--- zzzz-none-000/linux-3.10.107/drivers/scsi/qla4xxx/ql4_bsg.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/scsi/qla4xxx/ql4_bsg.c	2021-02-04 17:41:59.000000000 +0000
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c) 2011 QLogic Corporation
+ * Copyright (c) 2011-2013 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -446,6 +446,363 @@
 	return rval;
 }
 
+static void ql4xxx_execute_diag_cmd(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint8_t *rsp_ptr = NULL;
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status = QLA_ERROR;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_diag_mem_test;
+	}
+
+	bsg_reply->reply_payload_rcv_len = 0;
+	memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1],
+	       sizeof(uint32_t) * MBOX_REG_COUNT);
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2],
+			  mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6],
+			  mbox_cmd[7]));
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
+					 &mbox_sts[0]);
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2],
+			  mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6],
+			  mbox_sts[7]));
+
+	if (status == QLA_SUCCESS)
+		bsg_reply->result = DID_OK << 16;
+	else
+		bsg_reply->result = DID_ERROR << 16;
+
+	/* Send mbox_sts to application */
+	bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts);
+	rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply);
+	memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts));
+
+exit_diag_mem_test:
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: bsg_reply->result = x%x, status = %s\n",
+			  __func__, bsg_reply->result, STATUS(status)));
+
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+}
+
+static int qla4_83xx_wait_for_loopback_config_comp(struct scsi_qla_host *ha,
+						   int wait_for_link)
+{
+	int status = QLA_SUCCESS;
+
+	if (!wait_for_completion_timeout(&ha->idc_comp, (IDC_COMP_TOV * HZ))) {
+		ql4_printk(KERN_INFO, ha, "%s: IDC Complete notification not received, Waiting for another %d timeout",
+			   __func__, ha->idc_extend_tmo);
+		if (ha->idc_extend_tmo) {
+			if (!wait_for_completion_timeout(&ha->idc_comp,
+						(ha->idc_extend_tmo * HZ))) {
+				ha->notify_idc_comp = 0;
+				ha->notify_link_up_comp = 0;
+				ql4_printk(KERN_WARNING, ha, "%s: Aborting: IDC Complete notification not received",
+					   __func__);
+				status = QLA_ERROR;
+				goto exit_wait;
+			} else {
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+						  "%s: IDC Complete notification received\n",
+						  __func__));
+			}
+		}
+	} else {
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "%s: IDC Complete notification received\n",
+				  __func__));
+	}
+	ha->notify_idc_comp = 0;
+
+	if (wait_for_link) {
+		if (!wait_for_completion_timeout(&ha->link_up_comp,
+						 (IDC_COMP_TOV * HZ))) {
+			ha->notify_link_up_comp = 0;
+			ql4_printk(KERN_WARNING, ha, "%s: Aborting: LINK UP notification not received",
+				   __func__);
+			status = QLA_ERROR;
+			goto exit_wait;
+		} else {
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+					  "%s: LINK UP notification received\n",
+					  __func__));
+		}
+		ha->notify_link_up_comp = 0;
+	}
+
+exit_wait:
+	return status;
+}
+
+static int qla4_83xx_pre_loopback_config(struct scsi_qla_host *ha,
+					 uint32_t *mbox_cmd)
+{
+	uint32_t config = 0;
+	int status = QLA_SUCCESS;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	status = qla4_83xx_get_port_config(ha, &config);
+	if (status != QLA_SUCCESS)
+		goto exit_pre_loopback_config;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n",
+			  __func__, config));
+
+	if ((config & ENABLE_INTERNAL_LOOPBACK) ||
+	    (config & ENABLE_EXTERNAL_LOOPBACK)) {
+		ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid request\n",
+			   __func__);
+		goto exit_pre_loopback_config;
+	}
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK)
+		config |= ENABLE_INTERNAL_LOOPBACK;
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK)
+		config |= ENABLE_EXTERNAL_LOOPBACK;
+
+	config &= ~ENABLE_DCBX;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n",
+			  __func__, config));
+
+	ha->notify_idc_comp = 1;
+	ha->notify_link_up_comp = 1;
+
+	/* get the link state */
+	qla4xxx_get_firmware_state(ha);
+
+	status = qla4_83xx_set_port_config(ha, &config);
+	if (status != QLA_SUCCESS) {
+		ha->notify_idc_comp = 0;
+		ha->notify_link_up_comp = 0;
+		goto exit_pre_loopback_config;
+	}
+exit_pre_loopback_config:
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
+			  STATUS(status)));
+	return status;
+}
+
+static int qla4_83xx_post_loopback_config(struct scsi_qla_host *ha,
+					  uint32_t *mbox_cmd)
+{
+	int status = QLA_SUCCESS;
+	uint32_t config = 0;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	status = qla4_83xx_get_port_config(ha, &config);
+	if (status != QLA_SUCCESS)
+		goto exit_post_loopback_config;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__,
+			  config));
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK)
+		config &= ~ENABLE_INTERNAL_LOOPBACK;
+	else if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK)
+		config &= ~ENABLE_EXTERNAL_LOOPBACK;
+
+	config |= ENABLE_DCBX;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: Restore default port config=%08X\n", __func__,
+			  config));
+
+	ha->notify_idc_comp = 1;
+	if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP)
+		ha->notify_link_up_comp = 1;
+
+	status = qla4_83xx_set_port_config(ha, &config);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "%s: Scheduling adapter reset\n",
+			   __func__);
+		set_bit(DPC_RESET_HA, &ha->dpc_flags);
+		clear_bit(AF_LOOPBACK, &ha->flags);
+		goto exit_post_loopback_config;
+	}
+
+exit_post_loopback_config:
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
+			  STATUS(status)));
+	return status;
+}
+
+static void qla4xxx_execute_diag_loopback_cmd(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint8_t *rsp_ptr = NULL;
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int wait_for_link = 1;
+	int status = QLA_ERROR;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (test_bit(AF_LOOPBACK, &ha->flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Loopback Diagnostics already in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_loopback_cmd;
+	}
+
+	if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_loopback_cmd;
+	}
+
+	memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1],
+	       sizeof(uint32_t) * MBOX_REG_COUNT);
+
+	if (is_qla8032(ha) || is_qla8042(ha)) {
+		status = qla4_83xx_pre_loopback_config(ha, mbox_cmd);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_ERROR << 16;
+			goto exit_loopback_cmd;
+		}
+
+		status = qla4_83xx_wait_for_loopback_config_comp(ha,
+								 wait_for_link);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_TIME_OUT << 16;
+			goto restore;
+		}
+	}
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2],
+			  mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6],
+			  mbox_cmd[7]));
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
+				&mbox_sts[0]);
+
+	if (status == QLA_SUCCESS)
+		bsg_reply->result = DID_OK << 16;
+	else
+		bsg_reply->result = DID_ERROR << 16;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2],
+			  mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6],
+			  mbox_sts[7]));
+
+	/* Send mbox_sts to application */
+	bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts);
+	rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply);
+	memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts));
+restore:
+	if (is_qla8032(ha) || is_qla8042(ha)) {
+		status = qla4_83xx_post_loopback_config(ha, mbox_cmd);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_ERROR << 16;
+			goto exit_loopback_cmd;
+		}
+
+		/* for pre_loopback_config() wait for LINK UP only
+		 * if PHY LINK is UP */
+		if (!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP))
+			wait_for_link = 0;
+
+		status = qla4_83xx_wait_for_loopback_config_comp(ha,
+								 wait_for_link);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_TIME_OUT << 16;
+			goto exit_loopback_cmd;
+		}
+	}
+exit_loopback_cmd:
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: bsg_reply->result = x%x, status = %s\n",
+			  __func__, bsg_reply->result, STATUS(status)));
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+}
+
+static int qla4xxx_execute_diag_test(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	uint32_t diag_cmd;
+	int rval = -EINVAL;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	diag_cmd = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	if (diag_cmd == MBOX_CMD_DIAG_TEST) {
+		switch (bsg_req->rqst_data.h_vendor.vendor_cmd[2]) {
+		case QL_DIAG_CMD_TEST_DDR_SIZE:
+		case QL_DIAG_CMD_TEST_DDR_RW:
+		case QL_DIAG_CMD_TEST_ONCHIP_MEM_RW:
+		case QL_DIAG_CMD_TEST_NVRAM:
+		case QL_DIAG_CMD_TEST_FLASH_ROM:
+		case QL_DIAG_CMD_TEST_DMA_XFER:
+		case QL_DIAG_CMD_SELF_DDR_RW:
+		case QL_DIAG_CMD_SELF_ONCHIP_MEM_RW:
+			/* Execute diag test for adapter RAM/FLASH */
+			ql4xxx_execute_diag_cmd(bsg_job);
+			/* Always return success as we want to sent bsg_reply
+			 * to Application */
+			rval = QLA_SUCCESS;
+			break;
+
+		case QL_DIAG_CMD_TEST_INT_LOOPBACK:
+		case QL_DIAG_CMD_TEST_EXT_LOOPBACK:
+			/* Execute diag test for Network */
+			qla4xxx_execute_diag_loopback_cmd(bsg_job);
+			/* Always return success as we want to sent bsg_reply
+			 * to Application */
+			rval = QLA_SUCCESS;
+			break;
+		default:
+			ql4_printk(KERN_ERR, ha, "%s: Invalid diag test: 0x%x\n",
+				   __func__,
+				   bsg_req->rqst_data.h_vendor.vendor_cmd[2]);
+		}
+	} else if ((diag_cmd == MBOX_CMD_SET_LED_CONFIG) ||
+		   (diag_cmd == MBOX_CMD_GET_LED_CONFIG)) {
+		ql4xxx_execute_diag_cmd(bsg_job);
+		rval = QLA_SUCCESS;
+	} else {
+		ql4_printk(KERN_ERR, ha, "%s: Invalid diag cmd: 0x%x\n",
+			   __func__, diag_cmd);
+	}
+
+	return rval;
+}
+
 /**
  * qla4xxx_process_vendor_specific - handle vendor specific bsg request
  * @job: iscsi_bsg_job to handle
@@ -479,6 +836,9 @@
 	case QLISCSI_VND_GET_ACB:
 		return qla4xxx_bsg_get_acb(bsg_job);
 
+	case QLISCSI_VND_DIAG_TEST:
+		return qla4xxx_execute_diag_test(bsg_job);
+
 	default:
 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
 			   "0x%x\n", __func__, bsg_req->msgcode);