--- zzzz-none-000/linux-3.10.107/drivers/power/power_supply_sysfs.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/power/power_supply_sysfs.c	2021-02-04 17:41:59.000000000 +0000
@@ -73,19 +73,20 @@
 	const ptrdiff_t off = attr - power_supply_attrs;
 	union power_supply_propval value;
 
-	if (off == POWER_SUPPLY_PROP_TYPE)
-		value.intval = psy->type;
-	else
-		ret = psy->get_property(psy, off, &value);
-
-	if (ret < 0) {
-		if (ret == -ENODATA)
-			dev_dbg(dev, "driver has no data for `%s' property\n",
-				attr->attr.name);
-		else if (ret != -ENODEV)
-			dev_err(dev, "driver failed to report `%s' property: %zd\n",
-				attr->attr.name, ret);
-		return ret;
+	if (off == POWER_SUPPLY_PROP_TYPE) {
+		value.intval = psy->desc->type;
+	} else {
+		ret = power_supply_get_property(psy, off, &value);
+
+		if (ret < 0) {
+			if (ret == -ENODATA)
+				dev_dbg(dev, "driver has no data for `%s' property\n",
+					attr->attr.name);
+			else if (ret != -ENODEV)
+				dev_err(dev, "driver failed to report `%s' property: %zd\n",
+					attr->attr.name, ret);
+			return ret;
+		}
 	}
 
 	if (off == POWER_SUPPLY_PROP_STATUS)
@@ -118,13 +119,13 @@
 	long long_val;
 
 	/* TODO: support other types than int */
-	ret = strict_strtol(buf, 10, &long_val);
+	ret = kstrtol(buf, 10, &long_val);
 	if (ret < 0)
 		return ret;
 
 	value.intval = long_val;
 
-	ret = psy->set_property(psy, off, &value);
+	ret = power_supply_set_property(psy, off, &value);
 	if (ret < 0)
 		return ret;
 
@@ -149,9 +150,11 @@
 	POWER_SUPPLY_ATTR(voltage_now),
 	POWER_SUPPLY_ATTR(voltage_avg),
 	POWER_SUPPLY_ATTR(voltage_ocv),
+	POWER_SUPPLY_ATTR(voltage_boot),
 	POWER_SUPPLY_ATTR(current_max),
 	POWER_SUPPLY_ATTR(current_now),
 	POWER_SUPPLY_ATTR(current_avg),
+	POWER_SUPPLY_ATTR(current_boot),
 	POWER_SUPPLY_ATTR(power_now),
 	POWER_SUPPLY_ATTR(power_avg),
 	POWER_SUPPLY_ATTR(charge_full_design),
@@ -167,6 +170,7 @@
 	POWER_SUPPLY_ATTR(constant_charge_voltage_max),
 	POWER_SUPPLY_ATTR(charge_control_limit),
 	POWER_SUPPLY_ATTR(charge_control_limit_max),
+	POWER_SUPPLY_ATTR(input_current_limit),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
@@ -178,6 +182,8 @@
 	POWER_SUPPLY_ATTR(capacity_alert_max),
 	POWER_SUPPLY_ATTR(capacity_level),
 	POWER_SUPPLY_ATTR(temp),
+	POWER_SUPPLY_ATTR(temp_max),
+	POWER_SUPPLY_ATTR(temp_min),
 	POWER_SUPPLY_ATTR(temp_alert_min),
 	POWER_SUPPLY_ATTR(temp_alert_max),
 	POWER_SUPPLY_ATTR(temp_ambient),
@@ -189,6 +195,8 @@
 	POWER_SUPPLY_ATTR(time_to_full_avg),
 	POWER_SUPPLY_ATTR(type),
 	POWER_SUPPLY_ATTR(scope),
+	POWER_SUPPLY_ATTR(charge_term_current),
+	POWER_SUPPLY_ATTR(calibrate),
 	/* Properties of type `const char *' */
 	POWER_SUPPLY_ATTR(model_name),
 	POWER_SUPPLY_ATTR(manufacturer),
@@ -210,12 +218,12 @@
 	if (attrno == POWER_SUPPLY_PROP_TYPE)
 		return mode;
 
-	for (i = 0; i < psy->num_properties; i++) {
-		int property = psy->properties[i];
+	for (i = 0; i < psy->desc->num_properties; i++) {
+		int property = psy->desc->properties[i];
 
 		if (property == attrno) {
-			if (psy->property_is_writeable &&
-			    psy->property_is_writeable(psy, property) > 0)
+			if (psy->desc->property_is_writeable &&
+			    psy->desc->property_is_writeable(psy, property) > 0)
 				mode |= S_IWUSR;
 
 			return mode;
@@ -271,14 +279,14 @@
 
 	dev_dbg(dev, "uevent\n");
 
-	if (!psy || !psy->dev) {
+	if (!psy || !psy->desc) {
 		dev_dbg(dev, "No power supply yet\n");
 		return ret;
 	}
 
-	dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name);
+	dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->desc->name);
 
-	ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->name);
+	ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->desc->name);
 	if (ret)
 		return ret;
 
@@ -286,11 +294,11 @@
 	if (!prop_buf)
 		return -ENOMEM;
 
-	for (j = 0; j < psy->num_properties; j++) {
+	for (j = 0; j < psy->desc->num_properties; j++) {
 		struct device_attribute *attr;
 		char *line;
 
-		attr = &power_supply_attrs[psy->properties[j]];
+		attr = &power_supply_attrs[psy->desc->properties[j]];
 
 		ret = power_supply_show_property(dev, attr, prop_buf);
 		if (ret == -ENODEV || ret == -ENODATA) {