--- zzzz-none-000/linux-3.10.107/drivers/pci/hotplug/sgi_hotplug.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/pci/hotplug/sgi_hotplug.c	2021-02-04 17:41:59.000000000 +0000
@@ -9,6 +9,7 @@
  * Work to add BIOS PROM support was completed by Mike Habeck.
  */
 
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -29,7 +30,6 @@
 #include <asm/sn/sn_feature_sets.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/types.h>
-#include <linux/acpi.h>
 #include <asm/sn/acpi.h>
 
 #include "../pci.h"
@@ -188,7 +188,7 @@
 	return 0;
 }
 
-static struct hotplug_slot * sn_hp_destroy(void)
+static struct hotplug_slot *sn_hp_destroy(void)
 {
 	struct slot *slot;
 	struct pci_slot *pci_slot;
@@ -250,15 +250,13 @@
 	}
 
 	if (rc == PCI_L1_ERR) {
-		dev_dbg(&slot->pci_bus->self->dev,
-			"L1 failure %d with message: %s",
+		dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message: %s",
 			resp.resp_sub_errno, resp.resp_l1_msg);
 		return -EPERM;
 	}
 
 	if (rc) {
-		dev_dbg(&slot->pci_bus->self->dev,
-			"insert failed with error %d sub-error %d\n",
+		dev_dbg(&slot->pci_bus->self->dev, "insert failed with error %d sub-error %d\n",
 			rc, resp.resp_sub_errno);
 		return -EIO;
 	}
@@ -288,21 +286,18 @@
 	}
 
 	if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
-		dev_dbg(&slot->pci_bus->self->dev,
-			"Cannot remove last 33MHz card\n");
+		dev_dbg(&slot->pci_bus->self->dev, "Cannot remove last 33MHz card\n");
 		return -EPERM;
 	}
 
 	if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
-		dev_dbg(&slot->pci_bus->self->dev,
-			"L1 failure %d with message \n%s\n",
+		dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message \n%s\n",
 			resp.resp_sub_errno, resp.resp_l1_msg);
 		return -EPERM;
 	}
 
 	if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
-		dev_dbg(&slot->pci_bus->self->dev,
-			"remove failed with error %d sub-error %d\n",
+		dev_dbg(&slot->pci_bus->self->dev, "remove failed with error %d sub-error %d\n",
 			rc, resp.resp_sub_errno);
 		return -EIO;
 	}
@@ -414,11 +409,10 @@
 		acpi_handle rethandle;
 		acpi_status ret;
 
-		phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
+		phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
 
 		if (acpi_bus_get_device(phandle, &pdevice)) {
-			dev_dbg(&slot->pci_bus->self->dev,
-				"no parent device, assuming NULL\n");
+			dev_dbg(&slot->pci_bus->self->dev, "no parent device, assuming NULL\n");
 			pdevice = NULL;
 		}
 
@@ -447,10 +441,8 @@
 
 				ret = acpi_bus_scan(chandle);
 				if (ACPI_FAILURE(ret)) {
-					printk(KERN_ERR "%s: acpi_bus_scan "
-					       "failed (0x%x) for slot %d "
-					       "func %d\n", __func__,
-					       ret, (int)(adr>>16),
+					printk(KERN_ERR "%s: acpi_bus_scan failed (0x%x) for slot %d func %d\n",
+					       __func__, ret, (int)(adr>>16),
 					       (int)(adr&0xffff));
 					/* try to continue on */
 				}
@@ -459,20 +451,21 @@
 		acpi_scan_lock_release();
 	}
 
+	pci_lock_rescan_remove();
+
 	/* Call the driver for the new device */
 	pci_bus_add_devices(slot->pci_bus);
 	/* Call the drivers for the new devices subordinate to PPB */
 	if (new_ppb)
 		pci_bus_add_devices(new_bus);
 
+	pci_unlock_rescan_remove();
 	mutex_unlock(&sn_hotplug_mutex);
 
 	if (rc == 0)
-		dev_dbg(&slot->pci_bus->self->dev,
-			"insert operation successful\n");
+		dev_dbg(&slot->pci_bus->self->dev, "insert operation successful\n");
 	else
-		dev_dbg(&slot->pci_bus->self->dev,
-			"insert operation failed rc = %d\n", rc);
+		dev_dbg(&slot->pci_bus->self->dev, "insert operation failed rc = %d\n", rc);
 
 	return rc;
 }
@@ -482,7 +475,7 @@
 	struct slot *slot = bss_hotplug_slot->private;
 	struct pci_dev *dev, *temp;
 	int rc;
-	acpi_owner_id ssdt_id = 0;
+	acpi_handle ssdt_hdl = NULL;
 
 	/* Acquire update access to the bus */
 	mutex_lock(&sn_hotplug_mutex);
@@ -495,7 +488,7 @@
 
 	/* free the ACPI resources for the slot */
 	if (SN_ACPI_BASE_SUPPORT() &&
-            PCI_CONTROLLER(slot->pci_bus)->acpi_handle) {
+            PCI_CONTROLLER(slot->pci_bus)->companion) {
 		unsigned long long adr;
 		struct acpi_device *device;
 		acpi_handle phandle;
@@ -504,7 +497,7 @@
 		acpi_status ret;
 
 		/* Get the rootbus node pointer */
-		phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
+		phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
 
 		acpi_scan_lock_acquire();
 		/*
@@ -529,7 +522,7 @@
 			if (ACPI_SUCCESS(ret) &&
 			    (adr>>16) == (slot->device_num + 1)) {
 				/* retain the owner id */
-				acpi_get_id(chandle, &ssdt_id);
+				ssdt_hdl = chandle;
 
 				ret = acpi_bus_get_device(chandle,
 							  &device);
@@ -540,6 +533,7 @@
 		acpi_scan_lock_release();
 	}
 
+	pci_lock_rescan_remove();
 	/* Free the SN resources assigned to the Linux device.*/
 	list_for_each_entry_safe(dev, temp, &slot->pci_bus->devices, bus_list) {
 		if (PCI_SLOT(dev->devfn) != slot->device_num + 1)
@@ -550,15 +544,16 @@
 		pci_stop_and_remove_bus_device(dev);
 		pci_dev_put(dev);
 	}
+	pci_unlock_rescan_remove();
 
 	/* Remove the SSDT for the slot from the ACPI namespace */
-	if (SN_ACPI_BASE_SUPPORT() && ssdt_id) {
+	if (SN_ACPI_BASE_SUPPORT() && ssdt_hdl) {
 		acpi_status ret;
-		ret = acpi_unload_table_id(ssdt_id);
+		ret = acpi_unload_parent_table(ssdt_hdl);
 		if (ACPI_FAILURE(ret)) {
-			printk(KERN_ERR "%s: acpi_unload_table_id "
-			       "failed (0x%x) for id %d\n",
-			       __func__, ret, ssdt_id);
+			acpi_handle_err(ssdt_hdl,
+					"%s: acpi_unload_parent_table failed (0x%x)\n",
+					__func__, ret);
 			/* try to continue on */
 		}
 	}