--- zzzz-none-000/linux-3.10.107/drivers/rtc/rtc-v3020.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/rtc/rtc-v3020.c	2021-02-04 17:41:59.000000000 +0000
@@ -16,7 +16,7 @@
  *				- Use the generic rtc class
  *
  *  ??-???-2004: Someone at Compulab
- *  			- Initial driver creation.
+ *			- Initial driver creation.
  *
  */
 #include <linux/platform_device.h>
@@ -49,18 +49,13 @@
 #define V3020_RD	2
 #define V3020_IO	3
 
-struct v3020_gpio {
-	const char *name;
-	unsigned int gpio;
-};
-
 struct v3020 {
 	/* MMIO access */
 	void __iomem *ioaddress;
 	int leftshift;
 
 	/* GPIO access */
-	struct v3020_gpio *gpio;
+	struct gpio *gpio;
 
 	struct v3020_chip_ops *ops;
 
@@ -107,48 +102,34 @@
 	.write_bit	= v3020_mmio_write_bit,
 };
 
-static struct v3020_gpio v3020_gpio[] = {
-	{ "RTC CS", 0 },
-	{ "RTC WR", 0 },
-	{ "RTC RD", 0 },
-	{ "RTC IO", 0 },
+static struct gpio v3020_gpio[] = {
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC CS"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC WR"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC RD"},
+	{ 0, GPIOF_OUT_INIT_HIGH, "RTC IO"},
 };
 
 static int v3020_gpio_map(struct v3020 *chip, struct platform_device *pdev,
 			  struct v3020_platform_data *pdata)
 {
-	int i, err;
+	int err;
 
 	v3020_gpio[V3020_CS].gpio = pdata->gpio_cs;
 	v3020_gpio[V3020_WR].gpio = pdata->gpio_wr;
 	v3020_gpio[V3020_RD].gpio = pdata->gpio_rd;
 	v3020_gpio[V3020_IO].gpio = pdata->gpio_io;
 
-	for (i = 0; i < ARRAY_SIZE(v3020_gpio); i++) {
-		err = gpio_request(v3020_gpio[i].gpio, v3020_gpio[i].name);
-		if (err)
-			goto err_request;
-
-		gpio_direction_output(v3020_gpio[i].gpio, 1);
-	}
-
-	chip->gpio = v3020_gpio;
+	err = gpio_request_array(v3020_gpio, ARRAY_SIZE(v3020_gpio));
 
-	return 0;
-
-err_request:
-	while (--i >= 0)
-		gpio_free(v3020_gpio[i].gpio);
+	if (!err)
+		chip->gpio = v3020_gpio;
 
 	return err;
 }
 
 static void v3020_gpio_unmap(struct v3020 *chip)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(v3020_gpio); i++)
-		gpio_free(v3020_gpio[i].gpio);
+	gpio_free_array(v3020_gpio, ARRAY_SIZE(v3020_gpio));
 }
 
 static void v3020_gpio_write_bit(struct v3020 *chip, unsigned char bit)
@@ -278,13 +259,13 @@
 	dev_dbg(dev, "tm_year: %i\n", dt->tm_year);
 
 	/* Write all the values to ram... */
-	v3020_set_reg(chip, V3020_SECONDS, 	bin2bcd(dt->tm_sec));
-	v3020_set_reg(chip, V3020_MINUTES, 	bin2bcd(dt->tm_min));
-	v3020_set_reg(chip, V3020_HOURS, 	bin2bcd(dt->tm_hour));
+	v3020_set_reg(chip, V3020_SECONDS,	bin2bcd(dt->tm_sec));
+	v3020_set_reg(chip, V3020_MINUTES,	bin2bcd(dt->tm_min));
+	v3020_set_reg(chip, V3020_HOURS,	bin2bcd(dt->tm_hour));
 	v3020_set_reg(chip, V3020_MONTH_DAY,	bin2bcd(dt->tm_mday));
-	v3020_set_reg(chip, V3020_MONTH,     bin2bcd(dt->tm_mon + 1));
-	v3020_set_reg(chip, V3020_WEEK_DAY, 	bin2bcd(dt->tm_wday));
-	v3020_set_reg(chip, V3020_YEAR, 	bin2bcd(dt->tm_year % 100));
+	v3020_set_reg(chip, V3020_MONTH,	bin2bcd(dt->tm_mon + 1));
+	v3020_set_reg(chip, V3020_WEEK_DAY,	bin2bcd(dt->tm_wday));
+	v3020_set_reg(chip, V3020_YEAR,		bin2bcd(dt->tm_year % 100));
 
 	/* ...and set the clock. */
 	v3020_set_reg(chip, V3020_CMD_RAM2CLOCK, 0);
@@ -303,7 +284,7 @@
 
 static int rtc_probe(struct platform_device *pdev)
 {
-	struct v3020_platform_data *pdata = pdev->dev.platform_data;
+	struct v3020_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct v3020 *chip;
 	int retval = -EBUSY;
 	int i;
@@ -320,7 +301,7 @@
 
 	retval = chip->ops->map_io(chip, pdev, pdata);
 	if (retval)
-		goto err_chip;
+		return retval;
 
 	/* Make sure the v3020 expects a communication cycle
 	 * by reading 8 times */
@@ -364,7 +345,7 @@
 
 err_io:
 	chip->ops->unmap_io(chip);
-err_chip:
+
 	return retval;
 }
 
@@ -382,7 +363,6 @@
 	.remove = rtc_remove,
 	.driver = {
 		.name	= "v3020",
-		.owner	= THIS_MODULE,
 	},
 };