--- zzzz-none-000/linux-3.10.107/drivers/scsi/device_handler/scsi_dh_alua.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/scsi/device_handler/scsi_dh_alua.c	2021-02-04 17:41:59.000000000 +0000
@@ -85,13 +85,6 @@
 static char print_alua_state(int);
 static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
 
-static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
-{
-	struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
-	BUG_ON(scsi_dh_data == NULL);
-	return ((struct alua_dh_data *) scsi_dh_data->buf);
-}
-
 static int realloc_buffer(struct alua_dh_data *h, unsigned len)
 {
 	if (h->buff && h->buff != h->inq)
@@ -115,11 +108,12 @@
 
 	rq = blk_get_request(q, rw, GFP_NOIO);
 
-	if (!rq) {
+	if (IS_ERR(rq)) {
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: blk_get_request failed\n", __func__);
 		return NULL;
 	}
+	blk_rq_set_block_pc(rq);
 
 	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
 		blk_put_request(rq);
@@ -128,7 +122,6 @@
 		return NULL;
 	}
 
-	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 			 REQ_FAILFAST_DRIVER;
 	rq->retries = ALUA_FAILOVER_RETRIES;
@@ -474,6 +467,13 @@
 			 * LUN Not Ready -- Offline
 			 */
 			return SUCCESS;
+		if (sdev->allow_restart &&
+		    sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
+			/*
+			 * if the device is not started, we need to wake
+			 * the error handler to start the motor
+			 */
+			return FAILED;
 		break;
 	case UNIT_ATTENTION:
 		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
@@ -481,6 +481,11 @@
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
 			return ADD_TO_MLQUEUE;
+		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04)
+			/*
+			 * Device internal reset
+			 */
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01)
 			/*
 			 * Mode Parameters Changed
@@ -517,12 +522,13 @@
 /*
  * alua_rtpg - Evaluate REPORT TARGET GROUP STATES
  * @sdev: the device to be evaluated.
+ * @wait_for_transition: if nonzero, wait ALUA_FAILOVER_TIMEOUT seconds for device to exit transitioning state
  *
  * Evaluate the Target Port Group State.
  * Returns SCSI_DH_DEV_OFFLINED if the path is
  * found to be unusable.
  */
-static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_for_transition)
 {
 	struct scsi_sense_hdr sense_hdr;
 	int len, k, off, valid_states = 0;
@@ -594,7 +600,7 @@
 	else
 		h->transition_tmo = ALUA_FAILOVER_TIMEOUT;
 
-	if (orig_transition_tmo != h->transition_tmo) {
+	if (wait_for_transition && (orig_transition_tmo != h->transition_tmo)) {
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: transition timeout set to %d seconds\n",
 			    ALUA_DH_NAME, h->transition_tmo);
@@ -632,14 +638,19 @@
 
 	switch (h->state) {
 	case TPGS_STATE_TRANSITIONING:
-		if (time_before(jiffies, expiry)) {
-			/* State transition, retry */
-			interval += 2000;
-			msleep(interval);
-			goto retry;
+		if (wait_for_transition) {
+			if (time_before(jiffies, expiry)) {
+				/* State transition, retry */
+				interval += 2000;
+				msleep(interval);
+				goto retry;
+			}
+			err = SCSI_DH_RETRY;
+		} else {
+			err = SCSI_DH_OK;
 		}
+
 		/* Transitioning time exceeded, set port to standby */
-		err = SCSI_DH_RETRY;
 		h->state = TPGS_STATE_STANDBY;
 		break;
 	case TPGS_STATE_OFFLINE:
@@ -673,7 +684,7 @@
 	if (err != SCSI_DH_OK)
 		goto out;
 
-	err = alua_rtpg(sdev, h);
+	err = alua_rtpg(sdev, h, 0);
 	if (err != SCSI_DH_OK)
 		goto out;
 
@@ -691,7 +702,7 @@
  */
 static int alua_set_params(struct scsi_device *sdev, const char *params)
 {
-	struct alua_dh_data *h = get_alua_data(sdev);
+	struct alua_dh_data *h = sdev->handler_data;
 	unsigned int optimize = 0, argc;
 	const char *p = params;
 	int result = SCSI_DH_OK;
@@ -729,11 +740,11 @@
 static int alua_activate(struct scsi_device *sdev,
 			activate_complete fn, void *data)
 {
-	struct alua_dh_data *h = get_alua_data(sdev);
+	struct alua_dh_data *h = sdev->handler_data;
 	int err = SCSI_DH_OK;
 	int stpg = 0;
 
-	err = alua_rtpg(sdev, h);
+	err = alua_rtpg(sdev, h, 1);
 	if (err != SCSI_DH_OK)
 		goto out;
 
@@ -787,7 +798,7 @@
  */
 static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
 {
-	struct alua_dh_data *h = get_alua_data(sdev);
+	struct alua_dh_data *h = sdev->handler_data;
 	int ret = BLKPREP_OK;
 
 	if (h->state == TPGS_STATE_TRANSITIONING)
@@ -802,47 +813,18 @@
 
 }
 
-static bool alua_match(struct scsi_device *sdev)
-{
-	return (scsi_device_tpgs(sdev) != 0);
-}
-
-static int alua_bus_attach(struct scsi_device *sdev);
-static void alua_bus_detach(struct scsi_device *sdev);
-
-static struct scsi_device_handler alua_dh = {
-	.name = ALUA_DH_NAME,
-	.module = THIS_MODULE,
-	.attach = alua_bus_attach,
-	.detach = alua_bus_detach,
-	.prep_fn = alua_prep_fn,
-	.check_sense = alua_check_sense,
-	.activate = alua_activate,
-	.set_params = alua_set_params,
-	.match = alua_match,
-};
-
 /*
  * alua_bus_attach - Attach device handler
  * @sdev: device to be attached to
  */
 static int alua_bus_attach(struct scsi_device *sdev)
 {
-	struct scsi_dh_data *scsi_dh_data;
 	struct alua_dh_data *h;
-	unsigned long flags;
-	int err = SCSI_DH_OK;
+	int err;
 
-	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
-			       + sizeof(*h) , GFP_KERNEL);
-	if (!scsi_dh_data) {
-		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
-			    ALUA_DH_NAME);
+	h = kzalloc(sizeof(*h) , GFP_KERNEL);
+	if (!h)
 		return -ENOMEM;
-	}
-
-	scsi_dh_data->scsi_dh = &alua_dh;
-	h = (struct alua_dh_data *) scsi_dh_data->buf;
 	h->tpgs = TPGS_MODE_UNINITIALIZED;
 	h->state = TPGS_STATE_OPTIMIZED;
 	h->group_id = -1;
@@ -852,22 +834,13 @@
 	h->sdev = sdev;
 
 	err = alua_initialize(sdev, h);
-	if ((err != SCSI_DH_OK) && (err != SCSI_DH_DEV_OFFLINED))
-		goto failed;
-
-	if (!try_module_get(THIS_MODULE))
+	if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED)
 		goto failed;
 
-	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-	sdev->scsi_dh_data = scsi_dh_data;
-	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-	sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);
-
+	sdev->handler_data = h;
 	return 0;
-
 failed:
-	kfree(scsi_dh_data);
-	sdev_printk(KERN_ERR, sdev, "%s: not attached\n", ALUA_DH_NAME);
+	kfree(h);
 	return -EINVAL;
 }
 
@@ -877,23 +850,25 @@
  */
 static void alua_bus_detach(struct scsi_device *sdev)
 {
-	struct scsi_dh_data *scsi_dh_data;
-	struct alua_dh_data *h;
-	unsigned long flags;
+	struct alua_dh_data *h = sdev->handler_data;
 
-	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-	scsi_dh_data = sdev->scsi_dh_data;
-	sdev->scsi_dh_data = NULL;
-	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
-	h = (struct alua_dh_data *) scsi_dh_data->buf;
 	if (h->buff && h->inq != h->buff)
 		kfree(h->buff);
-	kfree(scsi_dh_data);
-	module_put(THIS_MODULE);
-	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", ALUA_DH_NAME);
+	sdev->handler_data = NULL;
+	kfree(h);
 }
 
+static struct scsi_device_handler alua_dh = {
+	.name = ALUA_DH_NAME,
+	.module = THIS_MODULE,
+	.attach = alua_bus_attach,
+	.detach = alua_bus_detach,
+	.prep_fn = alua_prep_fn,
+	.check_sense = alua_check_sense,
+	.activate = alua_activate,
+	.set_params = alua_set_params,
+};
+
 static int __init alua_init(void)
 {
 	int r;