--- zzzz-none-000/linux-3.10.107/drivers/net/wireless/ath/ath9k/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/wireless/ath/ath9k/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -3,6 +3,8 @@
 config ATH9K_COMMON
 	tristate
 	select ATH_COMMON
+	select DEBUG_FS
+	select RELAY
 config ATH9K_DFS_DEBUGFS
 	def_bool y
 	depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
@@ -28,7 +30,7 @@
 	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
 	  of chipsets. For a specific list of supported external
 	  cards, laptops that already ship with these cards and
-	  APs that come with these cards refer to to ath9k wiki
+	  APs that come with these cards refer to ath9k wiki
 	  products page:
 
 	  http://wireless.kernel.org/en/users/Drivers/ath9k/products
@@ -56,7 +58,7 @@
 
 config ATH9K_DEBUGFS
 	bool "Atheros ath9k debugging"
-	depends on ATH9K
+	depends on ATH9K && DEBUG_FS
 	select MAC80211_DEBUGFS
 	select RELAY
 	---help---
@@ -65,6 +67,14 @@
 
 	  Also required for changing debug message flags at run time.
 
+config ATH9K_STATION_STATISTICS
+	bool "Detailed station statistics"
+	depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
+	select MAC80211_DEBUGFS
+	default n
+	---help---
+	  This option enables detailed statistics for association stations.
+
 config ATH9K_DFS_CERTIFIED
 	bool "Atheros DFS support for certified platforms"
 	depends on ATH9K && CFG80211_CERTIFICATION_ONUS
@@ -84,25 +94,66 @@
 	  developed. At this point enabling this option won't do anything
 	  except increase code size.
 
-config ATH9K_MAC_DEBUG
-	bool "Atheros MAC statistics"
-	depends on ATH9K_DEBUGFS
-	default y
-	---help---
-	  This option enables collection of statistics for Rx/Tx status
-	  data and some other MAC related statistics
-
-config ATH9K_LEGACY_RATE_CONTROL
-	bool "Atheros ath9k rate control"
+config ATH9K_DYNACK
+	bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)"
 	depends on ATH9K
 	default n
 	---help---
-	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht. Be warned that there are various
-	  issues with the ath9k RC and minstrel is a more robust algorithm.
-	  Note that even if this option is selected, "ath9k_rate_control"
-	  has to be passed to mac80211 using the module parameter,
-	  ieee80211_default_rc_algo.
+	  This option enables ath9k dynamic ACK timeout estimation algorithm
+	  based on ACK frame RX timestamp, TX frame timestamp and frame
+	  duration
+
+config ATH9K_TX99
+	bool "Atheros ath9k TX99 testing support"
+	depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
+	default n
+	---help---
+	  Say N. This should only be enabled on systems undergoing
+	  certification testing and evaluation in a controlled environment.
+	  Enabling this will only enable TX99 support, all other modes of
+	  operation will be disabled.
+
+	  TX99 support enables Specific Absorption Rate (SAR) testing.
+	  SAR is the unit of measurement for the amount of radio frequency(RF)
+	  absorbed by the body when using a wireless device. The RF exposure
+	  limits used are expressed in the terms of SAR, which is a measure
+	  of the electric and magnetic field strength and power density for
+	  transmitters operating at frequencies from 300 kHz to 100 GHz.
+	  Regulatory bodies around the world require that wireless device
+	  be evaluated to meet the RF exposure limits set forth in the
+	  governmental SAR regulations.
+
+config ATH9K_WOW
+	bool "Wake on Wireless LAN support (EXPERIMENTAL)"
+	depends on ATH9K && PM
+	default n
+	---help---
+	  This option enables Wake on Wireless LAN support for certain cards.
+	  Currently, AR9462 is supported.
+
+config ATH9K_RFKILL
+	bool "Atheros ath9k rfkill support" if EXPERT
+	depends on ATH9K
+	depends on RFKILL=y || RFKILL=ATH9K
+	default y
+	help
+	  Say Y to have ath9k poll the RF-Kill GPIO every couple of
+	  seconds. Turn off to save power, but enable it if you have
+	  a platform that can toggle the RF-Kill GPIO.
+
+config ATH9K_CHANNEL_CONTEXT
+       bool "Channel Context support"
+       depends on ATH9K
+       default n
+       ---help---
+         This option enables channel context support in ath9k, which is needed
+	 for multi-channel concurrency. Enable this if P2P PowerSave support
+	 is required.
+
+config ATH9K_PCOEM
+	bool "Atheros ath9k support for PC OEM cards" if EXPERT
+	depends on ATH9K
+	default y
 
 config ATH9K_HTC
        tristate "Atheros HTC based wireless cards support"