--- zzzz-none-000/linux-3.10.107/drivers/net/phy/vitesse.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/phy/vitesse.c 2021-02-04 17:41:59.000000000 +0000 @@ -3,7 +3,7 @@ * * Author: Kriston Carson * - * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc. + * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,6 +18,11 @@ #include #include +/* Vitesse Extended Page Magic Register(s) */ +#define MII_VSC82X4_EXT_PAGE_16E 0x10 +#define MII_VSC82X4_EXT_PAGE_17E 0x11 +#define MII_VSC82X4_EXT_PAGE_18E 0x12 + /* Vitesse Extended Control Register 1 */ #define MII_VSC8244_EXT_CON1 0x17 #define MII_VSC8244_EXTCON1_INIT 0x0000 @@ -44,18 +49,27 @@ #define MII_VSC8244_ISTAT_DUPLEX 0x1000 /* Vitesse Auxiliary Control/Status Register */ -#define MII_VSC8244_AUX_CONSTAT 0x1c -#define MII_VSC8244_AUXCONSTAT_INIT 0x0000 -#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020 -#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018 -#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 -#define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8244_AUX_CONSTAT 0x1c +#define MII_VSC8244_AUXCONSTAT_INIT 0x0000 +#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020 +#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018 +#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 +#define MII_VSC8244_AUXCONSTAT_100 0x0008 #define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ #define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 +/* Vitesse Extended Page Access Register */ +#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f + +#define PHY_ID_VSC8234 0x000fc620 #define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8514 0x00070670 +#define PHY_ID_VSC8574 0x000704a0 +#define PHY_ID_VSC8601 0x00070420 +#define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 +#define PHY_ID_VSC8211 0x000fc4b0 MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); @@ -100,9 +114,8 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) { int err = 0; - - /* - * Don't bother to ACK the interrupts if interrupts + + /* Don't bother to ACK the interrupts if interrupts * are disabled. The 824x cannot clear the interrupts * if they are disabled. */ @@ -118,12 +131,15 @@ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - phydev->drv->phy_id == PHY_ID_VSC8244 ? + (phydev->drv->phy_id == PHY_ID_VSC8234 || + phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8514 || + phydev->drv->phy_id == PHY_ID_VSC8574 || + phydev->drv->phy_id == PHY_ID_VSC8601) ? MII_VSC8244_IMASK_MASK : MII_VSC8221_IMASK_MASK); else { - /* - * The Vitesse PHY cannot clear the interrupt + /* The Vitesse PHY cannot clear the interrupt * once it has disabled them, so we clear them first */ err = phy_read(phydev, MII_VSC8244_ISTAT); @@ -146,24 +162,142 @@ return err; /* Perhaps we should set EXT_CON1 based on the interface? - Options are 802.3Z SerDes or SGMII */ + * Options are 802.3Z SerDes or SGMII + */ +} + +/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links + * @phydev: target phy_device struct + * + * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing + * special values in the VSC8234/VSC8244 extended reserved registers + */ +static int vsc82x4_config_autocross_enable(struct phy_device *phydev) +{ + int ret; + + if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100) + return 0; + + /* map extended registers set 0x10 - 0x1e */ + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa); + /* map standard registers set 0x10 - 0x1e */ + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + else + phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + + return ret; } -/* Vitesse 824x */ +/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR and also start the auto + * MDI/MDI-X feature + */ +static int vsc82x4_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by + * writing special values in the VSC8234 extended reserved registers + */ + if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) { + ret = genphy_setup_forced(phydev); + + if (ret < 0) /* error */ + return ret; + + return vsc82x4_config_autocross_enable(phydev); + } + + return genphy_config_aneg(phydev); +} + +/* Vitesse 82xx */ static struct phy_driver vsc82xx_driver[] = { { + .phy_id = PHY_ID_VSC8234, + .name = "Vitesse VSC8234", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = &vsc824x_config_init, - .config_aneg = &genphy_config_aneg, + .config_aneg = &vsc82x4_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }, { + .phy_id = PHY_ID_VSC8514, + .name = "Vitesse VSC8514", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8574, + .name = "Vitesse VSC8574", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8601, + .name = "Vitesse VSC8601", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &genphy_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8662, + .name = "Vitesse VSC8662", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { /* Vitesse 8221 */ .phy_id = PHY_ID_VSC8221, .phy_id_mask = 0x000ffff0, @@ -176,26 +310,31 @@ .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + /* Vitesse 8211 */ + .phy_id = PHY_ID_VSC8211, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8211", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, } }; -static int __init vsc82xx_init(void) -{ - return phy_drivers_register(vsc82xx_driver, - ARRAY_SIZE(vsc82xx_driver)); -} - -static void __exit vsc82xx_exit(void) -{ - return phy_drivers_unregister(vsc82xx_driver, - ARRAY_SIZE(vsc82xx_driver)); -} - -module_init(vsc82xx_init); -module_exit(vsc82xx_exit); +module_phy_driver(vsc82xx_driver); static struct mdio_device_id __maybe_unused vitesse_tbl[] = { + { PHY_ID_VSC8234, 0x000ffff0 }, { PHY_ID_VSC8244, 0x000fffc0 }, + { PHY_ID_VSC8514, 0x000ffff0 }, + { PHY_ID_VSC8574, 0x000ffff0 }, + { PHY_ID_VSC8662, 0x000ffff0 }, { PHY_ID_VSC8221, 0x000ffff0 }, + { PHY_ID_VSC8211, 0x000ffff0 }, { } };