--- zzzz-none-000/linux-3.10.107/drivers/net/wireless/b43/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/net/wireless/b43/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,8 @@
 config B43
 	tristate "Broadcom 43xx wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
-	select SSB
+	depends on (BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA
+	select BCMA if B43_BCMA
+	select SSB if B43_SSB
 	select FW_LOADER
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
@@ -27,20 +28,33 @@
 	  If unsure, say M.
 
 config B43_BCMA
-	bool "Support for BCMA bus"
-	depends on B43 && (BCMA = y || BCMA = B43)
-	default y
-
-config B43_BCMA_EXTRA
-	bool "Hardware support that overlaps with the brcmsmac driver"
-	depends on B43_BCMA
-	default n if BRCMSMAC
-	default y
+	bool
 
 config B43_SSB
 	bool
-	depends on B43 && (SSB = y || SSB = B43)
-	default y
+
+choice
+	prompt "Supported bus types"
+	depends on B43
+	default B43_BUSES_BCMA_AND_SSB
+
+config B43_BUSES_BCMA_AND_SSB
+	bool "BCMA and SSB"
+	depends on BCMA_POSSIBLE && SSB_POSSIBLE
+	select B43_BCMA
+	select B43_SSB
+
+config B43_BUSES_BCMA
+	bool "BCMA only"
+	depends on BCMA_POSSIBLE
+	select B43_BCMA
+
+config B43_BUSES_SSB
+	bool "SSB only"
+	depends on SSB_POSSIBLE
+	select B43_SSB
+
+endchoice
 
 # Auto-select SSB PCI-HOST support, if possible
 config B43_PCI_AUTOSELECT
@@ -57,29 +71,9 @@
 	select SSB_DRIVER_PCICORE
 	default y
 
-config B43_PCMCIA
-	bool "Broadcom 43xx PCMCIA device support"
-	depends on B43 && SSB_PCMCIAHOST_POSSIBLE
-	select SSB_PCMCIAHOST
-	---help---
-	  Broadcom 43xx PCMCIA device support.
-
-	  Support for 16bit PCMCIA devices.
-	  Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
-	  devices, but 32bit CardBUS devices. CardBUS devices are supported
-	  out of the box by b43.
-
-	  With this config option you can drive b43 cards in
-	  CompactFlash formfactor in a PCMCIA adaptor.
-	  CF b43 cards can sometimes be found in handheld PCs.
-
-	  It's safe to select Y here, even if you don't have a B43 PCMCIA device.
-
-	  If unsure, say N.
-
 config B43_SDIO
 	bool "Broadcom 43xx SDIO device support"
-	depends on B43 && SSB_SDIOHOST_POSSIBLE
+	depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
 	select SSB_SDIOHOST
 	---help---
 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
@@ -98,44 +92,51 @@
 # if we can do DMA.
 config B43_BCMA_PIO
 	bool
-	depends on B43_BCMA
+	depends on B43 && B43_BCMA
 	select BCMA_BLOCKIO
 	default y
 
 config B43_PIO
 	bool
-	depends on B43
+	depends on B43 && B43_SSB
 	select SSB_BLOCKIO
 	default y
 
+config B43_PHY_G
+	bool "Support for G-PHY (802.11g) devices"
+	depends on B43 && B43_SSB
+	default y
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4306, BCM4311, BCM4318
+	  SoC: BCM4712, BCM5352E
+
 config B43_PHY_N
-	bool "Support for 802.11n (N-PHY) devices"
+	bool "Support for N-PHY (the main 802.11n series) devices"
 	depends on B43
+	default y
 	---help---
-	  Support for the N-PHY.
-
-	  This enables support for devices with N-PHY.
-
-	  Say N if you expect high stability and performance. Saying Y will not
-	  affect other devices support and may provide support for basic needs.
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4321, BCM4322,
+	       BCM43222, BCM43224, BCM43225,
+	       BCM43131, BCM43217, BCM43227, BCM43228
+	  SoC: BCM4716, BCM4717, BCM4718, BCM5356, BCM5357, BCM5358
 
 config B43_PHY_LP
-	bool "Support for low-power (LP-PHY) devices"
-	depends on B43
+	bool "Support for LP-PHY (low-power 802.11g) devices"
+	depends on B43 && B43_SSB
 	default y
 	---help---
-	  Support for the LP-PHY.
 	  The LP-PHY is a low-power PHY built into some notebooks
 	  and embedded devices. It supports 802.11a/b/g
 	  (802.11a support is optional, and currently disabled).
 
 config B43_PHY_HT
-	bool "Support for HT-PHY (high throughput) devices"
+	bool "Support for HT-PHY (high throughput 802.11n) devices"
 	depends on B43 && B43_BCMA
+	default y
 	---help---
-	  Support for the HT-PHY.
-
-	  Enables support for BCM4331 and possibly other chipsets with that PHY.
+	  This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset.
 
 config B43_PHY_LCN
 	bool "Support for LCN-PHY devices (BROKEN)"
@@ -145,6 +146,15 @@
 
 	  Say N, this is BROKEN and crashes driver.
 
+config B43_PHY_AC
+	bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
+	depends on B43 && B43_BCMA && BROKEN
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4352, BCM4360
+
+	  Say N, this is BROKEN and crashes driver.
+
 # This config option automatically enables b43 LEDS support,
 # if it's possible.
 config B43_LEDS