--- zzzz-none-000/linux-3.10.107/drivers/net/irda/w83977af_ir.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/irda/w83977af_ir.c	2021-02-04 17:41:59.000000000 +0000
@@ -62,10 +62,6 @@
 #include "w83977af.h"
 #include "w83977af_ir.h"
 
-#ifdef  CONFIG_ARCH_NETWINDER            /* Adjust to NetWinder differences */
-#undef  CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
-#define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
-#endif
 #define CONFIG_USE_W977_PNP        /* Currently needed */
 #define PIO_MAX_SPEED       115200 
 
@@ -114,8 +110,6 @@
 {
         int i;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
 		if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
 			return 0;
@@ -133,8 +127,6 @@
 {
 	int i;
 
-        IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
 			w83977af_close(dev_self[i]);
@@ -161,12 +153,10 @@
         struct w83977af_ir *self;
 	int err;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	/* Lock the port that we need */
 	if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
-		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-		      __func__ , iobase);
+		pr_debug("%s(), can't get iobase of 0x%03x\n",
+			 __func__ , iobase);
 		return -ENODEV;
 	}
 
@@ -215,16 +205,16 @@
 	
 	/* Allocate memory if needed */
 	self->rx_buff.head =
-		dma_alloc_coherent(NULL, self->rx_buff.truesize,
-				   &self->rx_buff_dma, GFP_KERNEL | __GFP_ZERO);
+		dma_zalloc_coherent(NULL, self->rx_buff.truesize,
+				    &self->rx_buff_dma, GFP_KERNEL);
 	if (self->rx_buff.head == NULL) {
 		err = -ENOMEM;
 		goto err_out1;
 	}
 
 	self->tx_buff.head =
-		dma_alloc_coherent(NULL, self->tx_buff.truesize,
-				   &self->tx_buff_dma, GFP_KERNEL | __GFP_ZERO);
+		dma_zalloc_coherent(NULL, self->tx_buff.truesize,
+				    &self->tx_buff_dma, GFP_KERNEL);
 	if (self->tx_buff.head == NULL) {
 		err = -ENOMEM;
 		goto err_out2;
@@ -240,10 +230,11 @@
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__);
+		net_err_ratelimited("%s(), register_netdevice() failed!\n",
+				    __func__);
 		goto err_out3;
 	}
-	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+	net_info_ratelimited("IrDA: Registered device %s\n", dev->name);
 
 	/* Need to store self somewhere */
 	dev_self[i] = self;
@@ -272,8 +263,6 @@
 {
 	int iobase;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
         iobase = self->io.fir_base;
 
 #ifdef CONFIG_USE_W977_PNP
@@ -292,8 +281,8 @@
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-	      __func__ , self->io.fir_base);
+	pr_debug("%s(), Releasing Region %03x\n",
+		 __func__ , self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -315,7 +304,6 @@
 	int i;
   	
  	for (i=0; i < 2; i++) {
-		IRDA_DEBUG( 0, "%s()\n", __func__ );
 #ifdef CONFIG_USE_W977_PNP
  		/* Enter PnP configuration mode */
 		w977_efm_enter(efbase[i]);
@@ -332,7 +320,7 @@
  		w977_write_reg(0x74, dma+1, efbase[i]);
 #else
  		w977_write_reg(0x74, dma, efbase[i]);   
-#endif /*CONFIG_ARCH_NETWINDER */
+#endif /* CONFIG_ARCH_NETWINDER */
  		w977_write_reg(0x75, 0x04, efbase[i]);  /* Disable Tx DMA */
   	
  		/* Set append hardware CRC, enable IR bank selection */	
@@ -396,13 +384,13 @@
 			switch_bank(iobase, SET7);
 			outb(0x40, iobase+7);
 			
-			IRDA_MESSAGE("W83977AF (IR) driver loaded. "
-				     "Version: 0x%02x\n", version);
+			net_info_ratelimited("W83977AF (IR) driver loaded. Version: 0x%02x\n",
+					     version);
 			
 			return 0;
 		} else {
 			/* Try next extented function register address */
-			IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
+			pr_debug("%s(), Wrong chip version", __func__);
 		}
   	}   	
 	return -1;
@@ -438,19 +426,19 @@
 	case 115200: outb(0x01, iobase+ABLL); break;
 	case 576000:
 		ir_mode = HCR_MIR_576;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
+		pr_debug("%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		ir_mode = HCR_MIR_1152;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
+		pr_debug("%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
+		pr_debug("%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
+		pr_debug("%s(), unknown baud rate of %d\n", __func__ , speed);
 		break;
 	}
 
@@ -501,8 +489,8 @@
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
-		   (int) skb->len);
+	pr_debug("%s(%ld), skb->len=%d\n", __func__ , jiffies,
+		 (int)skb->len);
 	
 	/* Lock transmit buffer */
 	netif_stop_queue(dev);
@@ -529,7 +517,7 @@
 		self->tx_buff.len = skb->len;
 		
 		mtt = irda_get_mtt(skb);
-			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
+		pr_debug("%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
 			if (mtt)
 				udelay(mtt);
 
@@ -563,11 +551,7 @@
 static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
 {
 	__u8 set;
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
-	unsigned long flags;
-	__u8 hcr;
-#endif
-        IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
+	pr_debug("%s(), len=%d\n", __func__ , self->tx_buff.len);
 
 	/* Save current set */
 	set = inb(iobase+SSR);
@@ -579,30 +563,13 @@
 	/* Choose transmit DMA channel  */ 
 	switch_bank(iobase, SET2);
 	outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
-	spin_lock_irqsave(&self->lock, flags);
-
-	disable_dma(self->io.dma);
-	clear_dma_ff(self->io.dma);
-	set_dma_mode(self->io.dma, DMA_MODE_READ);
-	set_dma_addr(self->io.dma, self->tx_buff_dma);
-	set_dma_count(self->io.dma, self->tx_buff.len);
-#else
 	irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
 		       DMA_MODE_WRITE);	
-#endif
 	self->io.direction = IO_XMIT;
 	
 	/* Enable DMA */
  	switch_bank(iobase, SET0);
-#ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
-	hcr = inb(iobase+HCR);
-	outb(hcr | HCR_EN_DMA, iobase+HCR);
-	enable_dma(self->io.dma);
-	spin_unlock_irqrestore(&self->lock, flags);
-#else	
 	outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
-#endif
 
 	/* Restore set register */
 	outb(set, iobase+SSR);
@@ -619,19 +586,16 @@
 	int actual = 0;
 	__u8 set;
 	
-	IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	/* Save current bank */
 	set = inb(iobase+SSR);
 
 	switch_bank(iobase, SET0);
 	if (!(inb_p(iobase+USR) & USR_TSRE)) {
-		IRDA_DEBUG(4,
-			   "%s(), warning, FIFO not empty yet!\n", __func__  );
+		pr_debug("%s(), warning, FIFO not empty yet!\n", __func__);
 
 		fifo_size -= 17;
-		IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
-			   __func__ , fifo_size);
+		pr_debug("%s(), %d bytes left in tx fifo\n",
+			 __func__ , fifo_size);
 	}
 
 	/* Fill FIFO with current frame */
@@ -640,8 +604,8 @@
 		outb(buf[actual++], iobase+TBR);
 	}
         
-	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __func__ , fifo_size, actual, len);
+	pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+		 __func__ , fifo_size, actual, len);
 
 	/* Restore bank */
 	outb(set, iobase+SSR);
@@ -661,7 +625,7 @@
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
+	pr_debug("%s(%ld)\n", __func__ , jiffies);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -676,7 +640,7 @@
 	
 	/* Check for underrun! */
 	if (inb(iobase+AUDR) & AUDR_UNDR) {
-		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
+		pr_debug("%s(), Transmit underrun!\n", __func__);
 		
 		self->netdev->stats.tx_errors++;
 		self->netdev->stats.tx_fifo_errors++;
@@ -711,13 +675,13 @@
 {
 	int iobase;
 	__u8 set;
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
 	unsigned long flags;
 	__u8 hcr;
 #endif
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(4, "%s\n", __func__ );
+	pr_debug("%s\n", __func__);
 
 	iobase= self->io.fir_base;
 
@@ -736,7 +700,7 @@
 	self->io.direction = IO_RECV;
 	self->rx_buff.data = self->rx_buff.head;
 
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
 	spin_lock_irqsave(&self->lock, flags);
 
 	disable_dma(self->io.dma);
@@ -759,7 +723,7 @@
 	
 	/* Enable DMA */
 	switch_bank(iobase, SET0);
-#ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
+#ifdef CONFIG_ARCH_NETWINDER
 	hcr = inb(iobase+HCR);
 	outb(hcr | HCR_EN_DMA, iobase+HCR);
 	enable_dma(self->io.dma);
@@ -788,7 +752,7 @@
 	__u8 set;
 	__u8 status;
 
-	IRDA_DEBUG(4, "%s\n", __func__ );
+	pr_debug("%s\n", __func__);
 
 	st_fifo = &self->st_fifo;
 
@@ -905,8 +869,6 @@
 	__u8 byte = 0x00;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	IRDA_ASSERT(self != NULL, return;);
 	
 	iobase = self->io.fir_base;
@@ -932,7 +894,7 @@
 	__u8 set;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
+	pr_debug("%s(), isr=%#x\n", __func__ , isr);
 	
 	iobase = self->io.fir_base;
 	/* Transmit FIFO low on data */
@@ -968,8 +930,7 @@
 	if (isr & ISR_TXEMP_I) {		
 		/* Check if we need to change the speed? */
 		if (self->new_speed) {
-			IRDA_DEBUG(2,
-				   "%s(), Changing speed!\n", __func__ );
+			pr_debug("%s(), Changing speed!\n", __func__);
 			w83977af_change_speed(self, self->new_speed);
 			self->new_speed = 0;
 		}
@@ -1151,7 +1112,6 @@
 	char hwname[32];
 	__u8 set;
 	
-	IRDA_DEBUG(0, "%s()\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -1214,8 +1174,6 @@
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
 	self = netdev_priv(dev);
@@ -1269,7 +1227,7 @@
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	spin_lock_irqsave(&self->lock, flags);