--- zzzz-none-000/linux-3.10.107/drivers/scsi/nsp32.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/scsi/nsp32.c	2021-02-04 17:41:59.000000000 +0000
@@ -274,7 +274,6 @@
 	.can_queue			= 1,
 	.sg_tablesize			= NSP32_SG_SIZE,
 	.max_sectors			= 128,
-	.cmd_per_lun			= 1,
 	.this_id			= NSP32_HOST_SCSIID,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.eh_abort_handler       	= nsp32_eh_abort,
@@ -915,7 +914,7 @@
 	int ret;
 
 	nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
-		  "enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x "
+		  "enter. target: 0x%x LUN: 0x%llx cmnd: 0x%x cmndlen: 0x%x "
 		  "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
 		  SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
 		  scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
@@ -930,7 +929,7 @@
 
 	/* check target ID is not same as this initiator ID */
 	if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
-		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
+		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
 		SCpnt->result = DID_BAD_TARGET << 16;
 		done(SCpnt);
 		return 0;
@@ -1441,8 +1440,6 @@
 	return IRQ_RETVAL(handled);
 }
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
 
 static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
@@ -1458,64 +1455,63 @@
 	data = (nsp32_hw_data *)host->hostdata;
 	base = host->io_port;
 
-	SPRINTF("NinjaSCSI-32 status\n\n");
-	SPRINTF("Driver version:        %s, $Revision: 1.33 $\n", nsp32_release_version);
-	SPRINTF("SCSI host No.:         %d\n",		hostno);
-	SPRINTF("IRQ:                   %d\n",		host->irq);
-	SPRINTF("IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
-	SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n",	host->base, host->base + data->MmioLength - 1);
-	SPRINTF("sg_tablesize:          %d\n",		host->sg_tablesize);
-	SPRINTF("Chip revision:         0x%x\n",       	(nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
+	seq_puts(m, "NinjaSCSI-32 status\n\n");
+	seq_printf(m, "Driver version:        %s, $Revision: 1.33 $\n", nsp32_release_version);
+	seq_printf(m, "SCSI host No.:         %d\n",		hostno);
+	seq_printf(m, "IRQ:                   %d\n",		host->irq);
+	seq_printf(m, "IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+	seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n",	host->base, host->base + data->MmioLength - 1);
+	seq_printf(m, "sg_tablesize:          %d\n",		host->sg_tablesize);
+	seq_printf(m, "Chip revision:         0x%x\n",		(nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
 
 	mode_reg = nsp32_index_read1(base, CHIP_MODE);
 	model    = data->pci_devid->driver_data;
 
 #ifdef CONFIG_PM
-	SPRINTF("Power Management:      %s\n",          (mode_reg & OPTF) ? "yes" : "no");
+	seq_printf(m, "Power Management:      %s\n",          (mode_reg & OPTF) ? "yes" : "no");
 #endif
-	SPRINTF("OEM:                   %ld, %s\n",     (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
+	seq_printf(m, "OEM:                   %ld, %s\n",     (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
 
 	spin_lock_irqsave(&(data->Lock), flags);
-	SPRINTF("CurrentSC:             0x%p\n\n",      data->CurrentSC);
+	seq_printf(m, "CurrentSC:             0x%p\n\n",      data->CurrentSC);
 	spin_unlock_irqrestore(&(data->Lock), flags);
 
 
-	SPRINTF("SDTR status\n");
+	seq_puts(m, "SDTR status\n");
 	for (id = 0; id < ARRAY_SIZE(data->target); id++) {
 
-                SPRINTF("id %d: ", id);
+		seq_printf(m, "id %d: ", id);
 
 		if (id == host->this_id) {
-			SPRINTF("----- NinjaSCSI-32 host adapter\n");
+			seq_puts(m, "----- NinjaSCSI-32 host adapter\n");
 			continue;
 		}
 
 		if (data->target[id].sync_flag == SDTR_DONE) {
 			if (data->target[id].period == 0            &&
 			    data->target[id].offset == ASYNC_OFFSET ) {
-				SPRINTF("async");
+				seq_puts(m, "async");
 			} else {
-				SPRINTF(" sync");
+				seq_puts(m, " sync");
 			}
 		} else {
-			SPRINTF(" none");
+			seq_puts(m, " none");
 		}
 
 		if (data->target[id].period != 0) {
 
 			speed = 1000000 / (data->target[id].period * 4);
 
-			SPRINTF(" transfer %d.%dMB/s, offset %d",
+			seq_printf(m, " transfer %d.%dMB/s, offset %d",
 				speed / 1000,
 				speed % 1000,
 				data->target[id].offset
 				);
 		}
-		SPRINTF("\n");
+		seq_putc(m, '\n');
 	}
 	return 0;
 }
-#undef SPRINTF