--- zzzz-none-000/linux-3.10.107/drivers/pinctrl/Kconfig 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/pinctrl/Kconfig 2021-02-04 17:41:59.000000000 +0000 @@ -5,16 +5,14 @@ config PINCTRL bool -if PINCTRL - menu "Pin controllers" depends on PINCTRL config PINMUX - bool "Support pin multiplexing controllers" + bool "Support pin multiplexing controllers" if COMPILE_TEST config PINCONF - bool "Support pin configuration controllers" + bool "Support pin configuration controllers" if COMPILE_TEST config GENERIC_PINCONF bool @@ -26,28 +24,34 @@ help Say Y here to add some extra checks and diagnostics to PINCTRL calls. -config PINCTRL_ABX500 - bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" - depends on AB8500_CORE +config PINCTRL_ADI2 + bool "ADI pin controller driver" + depends on BLACKFIN + select PINMUX + select IRQ_DOMAIN + help + This is the pin controller and gpio driver for ADI BF54x, BF60x and + future processors. This option is selected automatically when specific + machine and arch are selected to build. + +config PINCTRL_AS3722 + bool "Pinctrl and GPIO driver for ams AS3722 PMIC" + depends on MFD_AS3722 && GPIOLIB + select PINMUX select GENERIC_PINCONF help - Select this to enable the ABx500 family IC GPIO driver - -config PINCTRL_AB8500 - bool "AB8500 pin controller driver" - depends on PINCTRL_ABX500 && ARCH_U8500 - -config PINCTRL_AB8540 - bool "AB8540 pin controller driver" - depends on PINCTRL_ABX500 && ARCH_U8500 - -config PINCTRL_AB9540 - bool "AB9540 pin controller driver" - depends on PINCTRL_ABX500 && ARCH_U8500 - -config PINCTRL_AB8505 - bool "AB8505 pin controller driver" - depends on PINCTRL_ABX500 && ARCH_U8500 + AS3722 device supports the configuration of GPIO pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the GPIO pins of AS3722 devices. It also + supports the GPIO functionality through gpiolib. + +config PINCTRL_BF54x + def_bool y if BF54x + select PINCTRL_ADI2 + +config PINCTRL_BF60x + def_bool y if BF60x + select PINCTRL_ADI2 config PINCTRL_AT91 bool "AT91 pinctrl driver" @@ -55,58 +59,45 @@ depends on ARCH_AT91 select PINMUX select PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP help Say Y here to enable the at91 pinctrl driver -config PINCTRL_BCM2835 - bool - select PINMUX - select PINCONF - -config PINCTRL_IMX - bool - select PINMUX - select PINCONF - -config PINCTRL_IMX35 - bool "IMX35 pinctrl driver" +config PINCTRL_AT91PIO4 + bool "AT91 PIO4 pinctrl driver" depends on OF - depends on SOC_IMX35 - select PINCTRL_IMX - help - Say Y here to enable the imx35 pinctrl driver - -config PINCTRL_IMX51 - bool "IMX51 pinctrl driver" - depends on OF - depends on SOC_IMX51 - select PINCTRL_IMX + depends on ARCH_AT91 + select PINMUX + select GENERIC_PINCONF + select GPIOLIB + select GPIOLIB_IRQCHIP + select OF_GPIO help - Say Y here to enable the imx51 pinctrl driver + Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4 + controller available on sama5d2 SoC. -config PINCTRL_IMX53 - bool "IMX53 pinctrl driver" - depends on OF - depends on SOC_IMX53 - select PINCTRL_IMX +config PINCTRL_AMD + bool "AMD GPIO pin control" + depends on GPIOLIB + select GPIOLIB_IRQCHIP + select PINCONF + select GENERIC_PINCONF help - Say Y here to enable the imx53 pinctrl driver + driver for memory mapped GPIO functionality on AMD platforms + (x86 or arm).Most pins are usually muxed to some other + functionality by firmware,so only a small amount is available + for gpio use. -config PINCTRL_IMX6Q - bool "IMX6Q/DL pinctrl driver" - depends on OF - depends on SOC_IMX6Q - select PINCTRL_IMX - help - Say Y here to enable the imx6q/dl pinctrl driver + Requires ACPI/FDT device enumeration code to set up a platform + device. -config PINCTRL_IMX6SL - bool "IMX6SL pinctrl driver" - depends on OF - depends on SOC_IMX6SL - select PINCTRL_IMX - help - Say Y here to enable the imx6sl pinctrl driver +config PINCTRL_DIGICOLOR + bool + depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST) + select PINMUX + select GENERIC_PINCONF config PINCTRL_LANTIQ bool @@ -114,41 +105,36 @@ select PINMUX select PINCONF +config PINCTRL_LPC18XX + bool "NXP LPC18XX/43XX SCU pinctrl driver" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + default ARCH_LPC18XX + select PINMUX + select GENERIC_PINCONF + help + Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). + config PINCTRL_FALCON bool depends on SOC_FALCON depends on PINCTRL_LANTIQ -config PINCTRL_MXS +config PINCTRL_MESON bool + depends on OF select PINMUX select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO -config PINCTRL_IMX23 - bool - select PINCTRL_MXS - -config PINCTRL_IMX28 +config PINCTRL_ROCKCHIP bool - select PINCTRL_MXS - -config PINCTRL_NOMADIK - bool "Nomadik pin controller driver" - depends on ARCH_U8500 || ARCH_NOMADIK select PINMUX - select PINCONF - -config PINCTRL_STN8815 - bool "STN8815 pin controller driver" - depends on PINCTRL_NOMADIK && ARCH_NOMADIK - -config PINCTRL_DB8500 - bool "DB8500 pin controller driver" - depends on PINCTRL_NOMADIK && ARCH_U8500 - -config PINCTRL_DB8540 - bool "DB8540 pin controller driver" - depends on PINCTRL_NOMADIK && ARCH_U8500 + select GENERIC_PINCONF + select GENERIC_IRQ_CHIP + select MFD_SYSCON config PINCTRL_SINGLE tristate "One-register-per-pin type device tree based pinctrl driver" @@ -160,14 +146,27 @@ This selects the device tree based generic pinctrl driver. config PINCTRL_SIRF - bool "CSR SiRFprimaII/SiRFmarco pin controller driver" + bool "CSR SiRFprimaII pin controller driver" depends on ARCH_SIRF select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP -config PINCTRL_SUNXI - bool +config PINCTRL_PISTACHIO + def_bool y if MACH_PISTACHIO + depends on GPIOLIB select PINMUX select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select OF_GPIO + +config PINCTRL_ST + bool + depends on OF + select PINMUX + select PINCONF + select GPIOLIB_IRQCHIP config PINCTRL_TEGRA bool @@ -186,6 +185,32 @@ bool select PINCTRL_TEGRA +config PINCTRL_TEGRA124 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA210 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA_XUSB + def_bool y if ARCH_TEGRA + select GENERIC_PHY + select PINCONF + select PINMUX + +config PINCTRL_TZ1090 + bool "Toumaz Xenif TZ1090 pin control driver" + depends on SOC_TZ1090 + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_TZ1090_PDC + bool "Toumaz Xenif TZ1090 PDC pin control driver" + depends on SOC_TZ1090 + select PINMUX + select PINCONF + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 @@ -195,42 +220,55 @@ config PINCTRL_COH901 bool "ST-Ericsson U300 COH 901 335/571 GPIO" depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 + select GPIOLIB_IRQCHIP help Say yes here to support GPIO interface on ST-Ericsson U300. The names of the two IP block variants supported are COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 ports of 8 GPIO pins each. -config PINCTRL_SAMSUNG - bool +config PINCTRL_PALMAS + bool "Pinctrl driver for the PALMAS Series MFD devices" + depends on OF && MFD_PALMAS select PINMUX - select PINCONF - -config PINCTRL_EXYNOS - bool "Pinctrl driver data for Samsung EXYNOS SoCs" - depends on OF && GPIOLIB - select PINCTRL_SAMSUNG - -config PINCTRL_EXYNOS5440 - bool "Samsung EXYNOS5440 SoC pinctrl driver" + select GENERIC_PINCONF + help + Palmas device supports the configuration of pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the Palmas series devices like + TPS65913, TPS80036 etc. + +config PINCTRL_ZYNQ + bool "Pinctrl driver for Xilinx Zynq" + depends on ARCH_ZYNQ select PINMUX - select PINCONF - -config PINCTRL_S3C64XX - bool "Samsung S3C64XX SoC pinctrl driver" - depends on ARCH_S3C64XX - select PINCTRL_SAMSUNG + select GENERIC_PINCONF + help + This selectes the pinctrl driver for Xilinx Zynq. +source "drivers/pinctrl/bcm/Kconfig" +source "drivers/pinctrl/berlin/Kconfig" +source "drivers/pinctrl/freescale/Kconfig" +source "drivers/pinctrl/intel/Kconfig" source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/nomadik/Kconfig" +source "drivers/pinctrl/qcom/Kconfig" +source "drivers/pinctrl/samsung/Kconfig" source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/sunxi/Kconfig" +source "drivers/pinctrl/uniphier/Kconfig" source "drivers/pinctrl/vt8500/Kconfig" +source "drivers/pinctrl/mediatek/Kconfig" config PINCTRL_XWAY bool depends on SOC_TYPE_XWAY depends on PINCTRL_LANTIQ -endmenu +config PINCTRL_TB10X + bool + depends on OF && ARC_PLAT_TB10X + select GPIOLIB -endif +endmenu