /** + * ixgbe_get_copper_speeds_supported - Get copper link speed from phy + * @hw: pointer to hardware structure + * + * Determines the supported link capabilities by reading the PHY auto + * negotiation register. + */ +static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw) +{ + u16 speed_ability; + s32 status; + + status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, + &speed_ability); + if (status) + return status; + + if (speed_ability & MDIO_SPEED_10G) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_1000) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_100) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL; + + switch (hw->mac.type) { + case ixgbe_mac_X550: + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL; + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL; + break; + case ixgbe_mac_X550EM_x: + hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL; + break; + default: + break; + } + + return 0; +} + +/** * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed * @autoneg: boolean auto-negotiation value - * - * Determines the link capabilities by reading the AUTOC register. */ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) + ixgbe_link_speed *speed, + bool *autoneg) { - s32 status = IXGBE_ERR_LINK_SETUP; - u16 speed_ability; + s32 status = 0; - *speed = 0; *autoneg = true; + if (!hw->phy.speeds_supported) + status = ixgbe_get_copper_speeds_supported(hw); - status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, - &speed_ability); - - if (status == 0) { - if (speed_ability & MDIO_SPEED_10G) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & MDIO_PMA_SPEED_1000) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - if (speed_ability & MDIO_PMA_SPEED_100) - *speed |= IXGBE_LINK_SPEED_100_FULL; - } - + *speed = hw->phy.speeds_supported; return status; } @@ -564,7 +869,7 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up) { - s32 status = 0; + s32 status; u32 time_out; u32 max_time_out = 10; u16 phy_link = 0; @@ -607,12 +912,12 @@ * @hw: pointer to hardware structure * * Restart autonegotiation and PHY and waits for completion. + * This function always returns success, this is nessary since + * it is called via a function pointer that could call other + * functions that could return an error. **/ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) { - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; bool autoneg = false; ixgbe_link_speed speed; @@ -665,6 +970,10 @@ autoneg_reg); } + /* Blocked by MNG FW so don't reset PHY */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + /* Restart PHY autonegotiation and wait for completion */ hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg); @@ -673,26 +982,7 @@ hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg); - - /* Wait for autonegotiation to finish */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, MDIO_STAT1, - MDIO_MMD_AN, - &autoneg_reg); - - autoneg_reg &= MDIO_AN_STAT1_COMPLETE; - if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) - break; - } - - if (time_out == max_time_out) { - status = IXGBE_ERR_LINK_SETUP; - hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); - } - - return status; + return 0; } /** @@ -703,7 +993,7 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, u16 *firmware_version) { - s32 status = 0; + s32 status; status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1, @@ -720,7 +1010,7 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, u16 *firmware_version) { - s32 status = 0; + s32 status; status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1, @@ -739,18 +1029,22 @@ bool end_data = false; u16 list_offset, data_offset; u16 phy_data = 0; - s32 ret_val = 0; + s32 ret_val; u32 i; + /* Blocked by MNG FW so bail */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data); /* reset the PHY and poll for completion */ hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, - (phy_data | MDIO_CTRL1_RESET)); + (phy_data | MDIO_CTRL1_RESET)); for (i = 0; i < 100; i++) { hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, - &phy_data); + &phy_data); if ((phy_data & MDIO_CTRL1_RESET) == 0) break; usleep_range(10000, 20000); @@ -758,15 +1052,14 @@ if ((phy_data & MDIO_CTRL1_RESET) != 0) { hw_dbg(hw, "PHY reset did not complete.\n"); - ret_val = IXGBE_ERR_PHY; - goto out; + return IXGBE_ERR_PHY; } /* Get init offsets */ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); - if (ret_val != 0) - goto out; + &data_offset); + if (ret_val) + return ret_val; ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); data_offset++; @@ -775,8 +1068,10 @@ * Read control word from PHY init contents offset */ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + if (ret_val) + goto err_eeprom; control = (eword & IXGBE_CONTROL_MASK_NL) >> - IXGBE_CONTROL_SHIFT_NL; + IXGBE_CONTROL_SHIFT_NL; edata = eword & IXGBE_DATA_MASK_NL; switch (control) { case IXGBE_DELAY_NL: @@ -787,12 +1082,17 @@ case IXGBE_DATA_NL: hw_dbg(hw, "DATA:\n"); data_offset++; - hw->eeprom.ops.read(hw, data_offset++, - &phy_offset); + ret_val = hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + if (ret_val) + goto err_eeprom; for (i = 0; i < edata; i++) { - hw->eeprom.ops.read(hw, data_offset, &eword); + ret_val = hw->eeprom.ops.read(hw, data_offset, + &eword); + if (ret_val) + goto err_eeprom; hw->phy.ops.write_reg(hw, phy_offset, - MDIO_MMD_PMAPMD, eword); + MDIO_MMD_PMAPMD, eword); hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, phy_offset); data_offset++; @@ -809,19 +1109,41 @@ hw_dbg(hw, "SOL\n"); } else { hw_dbg(hw, "Bad control value\n"); - ret_val = IXGBE_ERR_PHY; - goto out; + return IXGBE_ERR_PHY; } break; default: hw_dbg(hw, "Bad control type\n"); - ret_val = IXGBE_ERR_PHY; - goto out; + return IXGBE_ERR_PHY; } } -out: return ret_val; + +err_eeprom: + hw_err(hw, "eeprom read at offset %d failed\n", data_offset); + return IXGBE_ERR_PHY; +} + +/** + * ixgbe_identify_module_generic - Identifies module type + * @hw: pointer to hardware structure + * + * Determines HW type and calls appropriate function. + **/ +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) +{ + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + return ixgbe_identify_sfp_module_generic(hw); + case ixgbe_media_type_fiber_qsfp: + return ixgbe_identify_qsfp_module_generic(hw); + default: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + return IXGBE_ERR_SFP_NOT_PRESENT; + } + + return IXGBE_ERR_SFP_NOT_PRESENT; } /** @@ -833,7 +1155,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) { struct ixgbe_adapter *adapter = hw->back; - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + s32 status; u32 vendor_oui = 0; enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; u8 identifier = 0; @@ -846,262 +1168,426 @@ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { hw->phy.sfp_type = ixgbe_sfp_type_not_present; - status = IXGBE_ERR_SFP_NOT_PRESENT; - goto out; + return IXGBE_ERR_SFP_NOT_PRESENT; } + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &identifier); - if (status != 0) + if (status) goto err_read_i2c_eeprom; - /* LAN ID is needed for sfp_type determination */ - hw->mac.ops.set_lan_id(hw); - if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { hw->phy.type = ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + + if (status) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + + if (status) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_CABLE_TECHNOLOGY, + &cable_tech); + + if (status) + goto err_read_i2c_eeprom; + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific + * 11 SFP_1g_sx_CORE0 - 82599-specific + * 12 SFP_1g_sx_CORE1 - 82599-specific + */ + if (hw->mac.type == ixgbe_mac_82598EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; } else { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core1; + } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { + hw->phy.ops.read_i2c_eeprom( + hw, IXGBE_SFF_CABLE_SPEC_COMP, + &cable_spec); + if (cable_spec & + IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + hw->phy.sfp_type = + ixgbe_sfp_type_unknown; + } + } else if (comp_codes_10g & + (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_lx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_lx_core1; + } else { + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } + } + + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the SFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor */ + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = identifier; status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_1GBE_COMP_CODES, - &comp_codes_1g); + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); if (status != 0) goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_CABLE_TECHNOLOGY, - &cable_tech); + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); if (status != 0) goto err_read_i2c_eeprom; - /* ID Module - * ========= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR - * 3 SFP_DA_CORE0 - 82599-specific - * 4 SFP_DA_CORE1 - 82599-specific - * 5 SFP_SR/LR_CORE0 - 82599-specific - * 6 SFP_SR/LR_CORE1 - 82599-specific - * 7 SFP_act_lmt_DA_CORE0 - 82599-specific - * 8 SFP_act_lmt_DA_CORE1 - 82599-specific - * 9 SFP_1g_cu_CORE0 - 82599-specific - * 10 SFP_1g_cu_CORE1 - 82599-specific - * 11 SFP_1g_sx_CORE0 - 82599-specific - * 12 SFP_1g_sx_CORE1 - 82599-specific - */ - if (hw->mac.type == ixgbe_mac_82598EB) { + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.sfp_type = ixgbe_sfp_type_da_cu; - else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_sr; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_lr; + hw->phy.type = + ixgbe_phy_sfp_passive_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = ixgbe_phy_sfp_ftl_active; else - hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } else if (hw->mac.type == ixgbe_mac_82599EB) { - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_da_cu_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_da_cu_core1; - } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { - hw->phy.ops.read_i2c_eeprom( - hw, IXGBE_SFF_CABLE_SPEC_COMP, - &cable_spec); - if (cable_spec & - IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_da_act_lmt_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_da_act_lmt_core1; - } else { - hw->phy.sfp_type = - ixgbe_sfp_type_unknown; - } - } else if (comp_codes_10g & - (IXGBE_SFF_10GBASESR_CAPABLE | - IXGBE_SFF_10GBASELR_CAPABLE)) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core1; - } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_1g_cu_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_1g_cu_core1; - } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_1g_sx_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_1g_sx_core1; - } else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) { - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_1g_lx_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_1g_lx_core1; - } else { - hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + case IXGBE_SFF_VENDOR_OUI_INTEL: + hw->phy.type = ixgbe_phy_sfp_intel; + break; + default: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_unknown; + else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_active_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; } + } - if (hw->phy.sfp_type != stored_sfp_type) - hw->phy.sfp_setup_needed = true; + /* Allow any DA cable vendor */ + if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | + IXGBE_SFF_DA_ACTIVE_CABLE)) + return 0; + + /* Verify supported 1G SFP modules */ + if (comp_codes_10g == 0 && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } - /* Determine if the SFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; - if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && - (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || - ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && - (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) - hw->phy.multispeed_fiber = true; - - /* Determine PHY vendor */ - if (hw->phy.type != ixgbe_phy_nl) { - hw->phy.id = identifier; - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE0, - &oui_bytes[0]); - - if (status != 0) - goto err_read_i2c_eeprom; - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE1, - &oui_bytes[1]); - - if (status != 0) - goto err_read_i2c_eeprom; - - status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE2, - &oui_bytes[2]); - - if (status != 0) - goto err_read_i2c_eeprom; - - vendor_oui = - ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | - (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | - (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); - - switch (vendor_oui) { - case IXGBE_SFF_VENDOR_OUI_TYCO: - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_passive_tyco; - break; - case IXGBE_SFF_VENDOR_OUI_FTL: - if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) - hw->phy.type = ixgbe_phy_sfp_ftl_active; - else - hw->phy.type = ixgbe_phy_sfp_ftl; - break; - case IXGBE_SFF_VENDOR_OUI_AVAGO: - hw->phy.type = ixgbe_phy_sfp_avago; - break; - case IXGBE_SFF_VENDOR_OUI_INTEL: - hw->phy.type = ixgbe_phy_sfp_intel; - break; - default: - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_passive_unknown; - else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) - hw->phy.type = - ixgbe_phy_sfp_active_unknown; - else - hw->phy.type = ixgbe_phy_sfp_unknown; - break; - } + /* Anything else 82598-based is supported */ + if (hw->mac.type == ixgbe_mac_82598EB) + return 0; + + hw->mac.ops.get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_sfp_intel) + return 0; + if (hw->allow_unsupported_sfp) { + e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n"); + return 0; } + hw_dbg(hw, "SFP+ module not supported\n"); + hw->phy.type = ixgbe_phy_sfp_unsupported; + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + return 0; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + } + return IXGBE_ERR_SFP_NOT_PRESENT; +} + +/** + * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the QSFP module and assigns appropriate PHY type + **/ +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + s32 status; + u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[3] = {0, 0, 0}; + u16 enforce_sfp = 0; + u8 connector = 0; + u8 cable_length = 0; + u8 device_tech = 0; + bool active_cable = false; - /* Allow any DA cable vendor */ - if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | - IXGBE_SFF_DA_ACTIVE_CABLE)) { - status = 0; - goto out; + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + return IXGBE_ERR_SFP_NOT_PRESENT; + } + + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status != 0) + goto err_read_i2c_eeprom; + + if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + hw->phy.id = identifier; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP, + &comp_codes_10g); + + if (status != 0) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP, + &comp_codes_1g); + + if (status != 0) + goto err_read_i2c_eeprom; + + if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) { + hw->phy.type = ixgbe_phy_qsfp_passive_unknown; + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1; + } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1; + } else { + if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) + active_cable = true; + + if (!active_cable) { + /* check for active DA cables that pre-date + * SFF-8436 v3.6 + */ + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_CONNECTOR, + &connector); + + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_CABLE_LENGTH, + &cable_length); + + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_DEVICE_TECH, + &device_tech); + + if ((connector == + IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) && + (cable_length > 0) && + ((device_tech >> 4) == + IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL)) + active_cable = true; } - /* Verify supported 1G SFP modules */ - if (comp_codes_10g == 0 && - !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + if (active_cable) { + hw->phy.type = ixgbe_phy_qsfp_active_unknown; + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + /* unsupported module type */ hw->phy.type = ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - goto out; + return IXGBE_ERR_SFP_NOT_SUPPORTED; } + } - /* Anything else 82598-based is supported */ - if (hw->mac.type == ixgbe_mac_82598EB) { - status = 0; - goto out; - } + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the QSFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor for optical modules */ + if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + + if (status != 0) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + + if (status != 0) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + if (status != 0) + goto err_read_i2c_eeprom; + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL) + hw->phy.type = ixgbe_phy_qsfp_intel; + else + hw->phy.type = ixgbe_phy_qsfp_unknown; hw->mac.ops.get_device_caps(hw, &enforce_sfp); - if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && - !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) { /* Make sure we're a supported PHY type */ - if (hw->phy.type == ixgbe_phy_sfp_intel) { - status = 0; - } else { - if (hw->allow_unsupported_sfp) { - e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules."); - status = 0; - } else { - hw_dbg(hw, - "SFP+ module not supported\n"); - hw->phy.type = - ixgbe_phy_sfp_unsupported; - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - } + if (hw->phy.type == ixgbe_phy_qsfp_intel) + return 0; + if (hw->allow_unsupported_sfp) { + e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n"); + return 0; } - } else { - status = 0; + hw_dbg(hw, "QSFP module not supported\n"); + hw->phy.type = ixgbe_phy_sfp_unsupported; + return IXGBE_ERR_SFP_NOT_SUPPORTED; } + return 0; } - -out: - return status; + return 0; err_read_i2c_eeprom: hw->phy.sfp_type = ixgbe_sfp_type_not_present; - if (hw->phy.type != ixgbe_phy_nl) { - hw->phy.id = 0; - hw->phy.type = ixgbe_phy_unknown; - } + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + return IXGBE_ERR_SFP_NOT_PRESENT; } @@ -1115,8 +1601,8 @@ * so it returns the offsets to the phy init sequence block. **/ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, - u16 *list_offset, - u16 *data_offset) + u16 *list_offset, + u16 *data_offset) { u16 sfp_id; u16 sfp_type = hw->phy.sfp_type; @@ -1147,7 +1633,11 @@ sfp_type = ixgbe_sfp_type_srlr_core1; /* Read offset to PHY init contents */ - hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { + hw_err(hw, "eeprom read at %d failed\n", + IXGBE_PHY_INIT_OFFSET_NL); + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + } if ((!*list_offset) || (*list_offset == 0xFFFF)) return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; @@ -1159,12 +1649,14 @@ * Find the matching SFP ID in the EEPROM * and program the init sequence */ - hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + goto err_phy; while (sfp_id != IXGBE_PHY_INIT_END_NL) { if (sfp_id == sfp_type) { (*list_offset)++; - hw->eeprom.ops.read(hw, *list_offset, data_offset); + if (hw->eeprom.ops.read(hw, *list_offset, data_offset)) + goto err_phy; if ((!*data_offset) || (*data_offset == 0xFFFF)) { hw_dbg(hw, "SFP+ module not supported\n"); return IXGBE_ERR_SFP_NOT_SUPPORTED; @@ -1174,7 +1666,7 @@ } else { (*list_offset) += 2; if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) - return IXGBE_ERR_PHY; + goto err_phy; } } @@ -1184,6 +1676,10 @@ } return 0; + +err_phy: + hw_err(hw, "eeprom read at offset %d failed\n", *list_offset); + return IXGBE_ERR_PHY; } /** @@ -1195,11 +1691,11 @@ * Performs byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) + u8 *eeprom_data) { return hw->phy.ops.read_i2c_byte(hw, byte_offset, - IXGBE_I2C_EEPROM_DEV_ADDR, - eeprom_data); + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); } /** @@ -1227,42 +1723,55 @@ * Performs byte write operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 eeprom_data) + u8 eeprom_data) { return hw->phy.ops.write_i2c_byte(hw, byte_offset, - IXGBE_I2C_EEPROM_DEV_ADDR, - eeprom_data); + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); } /** - * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * ixgbe_is_sfp_probe - Returns true if SFP is being detected + * @hw: pointer to hardware structure + * @offset: eeprom offset to be read + * @addr: I2C address to be read + */ +static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) +{ + if (addr == IXGBE_I2C_EEPROM_DEV_ADDR && + offset == IXGBE_SFF_IDENTIFIER && + hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return true; + return false; +} + +/** + * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read * @data: value read + * @lock: true if to take and release semaphore * * Performs byte read operation to SFP module's EEPROM over I2C interface at * a specified device address. - **/ -s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) + */ +static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data, bool lock) { - s32 status = 0; + s32 status; u32 max_retry = 10; u32 retry = 0; - u16 swfw_mask = 0; + u32 swfw_mask = hw->phy.phy_semaphore_mask; bool nack = true; - *data = 0; - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - swfw_mask = IXGBE_GSSR_PHY1_SM; - else - swfw_mask = IXGBE_GSSR_PHY0_SM; + if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr)) + max_retry = IXGBE_SFP_DETECT_RETRIES; + + *data = 0; do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { - status = IXGBE_ERR_SWFW_SYNC; - goto read_byte_out; - } + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + return IXGBE_ERR_SWFW_SYNC; ixgbe_i2c_start(hw); @@ -1303,12 +1812,16 @@ goto fail; ixgbe_i2c_stop(hw); - break; + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + return 0; fail: ixgbe_i2c_bus_clear(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msleep(100); + if (lock) { + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(100); + } retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte read error - Retrying.\n"); @@ -1317,38 +1830,61 @@ } while (retry < max_retry); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -read_byte_out: return status; } /** - * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, true); +} + +/** + * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, false); +} + +/** + * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write * @data: value to write + * @lock: true if to take and release semaphore * * Performs byte write operation to SFP module's EEPROM over I2C interface at * a specified device address. - **/ -s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) + */ +static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data, bool lock) { - s32 status = 0; + s32 status; u32 max_retry = 1; u32 retry = 0; - u16 swfw_mask = 0; + u32 swfw_mask = hw->phy.phy_semaphore_mask; - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - swfw_mask = IXGBE_GSSR_PHY1_SM; - else - swfw_mask = IXGBE_GSSR_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { - status = IXGBE_ERR_SWFW_SYNC; - goto write_byte_out; - } + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + return IXGBE_ERR_SWFW_SYNC; do { ixgbe_i2c_start(hw); @@ -1378,7 +1914,9 @@ goto fail; ixgbe_i2c_stop(hw); - break; + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + return 0; fail: ixgbe_i2c_bus_clear(hw); @@ -1389,21 +1927,56 @@ hw_dbg(hw, "I2C byte write error.\n"); } while (retry < max_retry); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); -write_byte_out: return status; } /** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, true); +} + +/** + * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, false); +} + +/** * ixgbe_i2c_start - Sets I2C start condition * @hw: pointer to hardware structure * * Sets I2C start condition (High -> Low on SDA while SCL is High) + * Set bit-bang mode on X550 hardware. **/ static void ixgbe_i2c_start(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + + i2cctl |= IXGBE_I2C_BB_EN(hw); /* Start condition must begin with data and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 1); @@ -1429,10 +2002,15 @@ * @hw: pointer to hardware structure * * Sets I2C stop condition (Low -> High on SDA while SCL is High) + * Disables bit-bang mode and negates data output enable on X550 + * hardware. **/ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); + u32 bb_en_bit = IXGBE_I2C_BB_EN(hw); /* Stop condition must begin with data low and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 0); @@ -1445,6 +2023,13 @@ /* bus free time between stop and start (4.7us)*/ udelay(IXGBE_I2C_T_BUF); + + if (bb_en_bit || data_oe_bit || clk_oe_bit) { + i2cctl &= ~bb_en_bit; + i2cctl |= data_oe_bit | clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } } /** @@ -1459,6 +2044,7 @@ s32 i; bool bit = false; + *data = 0; for (i = 7; i >= 0; i--) { ixgbe_clock_in_i2c_bit(hw, &bit); *data |= bit << i; @@ -1476,7 +2062,7 @@ **/ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) { - s32 status = 0; + s32 status; s32 i; u32 i2cctl; bool bit = false; @@ -1490,9 +2076,10 @@ } /* Release SDA line (set high) */ - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - i2cctl |= IXGBE_I2C_DATA_OUT; - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= IXGBE_I2C_DATA_OE_N_EN(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); IXGBE_WRITE_FLUSH(hw); return status; @@ -1506,23 +2093,29 @@ **/ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); s32 status = 0; u32 i = 0; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); u32 timeout = 10; bool ack = true; + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); - /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); /* Poll for ACK. Note that ACK in I2C spec is * transition from 1 to 0 */ for (i = 0; i < timeout; i++) { - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - ack = ixgbe_get_i2c_data(&i2cctl); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + ack = ixgbe_get_i2c_data(hw, &i2cctl); udelay(1); if (ack == 0) @@ -1551,15 +2144,22 @@ **/ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - *data = ixgbe_get_i2c_data(&i2cctl); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + *data = ixgbe_get_i2c_data(hw, &i2cctl); ixgbe_lower_i2c_clk(hw, &i2cctl); @@ -1579,7 +2179,7 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) { s32 status; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); status = ixgbe_set_i2c_data(hw, &i2cctl, data); if (status == 0) { @@ -1595,11 +2195,11 @@ */ udelay(IXGBE_I2C_T_LOW); } else { - status = IXGBE_ERR_I2C; hw_dbg(hw, "I2C data was not set to %X\n", data); + return IXGBE_ERR_I2C; } - return status; + return 0; } /** * ixgbe_raise_i2c_clk - Raises the I2C SCL clock @@ -1607,22 +2207,29 @@ * @i2cctl: Current value of I2CCTL register * * Raises the I2C clock line '0'->'1' + * Negates the I2C clock output enable on X550 hardware. **/ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); u32 i = 0; u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; u32 i2cctl_r = 0; + if (clk_oe_bit) { + *i2cctl |= clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + } + for (i = 0; i < timeout; i++) { - *i2cctl |= IXGBE_I2C_CLK_OUT; - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + *i2cctl |= IXGBE_I2C_CLK_OUT(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL rise time (1000ns) */ udelay(IXGBE_I2C_T_RISE); - i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - if (i2cctl_r & IXGBE_I2C_CLK_IN) + i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + if (i2cctl_r & IXGBE_I2C_CLK_IN(hw)) break; } } @@ -1633,13 +2240,15 @@ * @i2cctl: Current value of I2CCTL register * * Lowers the I2C clock line '1'->'0' + * Asserts the I2C clock output enable on X550 hardware. **/ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { - *i2cctl &= ~IXGBE_I2C_CLK_OUT; + *i2cctl &= ~IXGBE_I2C_CLK_OUT(hw); + *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL fall time (300ns) */ @@ -1653,30 +2262,40 @@ * @data: I2C data value (0 or 1) to set * * Sets the I2C data bit + * Asserts the I2C data output enable on X550 hardware. **/ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) { - s32 status = 0; + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); if (data) - *i2cctl |= IXGBE_I2C_DATA_OUT; + *i2cctl |= IXGBE_I2C_DATA_OUT(hw); else - *i2cctl &= ~IXGBE_I2C_DATA_OUT; + *i2cctl &= ~IXGBE_I2C_DATA_OUT(hw); + *i2cctl &= ~data_oe_bit; - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + if (!data) /* Can't verify data in this case */ + return 0; + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + } + /* Verify data was set correctly */ - *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); - if (data != ixgbe_get_i2c_data(i2cctl)) { - status = IXGBE_ERR_I2C; + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + if (data != ixgbe_get_i2c_data(hw, i2cctl)) { hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); + return IXGBE_ERR_I2C; } - return status; + return 0; } /** @@ -1685,17 +2304,22 @@ * @i2cctl: Current value of I2CCTL register * * Returns the I2C data bit value + * Negates the I2C data output enable on X550 hardware. **/ -static bool ixgbe_get_i2c_data(u32 *i2cctl) +static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) { - bool data; + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); - if (*i2cctl & IXGBE_I2C_DATA_IN) - data = true; - else - data = false; + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + udelay(IXGBE_I2C_T_FALL); + } - return data; + if (*i2cctl & IXGBE_I2C_DATA_IN(hw)) + return true; + return false; } /** @@ -1707,10 +2331,11 @@ **/ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i2cctl; u32 i; ixgbe_i2c_start(hw); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ixgbe_set_i2c_data(hw, &i2cctl, 1); @@ -1740,20 +2365,50 @@ **/ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) { - s32 status = 0; u16 phy_data = 0; if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) - goto out; + return 0; /* Check that the LASI temp alarm status was triggered */ hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, - MDIO_MMD_PMAPMD, &phy_data); + MDIO_MMD_PMAPMD, &phy_data); if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) - goto out; + return 0; + + return IXGBE_ERR_OVERTEMP; +} + +/** ixgbe_set_copper_phy_power - Control power for copper phy + * @hw: pointer to hardware structure + * @on: true for on, false for off + **/ +s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) +{ + u32 status; + u16 reg; + + /* Bail if we don't have copper phy */ + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + if (on) { + reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } else { + if (ixgbe_check_reset_blocked(hw)) + return 0; + reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } - status = IXGBE_ERR_OVERTEMP; -out: + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); return status; }