--- zzzz-none-000/linux-3.10.107/drivers/scsi/mpt3sas/mpt3sas_base.h 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/scsi/mpt3sas/mpt3sas_base.h 2021-02-04 17:41:59.000000000 +0000 @@ -3,8 +3,9 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h - * Copyright (C) 2012 LSI Corporation - * (mailto:DL-MPTFusionLinux@lsi.com) + * Copyright (C) 2012-2014 LSI Corporation + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -62,31 +63,47 @@ #include #include #include +#include +#include #include "mpt3sas_debug.h" #include "mpt3sas_trigger_diag.h" /* driver versioning info */ #define MPT3SAS_DRIVER_NAME "mpt3sas" -#define MPT3SAS_AUTHOR "LSI Corporation " +#define MPT3SAS_AUTHOR "Avago Technologies " #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "01.100.01.00" -#define MPT3SAS_MAJOR_VERSION 1 -#define MPT3SAS_MINOR_VERSION 100 -#define MPT3SAS_BUILD_VERSION 1 +#define MPT3SAS_DRIVER_VERSION "09.102.00.00" +#define MPT3SAS_MAJOR_VERSION 9 +#define MPT3SAS_MINOR_VERSION 102 +#define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 +#define MPT2SAS_DRIVER_NAME "mpt2sas" +#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" +#define MPT2SAS_DRIVER_VERSION "20.102.00.00" +#define MPT2SAS_MAJOR_VERSION 20 +#define MPT2SAS_MINOR_VERSION 102 +#define MPT2SAS_BUILD_VERSION 0 +#define MPT2SAS_RELEASE_VERSION 00 + /* * Set MPT3SAS_SG_DEPTH value based on user input. */ -#define MPT3SAS_MAX_PHYS_SEGMENTS SCSI_MAX_SG_SEGMENTS -#define MPT3SAS_MIN_PHYS_SEGMENTS 16 +#define MPT_MAX_PHYS_SEGMENTS SCSI_MAX_SG_SEGMENTS +#define MPT_MIN_PHYS_SEGMENTS 16 + #ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE #define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE #else -#define MPT3SAS_SG_DEPTH MPT3SAS_MAX_PHYS_SEGMENTS +#define MPT3SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS #endif +#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE +#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE +#else +#define MPT2SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS +#endif /* * Generic Defines @@ -123,6 +140,16 @@ #define MPT3SAS_FMT "%s: " /* + * WarpDrive Specific Log codes + */ + +#define MPT2_WARPDRIVE_LOGENTRY (0x8002) +#define MPT2_WARPDRIVE_LC_SSDT (0x41) +#define MPT2_WARPDRIVE_LC_SSDLW (0x43) +#define MPT2_WARPDRIVE_LC_SSDLF (0x44) +#define MPT2_WARPDRIVE_LC_BRMF (0x4D) + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 @@ -130,7 +157,108 @@ #define MPT_TARGET_FLAGS_DELETED 0x04 #define MPT_TARGET_FASTPATH_IO 0x08 +#define SAS2_PCI_DEVICE_B0_REVISION (0x01) +#define SAS3_PCI_DEVICE_C0_REVISION (0x02) + +/* + * Intel HBA branding + */ +#define MPT2SAS_INTEL_RMS25JB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25JB080" +#define MPT2SAS_INTEL_RMS25JB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25JB040" +#define MPT2SAS_INTEL_RMS25KB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25KB080" +#define MPT2SAS_INTEL_RMS25KB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25KB040" +#define MPT2SAS_INTEL_RMS25LB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB040" +#define MPT2SAS_INTEL_RMS25LB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB080" +#define MPT2SAS_INTEL_RMS2LL080_BRANDING \ + "Intel Integrated RAID Module RMS2LL080" +#define MPT2SAS_INTEL_RMS2LL040_BRANDING \ + "Intel Integrated RAID Module RMS2LL040" +#define MPT2SAS_INTEL_RS25GB008_BRANDING \ + "Intel(R) RAID Controller RS25GB008" +#define MPT2SAS_INTEL_SSD910_BRANDING \ + "Intel(R) SSD 910 Series" + +#define MPT3SAS_INTEL_RMS3JC080_BRANDING \ + "Intel(R) Integrated RAID Module RMS3JC080" +#define MPT3SAS_INTEL_RS3GC008_BRANDING \ + "Intel(R) RAID Controller RS3GC008" +#define MPT3SAS_INTEL_RS3FC044_BRANDING \ + "Intel(R) RAID Controller RS3FC044" +#define MPT3SAS_INTEL_RS3UC080_BRANDING \ + "Intel(R) RAID Controller RS3UC080" + +/* + * Intel HBA SSDIDs + */ +#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516 +#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517 +#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518 +#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519 +#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A +#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B +#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E +#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F +#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000 +#define MPT2SAS_INTEL_SSD910_SSDID 0x3700 + +#define MPT3SAS_INTEL_RMS3JC080_SSDID 0x3521 +#define MPT3SAS_INTEL_RS3GC008_SSDID 0x3522 +#define MPT3SAS_INTEL_RS3FC044_SSDID 0x3523 +#define MPT3SAS_INTEL_RS3UC080_SSDID 0x3524 +/* + * Dell HBA branding + */ +#define MPT2SAS_DELL_BRANDING_SIZE 32 + +#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" +#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" +#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" +#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" +#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" + +#define MPT3SAS_DELL_12G_HBA_BRANDING \ + "Dell 12Gbps HBA" + +/* + * Dell HBA SSDIDs + */ +#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C +#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E +#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 +#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 +#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 + +#define MPT3SAS_DELL_12G_HBA_SSDID 0x1F46 + +/* + * Cisco HBA branding + */ +#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING \ + "Cisco 9300-8E 12G SAS HBA" +#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING \ + "Cisco 9300-8i 12G SAS HBA" +#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING \ + "Cisco 12G Modular SAS Pass through Controller" +#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING \ + "UCS C3X60 12G SAS Pass through Controller" +/* + * Cisco HBA SSSDIDs + */ +#define MPT3SAS_CISCO_12G_8E_HBA_SSDID 0x14C +#define MPT3SAS_CISCO_12G_8I_HBA_SSDID 0x154 +#define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID 0x155 +#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID 0x156 /* * status bits for ioc->diag_buffer_status @@ -139,6 +267,38 @@ #define MPT3_DIAG_BUFFER_IS_RELEASED (0x02) #define MPT3_DIAG_BUFFER_IS_DIAG_RESET (0x04) +/* + * HP HBA branding + */ +#define MPT2SAS_HP_3PAR_SSVID 0x1590 + +#define MPT2SAS_HP_2_4_INTERNAL_BRANDING \ + "HP H220 Host Bus Adapter" +#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING \ + "HP H221 Host Bus Adapter" +#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING \ + "HP H222 Host Bus Adapter" +#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING \ + "HP H220i Host Bus Adapter" +#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING \ + "HP H210i Host Bus Adapter" + +/* + * HO HBA SSDIDs + */ +#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041 +#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042 +#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043 +#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044 +#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046 + +/* + * Combined Reply Queue constants, + * There are twelve Supplemental Reply Post Host Index Registers + * and each register is at offset 0x10 bytes from the previous one. + */ +#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT 12 +#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10) /* OEM Identifiers */ #define MFG10_OEM_ID_INVALID (0x00000000) @@ -154,6 +314,8 @@ #define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008) #define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010) +#define VIRTUAL_IO_FAILED_RETRY (0x32010081) + /* OEM Specific Flags will come from OEM specific header files */ struct Mpi2ManufacturingPage10_t { MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ @@ -185,20 +347,24 @@ * struct MPT3SAS_TARGET - starget private hostdata * @starget: starget object * @sas_address: target sas address + * @raid_device: raid_device pointer to access volume data * @handle: device handle * @num_luns: number luns * @flags: MPT_TARGET_FLAGS_XXX flags * @deleted: target flaged for deletion * @tm_busy: target is busy with TM request. + * @sdev: The sas_device associated with this target */ struct MPT3SAS_TARGET { struct scsi_target *starget; u64 sas_address; + struct _raid_device *raid_device; u16 handle; int num_luns; u32 flags; u8 deleted; u8 tm_busy; + struct _sas_device *sdev; }; @@ -208,6 +374,11 @@ #define MPT_DEVICE_FLAGS_INIT 0x01 #define MPT_DEVICE_TLR_ON 0x02 +#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003) +#define MFG_PAGE10_HIDE_ALL_DISKS (0x00) +#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01) +#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02) + /** * struct MPT3SAS_DEVICE - sdev private hostdata * @sas_target: starget private hostdata @@ -284,8 +455,11 @@ * @channel: target channel * @slot: number number * @phy: phy identifier provided in sas device page 0 - * @fast_path: fast path feature enable bit * @responding: used in _scsih_sas_device_mark_responding + * @fast_path: fast path feature enable bit + * @pfa_led_on: flag for PFA LED status + * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add() + * addition routine. */ struct _sas_device { struct list_head list; @@ -305,7 +479,27 @@ u8 phy; u8 responding; u8 fast_path; -}; + u8 pfa_led_on; + u8 pend_sas_rphy_add; + u8 enclosure_level; + u8 connector_name[4]; + struct kref refcount; +}; + +static inline void sas_device_get(struct _sas_device *s) +{ + kref_get(&s->refcount); +} + +static inline void sas_device_free(struct kref *r) +{ + kfree(container_of(r, struct _sas_device, refcount)); +} + +static inline void sas_device_put(struct _sas_device *s) +{ + kref_put(&s->refcount, sas_device_free); +} /** * struct _raid_device - raid volume link list @@ -314,6 +508,7 @@ * @sdev: scsi device struct (volumes are single lun) * @wwid: unique identifier for the volume * @handle: device handle + * @block_size: Block size of the volume * @id: target id * @channel: target channel * @volume_type: the raid level @@ -321,6 +516,13 @@ * @num_pds: number of hidden raid components * @responding: used in _scsih_raid_device_mark_responding * @percent_complete: resync percent complete + * @direct_io_enabled: Whether direct io to PDs are allowed or not + * @stripe_exponent: X where 2powX is the stripe sz in blocks + * @block_exponent: X where 2powX is the block sz in bytes + * @max_lba: Maximum number of LBA in the volume + * @stripe_sz: Stripe Size of the volume + * @device_info: Device info of the volume member disk + * @pd_handle: Array of handles of the physical drives for direct I/O in le16 */ #define MPT_MAX_WARPDRIVE_PDS 8 struct _raid_device { @@ -329,13 +531,20 @@ struct scsi_device *sdev; u64 wwid; u16 handle; + u16 block_sz; int id; int channel; u8 volume_type; u8 num_pds; u8 responding; u8 percent_complete; + u8 direct_io_enabled; + u8 stripe_exponent; + u8 block_exponent; + u64 max_lba; + u32 stripe_sz; u32 device_info; + u16 pd_handle[MPT_MAX_WARPDRIVE_PDS]; }; /** @@ -444,14 +653,18 @@ * @smid: system message id * @scmd: scsi request pointer * @cb_idx: callback index + * @direct_io: To indicate whether I/O is direct (WARPDRIVE) * @tracker_list: list of free request (ioc->free_list) + * @msix_io: IO's msix */ struct scsiio_tracker { u16 smid; struct scsi_cmnd *scmd; u8 cb_idx; + u8 direct_io; struct list_head chain_list; struct list_head tracker_list; + u16 msix_io; }; /** @@ -497,6 +710,7 @@ Mpi2ReplyDescriptorsUnion_t *reply_post_free; char name[MPT_NAME_LENGTH]; atomic_t busy; + cpumask_var_t affinity_hint; struct list_head list; }; @@ -560,6 +774,11 @@ u16 MaxPostedCmdBuffers; }; +struct reply_post_struct { + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + dma_addr_t reply_post_free_dma; +}; + /** * enum mutex_type - task management mutex type * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it @@ -588,6 +807,7 @@ * @ir_firmware: IR firmware present * @bars: bitmask of BAR's that must be configured * @mask_interrupts: ignore interrupt + * @dma_mask: used to set the consistent dma mask * @fault_reset_work_q_name: fw fault work queue * @fault_reset_work_q: "" * @fault_reset_work: "" @@ -644,6 +864,7 @@ * @ioc_pg8: static ioc page 8 * @iounit_pg0: static iounit page 0 * @iounit_pg1: static iounit page 1 + * @iounit_pg8: static iounit page 8 * @sas_hba: sas host object * @sas_expander_list: expander object list * @sas_node_lock: @@ -703,13 +924,24 @@ * @reply_free_dma_pool: * @reply_free_host_index: tail index in pool to insert free replys * @reply_post_queue_depth: reply post queue depth - * @reply_post_free: pool for reply post (64bit descriptor) - * @reply_post_free_dma: + * @reply_post_struct: struct for reply_post_free physical & virt address + * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init + * @rdpq_array_enable: rdpq_array support is enabled in the driver + * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag + * is assigned only ones * @reply_queue_count: number of reply queue's * @reply_queue_list: link list contaning the reply queue info - * @reply_post_host_index: head index in the pool where FW completes IO + * @msix96_vector: 96 MSI-X vector support + * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue * @delayed_tr_list: target reset link list * @delayed_tr_volume_list: volume target reset link list + * @temp_sensors_count: flag to carry the number of temperature sensors + * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and + * pci resource handling. PCI resource freeing will lead to free + * vital hardware/memory resource, which might be in use by cli/sysfs + * path functions resulting in Null pointer reference followed by kernel + * crash. To avoid the above race condition we use mutex syncrhonization + * which ensures the syncrhonization between cli/sysfs_show path. */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -717,6 +949,7 @@ u8 id; int cpu_count; char name[MPT_NAME_LENGTH]; + char driver_name[MPT_NAME_LENGTH]; char tmp_string[MPT_STRING_LENGTH]; struct pci_dev *pdev; Mpi2SystemInterfaceRegs_t __iomem *chip; @@ -726,6 +959,7 @@ u8 ir_firmware; int bars; u8 mask_interrupts; + int dma_mask; /* fw fault handler */ char fault_reset_work_q_name[20]; @@ -762,8 +996,10 @@ u16 msix_vector_count; u8 *cpu_msix_table; u16 cpu_msix_table_sz; + resource_size_t __iomem **reply_post_host_index; u32 ioc_reset_count; MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; + u32 non_operational_loop; /* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -791,8 +1027,8 @@ MPT_BUILD_SG_SCMD build_sg_scmd; MPT_BUILD_SG build_sg; MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge; - u8 mpi25; u16 sge_size_ieee; + u16 hba_mpi_version_belonged; /* function ptr for MPI sg elements only */ MPT_BUILD_SG build_sg_mpi; @@ -815,6 +1051,7 @@ Mpi2IOCPage8_t ioc_pg8; Mpi2IOUnitPage0_t iounit_pg0; Mpi2IOUnitPage1_t iounit_pg1; + Mpi2IOUnitPage8_t iounit_pg8; struct _boot_device req_boot_device; struct _boot_device req_alt_boot_device; @@ -905,14 +1142,22 @@ /* reply post queue */ u16 reply_post_queue_depth; - Mpi2ReplyDescriptorsUnion_t *reply_post_free; - dma_addr_t reply_post_free_dma; + struct reply_post_struct *reply_post; + u8 rdpq_array_capable; + u8 rdpq_array_enable; + u8 rdpq_array_enable_assigned; struct dma_pool *reply_post_free_dma_pool; u8 reply_queue_count; struct list_head reply_queue_list; + u8 msix96_vector; + /* reply post register index */ + resource_size_t **replyPostRegisterIndex; + struct list_head delayed_tr_list; struct list_head delayed_tr_volume_list; + u8 temp_sensors_count; + struct mutex pci_access_mutex; /* diag buffer support */ u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; @@ -924,6 +1169,10 @@ u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; u32 ring_buffer_offset; u32 ring_buffer_sz; + u8 is_warpdrive; + u8 hide_ir_msg; + u8 mfg_pg10_hide_flag; + u8 hide_drives; spinlock_t diag_trigger_lock; u8 diag_trigger_active; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; @@ -938,6 +1187,19 @@ /* base shared API */ extern struct list_head mpt3sas_ioc_list; +extern char driver_name[MPT_NAME_LENGTH]; +/* spinlock on list operations over IOCs + * Case: when multiple warpdrive cards(IOCs) are in use + * Each IOC will added to the ioc list structure on initialization. + * Watchdog threads run at regular intervals to check IOC for any + * fault conditions which will trigger the dead_ioc thread to + * deallocate pci resource, resulting deleting the IOC netry from list, + * this deletion need to protected by spinlock to enusre that + * ioc removal is syncrhonized, if not synchronized it might lead to + * list_del corruption as the ioc list is traversed in cli path. + */ +extern spinlock_t gioc_lock; + void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc); @@ -965,7 +1227,8 @@ u16 handle); void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle); -void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, + u16 smid, u16 msix_task); void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid); void mpt3sas_base_initialize_callback_handler(void); u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func); @@ -1005,7 +1268,7 @@ int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel, uint id, uint lun, u8 type, u16 smid_task, - ulong timeout, unsigned long serial_number, enum mutex_type m_type); + ulong timeout, enum mutex_type m_type); void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address); @@ -1016,10 +1279,14 @@ struct MPT3SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address( struct MPT3SAS_ADAPTER *ioc, u64 sas_address); -struct _sas_device *mpt3sas_scsih_sas_device_find_by_sas_address( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +struct _sas_device *mpt3sas_get_sdev_by_addr( + struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +struct _sas_device *__mpt3sas_get_sdev_by_addr( + struct MPT3SAS_ADAPTER *ioc, u64 sas_address); void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc); +struct _raid_device * +mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); /* config shared API */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, @@ -1059,8 +1326,12 @@ u16 sz); int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz); int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage8_t *config_page); int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); @@ -1101,8 +1372,8 @@ /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; extern struct device_attribute *mpt3sas_dev_attrs[]; -void mpt3sas_ctl_init(void); -void mpt3sas_ctl_exit(void); +void mpt3sas_ctl_init(ushort hbas_to_enumerate); +void mpt3sas_ctl_exit(ushort hbas_to_enumerate); u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase); @@ -1117,6 +1388,7 @@ u8 *issue_reset); /* transport shared API */ +extern struct scsi_transport_template *mpt3sas_transport_template; u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, @@ -1148,4 +1420,18 @@ u8 asc, u8 ascq); void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo); + +/* warpdrive APIs */ +u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device); +u8 +mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void +mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); +void +mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, + u16 smid); + #endif /* MPT3SAS_BASE_H_INCLUDED */