--- zzzz-none-000/linux-3.10.107/drivers/power/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/power/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -137,6 +137,13 @@
 	  Say Y to enable support for the battery on the Sharp Zaurus
 	  SL-5500 (collie) models.
 
+config BATTERY_IPAQ_MICRO
+	tristate "iPAQ Atmel Micro ASIC battery driver"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Choose this option if you want to monitor battery status on
+	  Compaq/HP iPAQ h3100 and h3600.
+
 config BATTERY_WM97XX
 	bool "WM97xx generic battery driver"
 	depends on TOUCHSCREEN_WM97XX=y
@@ -150,26 +157,25 @@
 	  Say Y to include support for SBS battery driver for SBS-compliant
 	  gas gauges.
 
-config BATTERY_BQ27x00
-	tristate "BQ27x00 battery driver"
-	depends on I2C || I2C=n
-	help
-	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
-
-config BATTERY_BQ27X00_I2C
-	bool "BQ27200/BQ27500 support"
-	depends on BATTERY_BQ27x00
+config BATTERY_BQ27XXX
+	tristate "BQ27xxx battery driver"
+	help
+	  Say Y here to enable support for batteries with BQ27xxx (I2C/HDQ) chips.
+
+config BATTERY_BQ27XXX_I2C
+	bool "BQ27xxx I2C support"
+	depends on BATTERY_BQ27XXX
 	depends on I2C
 	default y
 	help
-	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
+	  Say Y here to enable support for batteries with BQ27xxx (I2C) chips.
 
-config BATTERY_BQ27X00_PLATFORM
-	bool "BQ27000 support"
-	depends on BATTERY_BQ27x00
+config BATTERY_BQ27XXX_PLATFORM
+	bool "BQ27xxx HDQ support"
+	depends on BATTERY_BQ27XXX
 	default y
 	help
-	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
+	  Say Y here to enable support for batteries with BQ27xxx (HDQ) chips.
 
 config BATTERY_DA9030
 	tristate "DA9030 battery driver"
@@ -185,6 +191,44 @@
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9052 PMIC.
 
+config CHARGER_DA9150
+	tristate "Dialog Semiconductor DA9150 Charger support"
+	depends on MFD_DA9150
+	depends on DA9150_GPADC
+	depends on IIO
+	help
+	  Say Y here to enable support for charger unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-charger.
+
+config BATTERY_DA9150
+	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+	depends on MFD_DA9150
+	help
+	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-fg.
+
+config AXP288_CHARGER
+	tristate "X-Powers AXP288 Charger"
+	depends on MFD_AXP20X && EXTCON_AXP288
+	help
+	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
+	  integrated charger.
+
+config AXP288_FUEL_GAUGE
+	tristate "X-Powers AXP288 Fuel Gauge"
+	depends on MFD_AXP20X && IIO
+	help
+	  Say yes here to have support for X-Power power management IC (PMIC)
+	  Fuel Gauge. The device provides battery statistics and status
+	  monitoring as well as alerts for battery over/under voltage and
+	  over/under temperature.
+
 config BATTERY_MAX17040
 	tristate "Maxim MAX17040 Fuel Gauge"
 	depends on I2C
@@ -196,6 +240,7 @@
 config BATTERY_MAX17042
 	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
 	  in handheld and portable equipment. The MAX17042 is configured
@@ -216,6 +261,13 @@
 	help
 	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 
+config BATTERY_TWL4030_MADC
+	tristate "TWL4030 MADC battery driver"
+	depends on TWL4030_MADC
+	help
+	  Say Y here to enable this dumb driver for batteries managed
+	  through the TWL4030 MADC.
+
 config CHARGER_88PM860X
 	tristate "Marvell 88PM860x Charger driver"
 	depends on MFD_88PM860X && BATTERY_88PM860X
@@ -262,7 +314,6 @@
 
 config CHARGER_MAX8903
 	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
 	  The driver supports controlling charger-enable and current-limit
@@ -271,7 +322,7 @@
 
 config CHARGER_TWL4030
 	tristate "OMAP TWL4030 BCI charger driver"
-	depends on TWL4030_CORE
+	depends on IIO && TWL4030_CORE
 	help
 	  Say Y here to enable support for TWL4030 Battery Charge Interface.
 
@@ -291,7 +342,7 @@
 
 config CHARGER_GPIO
 	tristate "GPIO charger"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y to include support for chargers which report their online status
 	  through a GPIO pin.
@@ -301,7 +352,7 @@
 
 config CHARGER_MANAGER
 	bool "Battery charger manager for multiple chargers"
-	depends on REGULATOR && RTC_CLASS
+	depends on REGULATOR
 	select EXTCON
 	help
           Say Y to enable charger-manager support, which allows multiple
@@ -310,6 +361,19 @@
           runtime and in suspend-to-RAM by waking up the system periodically
           with help of suspend_again support.
 
+config CHARGER_MAX14577
+	tristate "Maxim MAX14577/77836 battery charger driver"
+	depends on MFD_MAX14577
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX14577/77836 MUICs.
+
+config CHARGER_MAX77693
+	tristate "Maxim MAX77693 battery charger driver"
+	depends on MFD_MAX77693
+	help
+	  Say Y to enable support for the Maxim MAX77693 battery charger.
+
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
 	depends on MFD_MAX8997 && REGULATOR_MAX8997
@@ -324,6 +388,18 @@
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX8998/LP3974 PMICs.
 
+config CHARGER_QCOM_SMBB
+	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+	depends on MFD_SPMI_PMIC || COMPILE_TEST
+	depends on OF
+	help
+	  Say Y to include support for the Switch-Mode Battery Charger and
+	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
+	  is an integrated, single-cell lithium-ion battery charger.  DT
+	  configuration is required for loading, see the devicetree
+	  documentation for more detail.  The base name for this driver is
+	  'pm8941_charger'.
+
 config CHARGER_BQ2415X
 	tristate "TI BQ2415x battery charger driver"
 	depends on I2C
@@ -334,6 +410,37 @@
 	  You'll need this driver to charge batteries on e.g. Nokia
 	  RX-51/N900.
 
+config CHARGER_BQ24190
+	tristate "TI BQ24190 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y to enable support for the TI BQ24190 battery charger.
+
+config CHARGER_BQ24257
+	tristate "TI BQ24250/24251/24257 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	depends on REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+	  chargers.
+
+config CHARGER_BQ24735
+	tristate "TI BQ24735 battery charger support"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y to enable support for the TI BQ24735 battery charger.
+
+config CHARGER_BQ25890
+	tristate "TI BQ25890 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ25890 battery charger.
+
 config CHARGER_SMB347
 	tristate "Summit Microelectronics SMB347 Battery Charger"
 	depends on I2C
@@ -349,6 +456,21 @@
 	 Say Y here to enable support for battery charging with TPS65090
 	 PMIC chips.
 
+config CHARGER_TPS65217
+	tristate "TPS65217 battery charger driver"
+	depends on MFD_TPS65217
+	help
+	 Say Y here to enable support for battery charging with TPS65217
+	 PMIC chips.
+
+config BATTERY_GAUGE_LTC2941
+	tristate "LTC2941/LTC2943 Battery Gauge Driver"
+	depends on I2C
+	help
+	  Say Y here to include support for LTC2941 and LTC2943 Battery
+	  Gauge IC. The driver reports the charge count continuously, and
+	  measures the voltage and temperature every 10 seconds.
+
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
 	depends on AB8500_CORE && AB8500_GPADC
@@ -357,13 +479,38 @@
 
 config BATTERY_GOLDFISH
 	tristate "Goldfish battery driver"
-	depends on GENERIC_HARDIRQS
+	depends on GOLDFISH || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.
 
+config BATTERY_RT5033
+	tristate "RT5033 fuel gauge support"
+	depends on MFD_RT5033
+	help
+	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+	  The fuelgauge calculates and determines the battery state of charge
+	  according to battery open circuit voltage.
+
+config CHARGER_RT9455
+	tristate "Richtek RT9455 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for Richtek RT9455 battery charger.
+
+config AXP20X_POWER
+	tristate "AXP20x power supply driver"
+	depends on MFD_AXP20X
+	help
+	  This driver provides support for the power supply features of
+	  AXP20x PMIC.
+
 source "drivers/power/reset/Kconfig"
 
 endif # POWER_SUPPLY
 
 source "drivers/power/avs/Kconfig"
+source "drivers/power/qcom/Kconfig"