--- zzzz-none-000/linux-3.10.107/drivers/net/sungem_phy.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/sungem_phy.c	2021-02-04 17:41:59.000000000 +0000
@@ -47,22 +47,22 @@
 	{ 1, 0, 1 },	/* 1000BT */
 };
 
-static inline int __phy_read(struct mii_phy* phy, int id, int reg)
+static inline int __sungem_phy_read(struct mii_phy* phy, int id, int reg)
 {
 	return phy->mdio_read(phy->dev, id, reg);
 }
 
-static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val)
+static inline void __sungem_phy_write(struct mii_phy* phy, int id, int reg, int val)
 {
 	phy->mdio_write(phy->dev, id, reg, val);
 }
 
-static inline int phy_read(struct mii_phy* phy, int reg)
+static inline int sungem_phy_read(struct mii_phy* phy, int reg)
 {
 	return phy->mdio_read(phy->dev, phy->mii_id, reg);
 }
 
-static inline void phy_write(struct mii_phy* phy, int reg, int val)
+static inline void sungem_phy_write(struct mii_phy* phy, int reg, int val)
 {
 	phy->mdio_write(phy->dev, phy->mii_id, reg, val);
 }
@@ -72,21 +72,21 @@
 	u16 val;
 	int limit = 10000;
 
-	val = __phy_read(phy, phy_id, MII_BMCR);
+	val = __sungem_phy_read(phy, phy_id, MII_BMCR);
 	val &= ~(BMCR_ISOLATE | BMCR_PDOWN);
 	val |= BMCR_RESET;
-	__phy_write(phy, phy_id, MII_BMCR, val);
+	__sungem_phy_write(phy, phy_id, MII_BMCR, val);
 
 	udelay(100);
 
 	while (--limit) {
-		val = __phy_read(phy, phy_id, MII_BMCR);
+		val = __sungem_phy_read(phy, phy_id, MII_BMCR);
 		if ((val & BMCR_RESET) == 0)
 			break;
 		udelay(10);
 	}
 	if ((val & BMCR_ISOLATE) && limit > 0)
-		__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+		__sungem_phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
 
 	return limit <= 0;
 }
@@ -95,19 +95,19 @@
 {
 	u16 data;
 
-	data = phy_read(phy, MII_BCM5201_MULTIPHY);
+	data = sungem_phy_read(phy, MII_BCM5201_MULTIPHY);
 	data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE;
-	phy_write(phy, MII_BCM5201_MULTIPHY, data);
+	sungem_phy_write(phy, MII_BCM5201_MULTIPHY, data);
 
-	phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+	sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
 
 	return 0;
 }
 
 static int bcm5201_suspend(struct mii_phy* phy)
 {
-	phy_write(phy, MII_BCM5201_INTERRUPT, 0);
-	phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
+	sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+	sungem_phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
 
 	return 0;
 }
@@ -116,20 +116,20 @@
 {
 	u16 data;
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
 		data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 		data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR);
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
 
 	return 0;
@@ -139,12 +139,12 @@
 {
 	u16 data;
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 		  data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE);
 
 	return 0;
@@ -154,20 +154,20 @@
 {
 	u16 data;
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
 		data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 		data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
 
 	return 0;
@@ -177,12 +177,12 @@
 {
 	u16 data;
 
-	data = phy_read(phy, MII_BCM5221_TEST);
-	phy_write(phy, MII_BCM5221_TEST,
+	data = sungem_phy_read(phy, MII_BCM5221_TEST);
+	sungem_phy_write(phy, MII_BCM5221_TEST,
 		data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 
-	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
-	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+	data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+	sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 		  data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
 
 	return 0;
@@ -193,26 +193,26 @@
 	u16 data;
 
 	/* Configure for gigabit full duplex */
-	data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+	data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
 	data |= MII_BCM5400_AUXCONTROL_PWR10BASET;
-	phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+	sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
 
-	data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+	data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 	data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
-	phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+	sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 
 	udelay(100);
 
 	/* Reset and configure cascaded 10/100 PHY */
 	(void)reset_one_mii_phy(phy, 0x1f);
 
-	data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+	data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
 	data |= MII_BCM5201_MULTIPHY_SERIALMODE;
-	__phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+	__sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
 
-	data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+	data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
 	data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET;
-	phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+	sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
 
 	return 0;
 }
@@ -220,7 +220,7 @@
 static int bcm5400_suspend(struct mii_phy* phy)
 {
 #if 0 /* Commented out in Darwin... someone has those dawn docs ? */
-	phy_write(phy, MII_BMCR, BMCR_PDOWN);
+	sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 #endif
 	return 0;
 }
@@ -230,7 +230,7 @@
 	u16 data;
 	int rev;
 
-	rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+	rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
 	if (rev == 0 || rev == 3) {
 		/* Some revisions of 5401 appear to need this
 		 * initialisation sequence to disable, according
@@ -243,32 +243,32 @@
 		 * Note: This should (and does) match tg3_init_5401phy_dsp
 		 *       in the tg3.c driver. -DaveM
 		 */
-		phy_write(phy, 0x18, 0x0c20);
-		phy_write(phy, 0x17, 0x0012);
-		phy_write(phy, 0x15, 0x1804);
-		phy_write(phy, 0x17, 0x0013);
-		phy_write(phy, 0x15, 0x1204);
-		phy_write(phy, 0x17, 0x8006);
-		phy_write(phy, 0x15, 0x0132);
-		phy_write(phy, 0x17, 0x8006);
-		phy_write(phy, 0x15, 0x0232);
-		phy_write(phy, 0x17, 0x201f);
-		phy_write(phy, 0x15, 0x0a20);
+		sungem_phy_write(phy, 0x18, 0x0c20);
+		sungem_phy_write(phy, 0x17, 0x0012);
+		sungem_phy_write(phy, 0x15, 0x1804);
+		sungem_phy_write(phy, 0x17, 0x0013);
+		sungem_phy_write(phy, 0x15, 0x1204);
+		sungem_phy_write(phy, 0x17, 0x8006);
+		sungem_phy_write(phy, 0x15, 0x0132);
+		sungem_phy_write(phy, 0x17, 0x8006);
+		sungem_phy_write(phy, 0x15, 0x0232);
+		sungem_phy_write(phy, 0x17, 0x201f);
+		sungem_phy_write(phy, 0x15, 0x0a20);
 	}
 
 	/* Configure for gigabit full duplex */
-	data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+	data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 	data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
-	phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+	sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 
 	udelay(10);
 
 	/* Reset and configure cascaded 10/100 PHY */
 	(void)reset_one_mii_phy(phy, 0x1f);
 
-	data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+	data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
 	data |= MII_BCM5201_MULTIPHY_SERIALMODE;
-	__phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+	__sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
 
 	return 0;
 }
@@ -276,7 +276,7 @@
 static int bcm5401_suspend(struct mii_phy* phy)
 {
 #if 0 /* Commented out in Darwin... someone has those dawn docs ? */
-	phy_write(phy, MII_BMCR, BMCR_PDOWN);
+	sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 #endif
 	return 0;
 }
@@ -288,19 +288,19 @@
 	/* Here's some more Apple black magic to setup
 	 * some voltage stuffs.
 	 */
-	phy_write(phy, 0x1c, 0x8c23);
-	phy_write(phy, 0x1c, 0x8ca3);
-	phy_write(phy, 0x1c, 0x8c23);
+	sungem_phy_write(phy, 0x1c, 0x8c23);
+	sungem_phy_write(phy, 0x1c, 0x8ca3);
+	sungem_phy_write(phy, 0x1c, 0x8c23);
 
 	/* Here, Apple seems to want to reset it, do
 	 * it as well
 	 */
-	phy_write(phy, MII_BMCR, BMCR_RESET);
-	phy_write(phy, MII_BMCR, 0x1340);
+	sungem_phy_write(phy, MII_BMCR, BMCR_RESET);
+	sungem_phy_write(phy, MII_BMCR, 0x1340);
 
-	data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+	data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 	data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
-	phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+	sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 
 	udelay(10);
 
@@ -321,7 +321,7 @@
 	phy->advertising = advertise;
 
 	/* Setup standard advertise */
-	adv = phy_read(phy, MII_ADVERTISE);
+	adv = sungem_phy_read(phy, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -331,12 +331,12 @@
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
-	phy_write(phy, MII_ADVERTISE, adv);
+	sungem_phy_write(phy, MII_ADVERTISE, adv);
 
 	/* Start/Restart aneg */
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -350,11 +350,11 @@
 	phy->duplex = fd;
 	phy->pause = 0;
 
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
 
 	/* First reset the PHY */
-	phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+	sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 
 	/* Select speed & duplex */
 	switch(speed) {
@@ -369,7 +369,7 @@
 	}
 	if (fd == DUPLEX_FULL)
 		ctl |= BMCR_FULLDPLX;
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -378,8 +378,8 @@
 {
 	u16 status;
 
-	(void)phy_read(phy, MII_BMSR);
-	status = phy_read(phy, MII_BMSR);
+	(void)sungem_phy_read(phy, MII_BMSR);
+	status = sungem_phy_read(phy, MII_BMSR);
 	if ((status & BMSR_LSTATUS) == 0)
 		return 0;
 	if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
@@ -392,7 +392,7 @@
 	u16 lpa;
 
 	if (phy->autoneg) {
-		lpa = phy_read(phy, MII_LPA);
+		lpa = sungem_phy_read(phy, MII_LPA);
 
 		if (lpa & (LPA_10FULL | LPA_100FULL))
 			phy->duplex = DUPLEX_FULL;
@@ -413,7 +413,7 @@
 
 static int generic_suspend(struct mii_phy* phy)
 {
-	phy_write(phy, MII_BMCR, BMCR_PDOWN);
+	sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 
 	return 0;
 }
@@ -423,27 +423,27 @@
 	u16 data;
 	unsigned int id;
 
-	id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+	id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
 
 	/* Revision 0 of 5421 needs some fixups */
 	if (id == 0x002060e0) {
 		/* This is borrowed from MacOS
 		 */
-		phy_write(phy, 0x18, 0x1007);
-		data = phy_read(phy, 0x18);
-		phy_write(phy, 0x18, data | 0x0400);
-		phy_write(phy, 0x18, 0x0007);
-		data = phy_read(phy, 0x18);
-		phy_write(phy, 0x18, data | 0x0800);
-		phy_write(phy, 0x17, 0x000a);
-		data = phy_read(phy, 0x15);
-		phy_write(phy, 0x15, data | 0x0200);
+		sungem_phy_write(phy, 0x18, 0x1007);
+		data = sungem_phy_read(phy, 0x18);
+		sungem_phy_write(phy, 0x18, data | 0x0400);
+		sungem_phy_write(phy, 0x18, 0x0007);
+		data = sungem_phy_read(phy, 0x18);
+		sungem_phy_write(phy, 0x18, data | 0x0800);
+		sungem_phy_write(phy, 0x17, 0x000a);
+		data = sungem_phy_read(phy, 0x15);
+		sungem_phy_write(phy, 0x15, data | 0x0200);
 	}
 
 	/* Pick up some init code from OF for K2 version */
 	if ((id & 0xfffffff0) == 0x002062e0) {
-		phy_write(phy, 4, 0x01e1);
-		phy_write(phy, 9, 0x0300);
+		sungem_phy_write(phy, 4, 0x01e1);
+		sungem_phy_write(phy, 9, 0x0300);
 	}
 
 	/* Check if we can enable automatic low power */
@@ -455,9 +455,9 @@
 			can_low_power = 0;
 		if (can_low_power) {
 			/* Enable automatic low-power */
-			phy_write(phy, 0x1c, 0x9002);
-			phy_write(phy, 0x1c, 0xa821);
-			phy_write(phy, 0x1c, 0x941d);
+			sungem_phy_write(phy, 0x1c, 0x9002);
+			sungem_phy_write(phy, 0x1c, 0xa821);
+			sungem_phy_write(phy, 0x1c, 0x941d);
 		}
 	}
 #endif /* CONFIG_PPC_PMAC */
@@ -476,7 +476,7 @@
 	phy->advertising = advertise;
 
 	/* Setup standard advertise */
-	adv = phy_read(phy, MII_ADVERTISE);
+	adv = sungem_phy_read(phy, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -490,21 +490,21 @@
 		adv |= ADVERTISE_PAUSE_CAP;
 	if (advertise & ADVERTISED_Asym_Pause)
 		adv |= ADVERTISE_PAUSE_ASYM;
-	phy_write(phy, MII_ADVERTISE, adv);
+	sungem_phy_write(phy, MII_ADVERTISE, adv);
 
 	/* Setup 1000BT advertise */
-	adv = phy_read(phy, MII_1000BASETCONTROL);
+	adv = sungem_phy_read(phy, MII_1000BASETCONTROL);
 	adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP);
 	if (advertise & SUPPORTED_1000baseT_Half)
 		adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
 	if (advertise & SUPPORTED_1000baseT_Full)
 		adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
-	phy_write(phy, MII_1000BASETCONTROL, adv);
+	sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
 
 	/* Start/Restart aneg */
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -518,11 +518,11 @@
 	phy->duplex = fd;
 	phy->pause = 0;
 
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
 
 	/* First reset the PHY */
-	phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+	sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 
 	/* Select speed & duplex */
 	switch(speed) {
@@ -539,7 +539,7 @@
 
 	// XXX Should we set the sungem to GII now on 1000BT ?
 
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -550,7 +550,7 @@
 	u16 val;
 
 	if (phy->autoneg) {
-	    	val = phy_read(phy, MII_BCM5400_AUXSTATUS);
+	    	val = sungem_phy_read(phy, MII_BCM5400_AUXSTATUS);
 		link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
 			     MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
 		phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
@@ -559,7 +559,7 @@
 				SPEED_1000 :
 				(phy_BCM5400_link_table[link_mode][1] ?
 				 SPEED_100 : SPEED_10);
-		val = phy_read(phy, MII_LPA);
+		val = sungem_phy_read(phy, MII_LPA);
 		phy->pause = (phy->duplex == DUPLEX_FULL) &&
 			((val & LPA_PAUSE) != 0);
 	}
@@ -575,19 +575,19 @@
 	u16 rev;
 
 	/* magic init sequence for rev 0 */
-	rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+	rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
 	if (rev == 0) {
-		phy_write(phy, 0x1d, 0x000a);
-		phy_write(phy, 0x1e, 0x0821);
+		sungem_phy_write(phy, 0x1d, 0x000a);
+		sungem_phy_write(phy, 0x1e, 0x0821);
 
-		phy_write(phy, 0x1d, 0x0006);
-		phy_write(phy, 0x1e, 0x8600);
+		sungem_phy_write(phy, 0x1d, 0x0006);
+		sungem_phy_write(phy, 0x1e, 0x8600);
 
-		phy_write(phy, 0x1d, 0x000b);
-		phy_write(phy, 0x1e, 0x0100);
+		sungem_phy_write(phy, 0x1d, 0x000b);
+		sungem_phy_write(phy, 0x1e, 0x0100);
 
-		phy_write(phy, 0x1d, 0x0004);
-		phy_write(phy, 0x1e, 0x4850);
+		sungem_phy_write(phy, 0x1d, 0x0004);
+		sungem_phy_write(phy, 0x1e, 0x4850);
 	}
 	return 0;
 }
@@ -600,8 +600,8 @@
 	int mode;
 
 	/* find out in what mode we are */
-	phy_write(phy, MII_NCONFIG, 0x1000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x1000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	mode = (phy_reg & BCM5421_MODE_MASK) >> 5;
 
@@ -609,8 +609,8 @@
 		return genmii_poll_link(phy);
 
 	/* try to find out whether we have a link */
-	phy_write(phy, MII_NCONFIG, 0x2000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x2000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	if (phy_reg & 0x0020)
 		return 0;
@@ -624,8 +624,8 @@
 	int mode;
 
 	/* find out in what mode we are */
-	phy_write(phy, MII_NCONFIG, 0x1000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x1000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	mode = (phy_reg & BCM5421_MODE_MASK ) >> 5;
 
@@ -635,8 +635,8 @@
 	phy->speed = SPEED_1000;
 
 	/* find out whether we are running half- or full duplex */
-	phy_write(phy, MII_NCONFIG, 0x2000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x2000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	if ( (phy_reg & 0x0080) >> 7)
 		phy->duplex |=  DUPLEX_HALF;
@@ -649,14 +649,14 @@
 static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg)
 {
 	/* enable fiber mode */
-	phy_write(phy, MII_NCONFIG, 0x9020);
+	sungem_phy_write(phy, MII_NCONFIG, 0x9020);
 	/* LEDs active in both modes, autosense prio = fiber */
-	phy_write(phy, MII_NCONFIG, 0x945f);
+	sungem_phy_write(phy, MII_NCONFIG, 0x945f);
 
 	if (!autoneg) {
 		/* switch off fibre autoneg */
-		phy_write(phy, MII_NCONFIG, 0xfc01);
-		phy_write(phy, 0x0b, 0x0004);
+		sungem_phy_write(phy, MII_NCONFIG, 0xfc01);
+		sungem_phy_write(phy, 0x0b, 0x0004);
 	}
 
 	phy->autoneg = autoneg;
@@ -673,8 +673,8 @@
 	int mode;
 
 	/* find out in what mode we are */
-	phy_write(phy, MII_NCONFIG, 0x7c00);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
 
@@ -682,8 +682,8 @@
 		return genmii_poll_link(phy);
 
 	/* find out whether we have a link */
-	phy_write(phy, MII_NCONFIG, 0x7000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x7000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	if (phy_reg & BCM5461_FIBER_LINK)
 		return 1;
@@ -699,8 +699,8 @@
 	int mode;
 
 	/* find out in what mode we are */
-	phy_write(phy, MII_NCONFIG, 0x7c00);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
 
@@ -711,8 +711,8 @@
 	phy->speed = SPEED_1000;
 
 	/* find out whether we are running half- or full duplex */
-	phy_write(phy, MII_NCONFIG, 0x7000);
-	phy_reg = phy_read(phy, MII_NCONFIG);
+	sungem_phy_write(phy, MII_NCONFIG, 0x7000);
+	phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 
 	if (phy_reg & BCM5461_FIBER_DUPLEX)
 		phy->duplex |=  DUPLEX_FULL;
@@ -725,15 +725,15 @@
 static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg)
 {
 	/* select fiber mode, enable 1000 base-X registers */
-	phy_write(phy, MII_NCONFIG, 0xfc0b);
+	sungem_phy_write(phy, MII_NCONFIG, 0xfc0b);
 
 	if (autoneg) {
 		/* enable fiber with no autonegotiation */
-		phy_write(phy, MII_ADVERTISE, 0x01e0);
-		phy_write(phy, MII_BMCR, 0x1140);
+		sungem_phy_write(phy, MII_ADVERTISE, 0x01e0);
+		sungem_phy_write(phy, MII_BMCR, 0x1140);
 	} else {
 		/* enable fiber with autonegotiation */
-		phy_write(phy, MII_BMCR, 0x0140);
+		sungem_phy_write(phy, MII_BMCR, 0x0140);
 	}
 
 	phy->autoneg = autoneg;
@@ -752,7 +752,7 @@
 	phy->advertising = advertise;
 
 	/* Setup standard advertise */
-	adv = phy_read(phy, MII_ADVERTISE);
+	adv = sungem_phy_read(phy, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -766,7 +766,7 @@
 		adv |= ADVERTISE_PAUSE_CAP;
 	if (advertise & ADVERTISED_Asym_Pause)
 		adv |= ADVERTISE_PAUSE_ASYM;
-	phy_write(phy, MII_ADVERTISE, adv);
+	sungem_phy_write(phy, MII_ADVERTISE, adv);
 
 	/* Setup 1000BT advertise & enable crossover detect
 	 * XXX How do we advertise 1000BT ? Darwin source is
@@ -774,7 +774,7 @@
 	 * write to control... Someone has specs for those
 	 * beasts ?
 	 */
-	adv = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+	adv = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
 	adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX;
 	adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
 			MII_1000BASETCONTROL_HALFDUPLEXCAP);
@@ -782,12 +782,12 @@
 		adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
 	if (advertise & SUPPORTED_1000baseT_Full)
 		adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
-	phy_write(phy, MII_1000BASETCONTROL, adv);
+	sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
 
 	/* Start/Restart aneg */
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -801,7 +801,7 @@
 	phy->duplex = fd;
 	phy->pause = 0;
 
-	ctl = phy_read(phy, MII_BMCR);
+	ctl = sungem_phy_read(phy, MII_BMCR);
 	ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
 	ctl |= BMCR_RESET;
 
@@ -824,7 +824,7 @@
 	/* Disable crossover. Again, the way Apple does it is strange,
 	 * though I don't assume they are wrong ;)
 	 */
-	ctl2 = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+	ctl2 = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
 	ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX |
 		MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX |
 		MII_1000BASETCONTROL_FULLDUPLEXCAP |
@@ -833,11 +833,11 @@
 		ctl2 |= (fd == DUPLEX_FULL) ?
 			MII_1000BASETCONTROL_FULLDUPLEXCAP :
 			MII_1000BASETCONTROL_HALFDUPLEXCAP;
-	phy_write(phy, MII_1000BASETCONTROL, ctl2);
+	sungem_phy_write(phy, MII_1000BASETCONTROL, ctl2);
 
 	// XXX Should we set the sungem to GII now on 1000BT ?
 
-	phy_write(phy, MII_BMCR, ctl);
+	sungem_phy_write(phy, MII_BMCR, ctl);
 
 	return 0;
 }
@@ -847,7 +847,7 @@
 	u16 status, pmask;
 
 	if (phy->autoneg) {
-		status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
+		status = sungem_phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
 		if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
 			return -EAGAIN;
 		if (status & MII_M1011_PHY_SPEC_STATUS_1000)
@@ -1174,7 +1174,7 @@
 		goto fail;
 
 	/* Read ID and find matching entry */
-	id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+	id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
 	printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n",
 	       id, mii_id);
 	for (i=0; (def = mii_phy_table[i]) != NULL; i++)