--- zzzz-none-000/linux-3.10.107/drivers/scsi/sun3_scsi_vme.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/scsi/sun3_scsi_vme.c 2021-02-04 17:41:59.000000000 +0000 @@ -1,589 +1,3 @@ - /* - * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl) - * - * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net) - * - * VME support added by Sam Creasey - * - * Adapted from sun3_scsi.c -- see there for other headers - * - * TODO: modify this driver to support multiple Sun3 SCSI VME boards - * - */ - -#define AUTOSENSE - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - #define SUN3_SCSI_VME -#undef SUN3_SCSI_DEBUG - -/* dma on! */ -#define REAL_DMA - -#define NDEBUG 0 - -#define NDEBUG_ABORT 0x00100000 -#define NDEBUG_TAGS 0x00200000 -#define NDEBUG_MERGING 0x00400000 - -#include "scsi.h" -#include "initio.h" -#include -#include "sun3_scsi.h" - -extern int sun3_map_test(unsigned long, char *); - -#define USE_WRAPPER -/*#define RESET_BOOT */ -#define DRIVER_SETUP - -/* - * BUG can be used to trigger a strange code-size related hang on 2.1 kernels - */ -#ifdef BUG -#undef RESET_BOOT -#undef DRIVER_SETUP -#endif - -/* #define SUPPORT_TAGS */ - -//#define ENABLE_IRQ() enable_irq( SUN3_VEC_VMESCSI0 ); -#define ENABLE_IRQ() - - -static irqreturn_t scsi_sun3_intr(int irq, void *dummy); -static inline unsigned char sun3scsi_read(int reg); -static inline void sun3scsi_write(int reg, int value); - -static int setup_can_queue = -1; -module_param(setup_can_queue, int, 0); -static int setup_cmd_per_lun = -1; -module_param(setup_cmd_per_lun, int, 0); -static int setup_sg_tablesize = -1; -module_param(setup_sg_tablesize, int, 0); -#ifdef SUPPORT_TAGS -static int setup_use_tagged_queuing = -1; -module_param(setup_use_tagged_queuing, int, 0); -#endif -static int setup_hostid = -1; -module_param(setup_hostid, int, 0); - -static struct scsi_cmnd *sun3_dma_setup_done = NULL; - -#define AFTER_RESET_DELAY (HZ/2) - -/* ms to wait after hitting dma regs */ -#define SUN3_DMA_DELAY 10 - -/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */ -#define SUN3_DVMA_BUFSIZE 0xe000 - -/* minimum number of bytes to do dma on */ -#define SUN3_DMA_MINSIZE 128 - -static volatile unsigned char *sun3_scsi_regp; -static volatile struct sun3_dma_regs *dregs; -#ifdef OLDDMA -static unsigned char *dmabuf = NULL; /* dma memory buffer */ -#endif -static unsigned char *sun3_dma_orig_addr = NULL; -static unsigned long sun3_dma_orig_count = 0; -static int sun3_dma_active = 0; -static unsigned long last_residual = 0; - -/* - * NCR 5380 register access functions - */ - -static inline unsigned char sun3scsi_read(int reg) -{ - return( sun3_scsi_regp[reg] ); -} - -static inline void sun3scsi_write(int reg, int value) -{ - sun3_scsi_regp[reg] = value; -} - -/* - * XXX: status debug - */ -static struct Scsi_Host *default_instance; - -/* - * Function : int sun3scsi_detect(struct scsi_host_template * tpnt) - * - * Purpose : initializes mac NCR5380 driver based on the - * command line / compile time port and irq definitions. - * - * Inputs : tpnt - template for this SCSI adapter. - * - * Returns : 1 if a host adapter was found, 0 if not. - * - */ - -static int __init sun3scsi_detect(struct scsi_host_template * tpnt) -{ - unsigned long ioaddr, irq = 0; - static int called = 0; - struct Scsi_Host *instance; - int i; - unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI, - IOBASE_SUN3_VMESCSI + 0x4000, - 0 }; - unsigned long vecs[3] = { SUN3_VEC_VMESCSI0, - SUN3_VEC_VMESCSI1, - 0 }; - /* check that this machine has an onboard 5380 */ - switch(idprom->id_machtype) { - case SM_SUN3|SM_3_160: - case SM_SUN3|SM_3_260: - break; - - default: - return 0; - } - - if(called) - return 0; - - tpnt->proc_name = "Sun3 5380 VME SCSI"; - - /* setup variables */ - tpnt->can_queue = - (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE; - tpnt->cmd_per_lun = - (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN; - tpnt->sg_tablesize = - (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE; - - if (setup_hostid >= 0) - tpnt->this_id = setup_hostid; - else { - /* use 7 as default */ - tpnt->this_id = 7; - } - - ioaddr = 0; - for(i = 0; addrs[i] != 0; i++) { - unsigned char x; - - ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE, - SUN3_PAGE_TYPE_VME16); - irq = vecs[i]; - sun3_scsi_regp = (unsigned char *)ioaddr; - - dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8); - - if(sun3_map_test((unsigned long)dregs, &x)) { - unsigned short oldcsr; - - oldcsr = dregs->csr; - dregs->csr = 0; - udelay(SUN3_DMA_DELAY); - if(dregs->csr == 0x1400) - break; - - dregs->csr = oldcsr; - } - - iounmap((void *)ioaddr); - ioaddr = 0; - } - - if(!ioaddr) - return 0; - -#ifdef SUPPORT_TAGS - if (setup_use_tagged_queuing < 0) - setup_use_tagged_queuing = USE_TAGGED_QUEUING; -#endif - - instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); - if(instance == NULL) - return 0; - - default_instance = instance; - - instance->io_port = (unsigned long) ioaddr; - instance->irq = irq; - - NCR5380_init(instance, 0); - - instance->n_io_port = 32; - - ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0; - - if (request_irq(instance->irq, scsi_sun3_intr, - 0, "Sun3SCSI-5380VME", instance)) { -#ifndef REAL_DMA - printk("scsi%d: IRQ%d not free, interrupts disabled\n", - instance->host_no, instance->irq); - instance->irq = SCSI_IRQ_NONE; -#else - printk("scsi%d: IRQ%d not free, bailing out\n", - instance->host_no, instance->irq); - return 0; -#endif - } - - printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port); - if (instance->irq == SCSI_IRQ_NONE) - printk ("s disabled"); - else - printk (" %d", instance->irq); - printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", - instance->can_queue, instance->cmd_per_lun, - SUN3SCSI_PUBLIC_RELEASE); - printk("\nscsi%d:", instance->host_no); - NCR5380_print_options(instance); - printk("\n"); - - dregs->csr = 0; - udelay(SUN3_DMA_DELAY); - dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR; - udelay(SUN3_DMA_DELAY); - dregs->fifo_count = 0; - dregs->fifo_count_hi = 0; - dregs->dma_addr_hi = 0; - dregs->dma_addr_lo = 0; - dregs->dma_count_hi = 0; - dregs->dma_count_lo = 0; - - dregs->ivect = VME_DATA24 | (instance->irq & 0xff); - - called = 1; - -#ifdef RESET_BOOT - sun3_scsi_reset_boot(instance); -#endif - - return 1; -} - -int sun3scsi_release (struct Scsi_Host *shpnt) -{ - if (shpnt->irq != SCSI_IRQ_NONE) - free_irq(shpnt->irq, shpnt); - - iounmap((void *)sun3_scsi_regp); - - NCR5380_exit(shpnt); - return 0; -} - -#ifdef RESET_BOOT -/* - * Our 'bus reset on boot' function - */ - -static void sun3_scsi_reset_boot(struct Scsi_Host *instance) -{ - unsigned long end; - - NCR5380_local_declare(); - NCR5380_setup(instance); - - /* - * Do a SCSI reset to clean up the bus during initialization. No - * messing with the queues, interrupts, or locks necessary here. - */ - - printk( "Sun3 SCSI: resetting the SCSI bus..." ); - - /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ -// sun3_disable_irq( IRQ_SUN3_SCSI ); - - /* get in phase */ - NCR5380_write( TARGET_COMMAND_REG, - PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); - - /* assert RST */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); - - /* The min. reset hold time is 25us, so 40us should be enough */ - udelay( 50 ); - - /* reset RST and interrupt */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); - NCR5380_read( RESET_PARITY_INTERRUPT_REG ); - - for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) - barrier(); - - /* switch on SCSI IRQ again */ -// sun3_enable_irq( IRQ_SUN3_SCSI ); - - printk( " done\n" ); -} -#endif - -static const char * sun3scsi_info (struct Scsi_Host *spnt) { - return ""; -} - -// safe bits for the CSR -#define CSR_GOOD 0x060f - -static irqreturn_t scsi_sun3_intr(int irq, void *dummy) -{ - unsigned short csr = dregs->csr; - int handled = 0; - - dregs->csr &= ~CSR_DMA_ENABLE; - - -#ifdef SUN3_SCSI_DEBUG - printk("scsi_intr csr %x\n", csr); -#endif - - if(csr & ~CSR_GOOD) { - if(csr & CSR_DMA_BUSERR) { - printk("scsi%d: bus error in dma\n", default_instance->host_no); -#ifdef SUN3_SCSI_DEBUG - printk("scsi: residual %x count %x addr %p dmaaddr %x\n", - dregs->fifo_count, - dregs->dma_count_lo | (dregs->dma_count_hi << 16), - sun3_dma_orig_addr, - dregs->dma_addr_lo | (dregs->dma_addr_hi << 16)); -#endif - } - - if(csr & CSR_DMA_CONFLICT) { - printk("scsi%d: dma conflict\n", default_instance->host_no); - } - handled = 1; - } - - if(csr & (CSR_SDB_INT | CSR_DMA_INT)) { - NCR5380_intr(irq, dummy); - handled = 1; - } - - return IRQ_RETVAL(handled); -} - -/* - * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; - * reentering NCR5380_print_status seems to have ugly side effects - */ - -/* this doesn't seem to get used at all -- sam */ -#if 0 -void sun3_sun3_debug (void) -{ - unsigned long flags; - NCR5380_local_declare(); - - if (default_instance) { - local_irq_save(flags); - NCR5380_print_status(default_instance); - local_irq_restore(flags); - } -} -#endif - - -/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */ -static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag) -{ - void *addr; - - if(sun3_dma_orig_addr != NULL) - dvma_unmap(sun3_dma_orig_addr); - -// addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf); - addr = (void *)dvma_map_vme((unsigned long) data, count); - - sun3_dma_orig_addr = addr; - sun3_dma_orig_count = count; - -#ifdef SUN3_SCSI_DEBUG - printk("scsi: dma_setup addr %p count %x\n", addr, count); -#endif - -// dregs->fifo_count = 0; -#if 0 - /* reset fifo */ - dregs->csr &= ~CSR_FIFO; - dregs->csr |= CSR_FIFO; -#endif - /* set direction */ - if(write_flag) - dregs->csr |= CSR_SEND; - else - dregs->csr &= ~CSR_SEND; - - /* reset fifo */ -// dregs->csr &= ~CSR_FIFO; -// dregs->csr |= CSR_FIFO; - - dregs->csr |= CSR_PACK_ENABLE; - - dregs->dma_addr_hi = ((unsigned long)addr >> 16); - dregs->dma_addr_lo = ((unsigned long)addr & 0xffff); - - dregs->dma_count_hi = 0; - dregs->dma_count_lo = 0; - dregs->fifo_count_hi = 0; - dregs->fifo_count = 0; - -#ifdef SUN3_SCSI_DEBUG - printk("scsi: dma_setup done csr %x\n", dregs->csr); -#endif - return count; - -} - -static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance) -{ - return last_residual; -} - -static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, - struct scsi_cmnd *cmd, - int write_flag) -{ - if (cmd->request->cmd_type == REQ_TYPE_FS) - return wanted; - else - return 0; -} - -static int sun3scsi_dma_start(unsigned long count, char *data) -{ - - unsigned short csr; - - csr = dregs->csr; -#ifdef SUN3_SCSI_DEBUG - printk("scsi: dma_start data %p count %x csr %x fifo %x\n", data, count, csr, dregs->fifo_count); -#endif - - dregs->dma_count_hi = (sun3_dma_orig_count >> 16); - dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff); - - dregs->fifo_count_hi = (sun3_dma_orig_count >> 16); - dregs->fifo_count = (sun3_dma_orig_count & 0xffff); - -// if(!(csr & CSR_DMA_ENABLE)) -// dregs->csr |= CSR_DMA_ENABLE; - - return 0; -} - -/* clean up after our dma is done */ -static int sun3scsi_dma_finish(int write_flag) -{ - unsigned short fifo; - int ret = 0; - - sun3_dma_active = 0; - - dregs->csr &= ~CSR_DMA_ENABLE; - - fifo = dregs->fifo_count; - if(write_flag) { - if((fifo > 0) && (fifo < sun3_dma_orig_count)) - fifo++; - } - - last_residual = fifo; -#ifdef SUN3_SCSI_DEBUG - printk("scsi: residual %x total %x\n", fifo, sun3_dma_orig_count); -#endif - /* empty bytes from the fifo which didn't make it */ - if((!write_flag) && (dregs->csr & CSR_LEFT)) { - unsigned char *vaddr; - -#ifdef SUN3_SCSI_DEBUG - printk("scsi: got left over bytes\n"); -#endif - - vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr); - - vaddr += (sun3_dma_orig_count - fifo); - vaddr--; - - switch(dregs->csr & CSR_LEFT) { - case CSR_LEFT_3: - *vaddr = (dregs->bpack_lo & 0xff00) >> 8; - vaddr--; - - case CSR_LEFT_2: - *vaddr = (dregs->bpack_hi & 0x00ff); - vaddr--; - - case CSR_LEFT_1: - *vaddr = (dregs->bpack_hi & 0xff00) >> 8; - break; - } - - - } - - dvma_unmap(sun3_dma_orig_addr); - sun3_dma_orig_addr = NULL; - - dregs->dma_addr_hi = 0; - dregs->dma_addr_lo = 0; - dregs->dma_count_hi = 0; - dregs->dma_count_lo = 0; - - dregs->fifo_count = 0; - dregs->fifo_count_hi = 0; - - dregs->csr &= ~CSR_SEND; - -// dregs->csr |= CSR_DMA_ENABLE; - -#if 0 - /* reset fifo */ - dregs->csr &= ~CSR_FIFO; - dregs->csr |= CSR_FIFO; -#endif - sun3_dma_setup_done = NULL; - - return ret; - -} - -#include "sun3_NCR5380.c" - -static struct scsi_host_template driver_template = { - .name = SUN3_SCSI_NAME, - .detect = sun3scsi_detect, - .release = sun3scsi_release, - .info = sun3scsi_info, - .queuecommand = sun3scsi_queue_command, - .eh_abort_handler = sun3scsi_abort, - .eh_bus_reset_handler = sun3scsi_bus_reset, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_TABLESIZE, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); +#include "sun3_scsi.c"