--- zzzz-none-000/linux-3.10.107/drivers/net/wireless/rt2x00/rt2800pci.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/net/wireless/rt2x00/rt2800pci.c 2021-02-04 17:41:59.000000000 +0000 @@ -20,9 +20,7 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + along with this program; if not, see . */ /* @@ -37,14 +35,13 @@ #include #include #include -#include #include #include "rt2x00.h" #include "rt2x00mmio.h" #include "rt2x00pci.h" -#include "rt2x00soc.h" #include "rt2800lib.h" +#include "rt2800mmio.h" #include "rt2800.h" #include "rt2800pci.h" @@ -90,27 +87,6 @@ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) -static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -{ - void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); - - if (!base_addr) - return -ENOMEM; - - memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); - - iounmap(base_addr); - return 0; -} -#else -static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -{ - return -ENOMEM; -} -#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ - -#ifdef CONFIG_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { struct rt2x00_dev *rt2x00dev = eeprom->data; @@ -183,112 +159,6 @@ { return rt2800_read_eeprom_efuse(rt2x00dev); } -#else -static inline int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) -{ - return -EOPNOTSUPP; -} - -static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_PCI */ - -/* - * Queue handlers. - */ -static void rt2800pci_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2x00mmio_register_read(rt2x00dev, INT_TIMER_EN, ®); - rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 1); - rt2x00mmio_register_write(rt2x00dev, INT_TIMER_EN, reg); - break; - default: - break; - } -} - -static void rt2800pci_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - struct queue_entry *entry; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - entry = rt2x00queue_get_entry(queue, Q_INDEX); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(queue->qid), - entry->entry_idx); - break; - case QID_MGMT: - entry = rt2x00queue_get_entry(queue, Q_INDEX); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(5), - entry->entry_idx); - break; - default: - break; - } -} - -static void rt2800pci_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2x00mmio_register_read(rt2x00dev, INT_TIMER_EN, ®); - rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 0); - rt2x00mmio_register_write(rt2x00dev, INT_TIMER_EN, reg); - - /* - * Wait for current invocation to finish. The tasklet - * won't be scheduled anymore afterwards since we disabled - * the TBTT and PRE TBTT timer. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - tasklet_kill(&rt2x00dev->pretbtt_tasklet); - - break; - default: - break; - } -} /* * Firmware functions @@ -332,213 +202,13 @@ } /* - * Initialization functions. - */ -static bool rt2800pci_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 1, &word); - - return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE)); - } else { - rt2x00_desc_read(entry_priv->desc, 1, &word); - - return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE)); - } -} - -static void rt2800pci_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 0, word); - - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); - rt2x00_desc_write(entry_priv->desc, 1, word); - - /* - * Set RX IDX in register to inform hardware that we have - * handled this entry and it is available for reuse again. - */ - rt2x00mmio_register_write(rt2x00dev, RX_CRX_IDX, - entry->entry_idx); - } else { - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); - rt2x00_desc_write(entry_priv->desc, 1, word); - } -} - -static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - - /* - * Initialize registers. - */ - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR0, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT0, - rt2x00dev->tx[0].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX0, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX0, 0); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR1, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT1, - rt2x00dev->tx[1].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX1, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX1, 0); - - entry_priv = rt2x00dev->tx[2].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR2, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT2, - rt2x00dev->tx[2].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX2, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX2, 0); - - entry_priv = rt2x00dev->tx[3].entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR3, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT3, - rt2x00dev->tx[3].limit); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX3, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX3, 0); - - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX4, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX4, 0); - - rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX5, 0); - rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX5, 0); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_write(rt2x00dev, RX_BASE_PTR, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RX_MAX_CNT, - rt2x00dev->rx[0].limit); - rt2x00mmio_register_write(rt2x00dev, RX_CRX_IDX, - rt2x00dev->rx[0].limit - 1); - rt2x00mmio_register_write(rt2x00dev, RX_DRX_IDX, 0); - - rt2800_disable_wpdma(rt2x00dev); - - rt2x00mmio_register_write(rt2x00dev, DELAY_INT_CFG, 0); - - return 0; -} - -/* * Device state switch handlers. */ -static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - } - - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - reg = 0; - if (state == STATE_RADIO_IRQ_ON) { - rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, 1); - rt2x00_set_field32(®, INT_MASK_CSR_TBTT, 1); - rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, 1); - rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1); - rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, 1); - } - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Wait for possibly running tasklets to finish. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->autowake_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - tasklet_kill(&rt2x00dev->pretbtt_tasklet); - } -} - -static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Reset DMA indexes - */ - rt2x00mmio_register_read(rt2x00dev, WPDMA_RST_IDX, ®); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); - rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg); - - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); - rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); - - if (rt2x00_is_pcie(rt2x00dev) && - (rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392))) { - rt2x00mmio_register_read(rt2x00dev, AUX_CTRL, ®); - rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1); - rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1); - rt2x00mmio_register_write(rt2x00dev, AUX_CTRL, reg); - } - - rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - reg = 0; - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00mmio_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - return 0; -} - static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) { int retval; - /* Wait for DMA, ignore error until we initialize queues. */ - rt2800_wait_wpdma_ready(rt2x00dev); - - if (unlikely(rt2800pci_init_queues(rt2x00dev))) - return -EIO; - - retval = rt2800_enable_radio(rt2x00dev); + retval = rt2800mmio_enable_radio(rt2x00dev); if (retval) return retval; @@ -555,15 +225,6 @@ return retval; } -static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00_is_soc(rt2x00dev)) { - rt2800_disable_radio(rt2x00dev); - rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); - } -} - static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { @@ -597,12 +258,11 @@ * After the radio has been disabled, the device should * be put to sleep for powersaving. */ - rt2800pci_disable_radio(rt2x00dev); rt2800pci_set_state(rt2x00dev, STATE_SLEEP); break; case STATE_RADIO_IRQ_ON: case STATE_RADIO_IRQ_OFF: - rt2800pci_toggle_irq(rt2x00dev, state); + rt2800mmio_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -623,478 +283,13 @@ } /* - * TX descriptor initialization - */ -static __le32 *rt2800pci_get_txwi(struct queue_entry *entry) -{ - return (__le32 *) entry->skb->data; -} - -static void rt2800pci_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - - /* - * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1 - * must contains a TXWI structure + 802.11 header + padding + 802.11 - * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and - * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11 - * data. It means that LAST_SEC0 is always 0. - */ - - /* - * Initialize TX descriptor - */ - word = 0; - rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); - rt2x00_desc_write(txd, 0, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W1_SD_LEN1, entry->skb->len); - rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, - !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W1_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W1_SD_LEN0, TXWI_DESC_SIZE); - rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0); - rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); - rt2x00_desc_write(txd, 1, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W2_SD_PTR1, - skbdesc->skb_dma + TXWI_DESC_SIZE); - rt2x00_desc_write(txd, 2, word); - - word = 0; - rt2x00_set_field32(&word, TXD_W3_WIV, - !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W3_QSEL, 2); - rt2x00_desc_write(txd, 3, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * RX control handlers - */ -static void rt2800pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *rxd = entry_priv->desc; - u32 word; - - rt2x00_desc_read(rxd, 3, &word); - - if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - /* - * Unfortunately we don't know the cipher type used during - * decryption. This prevents us from correct providing - * correct statistics through debugfs. - */ - rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR); - - if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) { - /* - * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. Unfortunately the descriptor doesn't contain - * any fields with the EIV/IV data either, so they can't - * be restored by rt2x00lib. - */ - rxdesc->flags |= RX_FLAG_IV_STRIPPED; - - /* - * The hardware has already checked the Michael Mic and has - * stripped it from the frame. Signal this to mac80211. - */ - rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; - - if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) - rxdesc->flags |= RX_FLAG_DECRYPTED; - else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) - rxdesc->flags |= RX_FLAG_MMIC_ERROR; - } - - if (rt2x00_get_field32(word, RXD_W3_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; - - if (rt2x00_get_field32(word, RXD_W3_L2PAD)) - rxdesc->dev_flags |= RXDONE_L2PAD; - - /* - * Process the RXWI structure that is at the start of the buffer. - */ - rt2800_process_rxwi(entry, rxdesc); -} - -/* - * Interrupt functions. - */ -static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) -{ - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; - - rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); -} - -static bool rt2800pci_txdone_entry_check(struct queue_entry *entry, u32 status) -{ - __le32 *txwi; - u32 word; - int wcid, tx_wcid; - - wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID); - - txwi = rt2800_drv_get_txwi(entry); - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - - return (tx_wcid == wcid); -} - -static bool rt2800pci_txdone_find_entry(struct queue_entry *entry, void *data) -{ - u32 status = *(u32 *)data; - - /* - * rt2800pci hardware might reorder frames when exchanging traffic - * with multiple BA enabled STAs. - * - * For example, a tx queue - * [ STA1 | STA2 | STA1 | STA2 ] - * can result in tx status reports - * [ STA1 | STA1 | STA2 | STA2 ] - * when the hw decides to aggregate the frames for STA1 into one AMPDU. - * - * To mitigate this effect, associate the tx status to the first frame - * in the tx queue with a matching wcid. - */ - if (rt2800pci_txdone_entry_check(entry, status) && - !test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - /* - * Got a matching frame, associate the tx status with - * the frame - */ - entry->status = status; - set_bit(ENTRY_DATA_STATUS_SET, &entry->flags); - return true; - } - - /* Check the next frame */ - return false; -} - -static bool rt2800pci_txdone_match_first(struct queue_entry *entry, void *data) -{ - u32 status = *(u32 *)data; - - /* - * Find the first frame without tx status and assign this status to it - * regardless if it matches or not. - */ - if (!test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - /* - * Got a matching frame, associate the tx status with - * the frame - */ - entry->status = status; - set_bit(ENTRY_DATA_STATUS_SET, &entry->flags); - return true; - } - - /* Check the next frame */ - return false; -} -static bool rt2800pci_txdone_release_entries(struct queue_entry *entry, - void *data) -{ - if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - rt2800_txdone_entry(entry, entry->status, - rt2800pci_get_txwi(entry)); - return false; - } - - /* No more frames to release */ - return true; -} - -static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue; - u32 status; - u8 qid; - int max_tx_done = 16; - - while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) { - qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE); - if (unlikely(qid >= QID_RX)) { - /* - * Unknown queue, this shouldn't happen. Just drop - * this tx status. - */ - rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n", - qid); - break; - } - - queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); - if (unlikely(queue == NULL)) { - /* - * The queue is NULL, this shouldn't happen. Stop - * processing here and drop the tx status - */ - rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n", - qid); - break; - } - - if (unlikely(rt2x00queue_empty(queue))) { - /* - * The queue is empty. Stop processing here - * and drop the tx status. - */ - rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n", - qid); - break; - } - - /* - * Let's associate this tx status with the first - * matching frame. - */ - if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, &status, - rt2800pci_txdone_find_entry)) { - /* - * We cannot match the tx status to any frame, so just - * use the first one. - */ - if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, &status, - rt2800pci_txdone_match_first)) { - rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n", - qid); - break; - } - } - - /* - * Release all frames with a valid tx status. - */ - rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, - Q_INDEX, NULL, - rt2800pci_txdone_release_entries); - - if (--max_tx_done == 0) - break; - } - - return !max_tx_done; -} - -static inline void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, irq_field, 1); - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt2800pci_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2800pci_txdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - - /* - * No need to enable the tx status interrupt here as we always - * leave it enabled to minimize the possibility of a tx status - * register overflow. See comment in interrupt handler. - */ -} - -static void rt2800pci_pretbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_pretbtt(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT); -} - -static void rt2800pci_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - u32 reg; - - rt2x00lib_beacondone(rt2x00dev); - - if (rt2x00dev->intf_ap_count) { - /* - * The rt2800pci hardware tbtt timer is off by 1us per tbtt - * causing beacon skew and as a result causing problems with - * some powersaving clients over time. Shorten the beacon - * interval every 64 beacons by 64us to mitigate this effect. - */ - if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) { - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - (rt2x00dev->beacon_int * 16) - 1); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) { - rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - (rt2x00dev->beacon_int * 16)); - rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - drv_data->tbtt_tick++; - drv_data->tbtt_tick %= BCN_TBTT_OFFSET; - } - - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT); -} - -static void rt2800pci_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE); -} - -static void rt2800pci_autowake_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2800pci_wakeup(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP); -} - -static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) -{ - u32 status; - int i; - - /* - * The TX_FIFO_STATUS interrupt needs special care. We should - * read TX_STA_FIFO but we should do it immediately as otherwise - * the register can overflow and we would lose status reports. - * - * Hence, read the TX_STA_FIFO register and copy all tx status - * reports into a kernel FIFO which is handled in the txstatus - * tasklet. We use a tasklet to process the tx status reports - * because we can schedule the tasklet multiple times (when the - * interrupt fires again during tx status processing). - * - * Furthermore we don't disable the TX_FIFO_STATUS - * interrupt here but leave it enabled so that the TX_STA_FIFO - * can also be read while the tx status tasklet gets executed. - * - * Since we have only one producer and one consumer we don't - * need to lock the kfifo. - */ - for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) { - rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status); - - if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) - break; - - if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) { - rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n"); - break; - } - } - - /* Schedule the tasklet for processing the tx status. */ - tasklet_schedule(&rt2x00dev->txstatus_tasklet); -} - -static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg, mask; - - /* Read status and ACK all interrupts */ - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits - * for interrupts and interrupt masks we can just use the value of - * INT_SOURCE_CSR to create the interrupt mask. - */ - mask = ~reg; - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) { - rt2800pci_txstatus_interrupt(rt2x00dev); - /* - * Never disable the TX_FIFO_STATUS interrupt. - */ - rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1); - } - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT)) - tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) - tasklet_schedule(&rt2x00dev->autowake_tasklet); - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®); - reg &= mask; - rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg); - spin_unlock(&rt2x00dev->irqmask_lock); - - return IRQ_HANDLED; -} - -/* * Device probe functions. */ static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { int retval; - if (rt2x00_is_soc(rt2x00dev)) - retval = rt2800pci_read_eeprom_soc(rt2x00dev); - else if (rt2800pci_efuse_detect(rt2x00dev)) + if (rt2800pci_efuse_detect(rt2x00dev)) retval = rt2800pci_read_eeprom_efuse(rt2x00dev); else retval = rt2800pci_read_eeprom_pci(rt2x00dev); @@ -1114,7 +309,7 @@ .sw_scan_start = rt2x00mac_sw_scan_start, .sw_scan_complete = rt2x00mac_sw_scan_complete, .get_stats = rt2x00mac_get_stats, - .get_tkip_seq = rt2800_get_tkip_seq, + .get_key_seq = rt2800_get_key_seq, .set_rts_threshold = rt2800_set_rts_threshold, .sta_add = rt2x00mac_sta_add, .sta_remove = rt2x00mac_sta_remove, @@ -1140,25 +335,25 @@ .read_eeprom = rt2800pci_read_eeprom, .hwcrypt_disabled = rt2800pci_hwcrypt_disabled, .drv_write_firmware = rt2800pci_write_firmware, - .drv_init_registers = rt2800pci_init_registers, - .drv_get_txwi = rt2800pci_get_txwi, + .drv_init_registers = rt2800mmio_init_registers, + .drv_get_txwi = rt2800mmio_get_txwi, }; static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { - .irq_handler = rt2800pci_interrupt, - .txstatus_tasklet = rt2800pci_txstatus_tasklet, - .pretbtt_tasklet = rt2800pci_pretbtt_tasklet, - .tbtt_tasklet = rt2800pci_tbtt_tasklet, - .rxdone_tasklet = rt2800pci_rxdone_tasklet, - .autowake_tasklet = rt2800pci_autowake_tasklet, + .irq_handler = rt2800mmio_interrupt, + .txstatus_tasklet = rt2800mmio_txstatus_tasklet, + .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, + .tbtt_tasklet = rt2800mmio_tbtt_tasklet, + .rxdone_tasklet = rt2800mmio_rxdone_tasklet, + .autowake_tasklet = rt2800mmio_autowake_tasklet, .probe_hw = rt2800_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, .load_firmware = rt2800_load_firmware, .initialize = rt2x00mmio_initialize, .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2800pci_get_entry_state, - .clear_entry = rt2800pci_clear_entry, + .get_entry_state = rt2800mmio_get_entry_state, + .clear_entry = rt2800mmio_clear_entry, .set_device_state = rt2800pci_set_device_state, .rfkill_poll = rt2800_rfkill_poll, .link_stats = rt2800_link_stats, @@ -1166,15 +361,15 @@ .link_tuner = rt2800_link_tuner, .gain_calibration = rt2800_gain_calibration, .vco_calibration = rt2800_vco_calibration, - .start_queue = rt2800pci_start_queue, - .kick_queue = rt2800pci_kick_queue, - .stop_queue = rt2800pci_stop_queue, + .start_queue = rt2800mmio_start_queue, + .kick_queue = rt2800mmio_kick_queue, + .stop_queue = rt2800mmio_stop_queue, .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2800pci_write_tx_desc, + .write_tx_desc = rt2800mmio_write_tx_desc, .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .clear_beacon = rt2800_clear_beacon, - .fill_rxdone = rt2800pci_fill_rxdone, + .fill_rxdone = rt2800mmio_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, .config_filter = rt2800_config_filter, @@ -1186,30 +381,6 @@ .sta_remove = rt2800_sta_remove, }; -static const struct data_queue_desc rt2800pci_queue_rx = { - .entry_num = 128, - .data_size = AGGREGATION_SIZE, - .desc_size = RXD_DESC_SIZE, - .winfo_size = RXWI_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_mmio), -}; - -static const struct data_queue_desc rt2800pci_queue_tx = { - .entry_num = 64, - .data_size = AGGREGATION_SIZE, - .desc_size = TXD_DESC_SIZE, - .winfo_size = TXWI_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_mmio), -}; - -static const struct data_queue_desc rt2800pci_queue_bcn = { - .entry_num = 8, - .data_size = 0, /* No DMA required for beacons */ - .desc_size = TXD_DESC_SIZE, - .winfo_size = TXWI_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_mmio), -}; - static const struct rt2x00_ops rt2800pci_ops = { .name = KBUILD_MODNAME, .drv_data_size = sizeof(struct rt2800_drv_data), @@ -1217,10 +388,7 @@ .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, .tx_queues = NUM_TX_QUEUES, - .extra_tx_headroom = TXWI_DESC_SIZE, - .rx = &rt2800pci_queue_rx, - .tx = &rt2800pci_queue_tx, - .bcn = &rt2800pci_queue_bcn, + .queue_init = rt2800mmio_queue_init, .lib = &rt2800pci_rt2x00_ops, .drv = &rt2800pci_rt2800_ops, .hw = &rt2800pci_mac80211_ops, @@ -1232,8 +400,7 @@ /* * RT2800pci module information. */ -#ifdef CONFIG_PCI -static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { +static const struct pci_device_id rt2800pci_device_table[] = { { PCI_DEVICE(0x1814, 0x0601) }, { PCI_DEVICE(0x1814, 0x0681) }, { PCI_DEVICE(0x1814, 0x0701) }, @@ -1277,38 +444,15 @@ #endif { 0, } }; -#endif /* CONFIG_PCI */ MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); -#ifdef CONFIG_PCI MODULE_FIRMWARE(FIRMWARE_RT2860); MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); -#endif /* CONFIG_PCI */ MODULE_LICENSE("GPL"); -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) -static int rt2800soc_probe(struct platform_device *pdev) -{ - return rt2x00soc_probe(pdev, &rt2800pci_ops); -} - -static struct platform_driver rt2800soc_driver = { - .driver = { - .name = "rt2800_wmac", - .owner = THIS_MODULE, - .mod_name = KBUILD_MODNAME, - }, - .probe = rt2800soc_probe, - .remove = rt2x00soc_remove, - .suspend = rt2x00soc_suspend, - .resume = rt2x00soc_resume, -}; -#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ - -#ifdef CONFIG_PCI static int rt2800pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) { @@ -1323,39 +467,5 @@ .suspend = rt2x00pci_suspend, .resume = rt2x00pci_resume, }; -#endif /* CONFIG_PCI */ - -static int __init rt2800pci_init(void) -{ - int ret = 0; - -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) - ret = platform_driver_register(&rt2800soc_driver); - if (ret) - return ret; -#endif -#ifdef CONFIG_PCI - ret = pci_register_driver(&rt2800pci_driver); - if (ret) { -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) - platform_driver_unregister(&rt2800soc_driver); -#endif - return ret; - } -#endif - - return ret; -} - -static void __exit rt2800pci_exit(void) -{ -#ifdef CONFIG_PCI - pci_unregister_driver(&rt2800pci_driver); -#endif -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) - platform_driver_unregister(&rt2800soc_driver); -#endif -} -module_init(rt2800pci_init); -module_exit(rt2800pci_exit); +module_pci_driver(rt2800pci_driver);