--- zzzz-none-000/linux-3.10.107/drivers/pci/pcie/portdrv_pci.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/pci/pcie/portdrv_pci.c	2021-02-04 17:41:59.000000000 +0000
@@ -93,77 +93,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM_RUNTIME
-struct d3cold_info {
-	bool no_d3cold;
-	unsigned int d3cold_delay;
-};
-
-static int pci_dev_d3cold_info(struct pci_dev *pdev, void *data)
-{
-	struct d3cold_info *info = data;
-
-	info->d3cold_delay = max_t(unsigned int, pdev->d3cold_delay,
-				   info->d3cold_delay);
-	if (pdev->no_d3cold)
-		info->no_d3cold = true;
-	return 0;
-}
-
-static int pcie_port_runtime_suspend(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct d3cold_info d3cold_info = {
-		.no_d3cold	= false,
-		.d3cold_delay	= PCI_PM_D3_WAIT,
-	};
-
-	/*
-	 * If any subordinate device disable D3cold, we should not put
-	 * the port into D3cold.  The D3cold delay of port should be
-	 * the max of that of all subordinate devices.
-	 */
-	pci_walk_bus(pdev->subordinate, pci_dev_d3cold_info, &d3cold_info);
-	pdev->no_d3cold = d3cold_info.no_d3cold;
-	pdev->d3cold_delay = d3cold_info.d3cold_delay;
-	return 0;
-}
-
-static int pcie_port_runtime_resume(struct device *dev)
-{
-	return 0;
-}
-
-static int pci_dev_pme_poll(struct pci_dev *pdev, void *data)
-{
-	bool *pme_poll = data;
-
-	if (pdev->pme_poll)
-		*pme_poll = true;
-	return 0;
-}
-
-static int pcie_port_runtime_idle(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	bool pme_poll = false;
-
-	/*
-	 * If any subordinate device needs pme poll, we should keep
-	 * the port in D0, because we need port in D0 to poll it.
-	 */
-	pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll);
-	/* Delay for a short while to prevent too frequent suspend/resume */
-	if (!pme_poll)
-		pm_schedule_suspend(dev, 10);
-	return -EBUSY;
-}
-#else
-#define pcie_port_runtime_suspend	NULL
-#define pcie_port_runtime_resume	NULL
-#define pcie_port_runtime_idle		NULL
-#endif
-
 static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.suspend	= pcie_port_device_suspend,
 	.resume		= pcie_port_device_resume,
@@ -172,9 +101,6 @@
 	.poweroff	= pcie_port_device_suspend,
 	.restore	= pcie_port_device_resume,
 	.resume_noirq	= pcie_port_resume_noirq,
-	.runtime_suspend = pcie_port_runtime_suspend,
-	.runtime_resume = pcie_port_runtime_resume,
-	.runtime_idle	= pcie_port_runtime_idle,
 };
 
 #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
@@ -203,10 +129,6 @@
 	     (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
 		return -ENODEV;
 
-	if (!dev->irq && dev->pin) {
-		dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
-			 "check vendor BIOS\n", dev->vendor, dev->device);
-	}
 	status = pcie_port_device_register(dev);
 	if (status)
 		return status;
@@ -389,15 +311,15 @@
 	.probe		= pcie_portdrv_probe,
 	.remove		= pcie_portdrv_remove,
 
-	.err_handler 	= &pcie_portdrv_err_handler,
+	.err_handler	= &pcie_portdrv_err_handler,
 
-	.driver.pm 	= PCIE_PORTDRV_PM_OPS,
+	.driver.pm	= PCIE_PORTDRV_PM_OPS,
 };
 
 static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
 {
 	pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
-			d->ident);
+		  d->ident);
 	pcie_pme_disable_msi();
 	return 0;
 }
@@ -411,7 +333,7 @@
 	 .ident = "MSI Wind U-100",
 	 .matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR,
-		     		"MICRO-STAR INTERNATIONAL CO., LTD"),
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
 		     DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
 		     },
 	 },