--- zzzz-none-000/linux-3.10.107/drivers/net/wireless/ath/ath9k/ar9002_hw.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/wireless/ath/ath9k/ar9002_hw.c	2021-02-04 17:41:59.000000000 +0000
@@ -32,16 +32,8 @@
 		return 0;
 	}
 
-	if (ah->config.pcie_clock_req)
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			   ar9280PciePhy_clkreq_off_L1_9280);
-	else
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			   ar9280PciePhy_clkreq_always_on_L1_9280);
-#ifdef CONFIG_PM_SLEEP
-		INIT_INI_ARRAY(&ah->iniPcieSerdesWow,
-			       ar9280PciePhy_awow);
-#endif
+	INIT_INI_ARRAY(&ah->iniPcieSerdes,
+		       ar9280PciePhy_clkreq_always_on_L1_9280);
 
 	if (AR_SREV_9287_11_OR_LATER(ah)) {
 		INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
@@ -273,13 +265,12 @@
 			if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
 				val |= AR_WA_D3_L1_DISABLE;
 		} else {
-			if (((AR_SREV_9285(ah) ||
-			      AR_SREV_9271(ah) ||
-			      AR_SREV_9287(ah)) &&
-			     (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
-			    (AR_SREV_9280(ah) &&
-			     (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
-				val |= AR_WA_D3_L1_DISABLE;
+			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
+				if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
+					val |= AR_WA_D3_L1_DISABLE;
+			} else if (AR_SREV_9280(ah)) {
+				if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
+					val |= AR_WA_D3_L1_DISABLE;
 			}
 		}
 
@@ -301,24 +292,18 @@
 	} else {
 		if (ah->config.pcie_waen) {
 			val = ah->config.pcie_waen;
-			if (!power_off)
-				val &= (~AR_WA_D3_L1_DISABLE);
+			val &= (~AR_WA_D3_L1_DISABLE);
 		} else {
-			if (AR_SREV_9285(ah) ||
-			    AR_SREV_9271(ah) ||
-			    AR_SREV_9287(ah)) {
+			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
 				val = AR9285_WA_DEFAULT;
-				if (!power_off)
-					val &= (~AR_WA_D3_L1_DISABLE);
-			}
-			else if (AR_SREV_9280(ah)) {
+				val &= (~AR_WA_D3_L1_DISABLE);
+			} else if (AR_SREV_9280(ah)) {
 				/*
 				 * For AR9280 chips, bit 22 of 0x4004
 				 * needs to be set.
 				 */
 				val = AR9280_WA_DEFAULT;
-				if (!power_off)
-					val &= (~AR_WA_D3_L1_DISABLE);
+				val &= (~AR_WA_D3_L1_DISABLE);
 			} else {
 				val = AR_WA_DEFAULT;
 			}
@@ -398,6 +383,20 @@
 	}
 }
 
+static void ar9002_hw_init_hang_checks(struct ath_hw *ah)
+{
+	if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
+		ah->config.hw_hang_checks |= HW_BB_RIFS_HANG;
+		ah->config.hw_hang_checks |= HW_BB_DFS_HANG;
+	}
+
+	if (AR_SREV_9280(ah))
+		ah->config.hw_hang_checks |= HW_BB_RX_CLEAR_STUCK_HANG;
+
+	if (AR_SREV_5416(ah) || AR_SREV_9100(ah) || AR_SREV_9160(ah))
+		ah->config.hw_hang_checks |= HW_MAC_HANG;
+}
+
 /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
 int ar9002_hw_attach_ops(struct ath_hw *ah)
 {
@@ -410,6 +409,7 @@
 		return ret;
 
 	priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
+	priv_ops->init_hang_checks = ar9002_hw_init_hang_checks;
 
 	ops->config_pci_powersave = ar9002_hw_configpcipowersave;
 
@@ -430,28 +430,10 @@
 	u32 modesIndex;
 	int i;
 
-	switch (chan->chanmode) {
-	case CHANNEL_A:
-	case CHANNEL_A_HT20:
-		modesIndex = 1;
-		break;
-	case CHANNEL_A_HT40PLUS:
-	case CHANNEL_A_HT40MINUS:
-		modesIndex = 2;
-		break;
-	case CHANNEL_G:
-	case CHANNEL_G_HT20:
-	case CHANNEL_B:
-		modesIndex = 4;
-		break;
-	case CHANNEL_G_HT40PLUS:
-	case CHANNEL_G_HT40MINUS:
-		modesIndex = 3;
-		break;
-
-	default:
-		return;
-	}
+	if (IS_CHAN_5GHZ(chan))
+		modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+	else
+		modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
 
 	ENABLE_REGWRITE_BUFFER(ah);