--- zzzz-none-000/linux-3.10.107/drivers/scsi/ufs/ufshcd.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/scsi/ufs/ufshcd.c 2021-02-04 17:41:59.000000000 +0000 @@ -3,6 +3,7 @@ * * This code is based on drivers/scsi/ufs/ufshcd.c * Copyright (C) 2011-2013 Samsung India Software Operations + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. * * Authors: * Santosh Yaraganavi @@ -31,23 +32,96 @@ * circumstances will the contributor of this Program be liable for * any damages of any kind arising from your use or distribution of * this program. + * + * The Linux Foundation chooses to take subject only to the GPLv2 + * license terms, and distributes only under these terms. */ +#include +#include + #include "ufshcd.h" +#include "unipro.h" + +#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ + UTP_TASK_REQ_COMPL |\ + UFSHCD_ERROR_MASK) +/* UIC command timeout, unit: ms */ +#define UIC_CMD_TIMEOUT 500 + +/* NOP OUT retries waiting for NOP IN response */ +#define NOP_OUT_RETRIES 10 +/* Timeout after 30 msecs if NOP OUT hangs without response */ +#define NOP_OUT_TIMEOUT 30 /* msecs */ + +/* Query request retries */ +#define QUERY_REQ_RETRIES 10 +/* Query request timeout */ +#define QUERY_REQ_TIMEOUT 30 /* msec */ + +/* Task management command timeout */ +#define TM_CMD_TIMEOUT 100 /* msecs */ + +/* maximum number of link-startup retries */ +#define DME_LINKSTARTUP_RETRIES 3 + +/* maximum number of reset retries before giving up */ +#define MAX_HOST_RESET_RETRIES 5 + +/* Expose the flag value from utp_upiu_query.value */ +#define MASK_QUERY_UPIU_FLAG_LOC 0xFF + +/* Interrupt aggregation default timeout, unit: 40us */ +#define INT_AGGR_DEF_TO 0x02 + +#define ufshcd_toggle_vreg(_dev, _vreg, _on) \ + ({ \ + int _ret; \ + if (_on) \ + _ret = ufshcd_enable_vreg(_dev, _vreg); \ + else \ + _ret = ufshcd_disable_vreg(_dev, _vreg); \ + _ret; \ + }) + +static u32 ufs_query_desc_max_size[] = { + QUERY_DESC_DEVICE_MAX_SIZE, + QUERY_DESC_CONFIGURAION_MAX_SIZE, + QUERY_DESC_UNIT_MAX_SIZE, + QUERY_DESC_RFU_MAX_SIZE, + QUERY_DESC_INTERCONNECT_MAX_SIZE, + QUERY_DESC_STRING_MAX_SIZE, + QUERY_DESC_RFU_MAX_SIZE, + QUERY_DESC_GEOMETRY_MAZ_SIZE, + QUERY_DESC_POWER_MAX_SIZE, + QUERY_DESC_RFU_MAX_SIZE, +}; enum { UFSHCD_MAX_CHANNEL = 0, UFSHCD_MAX_ID = 1, - UFSHCD_MAX_LUNS = 8, UFSHCD_CMD_PER_LUN = 32, UFSHCD_CAN_QUEUE = 32, }; /* UFSHCD states */ enum { - UFSHCD_STATE_OPERATIONAL, UFSHCD_STATE_RESET, UFSHCD_STATE_ERROR, + UFSHCD_STATE_OPERATIONAL, +}; + +/* UFSHCD error handling flags */ +enum { + UFSHCD_EH_IN_PROGRESS = (1 << 0), +}; + +/* UFSHCD UIC layer error flags */ +enum { + UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */ + UFSHCD_UIC_NL_ERROR = (1 << 1), /* Network layer error */ + UFSHCD_UIC_TL_ERROR = (1 << 2), /* Transport Layer error */ + UFSHCD_UIC_DME_ERROR = (1 << 3), /* DME error */ }; /* Interrupt configuration options */ @@ -57,12 +131,138 @@ UFSHCD_INT_CLEAR, }; -/* Interrupt aggregation options */ -enum { - INT_AGGR_RESET, - INT_AGGR_CONFIG, +#define ufshcd_set_eh_in_progress(h) \ + (h->eh_flags |= UFSHCD_EH_IN_PROGRESS) +#define ufshcd_eh_in_progress(h) \ + (h->eh_flags & UFSHCD_EH_IN_PROGRESS) +#define ufshcd_clear_eh_in_progress(h) \ + (h->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) + +#define ufshcd_set_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) +#define ufshcd_set_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) +#define ufshcd_set_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) +#define ufshcd_is_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) +#define ufshcd_is_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) +#define ufshcd_is_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) + +static struct ufs_pm_lvl_states ufs_pm_lvl_states[] = { + {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE}, }; +static inline enum ufs_dev_pwr_mode +ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].dev_state; +} + +static inline enum uic_link_state +ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].link_state; +} + +static void ufshcd_tmc_handler(struct ufs_hba *hba); +static void ufshcd_async_scan(void *data, async_cookie_t cookie); +static int ufshcd_reset_and_restore(struct ufs_hba *hba); +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); +static void ufshcd_hba_exit(struct ufs_hba *hba); +static int ufshcd_probe_hba(struct ufs_hba *hba); +static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on, + bool skip_ref_clk); +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); +static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); +static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); +static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); +static irqreturn_t ufshcd_intr(int irq, void *__hba); +static int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode); +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode); + +static inline int ufshcd_enable_irq(struct ufs_hba *hba) +{ + int ret = 0; + + if (!hba->is_irq_enabled) { + ret = request_irq(hba->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, + hba); + if (ret) + dev_err(hba->dev, "%s: request_irq failed, ret=%d\n", + __func__, ret); + hba->is_irq_enabled = true; + } + + return ret; +} + +static inline void ufshcd_disable_irq(struct ufs_hba *hba) +{ + if (hba->is_irq_enabled) { + free_irq(hba->irq, hba); + hba->is_irq_enabled = false; + } +} + +/* + * ufshcd_wait_for_register - wait for register value to change + * @hba - per-adapter interface + * @reg - mmio register offset + * @mask - mask to apply to read register value + * @val - wait condition + * @interval_us - polling interval in microsecs + * @timeout_ms - timeout in millisecs + * + * Returns -ETIMEDOUT on error, zero on success + */ +static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long interval_us, unsigned long timeout_ms) +{ + int err = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + + /* ignore bits that we don't intend to wait on */ + val = val & mask; + + while ((ufshcd_readl(hba, reg) & mask) != val) { + /* wakeup within 50us of expiry */ + usleep_range(interval_us, interval_us + 50); + + if (time_after(jiffies, timeout)) { + if ((ufshcd_readl(hba, reg) & mask) != val) + err = -ETIMEDOUT; + break; + } + } + + return err; +} + +/** + * ufshcd_get_intr_mask - Get the interrupt bit mask + * @hba - Pointer to adapter instance + * + * Returns interrupt bit mask per version + */ +static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) +{ + if (hba->ufs_version == UFSHCI_VERSION_10) + return INTERRUPT_MASK_ALL_VER_10; + else + return INTERRUPT_MASK_ALL_VER_11; +} + /** * ufshcd_get_ufs_version - Get the UFS version supported by the HBA * @hba - Pointer to adapter instance @@ -71,19 +271,23 @@ */ static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) { - return readl(hba->mmio_base + REG_UFS_VERSION); + if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION) + return ufshcd_vops_get_ufs_hci_version(hba); + + return ufshcd_readl(hba, REG_UFS_VERSION); } /** * ufshcd_is_device_present - Check if any device connected to * the host controller - * @reg_hcs - host controller status register value + * @hba: pointer to adapter instance * * Returns 1 if device present, 0 if no device detected */ -static inline int ufshcd_is_device_present(u32 reg_hcs) +static inline int ufshcd_is_device_present(struct ufs_hba *hba) { - return (DEVICE_PRESENT & reg_hcs) ? 1 : 0; + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & + DEVICE_PRESENT) ? 1 : 0; } /** @@ -95,7 +299,7 @@ */ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) { - return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS; + return le32_to_cpu(lrbp->utr_descriptor_ptr->header.dword_2) & MASK_OCS; } /** @@ -108,19 +312,41 @@ static inline int ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp) { - return task_req_descp->header.dword_2 & MASK_OCS; + return le32_to_cpu(task_req_descp->header.dword_2) & MASK_OCS; } /** * ufshcd_get_tm_free_slot - get a free slot for task management request * @hba: per adapter instance + * @free_slot: pointer to variable with available slot value * - * Returns maximum number of task management request slots in case of - * task management queue full or returns the free slot number + * Get a free tag and lock it until ufshcd_put_tm_slot() is called. + * Returns 0 if free slot is not available, else return 1 with tag value + * in @free_slot. */ -static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba) +static bool ufshcd_get_tm_free_slot(struct ufs_hba *hba, int *free_slot) +{ + int tag; + bool ret = false; + + if (!free_slot) + goto out; + + do { + tag = find_first_zero_bit(&hba->tm_slots_in_use, hba->nutmrs); + if (tag >= hba->nutmrs) + goto out; + } while (test_and_set_bit_lock(tag, &hba->tm_slots_in_use)); + + *free_slot = tag; + ret = true; +out: + return ret; +} + +static inline void ufshcd_put_tm_slot(struct ufs_hba *hba, int slot) { - return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs); + clear_bit_unlock(slot, &hba->tm_slots_in_use); } /** @@ -130,8 +356,7 @@ */ static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) { - writel(~(1 << pos), - (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR)); + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); } /** @@ -165,55 +390,30 @@ */ static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) { - return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) & + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & MASK_UIC_COMMAND_RESULT; } /** - * ufshcd_free_hba_memory - Free allocated memory for LRB, request - * and task lists + * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command * @hba: Pointer to adapter instance + * + * This function gets UIC command argument3 + * Returns 0 on success, non zero value on error */ -static inline void ufshcd_free_hba_memory(struct ufs_hba *hba) +static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba) { - size_t utmrdl_size, utrdl_size, ucdl_size; - - kfree(hba->lrb); - - if (hba->utmrdl_base_addr) { - utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; - dma_free_coherent(hba->dev, utmrdl_size, - hba->utmrdl_base_addr, hba->utmrdl_dma_addr); - } - - if (hba->utrdl_base_addr) { - utrdl_size = - (sizeof(struct utp_transfer_req_desc) * hba->nutrs); - dma_free_coherent(hba->dev, utrdl_size, - hba->utrdl_base_addr, hba->utrdl_dma_addr); - } - - if (hba->ucdl_base_addr) { - ucdl_size = - (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); - dma_free_coherent(hba->dev, ucdl_size, - hba->ucdl_base_addr, hba->ucdl_dma_addr); - } + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); } /** - * ufshcd_is_valid_req_rsp - checks if controller TR response is valid + * ufshcd_get_req_rsp - returns the TR response transaction type * @ucd_rsp_ptr: pointer to response UPIU - * - * This function checks the response UPIU for valid transaction type in - * response field - * Returns 0 on success, non-zero on failure */ static inline int -ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) { - return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) == - UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16; + return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24; } /** @@ -229,34 +429,69 @@ return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; } +/* + * ufshcd_get_rsp_upiu_data_seg_len - Get the data segment length + * from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * Return the data segment length. + */ +static inline unsigned int +ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_UPIU_DATA_SEG_LEN; +} + +/** + * ufshcd_is_exception_event - Check if the device raised an exception event + * @ucd_rsp_ptr: pointer to response UPIU + * + * The function checks if the device raised an exception event indicated in + * the Device Information field of response UPIU. + * + * Returns true if exception is raised, false otherwise. + */ +static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_EXCEPTION_EVENT ? true : false; +} + /** - * ufshcd_config_int_aggr - Configure interrupt aggregation values. - * Currently there is no use case where we want to configure - * interrupt aggregation dynamically. So to configure interrupt - * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and - * INT_AGGR_TIMEOUT_VALUE are used. + * ufshcd_reset_intr_aggr - Reset interrupt aggregation values. * @hba: per adapter instance - * @option: Interrupt aggregation option */ static inline void -ufshcd_config_int_aggr(struct ufs_hba *hba, int option) +ufshcd_reset_intr_aggr(struct ufs_hba *hba) { - switch (option) { - case INT_AGGR_RESET: - writel((INT_AGGR_ENABLE | - INT_AGGR_COUNTER_AND_TIMER_RESET), - (hba->mmio_base + - REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); - break; - case INT_AGGR_CONFIG: - writel((INT_AGGR_ENABLE | - INT_AGGR_PARAM_WRITE | - INT_AGGR_COUNTER_THRESHOLD_VALUE | - INT_AGGR_TIMEOUT_VALUE), - (hba->mmio_base + - REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); - break; - } + ufshcd_writel(hba, INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_config_intr_aggr - Configure interrupt aggregation values. + * @hba: per adapter instance + * @cnt: Interrupt aggregation counter threshold + * @tmout: Interrupt aggregation timeout value + */ +static inline void +ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THLD_VAL(cnt) | + INT_AGGR_TIMEOUT_VAL(tmout), + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_disable_intr_aggr - Disables interrupt aggregation. + * @hba: per adapter instance + */ +static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); } /** @@ -267,12 +502,10 @@ */ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) { - writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT, - (hba->mmio_base + - REG_UTP_TASK_REQ_LIST_RUN_STOP)); - writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, - (hba->mmio_base + - REG_UTP_TRANSFER_REQ_LIST_RUN_STOP)); + ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TASK_REQ_LIST_RUN_STOP); + ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); } /** @@ -281,7 +514,7 @@ */ static inline void ufshcd_hba_start(struct ufs_hba *hba) { - writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE)); + ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE); } /** @@ -292,9 +525,272 @@ */ static inline int ufshcd_is_hba_active(struct ufs_hba *hba) { - return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1; + return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1; +} + +static void ufshcd_ungate_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_gating.ungate_work); + + cancel_delayed_work_sync(&hba->clk_gating.gate_work); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_gating.state == CLKS_ON) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + goto unblock_reqs; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_setup_clocks(hba, true); + + /* Exit from hibern8 */ + if (ufshcd_can_hibern8_during_gating(hba)) { + /* Prevent gating in this path */ + hba->clk_gating.is_suspended = true; + if (ufshcd_is_link_hibern8(hba)) { + ret = ufshcd_uic_hibern8_exit(hba); + if (ret) + dev_err(hba->dev, "%s: hibern8 exit failed %d\n", + __func__, ret); + else + ufshcd_set_link_active(hba); + } + hba->clk_gating.is_suspended = false; + } +unblock_reqs: + if (ufshcd_is_clkscaling_enabled(hba)) + devfreq_resume_device(hba->devfreq); + scsi_unblock_requests(hba->host); +} + +/** + * ufshcd_hold - Enable clocks that were gated earlier due to ufshcd_release. + * Also, exit from hibern8 mode and set the link as active. + * @hba: per adapter instance + * @async: This indicates whether caller should ungate clocks asynchronously. + */ +int ufshcd_hold(struct ufs_hba *hba, bool async) +{ + int rc = 0; + unsigned long flags; + + if (!ufshcd_is_clkgating_allowed(hba)) + goto out; + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.active_reqs++; + +start: + switch (hba->clk_gating.state) { + case CLKS_ON: + break; + case REQ_CLKS_OFF: + if (cancel_delayed_work(&hba->clk_gating.gate_work)) { + hba->clk_gating.state = CLKS_ON; + break; + } + /* + * If we here, it means gating work is either done or + * currently running. Hence, fall through to cancel gating + * work and to enable clocks. + */ + case CLKS_OFF: + scsi_block_requests(hba->host); + hba->clk_gating.state = REQ_CLKS_ON; + schedule_work(&hba->clk_gating.ungate_work); + /* + * fall through to check if we should wait for this + * work to be done or not. + */ + case REQ_CLKS_ON: + if (async) { + rc = -EAGAIN; + hba->clk_gating.active_reqs--; + break; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + flush_work(&hba->clk_gating.ungate_work); + /* Make sure state is CLKS_ON before returning */ + spin_lock_irqsave(hba->host->host_lock, flags); + goto start; + default: + dev_err(hba->dev, "%s: clk gating is in invalid state %d\n", + __func__, hba->clk_gating.state); + break; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return rc; } +EXPORT_SYMBOL_GPL(ufshcd_hold); + +static void ufshcd_gate_work(struct work_struct *work) +{ + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_gating.gate_work.work); + unsigned long flags; + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_gating.is_suspended) { + hba->clk_gating.state = CLKS_ON; + goto rel_lock; + } + + if (hba->clk_gating.active_reqs + || hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL + || hba->lrb_in_use || hba->outstanding_tasks + || hba->active_uic_cmd || hba->uic_async_done) + goto rel_lock; + + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* put the link into hibern8 mode before turning off clocks */ + if (ufshcd_can_hibern8_during_gating(hba)) { + if (ufshcd_uic_hibern8_enter(hba)) { + hba->clk_gating.state = CLKS_ON; + goto out; + } + ufshcd_set_link_hibern8(hba); + } + + if (ufshcd_is_clkscaling_enabled(hba)) { + devfreq_suspend_device(hba->devfreq); + hba->clk_scaling.window_start_t = 0; + } + + if (!ufshcd_is_link_active(hba)) + ufshcd_setup_clocks(hba, false); + else + /* If link is active, device ref_clk can't be switched off */ + __ufshcd_setup_clocks(hba, false, true); + + /* + * In case you are here to cancel this work the gating state + * would be marked as REQ_CLKS_ON. In this case keep the state + * as REQ_CLKS_ON which would anyway imply that clocks are off + * and a request to turn them on is pending. By doing this way, + * we keep the state machine in tact and this would ultimately + * prevent from doing cancel work multiple times when there are + * new requests arriving before the current cancel work is done. + */ + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_gating.state == REQ_CLKS_OFF) + hba->clk_gating.state = CLKS_OFF; + +rel_lock: + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return; +} + +/* host lock must be held before calling this variant */ +static void __ufshcd_release(struct ufs_hba *hba) +{ + if (!ufshcd_is_clkgating_allowed(hba)) + return; + + hba->clk_gating.active_reqs--; + + if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended + || hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL + || hba->lrb_in_use || hba->outstanding_tasks + || hba->active_uic_cmd || hba->uic_async_done) + return; + + hba->clk_gating.state = REQ_CLKS_OFF; + schedule_delayed_work(&hba->clk_gating.gate_work, + msecs_to_jiffies(hba->clk_gating.delay_ms)); +} + +void ufshcd_release(struct ufs_hba *hba) +{ + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + __ufshcd_release(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); +} +EXPORT_SYMBOL_GPL(ufshcd_release); + +static ssize_t ufshcd_clkgate_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%lu\n", hba->clk_gating.delay_ms); +} + +static ssize_t ufshcd_clkgate_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + unsigned long flags, value; + + if (kstrtoul(buf, 0, &value)) + return -EINVAL; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.delay_ms = value; + spin_unlock_irqrestore(hba->host->host_lock, flags); + return count; +} + +static void ufshcd_init_clk_gating(struct ufs_hba *hba) +{ + if (!ufshcd_is_clkgating_allowed(hba)) + return; + + hba->clk_gating.delay_ms = 150; + INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work); + INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work); + + hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show; + hba->clk_gating.delay_attr.store = ufshcd_clkgate_delay_store; + sysfs_attr_init(&hba->clk_gating.delay_attr.attr); + hba->clk_gating.delay_attr.attr.name = "clkgate_delay_ms"; + hba->clk_gating.delay_attr.attr.mode = S_IRUGO | S_IWUSR; + if (device_create_file(hba->dev, &hba->clk_gating.delay_attr)) + dev_err(hba->dev, "Failed to create sysfs for clkgate_delay\n"); +} + +static void ufshcd_exit_clk_gating(struct ufs_hba *hba) +{ + if (!ufshcd_is_clkgating_allowed(hba)) + return; + device_remove_file(hba->dev, &hba->clk_gating.delay_attr); + cancel_work_sync(&hba->clk_gating.ungate_work); + cancel_delayed_work_sync(&hba->clk_gating.gate_work); +} + +/* Must be called with host lock acquired */ +static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba) +{ + if (!ufshcd_is_clkscaling_enabled(hba)) + return; + + if (!hba->clk_scaling.is_busy_started) { + hba->clk_scaling.busy_start_t = ktime_get(); + hba->clk_scaling.is_busy_started = true; + } +} + +static void ufshcd_clk_scaling_update_busy(struct ufs_hba *hba) +{ + struct ufs_clk_scaling *scaling = &hba->clk_scaling; + + if (!ufshcd_is_clkscaling_enabled(hba)) + return; + + if (!hba->outstanding_reqs && scaling->is_busy_started) { + scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(), + scaling->busy_start_t)); + scaling->busy_start_t = ktime_set(0, 0); + scaling->is_busy_started = false; + } +} /** * ufshcd_send_command - Send SCSI or device management commands * @hba: per adapter instance @@ -303,9 +799,9 @@ static inline void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) { + ufshcd_clk_scaling_start_busy(hba); __set_bit(task_tag, &hba->outstanding_reqs); - writel((1 << task_tag), - (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL)); + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); } /** @@ -315,22 +811,60 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) { int len; - if (lrbp->sense_buffer) { - len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len); + if (lrbp->sense_buffer && + ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) { + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len); memcpy(lrbp->sense_buffer, - lrbp->ucd_rsp_ptr->sense_data, + lrbp->ucd_rsp_ptr->sr.sense_data, min_t(int, len, SCSI_SENSE_BUFFERSIZE)); } } /** + * ufshcd_copy_query_response() - Copy the Query Response and the data + * descriptor + * @hba: per adapter instance + * @lrb - pointer to local reference block + */ +static +int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); + + /* Get the descriptor */ + if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { + u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + + GENERAL_UPIU_REQUEST_SIZE; + u16 resp_len; + u16 buf_len; + + /* data segment length */ + resp_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) & + MASK_QUERY_DATA_SEG_LEN; + buf_len = be16_to_cpu( + hba->dev_cmd.query.request.upiu_req.length); + if (likely(buf_len >= resp_len)) { + memcpy(hba->dev_cmd.query.descriptor, descp, resp_len); + } else { + dev_warn(hba->dev, + "%s: Response size is bigger than buffer", + __func__); + return -EINVAL; + } + } + + return 0; +} + +/** * ufshcd_hba_capabilities - Read controller capabilities * @hba: per adapter instance */ static inline void ufshcd_hba_capabilities(struct ufs_hba *hba) { - hba->capabilities = - readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES); + hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); /* nutrs and nutmrs are 0 based values */ hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1; @@ -339,24 +873,134 @@ } /** - * ufshcd_send_uic_command - Send UIC commands to unipro layers + * ufshcd_ready_for_uic_cmd - Check if controller is ready + * to accept UIC commands * @hba: per adapter instance - * @uic_command: UIC command + * Return true on success, else false + */ +static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) +{ + if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY) + return true; + else + return false; +} + +/** + * ufshcd_get_upmcrs - Get the power mode change request status + * @hba: Pointer to adapter instance + * + * This function gets the UPMCRS field of HCS register + * Returns value of UPMCRS field + */ +static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; +} + +/** + * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Mutex must be held. */ static inline void -ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd) +ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) { + WARN_ON(hba->active_uic_cmd); + + hba->active_uic_cmd = uic_cmd; + /* Write Args */ - writel(uic_cmnd->argument1, - (hba->mmio_base + REG_UIC_COMMAND_ARG_1)); - writel(uic_cmnd->argument2, - (hba->mmio_base + REG_UIC_COMMAND_ARG_2)); - writel(uic_cmnd->argument3, - (hba->mmio_base + REG_UIC_COMMAND_ARG_3)); + ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); + ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); + ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); /* Write UIC Cmd */ - writel((uic_cmnd->command & COMMAND_OPCODE_MASK), - (hba->mmio_base + REG_UIC_COMMAND)); + ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, + REG_UIC_COMMAND); +} + +/** + * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command + * @hba: per adapter instance + * @uic_command: UIC command + * + * Must be called with mutex held. + * Returns 0 only if success. + */ +static int +ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + unsigned long flags; + + if (wait_for_completion_timeout(&uic_cmd->done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) + ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; + else + ret = -ETIMEDOUT; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->active_uic_cmd = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return ret; +} + +/** + * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called + * with mutex held and host_lock locked. + * Returns 0 only if success. + */ +static int +__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + if (!ufshcd_ready_for_uic_cmd(hba)) { + dev_err(hba->dev, + "Controller not ready to accept UIC commands\n"); + return -EIO; + } + + init_completion(&uic_cmd->done); + + ufshcd_dispatch_uic_cmd(hba, uic_cmd); + + return 0; +} + +/** + * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Returns 0 only if success. + */ +static int +ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + unsigned long flags; + + ufshcd_hold(hba, false); + mutex_lock(&hba->uic_cmd_mutex); + ufshcd_add_delay_before_dme_cmd(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + ret = __ufshcd_send_uic_cmd(hba, uic_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + if (!ret) + ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); + + mutex_unlock(&hba->uic_cmd_mutex); + + ufshcd_release(hba); + return ret; } /** @@ -400,99 +1044,235 @@ } /** - * ufshcd_int_config - enable/disable interrupts + * ufshcd_enable_intr - enable interrupts * @hba: per adapter instance - * @option: interrupt option + * @intrs: interrupt bits */ -static void ufshcd_int_config(struct ufs_hba *hba, u32 option) +static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) { - switch (option) { - case UFSHCD_INT_ENABLE: - writel(hba->int_enable_mask, - (hba->mmio_base + REG_INTERRUPT_ENABLE)); - break; - case UFSHCD_INT_DISABLE: - if (hba->ufs_version == UFSHCI_VERSION_10) - writel(INTERRUPT_DISABLE_MASK_10, - (hba->mmio_base + REG_INTERRUPT_ENABLE)); - else - writel(INTERRUPT_DISABLE_MASK_11, - (hba->mmio_base + REG_INTERRUPT_ENABLE)); - break; + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == UFSHCI_VERSION_10) { + u32 rw; + rw = set & INTERRUPT_MASK_RW_VER_10; + set = rw | ((set ^ intrs) & intrs); + } else { + set |= intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_disable_intr - disable interrupts + * @hba: per adapter instance + * @intrs: interrupt bits + */ +static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == UFSHCI_VERSION_10) { + u32 rw; + rw = (set & INTERRUPT_MASK_RW_VER_10) & + ~(intrs & INTERRUPT_MASK_RW_VER_10); + set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10); + + } else { + set &= ~intrs; } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_prepare_req_desc_hdr() - Fills the requests header + * descriptor according to request + * @lrbp: pointer to local reference block + * @upiu_flags: flags required in the header + * @cmd_dir: requests data direction + */ +static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp, + u32 *upiu_flags, enum dma_data_direction cmd_dir) +{ + struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr; + u32 data_direction; + u32 dword_0; + + if (cmd_dir == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + *upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (cmd_dir == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + *upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + *upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + dword_0 = data_direction | (lrbp->command_type + << UPIU_COMMAND_TYPE_OFFSET); + if (lrbp->intr_cmd) + dword_0 |= UTP_REQ_DESC_INT_CMD; + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = cpu_to_le32(dword_0); + + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); +} + +/** + * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc, + * for scsi commands + * @lrbp - local reference block pointer + * @upiu_flags - flags + */ +static +void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_COMMAND, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0); + + /* Total EHS length and Data segment length will be zero */ + ucd_req_ptr->header.dword_2 = 0; + + ucd_req_ptr->sc.exp_data_transfer_len = + cpu_to_be32(lrbp->cmd->sdb.length); + + memcpy(ucd_req_ptr->sc.cdb, lrbp->cmd->cmnd, + (min_t(unsigned short, lrbp->cmd->cmd_len, MAX_CDB_SIZE))); +} + +/** + * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc, + * for query requsts + * @hba: UFS hba + * @lrbp: local reference block pointer + * @upiu_flags: flags + */ +static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + struct ufs_query *query = &hba->dev_cmd.query; + u16 len = be16_to_cpu(query->request.upiu_req.length); + u8 *descp = (u8 *)lrbp->ucd_req_ptr + GENERAL_UPIU_REQUEST_SIZE; + + /* Query request header */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_QUERY_REQ, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + 0, query->request.query_func, 0, 0); + + /* Data segment length */ + ucd_req_ptr->header.dword_2 = UPIU_HEADER_DWORD( + 0, 0, len >> 8, (u8)len); + + /* Copy the Query Request buffer as is */ + memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, + QUERY_OSF_SIZE); + + /* Copy the Descriptor */ + if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) + memcpy(descp, query->descriptor, len); + +} + +static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + + memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD( + UPIU_TRANSACTION_NOP_OUT, 0, 0, lrbp->task_tag); } /** * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU) + * @hba - per adapter instance * @lrb - pointer to local reference block */ -static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp) +static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) { - struct utp_transfer_req_desc *req_desc; - struct utp_upiu_cmd *ucd_cmd_ptr; - u32 data_direction; u32 upiu_flags; - - ucd_cmd_ptr = lrbp->ucd_cmd_ptr; - req_desc = lrbp->utr_descriptor_ptr; + int ret = 0; switch (lrbp->command_type) { case UTP_CMD_TYPE_SCSI: - if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) { - data_direction = UTP_DEVICE_TO_HOST; - upiu_flags = UPIU_CMD_FLAGS_READ; - } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) { - data_direction = UTP_HOST_TO_DEVICE; - upiu_flags = UPIU_CMD_FLAGS_WRITE; + if (likely(lrbp->cmd)) { + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, + lrbp->cmd->sc_data_direction); + ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags); } else { - data_direction = UTP_NO_DATA_TRANSFER; - upiu_flags = UPIU_CMD_FLAGS_NONE; + ret = -EINVAL; } - - /* Transfer request descriptor header fields */ - req_desc->header.dword_0 = - cpu_to_le32(data_direction | UTP_SCSI_COMMAND); - - /* - * assigning invalid value for command status. Controller - * updates OCS on command completion, with the command - * status - */ - req_desc->header.dword_2 = - cpu_to_le32(OCS_INVALID_COMMAND_STATUS); - - /* command descriptor fields */ - ucd_cmd_ptr->header.dword_0 = - cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, - upiu_flags, - lrbp->lun, - lrbp->task_tag)); - ucd_cmd_ptr->header.dword_1 = - cpu_to_be32( - UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, - 0, - 0, - 0)); - - /* Total EHS length and Data segment length will be zero */ - ucd_cmd_ptr->header.dword_2 = 0; - - ucd_cmd_ptr->exp_data_transfer_len = - cpu_to_be32(lrbp->cmd->sdb.length); - - memcpy(ucd_cmd_ptr->cdb, - lrbp->cmd->cmnd, - (min_t(unsigned short, - lrbp->cmd->cmd_len, - MAX_CDB_SIZE))); break; case UTP_CMD_TYPE_DEV_MANAGE: - /* For query function implementation */ + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); + if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) + ufshcd_prepare_utp_query_req_upiu( + hba, lrbp, upiu_flags); + else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP) + ufshcd_prepare_utp_nop_upiu(lrbp); + else + ret = -EINVAL; break; case UTP_CMD_TYPE_UFS: /* For UFS native command implementation */ + ret = -ENOTSUPP; + dev_err(hba->dev, "%s: UFS native command are not supported\n", + __func__); + break; + default: + ret = -ENOTSUPP; + dev_err(hba->dev, "%s: unknown command type: 0x%x\n", + __func__, lrbp->command_type); break; } /* end of switch */ + + return ret; +} + +/* + * ufshcd_scsi_to_upiu_lun - maps scsi LUN to UPIU LUN + * @scsi_lun: scsi LUN id + * + * Returns UPIU LUN id + */ +static inline u8 ufshcd_scsi_to_upiu_lun(unsigned int scsi_lun) +{ + if (scsi_is_wlun(scsi_lun)) + return (scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID) + | UFS_UPIU_WLUN_ID; + else + return scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID; +} + +/** + * ufshcd_upiu_wlun_to_scsi_wlun - maps UPIU W-LUN id to SCSI W-LUN ID + * @scsi_lun: UPIU W-LUN id + * + * Returns SCSI W-LUN id + */ +static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) +{ + return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; } /** @@ -514,35 +1294,620 @@ tag = cmd->request->tag; - if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { + spin_lock_irqsave(hba->host->host_lock, flags); + switch (hba->ufshcd_state) { + case UFSHCD_STATE_OPERATIONAL: + break; + case UFSHCD_STATE_RESET: err = SCSI_MLQUEUE_HOST_BUSY; + goto out_unlock; + case UFSHCD_STATE_ERROR: + set_host_byte(cmd, DID_ERROR); + cmd->scsi_done(cmd); + goto out_unlock; + default: + dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n", + __func__, hba->ufshcd_state); + set_host_byte(cmd, DID_BAD_TARGET); + cmd->scsi_done(cmd); + goto out_unlock; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* acquire the tag to make sure device cmds don't use it */ + if (test_and_set_bit_lock(tag, &hba->lrb_in_use)) { + /* + * Dev manage command in progress, requeue the command. + * Requeuing the command helps in cases where the request *may* + * find different tag instead of waiting for dev manage command + * completion. + */ + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + err = ufshcd_hold(hba, true); + if (err) { + err = SCSI_MLQUEUE_HOST_BUSY; + clear_bit_unlock(tag, &hba->lrb_in_use); goto out; } + WARN_ON(hba->clk_gating.state != CLKS_ON); lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); lrbp->cmd = cmd; lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE; lrbp->sense_buffer = cmd->sense_buffer; lrbp->task_tag = tag; - lrbp->lun = cmd->device->lun; - + lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); + lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false; lrbp->command_type = UTP_CMD_TYPE_SCSI; /* form UPIU before issuing the command */ - ufshcd_compose_upiu(lrbp); + ufshcd_compose_upiu(hba, lrbp); err = ufshcd_map_sg(lrbp); - if (err) + if (err) { + lrbp->cmd = NULL; + clear_bit_unlock(tag, &hba->lrb_in_use); goto out; + } /* issue command to the controller */ spin_lock_irqsave(hba->host->host_lock, flags); ufshcd_send_command(hba, tag); +out_unlock: spin_unlock_irqrestore(hba->host->host_lock, flags); out: return err; } +static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, enum dev_cmd_type cmd_type, int tag) +{ + lrbp->cmd = NULL; + lrbp->sense_bufflen = 0; + lrbp->sense_buffer = NULL; + lrbp->task_tag = tag; + lrbp->lun = 0; /* device management cmd is not specific to any LUN */ + lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + lrbp->intr_cmd = true; /* No interrupt aggregation */ + hba->dev_cmd.type = cmd_type; + + return ufshcd_compose_upiu(hba, lrbp); +} + +static int +ufshcd_clear_cmd(struct ufs_hba *hba, int tag) +{ + int err = 0; + unsigned long flags; + u32 mask = 1 << tag; + + /* clear outstanding transaction before retry */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_utrl_clear(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* + * wait for for h/w to clear corresponding bit in door-bell. + * max. wait is 1 sec. + */ + err = ufshcd_wait_for_register(hba, + REG_UTP_TRANSFER_REQ_DOOR_BELL, + mask, ~mask, 1000, 1000); + + return err; +} + +static int +ufshcd_check_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + /* Get the UPIU response */ + query_res->response = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr) >> + UPIU_RSP_CODE_OFFSET; + return query_res->response; +} + +/** + * ufshcd_dev_cmd_completion() - handles device management command responses + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static int +ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int resp; + int err = 0; + + resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + + switch (resp) { + case UPIU_TRANSACTION_NOP_IN: + if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) { + err = -EINVAL; + dev_err(hba->dev, "%s: unexpected response %x\n", + __func__, resp); + } + break; + case UPIU_TRANSACTION_QUERY_RSP: + err = ufshcd_check_query_response(hba, lrbp); + if (!err) + err = ufshcd_copy_query_response(hba, lrbp); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + err = -EPERM; + dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", + __func__); + break; + default: + err = -EINVAL; + dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", + __func__, resp); + break; + } + + return err; +} + +static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, int max_timeout) +{ + int err = 0; + unsigned long time_left; + unsigned long flags; + + time_left = wait_for_completion_timeout(hba->dev_cmd.complete, + msecs_to_jiffies(max_timeout)); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->dev_cmd.complete = NULL; + if (likely(time_left)) { + err = ufshcd_get_tr_ocs(lrbp); + if (!err) + err = ufshcd_dev_cmd_completion(hba, lrbp); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (!time_left) { + err = -ETIMEDOUT; + if (!ufshcd_clear_cmd(hba, lrbp->task_tag)) + /* sucessfully cleared the command, retry if needed */ + err = -EAGAIN; + } + + return err; +} + +/** + * ufshcd_get_dev_cmd_tag - Get device management command tag + * @hba: per-adapter instance + * @tag: pointer to variable with available slot value + * + * Get a free slot and lock it until device management command + * completes. + * + * Returns false if free slot is unavailable for locking, else + * return true with tag value in @tag. + */ +static bool ufshcd_get_dev_cmd_tag(struct ufs_hba *hba, int *tag_out) +{ + int tag; + bool ret = false; + unsigned long tmp; + + if (!tag_out) + goto out; + + do { + tmp = ~hba->lrb_in_use; + tag = find_last_bit(&tmp, hba->nutrs); + if (tag >= hba->nutrs) + goto out; + } while (test_and_set_bit_lock(tag, &hba->lrb_in_use)); + + *tag_out = tag; + ret = true; +out: + return ret; +} + +static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag) +{ + clear_bit_unlock(tag, &hba->lrb_in_use); +} + +/** + * ufshcd_exec_dev_cmd - API for sending device management requests + * @hba - UFS hba + * @cmd_type - specifies the type (NOP, Query...) + * @timeout - time in seconds + * + * NOTE: Since there is only one available tag for device management commands, + * it is expected you hold the hba->dev_cmd.lock mutex. + */ +static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, + enum dev_cmd_type cmd_type, int timeout) +{ + struct ufshcd_lrb *lrbp; + int err; + int tag; + struct completion wait; + unsigned long flags; + + /* + * Get free slot, sleep if slots are unavailable. + * Even though we use wait_event() which sleeps indefinitely, + * the maximum wait time is bounded by SCSI request timeout. + */ + wait_event(hba->dev_cmd.tag_wq, ufshcd_get_dev_cmd_tag(hba, &tag)); + + init_completion(&wait); + lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); + err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag); + if (unlikely(err)) + goto out_put_tag; + + hba->dev_cmd.complete = &wait; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_send_command(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout); + +out_put_tag: + ufshcd_put_dev_cmd_tag(hba, tag); + wake_up(&hba->dev_cmd.tag_wq); + return err; +} + +/** + * ufshcd_init_query() - init the query response and request parameters + * @hba: per-adapter instance + * @request: address of the request pointer to be initialized + * @response: address of the response pointer to be initialized + * @opcode: operation to perform + * @idn: flag idn to access + * @index: LU number to access + * @selector: query/flag/descriptor further identification + */ +static inline void ufshcd_init_query(struct ufs_hba *hba, + struct ufs_query_req **request, struct ufs_query_res **response, + enum query_opcode opcode, u8 idn, u8 index, u8 selector) +{ + *request = &hba->dev_cmd.query.request; + *response = &hba->dev_cmd.query.response; + memset(*request, 0, sizeof(struct ufs_query_req)); + memset(*response, 0, sizeof(struct ufs_query_res)); + (*request)->upiu_req.opcode = opcode; + (*request)->upiu_req.idn = idn; + (*request)->upiu_req.index = index; + (*request)->upiu_req.selector = selector; +} + +/** + * ufshcd_query_flag() - API function for sending flag query requests + * hba: per-adapter instance + * query_opcode: flag query to perform + * idn: flag idn to access + * flag_res: the flag value after the query request completes + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, + enum flag_idn idn, bool *flag_res) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err, index = 0, selector = 0; + + BUG_ON(!hba); + + ufshcd_hold(hba, false); + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + + switch (opcode) { + case UPIU_QUERY_OPCODE_SET_FLAG: + case UPIU_QUERY_OPCODE_CLEAR_FLAG: + case UPIU_QUERY_OPCODE_TOGGLE_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + if (!flag_res) { + /* No dummy reads */ + dev_err(hba->dev, "%s: Invalid argument for read request\n", + __func__); + err = -EINVAL; + goto out_unlock; + } + break; + default: + dev_err(hba->dev, + "%s: Expected query flag opcode but got = %d\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, + "%s: Sending flag query for idn %d failed, err = %d\n", + __func__, idn, err); + goto out_unlock; + } + + if (flag_res) + *flag_res = (be32_to_cpu(response->upiu_res.value) & + MASK_QUERY_UPIU_FLAG_LOC) & 0x1; + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_query_attr - API function for sending attribute requests + * hba: per-adapter instance + * opcode: attribute opcode + * idn: attribute idn to access + * index: index field + * selector: selector field + * attr_val: the attribute value after the query request completes + * + * Returns 0 for success, non-zero in case of failure +*/ +static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode, + enum attr_idn idn, u8 index, u8 selector, u32 *attr_val) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err; + + BUG_ON(!hba); + + ufshcd_hold(hba, false); + if (!attr_val) { + dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + request->upiu_req.value = cpu_to_be32(*attr_val); + break; + case UPIU_QUERY_OPCODE_READ_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, err = %d\n", + __func__, opcode, idn, err); + goto out_unlock; + } + + *attr_val = be32_to_cpu(response->upiu_res.value); + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); +out: + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_query_descriptor - API function for sending descriptor requests + * hba: per-adapter instance + * opcode: attribute opcode + * idn: attribute idn to access + * index: index field + * selector: selector field + * desc_buf: the buffer that contains the descriptor + * buf_len: length parameter passed to the device + * + * Returns 0 for success, non-zero in case of failure. + * The buf_len parameter will contain, on return, the length parameter + * received on the response. + */ +static int ufshcd_query_descriptor(struct ufs_hba *hba, + enum query_opcode opcode, enum desc_idn idn, u8 index, + u8 selector, u8 *desc_buf, int *buf_len) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err; + + BUG_ON(!hba); + + ufshcd_hold(hba, false); + if (!desc_buf) { + dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + if (*buf_len <= QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) { + dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n", + __func__, *buf_len); + err = -EINVAL; + goto out; + } + + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + hba->dev_cmd.query.descriptor = desc_buf; + request->upiu_req.length = cpu_to_be16(*buf_len); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, + "%s: Expected query descriptor opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, err = %d\n", + __func__, opcode, idn, err); + goto out_unlock; + } + + hba->dev_cmd.query.descriptor = NULL; + *buf_len = be16_to_cpu(response->upiu_res.length); + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); +out: + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_read_desc_param - read the specified descriptor parameter + * @hba: Pointer to adapter instance + * @desc_id: descriptor idn value + * @desc_index: descriptor index + * @param_offset: offset of the parameter to read + * @param_read_buf: pointer to buffer where parameter would be read + * @param_size: sizeof(param_read_buf) + * + * Return 0 in case of success, non-zero otherwise + */ +static int ufshcd_read_desc_param(struct ufs_hba *hba, + enum desc_idn desc_id, + int desc_index, + u32 param_offset, + u8 *param_read_buf, + u32 param_size) +{ + int ret; + u8 *desc_buf; + u32 buff_len; + bool is_kmalloc = true; + + /* safety checks */ + if (desc_id >= QUERY_DESC_IDN_MAX) + return -EINVAL; + + buff_len = ufs_query_desc_max_size[desc_id]; + if ((param_offset + param_size) > buff_len) + return -EINVAL; + + if (!param_offset && (param_size == buff_len)) { + /* memory space already available to hold full descriptor */ + desc_buf = param_read_buf; + is_kmalloc = false; + } else { + /* allocate memory to hold full descriptor */ + desc_buf = kmalloc(buff_len, GFP_KERNEL); + if (!desc_buf) + return -ENOMEM; + } + + ret = ufshcd_query_descriptor(hba, UPIU_QUERY_OPCODE_READ_DESC, + desc_id, desc_index, 0, desc_buf, + &buff_len); + + if (ret || (buff_len < ufs_query_desc_max_size[desc_id]) || + (desc_buf[QUERY_DESC_LENGTH_OFFSET] != + ufs_query_desc_max_size[desc_id]) + || (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id)) { + dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d param_offset %d buff_len %d ret %d", + __func__, desc_id, param_offset, buff_len, ret); + if (!ret) + ret = -EINVAL; + + goto out; + } + + if (is_kmalloc) + memcpy(param_read_buf, &desc_buf[param_offset], param_size); +out: + if (is_kmalloc) + kfree(desc_buf); + return ret; +} + +static inline int ufshcd_read_desc(struct ufs_hba *hba, + enum desc_idn desc_id, + int desc_index, + u8 *buf, + u32 size) +{ + return ufshcd_read_desc_param(hba, desc_id, desc_index, 0, buf, size); +} + +static inline int ufshcd_read_power_desc(struct ufs_hba *hba, + u8 *buf, + u32 size) +{ + return ufshcd_read_desc(hba, QUERY_DESC_IDN_POWER, 0, buf, size); +} + +/** + * ufshcd_read_unit_desc_param - read the specified unit descriptor parameter + * @hba: Pointer to adapter instance + * @lun: lun id + * @param_offset: offset of the parameter to read + * @param_read_buf: pointer to buffer where parameter would be read + * @param_size: sizeof(param_read_buf) + * + * Return 0 in case of success, non-zero otherwise + */ +static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba, + int lun, + enum unit_desc_param param_offset, + u8 *param_read_buf, + u32 param_size) +{ + /* + * Unit descriptors are only available for general purpose LUs (LUN id + * from 0 to 7) and RPMB Well known LU. + */ + if (lun != UFS_UPIU_RPMB_WLUN && (lun >= UFS_UPIU_MAX_GENERAL_LUN)) + return -EOPNOTSUPP; + + return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun, + param_offset, param_read_buf, param_size); +} + /** * ufshcd_memory_alloc - allocate memory for host memory space data structures * @hba: per adapter instance @@ -562,10 +1927,10 @@ /* Allocate memory for UTP command descriptors */ ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); - hba->ucdl_base_addr = dma_alloc_coherent(hba->dev, - ucdl_size, - &hba->ucdl_dma_addr, - GFP_KERNEL); + hba->ucdl_base_addr = dmam_alloc_coherent(hba->dev, + ucdl_size, + &hba->ucdl_dma_addr, + GFP_KERNEL); /* * UFSHCI requires UTP command descriptor to be 128 byte aligned. @@ -585,10 +1950,10 @@ * UFSHCI requires 1024 byte alignment of UTRD */ utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); - hba->utrdl_base_addr = dma_alloc_coherent(hba->dev, - utrdl_size, - &hba->utrdl_dma_addr, - GFP_KERNEL); + hba->utrdl_base_addr = dmam_alloc_coherent(hba->dev, + utrdl_size, + &hba->utrdl_dma_addr, + GFP_KERNEL); if (!hba->utrdl_base_addr || WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { dev_err(hba->dev, @@ -601,10 +1966,10 @@ * UFSHCI requires 1024 byte alignment of UTMRD */ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; - hba->utmrdl_base_addr = dma_alloc_coherent(hba->dev, - utmrdl_size, - &hba->utmrdl_dma_addr, - GFP_KERNEL); + hba->utmrdl_base_addr = dmam_alloc_coherent(hba->dev, + utmrdl_size, + &hba->utmrdl_dma_addr, + GFP_KERNEL); if (!hba->utmrdl_base_addr || WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { dev_err(hba->dev, @@ -613,14 +1978,15 @@ } /* Allocate memory for local reference block */ - hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL); + hba->lrb = devm_kzalloc(hba->dev, + hba->nutrs * sizeof(struct ufshcd_lrb), + GFP_KERNEL); if (!hba->lrb) { dev_err(hba->dev, "LRB Memory allocation failed\n"); goto out; } return 0; out: - ufshcd_free_hba_memory(hba); return -ENOMEM; } @@ -674,11 +2040,11 @@ utrdlp[i].prd_table_offset = cpu_to_le16((prdt_offset >> 2)); utrdlp[i].response_upiu_length = - cpu_to_le16(ALIGNED_UPIU_SIZE); + cpu_to_le16(ALIGNED_UPIU_SIZE >> 2); hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); - hba->lrb[i].ucd_cmd_ptr = - (struct utp_upiu_cmd *)(cmd_descp + i); + hba->lrb[i].ucd_req_ptr = + (struct utp_upiu_req *)(cmd_descp + i); hba->lrb[i].ucd_rsp_ptr = (struct utp_upiu_rsp *)cmd_descp[i].response_upiu; hba->lrb[i].ucd_prdt_ptr = @@ -699,46 +2065,506 @@ */ static int ufshcd_dme_link_startup(struct ufs_hba *hba) { - struct uic_command *uic_cmd; + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_LINK_STARTUP; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-link-startup: error code %d\n", ret); + return ret; +} + +static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba) +{ + #define MIN_DELAY_BEFORE_DME_CMDS_US 1000 + unsigned long min_sleep_time_us; + + if (!(hba->quirks & UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS)) + return; + + /* + * last_dme_cmd_tstamp will be 0 only for 1st call to + * this function + */ + if (unlikely(!ktime_to_us(hba->last_dme_cmd_tstamp))) { + min_sleep_time_us = MIN_DELAY_BEFORE_DME_CMDS_US; + } else { + unsigned long delta = + (unsigned long) ktime_to_us( + ktime_sub(ktime_get(), + hba->last_dme_cmd_tstamp)); + + if (delta < MIN_DELAY_BEFORE_DME_CMDS_US) + min_sleep_time_us = + MIN_DELAY_BEFORE_DME_CMDS_US - delta; + else + return; /* no more delay required */ + } + + /* allow sleep for extra 50us if needed */ + usleep_range(min_sleep_time_us, min_sleep_time_us + 50); +} + +/** + * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @attr_set: attribute set type as uic command argument2 + * @mib_val: setting value as uic command argument3 + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-set", + "dme-peer-set" + }; + const char *set = action[!!peer]; + int ret; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET; + uic_cmd.argument1 = attr_sel; + uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set); + uic_cmd.argument3 = mib_val; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr); + +/** + * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @mib_val: the value of the attribute as returned by the UIC command + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-get", + "dme-peer-get" + }; + const char *get = action[!!peer]; + int ret; + struct ufs_pa_layer_attr orig_pwr_info; + struct ufs_pa_layer_attr temp_pwr_info; + bool pwr_mode_change = false; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { + orig_pwr_info = hba->pwr_info; + temp_pwr_info = orig_pwr_info; + + if (orig_pwr_info.pwr_tx == FAST_MODE || + orig_pwr_info.pwr_rx == FAST_MODE) { + temp_pwr_info.pwr_tx = FASTAUTO_MODE; + temp_pwr_info.pwr_rx = FASTAUTO_MODE; + pwr_mode_change = true; + } else if (orig_pwr_info.pwr_tx == SLOW_MODE || + orig_pwr_info.pwr_rx == SLOW_MODE) { + temp_pwr_info.pwr_tx = SLOWAUTO_MODE; + temp_pwr_info.pwr_rx = SLOWAUTO_MODE; + pwr_mode_change = true; + } + if (pwr_mode_change) { + ret = ufshcd_change_power_mode(hba, &temp_pwr_info); + if (ret) + goto out; + } + } + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; + uic_cmd.argument1 = attr_sel; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) { + dev_err(hba->dev, "%s: attr-id 0x%x error code %d\n", + get, UIC_GET_ATTR_ID(attr_sel), ret); + goto out; + } + + if (mib_val) + *mib_val = uic_cmd.argument3; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE) + && pwr_mode_change) + ufshcd_change_power_mode(hba, &orig_pwr_info); +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); + +/** + * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power + * state) and waits for it to take effect. + * + * @hba: per adapter instance + * @cmd: UIC command to execute + * + * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER & + * DME_HIBERNATE_EXIT commands take some time to take its effect on both host + * and device UniPro link and hence it's final completion would be indicated by + * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in + * addition to normal UIC command completion Status (UCCS). This function only + * returns after the relevant status bits indicate the completion. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) +{ + struct completion uic_async_done; unsigned long flags; + u8 status; + int ret; - /* check if controller is ready to accept UIC commands */ - if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) & - UIC_COMMAND_READY) == 0x0) { + mutex_lock(&hba->uic_cmd_mutex); + init_completion(&uic_async_done); + ufshcd_add_delay_before_dme_cmd(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->uic_async_done = &uic_async_done; + ret = __ufshcd_send_uic_cmd(hba, cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + if (ret) { dev_err(hba->dev, - "Controller not ready" - " to accept UIC commands\n"); - return -EIO; + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); + goto out; + } + ret = ufshcd_wait_for_uic_cmd(hba, cmd); + if (ret) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); + goto out; + } + + if (!wait_for_completion_timeout(hba->uic_async_done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n", + cmd->command, cmd->argument3); + ret = -ETIMEDOUT; + goto out; } + status = ufshcd_get_upmcrs(hba); + if (status != PWR_LOCAL) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%0x failed, host umpcrs:0x%x\n", + cmd->command, status); + ret = (status != PWR_OK) ? status : -1; + } +out: spin_lock_irqsave(hba->host->host_lock, flags); + hba->uic_async_done = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + mutex_unlock(&hba->uic_cmd_mutex); - /* form UIC command */ - uic_cmd = &hba->active_uic_cmd; - uic_cmd->command = UIC_CMD_DME_LINK_STARTUP; - uic_cmd->argument1 = 0; - uic_cmd->argument2 = 0; - uic_cmd->argument3 = 0; + return ret; +} - /* enable UIC related interrupts */ - hba->int_enable_mask |= UIC_COMMAND_COMPL; - ufshcd_int_config(hba, UFSHCD_INT_ENABLE); +/** + * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage + * using DME_SET primitives. + * @hba: per adapter instance + * @mode: powr mode value + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +{ + struct uic_command uic_cmd = {0}; + int ret; - /* sending UIC commands to controller */ - ufshcd_send_uic_command(hba, uic_cmd); - spin_unlock_irqrestore(hba->host->host_lock, flags); + if (hba->quirks & UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP) { + ret = ufshcd_dme_set(hba, + UIC_ARG_MIB_SEL(PA_RXHSUNTERMCAP, 0), 1); + if (ret) { + dev_err(hba->dev, "%s: failed to enable PA_RXHSUNTERMCAP ret %d\n", + __func__, ret); + goto out; + } + } + + uic_cmd.command = UIC_CMD_DME_SET; + uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); + uic_cmd.argument3 = mode; + ufshcd_hold(hba, false); + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + ufshcd_release(hba); + +out: + return ret; +} + +static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + + uic_cmd.command = UIC_CMD_DME_HIBER_ENTER; + + return ufshcd_uic_pwr_ctrl(hba, &uic_cmd); +} + +static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_HIBER_EXIT; + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + if (ret) { + ufshcd_set_link_off(hba); + ret = ufshcd_host_reset_and_restore(hba); + } + + return ret; +} + + /** + * ufshcd_init_pwr_info - setting the POR (power on reset) + * values in hba power info + * @hba: per-adapter instance + */ +static void ufshcd_init_pwr_info(struct ufs_hba *hba) +{ + hba->pwr_info.gear_rx = UFS_PWM_G1; + hba->pwr_info.gear_tx = UFS_PWM_G1; + hba->pwr_info.lane_rx = 1; + hba->pwr_info.lane_tx = 1; + hba->pwr_info.pwr_rx = SLOWAUTO_MODE; + hba->pwr_info.pwr_tx = SLOWAUTO_MODE; + hba->pwr_info.hs_rate = 0; +} + +/** + * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device + * @hba: per-adapter instance + */ +static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) +{ + struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; + + if (hba->max_pwr_info.is_valid) + return 0; + + pwr_info->pwr_tx = FASTAUTO_MODE; + pwr_info->pwr_rx = FASTAUTO_MODE; + pwr_info->hs_rate = PA_HS_MODE_B; + + /* Get the connected lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &pwr_info->lane_rx); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &pwr_info->lane_tx); + + if (!pwr_info->lane_rx || !pwr_info->lane_tx) { + dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", + __func__, + pwr_info->lane_rx, + pwr_info->lane_tx); + return -EINVAL; + } + + /* + * First, get the maximum gears of HS speed. + * If a zero value, it means there is no HSGEAR capability. + * Then, get the maximum gears of PWM speed. + */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", + __func__, pwr_info->gear_rx); + return -EINVAL; + } + pwr_info->pwr_rx = SLOWAUTO_MODE; + } + + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", + __func__, pwr_info->gear_tx); + return -EINVAL; + } + pwr_info->pwr_tx = SLOWAUTO_MODE; + } + + hba->max_pwr_info.is_valid = true; return 0; } +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode) +{ + int ret; + + /* if already configured to the requested pwr_mode */ + if (pwr_mode->gear_rx == hba->pwr_info.gear_rx && + pwr_mode->gear_tx == hba->pwr_info.gear_tx && + pwr_mode->lane_rx == hba->pwr_info.lane_rx && + pwr_mode->lane_tx == hba->pwr_info.lane_tx && + pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && + pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && + pwr_mode->hs_rate == hba->pwr_info.hs_rate) { + dev_dbg(hba->dev, "%s: power already configured\n", __func__); + return 0; + } + + /* + * Configure attributes for power mode change with below. + * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, + * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, + * - PA_HSSERIES + */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), + pwr_mode->lane_rx); + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE); + + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), + pwr_mode->lane_tx); + if (pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE); + + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), + pwr_mode->hs_rate); + + ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 + | pwr_mode->pwr_tx); + + if (ret) { + dev_err(hba->dev, + "%s: power mode change failed %d\n", __func__, ret); + } else { + ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, NULL, + pwr_mode); + + memcpy(&hba->pwr_info, pwr_mode, + sizeof(struct ufs_pa_layer_attr)); + } + + return ret; +} + +/** + * ufshcd_config_pwr_mode - configure a new power mode + * @hba: per-adapter instance + * @desired_pwr_mode: desired power configuration + */ +static int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode) +{ + struct ufs_pa_layer_attr final_params = { 0 }; + int ret; + + ret = ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE, + desired_pwr_mode, &final_params); + + if (ret) + memcpy(&final_params, desired_pwr_mode, sizeof(final_params)); + + ret = ufshcd_change_power_mode(hba, &final_params); + + return ret; +} + +/** + * ufshcd_complete_dev_init() - checks device readiness + * hba: per-adapter instance + * + * Set fDeviceInit flag and poll until device toggles it. + */ +static int ufshcd_complete_dev_init(struct ufs_hba *hba) +{ + int i, retries, err = 0; + bool flag_res = 1; + + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + /* Set the fDeviceInit flag */ + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, NULL); + if (!err || err == -ETIMEDOUT) + break; + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); + } + if (err) { + dev_err(hba->dev, + "%s setting fDeviceInit flag failed with error %d\n", + __func__, err); + goto out; + } + + /* poll for max. 100 iterations for fDeviceInit flag to clear */ + for (i = 0; i < 100 && !err && flag_res; i++) { + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + err = ufshcd_query_flag(hba, + UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, &flag_res); + if (!err || err == -ETIMEDOUT) + break; + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, + err); + } + } + if (err) + dev_err(hba->dev, + "%s reading fDeviceInit flag failed with error %d\n", + __func__, err); + else if (flag_res) + dev_err(hba->dev, + "%s fDeviceInit was not cleared by the device\n", + __func__); + +out: + return err; +} + /** * ufshcd_make_hba_operational - Make UFS controller operational * @hba: per adapter instance * * To bring UFS host controller to operational state, - * 1. Check if device is present - * 2. Configure run-stop-registers - * 3. Enable required interrupts - * 4. Configure interrupt aggregation + * 1. Enable required interrupts + * 2. Configure interrupt aggregation + * 3. Program UTRL and UTMRL base addres + * 4. Configure run-stop-registers * * Returns 0 on success, non-zero value on failure */ @@ -747,18 +2573,30 @@ int err = 0; u32 reg; - /* check if device present */ - reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS)); - if (!ufshcd_is_device_present(reg)) { - dev_err(hba->dev, "cc: Device not present\n"); - err = -ENXIO; - goto out; - } + /* Enable required interrupts */ + ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); + + /* Configure interrupt aggregation */ + if (ufshcd_is_intr_aggr_allowed(hba)) + ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); + else + ufshcd_disable_intr_aggr(hba); + + /* Configure UTRL and UTMRL base address registers */ + ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_H); + ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_H); /* * UCRDY, UTMRLDY and UTRLRDY bits must be 1 * DEI, HEI bits must be 0 */ + reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); if (!(ufshcd_get_lists_status(reg))) { ufshcd_enable_run_stop_reg(hba); } else { @@ -768,23 +2606,6 @@ goto out; } - /* Enable required interrupts */ - hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL | - UIC_ERROR | - UTP_TASK_REQ_COMPL | - DEVICE_FATAL_ERROR | - CONTROLLER_FATAL_ERROR | - SYSTEM_BUS_FATAL_ERROR); - ufshcd_int_config(hba, UFSHCD_INT_ENABLE); - - /* Configure interrupt aggregation */ - ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG); - - if (hba->ufshcd_state == UFSHCD_STATE_RESET) - scsi_unblock_requests(hba->host); - - hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; - scsi_scan_host(hba->host); out: return err; } @@ -822,6 +2643,11 @@ msleep(5); } + /* UniPro link is disabled at this point */ + ufshcd_set_link_off(hba); + + ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); + /* start controller initialization sequence */ ufshcd_hba_start(hba); @@ -849,84 +2675,231 @@ } msleep(5); } + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); + + ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); + return 0; } +static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) +{ + int tx_lanes, i, err = 0; + + if (!peer) + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + else + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + for (i = 0; i < tx_lanes; i++) { + if (!peer) + err = ufshcd_dme_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + else + err = ufshcd_dme_peer_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + if (err) { + dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d", + __func__, peer, i, err); + break; + } + } + + return err; +} + +static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba) +{ + return ufshcd_disable_tx_lcc(hba, true); +} + /** - * ufshcd_initialize_hba - start the initialization process + * ufshcd_link_startup - Initialize unipro link startup * @hba: per adapter instance * - * 1. Enable the controller via ufshcd_hba_enable. - * 2. Program the Transfer Request List Address with the starting address of - * UTRDL. - * 3. Program the Task Management Request List Address with starting address - * of UTMRDL. - * - * Returns 0 on success, non-zero value on failure. + * Returns 0 for success, non-zero in case of failure */ -static int ufshcd_initialize_hba(struct ufs_hba *hba) +static int ufshcd_link_startup(struct ufs_hba *hba) { - if (ufshcd_hba_enable(hba)) - return -EIO; + int ret; + int retries = DME_LINKSTARTUP_RETRIES; - /* Configure UTRL and UTMRL base address registers */ - writel(lower_32_bits(hba->utrdl_dma_addr), - (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); - writel(upper_32_bits(hba->utrdl_dma_addr), - (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H)); - writel(lower_32_bits(hba->utmrdl_dma_addr), - (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L)); - writel(upper_32_bits(hba->utmrdl_dma_addr), - (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H)); + do { + ufshcd_vops_link_startup_notify(hba, PRE_CHANGE); - /* Initialize unipro link startup procedure */ - return ufshcd_dme_link_startup(hba); + ret = ufshcd_dme_link_startup(hba); + + /* check if device is detected by inter-connect layer */ + if (!ret && !ufshcd_is_device_present(hba)) { + dev_err(hba->dev, "%s: Device not present\n", __func__); + ret = -ENXIO; + goto out; + } + + /* + * DME link lost indication is only received when link is up, + * but we can't be sure if the link is up until link startup + * succeeds. So reset the local Uni-Pro and try again. + */ + if (ret && ufshcd_hba_enable(hba)) + goto out; + } while (ret && retries--); + + if (ret) + /* failed to get the link up... retire */ + goto out; + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) { + ret = ufshcd_disable_device_tx_lcc(hba); + if (ret) + goto out; + } + + /* Include any host controller configuration via UIC commands */ + ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE); + if (ret) + goto out; + + ret = ufshcd_make_hba_operational(hba); +out: + if (ret) + dev_err(hba->dev, "link startup failed %d\n", ret); + return ret; } /** - * ufshcd_do_reset - reset the host controller - * @hba: per adapter instance + * ufshcd_verify_dev_init() - Verify device initialization + * @hba: per-adapter instance * - * Returns SUCCESS/FAILED + * Send NOP OUT UPIU and wait for NOP IN response to check whether the + * device Transport Protocol (UTP) layer is ready after a reset. + * If the UTP layer at the device side is not initialized, it may + * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT + * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations. */ -static int ufshcd_do_reset(struct ufs_hba *hba) +static int ufshcd_verify_dev_init(struct ufs_hba *hba) { - struct ufshcd_lrb *lrbp; - unsigned long flags; - int tag; - - /* block commands from midlayer */ - scsi_block_requests(hba->host); + int err = 0; + int retries; - spin_lock_irqsave(hba->host->host_lock, flags); - hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_hold(hba, false); + mutex_lock(&hba->dev_cmd.lock); + for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, + NOP_OUT_TIMEOUT); - /* send controller to reset state */ - ufshcd_hba_stop(hba); - spin_unlock_irqrestore(hba->host->host_lock, flags); + if (!err || err == -ETIMEDOUT) + break; - /* abort outstanding commands */ - for (tag = 0; tag < hba->nutrs; tag++) { - if (test_bit(tag, &hba->outstanding_reqs)) { - lrbp = &hba->lrb[tag]; - scsi_dma_unmap(lrbp->cmd); - lrbp->cmd->result = DID_RESET << 16; - lrbp->cmd->scsi_done(lrbp->cmd); - lrbp->cmd = NULL; - } + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); } + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + + if (err) + dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); + return err; +} + +/** + * ufshcd_set_queue_depth - set lun queue depth + * @sdev: pointer to SCSI device + * + * Read bLUQueueDepth value and activate scsi tagged command + * queueing. For WLUN, queue depth is set to 1. For best-effort + * cases (bLUQueueDepth = 0) the queue depth is set to a maximum + * value that host can queue. + */ +static void ufshcd_set_queue_depth(struct scsi_device *sdev) +{ + int ret = 0; + u8 lun_qdepth; + struct ufs_hba *hba; - /* clear outstanding request/task bit maps */ - hba->outstanding_reqs = 0; - hba->outstanding_tasks = 0; + hba = shost_priv(sdev->host); - /* start the initialization process */ - if (ufshcd_initialize_hba(hba)) { - dev_err(hba->dev, - "Reset: Controller initialization failed\n"); - return FAILED; + lun_qdepth = hba->nutrs; + ret = ufshcd_read_unit_desc_param(hba, + ufshcd_scsi_to_upiu_lun(sdev->lun), + UNIT_DESC_PARAM_LU_Q_DEPTH, + &lun_qdepth, + sizeof(lun_qdepth)); + + /* Some WLUN doesn't support unit descriptor */ + if (ret == -EOPNOTSUPP) + lun_qdepth = 1; + else if (!lun_qdepth) + /* eventually, we can figure out the real queue depth */ + lun_qdepth = hba->nutrs; + else + lun_qdepth = min_t(int, lun_qdepth, hba->nutrs); + + dev_dbg(hba->dev, "%s: activate tcq with queue depth %d\n", + __func__, lun_qdepth); + scsi_change_queue_depth(sdev, lun_qdepth); +} + +/* + * ufshcd_get_lu_wp - returns the "b_lu_write_protect" from UNIT DESCRIPTOR + * @hba: per-adapter instance + * @lun: UFS device lun id + * @b_lu_write_protect: pointer to buffer to hold the LU's write protect info + * + * Returns 0 in case of success and b_lu_write_protect status would be returned + * @b_lu_write_protect parameter. + * Returns -ENOTSUPP if reading b_lu_write_protect is not supported. + * Returns -EINVAL in case of invalid parameters passed to this function. + */ +static int ufshcd_get_lu_wp(struct ufs_hba *hba, + u8 lun, + u8 *b_lu_write_protect) +{ + int ret; + + if (!b_lu_write_protect) + ret = -EINVAL; + /* + * According to UFS device spec, RPMB LU can't be write + * protected so skip reading bLUWriteProtect parameter for + * it. For other W-LUs, UNIT DESCRIPTOR is not available. + */ + else if (lun >= UFS_UPIU_MAX_GENERAL_LUN) + ret = -ENOTSUPP; + else + ret = ufshcd_read_unit_desc_param(hba, + lun, + UNIT_DESC_PARAM_LU_WR_PROTECT, + b_lu_write_protect, + sizeof(*b_lu_write_protect)); + return ret; +} + +/** + * ufshcd_get_lu_power_on_wp_status - get LU's power on write protect + * status + * @hba: per-adapter instance + * @sdev: pointer to SCSI device + * + */ +static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, + struct scsi_device *sdev) +{ + if (hba->dev_info.f_power_on_wp_en && + !hba->dev_info.is_lu_power_on_wp) { + u8 b_lu_write_protect; + + if (!ufshcd_get_lu_wp(hba, ufshcd_scsi_to_upiu_lun(sdev->lun), + &b_lu_write_protect) && + (b_lu_write_protect == UFS_LU_POWER_ON_WP)) + hba->dev_info.is_lu_power_on_wp = true; } - return SUCCESS; } /** @@ -940,20 +2913,51 @@ struct ufs_hba *hba; hba = shost_priv(sdev->host); - sdev->tagged_supported = 1; /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ sdev->use_10_for_ms = 1; - scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); - /* - * Inform SCSI Midlayer that the LUN queue depth is same as the - * controller queue depth. If a LUN queue depth is less than the - * controller queue depth and if the LUN reports - * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted - * with scsi_adjust_queue_depth. - */ - scsi_activate_tcq(sdev, hba->nutrs); + /* allow SCSI layer to restart the device in case of errors */ + sdev->allow_restart = 1; + + /* REPORT SUPPORTED OPERATION CODES is not supported */ + sdev->no_report_opcodes = 1; + + + ufshcd_set_queue_depth(sdev); + + ufshcd_get_lu_power_on_wp_status(hba, sdev); + + return 0; +} + +/** + * ufshcd_change_queue_depth - change queue depth + * @sdev: pointer to SCSI device + * @depth: required depth to set + * + * Change queue depth and make sure the max. limits are not crossed. + */ +static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth) +{ + struct ufs_hba *hba = shost_priv(sdev->host); + + if (depth > hba->nutrs) + depth = hba->nutrs; + return scsi_change_queue_depth(sdev, depth); +} + +/** + * ufshcd_slave_configure - adjust SCSI device configurations + * @sdev: pointer to SCSI device + */ +static int ufshcd_slave_configure(struct scsi_device *sdev) +{ + struct request_queue *q = sdev->request_queue; + + blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1); + blk_queue_max_segment_size(q, PRDT_DATA_BYTE_COUNT_MAX); + return 0; } @@ -966,17 +2970,25 @@ struct ufs_hba *hba; hba = shost_priv(sdev->host); - scsi_deactivate_tcq(sdev, hba->nutrs); + /* Drop the reference as it won't be needed anymore */ + if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->sdev_ufs_device = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + } } /** * ufshcd_task_req_compl - handle task management request completion * @hba: per adapter instance * @index: index of the completed request + * @resp: task management service response * - * Returns SUCCESS/FAILED + * Returns non-zero value on error, zero on success */ -static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index) +static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index, u8 *resp) { struct utp_task_req_desc *task_req_descp; struct utp_upiu_task_rsp *task_rsp_upiup; @@ -997,55 +3009,15 @@ task_req_descp[index].task_rsp_upiu; task_result = be32_to_cpu(task_rsp_upiup->header.dword_1); task_result = ((task_result & MASK_TASK_RESPONSE) >> 8); - - if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL && - task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) - task_result = FAILED; - else - task_result = SUCCESS; + if (resp) + *resp = (u8)task_result; } else { - task_result = FAILED; - dev_err(hba->dev, - "trc: Invalid ocs = %x\n", ocs_value); + dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", + __func__, ocs_value); } spin_unlock_irqrestore(hba->host->host_lock, flags); - return task_result; -} - -/** - * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with - * SAM_STAT_TASK_SET_FULL SCSI command status. - * @cmd: pointer to SCSI command - */ -static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd) -{ - struct ufs_hba *hba; - int i; - int lun_qdepth = 0; - - hba = shost_priv(cmd->device->host); - - /* - * LUN queue depth can be obtained by counting outstanding commands - * on the LUN. - */ - for (i = 0; i < hba->nutrs; i++) { - if (test_bit(i, &hba->outstanding_reqs)) { - - /* - * Check if the outstanding command belongs - * to the LUN which reported SAM_STAT_TASK_SET_FULL. - */ - if (cmd->device->lun == hba->lrb[i].lun) - lun_qdepth++; - } - } - /* - * LUN queue depth will be total outstanding commands, except the - * command for which the LUN reported SAM_STAT_TASK_SET_FULL. - */ - scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1); + return ocs_value; } /** @@ -1061,32 +3033,18 @@ int result = 0; switch (scsi_status) { - case SAM_STAT_GOOD: - result |= DID_OK << 16 | - COMMAND_COMPLETE << 8 | - SAM_STAT_GOOD; - break; case SAM_STAT_CHECK_CONDITION: + ufshcd_copy_sense_data(lrbp); + case SAM_STAT_GOOD: result |= DID_OK << 16 | COMMAND_COMPLETE << 8 | - SAM_STAT_CHECK_CONDITION; - ufshcd_copy_sense_data(lrbp); - break; - case SAM_STAT_BUSY: - result |= SAM_STAT_BUSY; + scsi_status; break; case SAM_STAT_TASK_SET_FULL: - - /* - * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue - * depth needs to be adjusted to the exact number of - * outstanding commands the LUN can handle at any given time. - */ - ufshcd_adjust_lun_qdepth(lrbp->cmd); - result |= SAM_STAT_TASK_SET_FULL; - break; + case SAM_STAT_BUSY: case SAM_STAT_TASK_ABORTED: - result |= SAM_STAT_TASK_ABORTED; + ufshcd_copy_sense_data(lrbp); + result |= scsi_status; break; default: result |= DID_ERROR << 16; @@ -1115,31 +3073,46 @@ switch (ocs) { case OCS_SUCCESS: + result = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + + switch (result) { + case UPIU_TRANSACTION_RESPONSE: + /* + * get the response UPIU result to extract + * the SCSI command status + */ + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); + + /* + * get the result based on SCSI status response + * to notify the SCSI midlayer of the command status + */ + scsi_status = result & MASK_SCSI_STATUS; + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); - /* check if the returned transfer response is valid */ - result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr); - if (result) { + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) + schedule_work(&hba->eeh_work); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + result = DID_ERROR << 16; dev_err(hba->dev, - "Invalid response = %x\n", result); + "Reject UPIU not fully implemented\n"); + break; + default: + result = DID_ERROR << 16; + dev_err(hba->dev, + "Unexpected request response code = %x\n", + result); break; } - - /* - * get the response UPIU result to extract - * the SCSI command status - */ - result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); - - /* - * get the result based on SCSI status response - * to notify the SCSI midlayer of the command status - */ - scsi_status = result & MASK_SCSI_STATUS; - result = ufshcd_scsi_cmd_status(lrbp, scsi_status); break; case OCS_ABORTED: result |= DID_ABORT << 16; break; + case OCS_INVALID_COMMAND_STATUS: + result |= DID_REQUEUE << 16; + break; case OCS_INVALID_CMD_TABLE_ATTR: case OCS_INVALID_PRDT_ATTR: case OCS_MISMATCH_DATA_BUF_SIZE: @@ -1157,103 +3130,475 @@ } /** + * ufshcd_uic_cmd_compl - handle completion of uic command + * @hba: per adapter instance + * @intr_status: interrupt status generated by the controller + */ +static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) +{ + if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) { + hba->active_uic_cmd->argument2 |= + ufshcd_get_uic_cmd_result(hba); + hba->active_uic_cmd->argument3 = + ufshcd_get_dme_attr_val(hba); + complete(&hba->active_uic_cmd->done); + } + + if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) + complete(hba->uic_async_done); +} + +/** * ufshcd_transfer_req_compl - handle SCSI and query command completion * @hba: per adapter instance */ static void ufshcd_transfer_req_compl(struct ufs_hba *hba) { - struct ufshcd_lrb *lrb; + struct ufshcd_lrb *lrbp; + struct scsi_cmnd *cmd; unsigned long completed_reqs; u32 tr_doorbell; int result; int index; - lrb = hba->lrb; - tr_doorbell = - readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL); + /* Resetting interrupt aggregation counters first and reading the + * DOOR_BELL afterward allows us to handle all the completed requests. + * In order to prevent other interrupts starvation the DB is read once + * after reset. The down side of this solution is the possibility of + * false interrupt if device completes another request after resetting + * aggregation and before reading the DB. + */ + if (ufshcd_is_intr_aggr_allowed(hba)) + ufshcd_reset_intr_aggr(hba); + + tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); completed_reqs = tr_doorbell ^ hba->outstanding_reqs; - for (index = 0; index < hba->nutrs; index++) { - if (test_bit(index, &completed_reqs)) { + for_each_set_bit(index, &completed_reqs, hba->nutrs) { + lrbp = &hba->lrb[index]; + cmd = lrbp->cmd; + if (cmd) { + result = ufshcd_transfer_rsp_status(hba, lrbp); + scsi_dma_unmap(cmd); + cmd->result = result; + /* Mark completed command as NULL in LRB */ + lrbp->cmd = NULL; + clear_bit_unlock(index, &hba->lrb_in_use); + /* Do not touch lrbp after scsi done */ + cmd->scsi_done(cmd); + __ufshcd_release(hba); + } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) { + if (hba->dev_cmd.complete) + complete(hba->dev_cmd.complete); + } + } - result = ufshcd_transfer_rsp_status(hba, &lrb[index]); + /* clear corresponding bits of completed commands */ + hba->outstanding_reqs ^= completed_reqs; - if (lrb[index].cmd) { - scsi_dma_unmap(lrb[index].cmd); - lrb[index].cmd->result = result; - lrb[index].cmd->scsi_done(lrb[index].cmd); + ufshcd_clk_scaling_update_busy(hba); - /* Mark completed command as NULL in LRB */ - lrb[index].cmd = NULL; - } - } /* end of if */ - } /* end of for */ + /* we might have free'd some tags above */ + wake_up(&hba->dev_cmd.tag_wq); +} - /* clear corresponding bits of completed commands */ - hba->outstanding_reqs ^= completed_reqs; +/** + * ufshcd_disable_ee - disable exception event + * @hba: per-adapter instance + * @mask: exception event to disable + * + * Disables exception event in the device so that the EVENT_ALERT + * bit is not set. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_disable_ee(struct ufs_hba *hba, u16 mask) +{ + int err = 0; + u32 val; - /* Reset interrupt aggregation counters */ - ufshcd_config_int_aggr(hba, INT_AGGR_RESET); + if (!(hba->ee_ctrl_mask & mask)) + goto out; + + val = hba->ee_ctrl_mask & ~mask; + val &= 0xFFFF; /* 2 bytes */ + err = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val); + if (!err) + hba->ee_ctrl_mask &= ~mask; +out: + return err; } /** - * ufshcd_uic_cc_handler - handle UIC command completion - * @work: pointer to a work queue structure + * ufshcd_enable_ee - enable exception event + * @hba: per-adapter instance + * @mask: exception event to enable * - * Returns 0 on success, non-zero value on failure + * Enable corresponding exception event in the device to allow + * device to alert host in critical scenarios. + * + * Returns zero on success, non-zero error value on failure. */ -static void ufshcd_uic_cc_handler (struct work_struct *work) +static int ufshcd_enable_ee(struct ufs_hba *hba, u16 mask) { - struct ufs_hba *hba; + int err = 0; + u32 val; + + if (hba->ee_ctrl_mask & mask) + goto out; + + val = hba->ee_ctrl_mask | mask; + val &= 0xFFFF; /* 2 bytes */ + err = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val); + if (!err) + hba->ee_ctrl_mask |= mask; +out: + return err; +} - hba = container_of(work, struct ufs_hba, uic_workq); +/** + * ufshcd_enable_auto_bkops - Allow device managed BKOPS + * @hba: per-adapter instance + * + * Allow device to manage background operations on its own. Enabling + * this might lead to inconsistent latencies during normal data transfers + * as the device is allowed to manage its own way of handling background + * operations. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_enable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; - if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) && - !(ufshcd_get_uic_cmd_result(hba))) { + if (hba->auto_bkops_enabled) + goto out; - if (ufshcd_make_hba_operational(hba)) - dev_err(hba->dev, - "cc: hba not operational state\n"); - return; + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to enable bkops %d\n", + __func__, err); + goto out; } + + hba->auto_bkops_enabled = true; + + /* No need of URGENT_BKOPS exception from the device */ + err = ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) + dev_err(hba->dev, "%s: failed to disable exception event %d\n", + __func__, err); +out: + return err; +} + +/** + * ufshcd_disable_auto_bkops - block device in doing background operations + * @hba: per-adapter instance + * + * Disabling background operations improves command response latency but + * has drawback of device moving into critical state where the device is + * not-operable. Make sure to call ufshcd_enable_auto_bkops() whenever the + * host is idle so that BKOPS are managed effectively without any negative + * impacts. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_disable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; + + if (!hba->auto_bkops_enabled) + goto out; + + /* + * If host assisted BKOPs is to be enabled, make sure + * urgent bkops exception is allowed. + */ + err = ufshcd_enable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) { + dev_err(hba->dev, "%s: failed to enable exception event %d\n", + __func__, err); + goto out; + } + + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to disable bkops %d\n", + __func__, err); + ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + goto out; + } + + hba->auto_bkops_enabled = false; +out: + return err; } /** - * ufshcd_fatal_err_handler - handle fatal errors + * ufshcd_force_reset_auto_bkops - force enable of auto bkops * @hba: per adapter instance + * + * After a device reset the device may toggle the BKOPS_EN flag + * to default value. The s/w tracking variables should be updated + * as well. Do this by forcing enable of auto bkops. + */ +static void ufshcd_force_reset_auto_bkops(struct ufs_hba *hba) +{ + hba->auto_bkops_enabled = false; + hba->ee_ctrl_mask |= MASK_EE_URGENT_BKOPS; + ufshcd_enable_auto_bkops(hba); +} + +static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_BKOPS_STATUS, 0, 0, status); +} + +/** + * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status + * @hba: per-adapter instance + * @status: bkops_status value + * + * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn + * flag in the device to permit background operations if the device + * bkops_status is greater than or equal to "status" argument passed to + * this function, disable otherwise. + * + * Returns 0 for success, non-zero in case of failure. + * + * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag + * to know whether auto bkops is enabled or disabled after this function + * returns control to it. + */ +static int ufshcd_bkops_ctrl(struct ufs_hba *hba, + enum bkops_status status) +{ + int err; + u32 curr_status = 0; + + err = ufshcd_get_bkops_status(hba, &curr_status); + if (err) { + dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", + __func__, err); + goto out; + } else if (curr_status > BKOPS_STATUS_MAX) { + dev_err(hba->dev, "%s: invalid BKOPS status %d\n", + __func__, curr_status); + err = -EINVAL; + goto out; + } + + if (curr_status >= status) + err = ufshcd_enable_auto_bkops(hba); + else + err = ufshcd_disable_auto_bkops(hba); +out: + return err; +} + +/** + * ufshcd_urgent_bkops - handle urgent bkops exception event + * @hba: per-adapter instance + * + * Enable fBackgroundOpsEn flag in the device to permit background + * operations. + * + * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled + * and negative error value for any other failure. */ -static void ufshcd_fatal_err_handler(struct work_struct *work) +static int ufshcd_urgent_bkops(struct ufs_hba *hba) +{ + return ufshcd_bkops_ctrl(hba, BKOPS_STATUS_PERF_IMPACT); +} + +static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_EE_STATUS, 0, 0, status); +} + +/** + * ufshcd_exception_event_handler - handle exceptions raised by device + * @work: pointer to work data + * + * Read bExceptionEventStatus attribute from the device and handle the + * exception event accordingly. + */ +static void ufshcd_exception_event_handler(struct work_struct *work) { struct ufs_hba *hba; - hba = container_of(work, struct ufs_hba, feh_workq); + int err; + u32 status = 0; + hba = container_of(work, struct ufs_hba, eeh_work); - /* check if reset is already in progress */ - if (hba->ufshcd_state != UFSHCD_STATE_RESET) - ufshcd_do_reset(hba); + pm_runtime_get_sync(hba->dev); + err = ufshcd_get_ee_status(hba, &status); + if (err) { + dev_err(hba->dev, "%s: failed to get exception status %d\n", + __func__, err); + goto out; + } + + status &= hba->ee_ctrl_mask; + if (status & MASK_EE_URGENT_BKOPS) { + err = ufshcd_urgent_bkops(hba); + if (err < 0) + dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n", + __func__, err); + } +out: + pm_runtime_put_sync(hba->dev); + return; } /** - * ufshcd_err_handler - Check for fatal errors - * @work: pointer to a work queue structure + * ufshcd_err_handler - handle UFS errors that require s/w attention + * @work: pointer to work structure */ -static void ufshcd_err_handler(struct ufs_hba *hba) +static void ufshcd_err_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + unsigned long flags; + u32 err_xfer = 0; + u32 err_tm = 0; + int err = 0; + int tag; + + hba = container_of(work, struct ufs_hba, eh_work); + + pm_runtime_get_sync(hba->dev); + ufshcd_hold(hba, false); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->ufshcd_state == UFSHCD_STATE_RESET) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + goto out; + } + + hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_set_eh_in_progress(hba); + + /* Complete requests that have door-bell cleared by h/w */ + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Clear pending transfer requests */ + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) + if (ufshcd_clear_cmd(hba, tag)) + err_xfer |= 1 << tag; + + /* Clear pending task management requests */ + for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) + if (ufshcd_clear_tm_cmd(hba, tag)) + err_tm |= 1 << tag; + + /* Complete the requests that are cleared by s/w */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Fatal errors need reset */ + if (err_xfer || err_tm || (hba->saved_err & INT_FATAL_ERRORS) || + ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR))) { + err = ufshcd_reset_and_restore(hba); + if (err) { + dev_err(hba->dev, "%s: reset and restore failed\n", + __func__); + hba->ufshcd_state = UFSHCD_STATE_ERROR; + } + /* + * Inform scsi mid-layer that we did reset and allow to handle + * Unit Attention properly. + */ + scsi_report_bus_reset(hba->host, 0); + hba->saved_err = 0; + hba->saved_uic_err = 0; + } + ufshcd_clear_eh_in_progress(hba); + +out: + scsi_unblock_requests(hba->host); + ufshcd_release(hba); + pm_runtime_put_sync(hba->dev); +} + +/** + * ufshcd_update_uic_error - check and set fatal UIC error flags. + * @hba: per-adapter instance + */ +static void ufshcd_update_uic_error(struct ufs_hba *hba) { u32 reg; + /* PA_INIT_ERROR is fatal and needs UIC reset */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER); + if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) + hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR; + + /* UIC NL/TL/DME errors needs software retry */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER); + if (reg) + hba->uic_error |= UFSHCD_UIC_NL_ERROR; + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER); + if (reg) + hba->uic_error |= UFSHCD_UIC_TL_ERROR; + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME); + if (reg) + hba->uic_error |= UFSHCD_UIC_DME_ERROR; + + dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n", + __func__, hba->uic_error); +} + +/** + * ufshcd_check_errors - Check for errors that need s/w attention + * @hba: per-adapter instance + */ +static void ufshcd_check_errors(struct ufs_hba *hba) +{ + bool queue_eh_work = false; + if (hba->errors & INT_FATAL_ERRORS) - goto fatal_eh; + queue_eh_work = true; if (hba->errors & UIC_ERROR) { + hba->uic_error = 0; + ufshcd_update_uic_error(hba); + if (hba->uic_error) + queue_eh_work = true; + } + + if (queue_eh_work) { + /* handle fatal errors only when link is functional */ + if (hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL) { + /* block commands from scsi mid-layer */ + scsi_block_requests(hba->host); + + /* transfer error masks to sticky bits */ + hba->saved_err |= hba->errors; + hba->saved_uic_err |= hba->uic_error; - reg = readl(hba->mmio_base + - REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); - if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) - goto fatal_eh; + hba->ufshcd_state = UFSHCD_STATE_ERROR; + schedule_work(&hba->eh_work); + } } - return; -fatal_eh: - hba->ufshcd_state = UFSHCD_STATE_ERROR; - schedule_work(&hba->feh_workq); + /* + * if (!queue_eh_work) - + * Other errors are either non-fatal where host recovers + * itself without s/w intervention or errors that will be + * handled by the SCSI core layer. + */ } /** @@ -1264,9 +3609,9 @@ { u32 tm_doorbell; - tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL); + tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks; - wake_up_interruptible(&hba->ufshcd_tm_wait_queue); + wake_up(&hba->tm_wq); } /** @@ -1278,10 +3623,10 @@ { hba->errors = UFSHCD_ERROR_MASK & intr_status; if (hba->errors) - ufshcd_err_handler(hba); + ufshcd_check_errors(hba); - if (intr_status & UIC_COMMAND_COMPL) - schedule_work(&hba->uic_workq); + if (intr_status & UFSHCD_UIC_MASK) + ufshcd_uic_cmd_compl(hba, intr_status); if (intr_status & UTP_TASK_REQ_COMPL) ufshcd_tmc_handler(hba); @@ -1305,53 +3650,70 @@ struct ufs_hba *hba = __hba; spin_lock(hba->host->host_lock); - intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS); + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); if (intr_status) { + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); ufshcd_sl_intr(hba, intr_status); - - /* If UFSHCI 1.0 then clear interrupt status register */ - if (hba->ufs_version == UFSHCI_VERSION_10) - writel(intr_status, - (hba->mmio_base + REG_INTERRUPT_STATUS)); retval = IRQ_HANDLED; } spin_unlock(hba->host->host_lock); return retval; } +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) +{ + int err = 0; + u32 mask = 1 << tag; + unsigned long flags; + + if (!test_bit(tag, &hba->outstanding_tasks)) + goto out; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* poll for max. 1 sec to clear door bell register by h/w */ + err = ufshcd_wait_for_register(hba, + REG_UTP_TASK_REQ_DOOR_BELL, + mask, 0, 1000, 1000); +out: + return err; +} + /** * ufshcd_issue_tm_cmd - issues task management commands to controller * @hba: per adapter instance - * @lrbp: pointer to local reference block + * @lun_id: LUN ID to which TM command is sent + * @task_id: task ID to which the TM command is applicable + * @tm_function: task management function opcode + * @tm_response: task management service response return value * - * Returns SUCCESS/FAILED + * Returns non-zero value on error, zero on success. */ -static int -ufshcd_issue_tm_cmd(struct ufs_hba *hba, - struct ufshcd_lrb *lrbp, - u8 tm_function) +static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id, + u8 tm_function, u8 *tm_response) { struct utp_task_req_desc *task_req_descp; struct utp_upiu_task_req *task_req_upiup; struct Scsi_Host *host; unsigned long flags; - int free_slot = 0; + int free_slot; int err; + int task_tag; host = hba->host; - spin_lock_irqsave(host->host_lock, flags); - - /* If task management queue is full */ - free_slot = ufshcd_get_tm_free_slot(hba); - if (free_slot >= hba->nutmrs) { - spin_unlock_irqrestore(host->host_lock, flags); - dev_err(hba->dev, "Task management queue full\n"); - err = FAILED; - goto out; - } + /* + * Get free slot, sleep if slots are unavailable. + * Even though we use wait_event() which sleeps indefinitely, + * the maximum wait time is bounded by %TM_CMD_TIMEOUT. + */ + wait_event(hba->tm_tag_wq, ufshcd_get_tm_free_slot(hba, &free_slot)); + ufshcd_hold(hba, false); + spin_lock_irqsave(host->host_lock, flags); task_req_descp = hba->utmrdl_base_addr; task_req_descp += free_slot; @@ -1363,150 +3725,611 @@ /* Configure task request UPIU */ task_req_upiup = (struct utp_upiu_task_req *) task_req_descp->task_req_upiu; + task_tag = hba->nutrs + free_slot; task_req_upiup->header.dword_0 = - cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0, - lrbp->lun, lrbp->task_tag)); + UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0, + lun_id, task_tag); task_req_upiup->header.dword_1 = - cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0)); - - task_req_upiup->input_param1 = lrbp->lun; - task_req_upiup->input_param1 = - cpu_to_be32(task_req_upiup->input_param1); - task_req_upiup->input_param2 = lrbp->task_tag; - task_req_upiup->input_param2 = - cpu_to_be32(task_req_upiup->input_param2); + UPIU_HEADER_DWORD(0, tm_function, 0, 0); + /* + * The host shall provide the same value for LUN field in the basic + * header and for Input Parameter. + */ + task_req_upiup->input_param1 = cpu_to_be32(lun_id); + task_req_upiup->input_param2 = cpu_to_be32(task_id); /* send command to the controller */ __set_bit(free_slot, &hba->outstanding_tasks); - writel((1 << free_slot), - (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL)); + ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL); spin_unlock_irqrestore(host->host_lock, flags); /* wait until the task management command is completed */ - err = - wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue, - (test_bit(free_slot, - &hba->tm_condition) != 0), - 60 * HZ); + err = wait_event_timeout(hba->tm_wq, + test_bit(free_slot, &hba->tm_condition), + msecs_to_jiffies(TM_CMD_TIMEOUT)); if (!err) { - dev_err(hba->dev, - "Task management command timed-out\n"); - err = FAILED; - goto out; + dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n", + __func__, tm_function); + if (ufshcd_clear_tm_cmd(hba, free_slot)) + dev_WARN(hba->dev, "%s: unable clear tm cmd (slot %d) after timeout\n", + __func__, free_slot); + err = -ETIMEDOUT; + } else { + err = ufshcd_task_req_compl(hba, free_slot, tm_response); } + clear_bit(free_slot, &hba->tm_condition); - err = ufshcd_task_req_compl(hba, free_slot); -out: + ufshcd_put_tm_slot(hba, free_slot); + wake_up(&hba->tm_tag_wq); + + ufshcd_release(hba); return err; } /** - * ufshcd_device_reset - reset device and abort all the pending commands + * ufshcd_eh_device_reset_handler - device reset handler registered to + * scsi layer. * @cmd: SCSI command pointer * * Returns SUCCESS/FAILED */ -static int ufshcd_device_reset(struct scsi_cmnd *cmd) +static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) { struct Scsi_Host *host; struct ufs_hba *hba; unsigned int tag; u32 pos; int err; + u8 resp = 0xF; + struct ufshcd_lrb *lrbp; + unsigned long flags; host = cmd->device->host; hba = shost_priv(host); tag = cmd->request->tag; - err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET); - if (err == FAILED) + lrbp = &hba->lrb[tag]; + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) + err = resp; goto out; + } - for (pos = 0; pos < hba->nutrs; pos++) { - if (test_bit(pos, &hba->outstanding_reqs) && - (hba->lrb[tag].lun == hba->lrb[pos].lun)) { + /* clear the commands that were pending for corresponding LUN */ + for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) { + if (hba->lrb[pos].lun == lrbp->lun) { + err = ufshcd_clear_cmd(hba, pos); + if (err) + break; + } + } + spin_lock_irqsave(host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + spin_unlock_irqrestore(host->host_lock, flags); +out: + if (!err) { + err = SUCCESS; + } else { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + err = FAILED; + } + return err; +} - /* clear the respective UTRLCLR register bit */ - ufshcd_utrl_clear(hba, pos); +/** + * ufshcd_abort - abort a specific command + * @cmd: SCSI command pointer + * + * Abort the pending command in device by sending UFS_ABORT_TASK task management + * command, and in host controller by clearing the door-bell register. There can + * be race between controller sending the command to the device while abort is + * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is + * really issued and then try to abort it. + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned long flags; + unsigned int tag; + int err = 0; + int poll_cnt; + u8 resp = 0xF; + struct ufshcd_lrb *lrbp; + u32 reg; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + ufshcd_hold(hba, false); + /* If command is already aborted/completed, return SUCCESS */ + if (!(test_bit(tag, &hba->outstanding_reqs))) + goto out; - clear_bit(pos, &hba->outstanding_reqs); + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + if (!(reg & (1 << tag))) { + dev_err(hba->dev, + "%s: cmd was completed, but without a notifying intr, tag = %d", + __func__, tag); + } - if (hba->lrb[pos].cmd) { - scsi_dma_unmap(hba->lrb[pos].cmd); - hba->lrb[pos].cmd->result = - DID_ABORT << 16; - hba->lrb[pos].cmd->scsi_done(cmd); - hba->lrb[pos].cmd = NULL; + lrbp = &hba->lrb[tag]; + for (poll_cnt = 100; poll_cnt; poll_cnt--) { + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_QUERY_TASK, &resp); + if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) { + /* cmd pending in the device */ + break; + } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + /* + * cmd not pending in the device, check if it is + * in transition. + */ + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + if (reg & (1 << tag)) { + /* sleep for max. 200us to stabilize */ + usleep_range(100, 200); + continue; } + /* command completed already */ + goto out; + } else { + if (!err) + err = resp; /* service response error */ + goto out; } - } /* end of for */ + } + + if (!poll_cnt) { + err = -EBUSY; + goto out; + } + + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_ABORT_TASK, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) + err = resp; /* service response error */ + goto out; + } + + err = ufshcd_clear_cmd(hba, tag); + if (err) + goto out; + + scsi_dma_unmap(cmd); + + spin_lock_irqsave(host->host_lock, flags); + __clear_bit(tag, &hba->outstanding_reqs); + hba->lrb[tag].cmd = NULL; + spin_unlock_irqrestore(host->host_lock, flags); + + clear_bit_unlock(tag, &hba->lrb_in_use); + wake_up(&hba->dev_cmd.tag_wq); + out: + if (!err) { + err = SUCCESS; + } else { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + err = FAILED; + } + + /* + * This ufshcd_release() corresponds to the original scsi cmd that got + * aborted here (as we won't get any IRQ for it). + */ + ufshcd_release(hba); return err; } /** - * ufshcd_host_reset - Main reset function registered with scsi layer - * @cmd: SCSI command pointer + * ufshcd_host_reset_and_restore - reset and restore host controller + * @hba: per-adapter instance * - * Returns SUCCESS/FAILED + * Note that host controller reset may issue DME_RESET to + * local and remote (device) Uni-Pro stack and the attributes + * are reset to default state. + * + * Returns zero on success, non-zero on failure */ -static int ufshcd_host_reset(struct scsi_cmnd *cmd) +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) { - struct ufs_hba *hba; + int err; + unsigned long flags; - hba = shost_priv(cmd->device->host); + /* Reset the host controller */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_hba_stop(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_hba_enable(hba); + if (err) + goto out; - if (hba->ufshcd_state == UFSHCD_STATE_RESET) - return SUCCESS; + /* Establish the link again and restore the device */ + err = ufshcd_probe_hba(hba); + + if (!err && (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)) + err = -EIO; +out: + if (err) + dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); - return ufshcd_do_reset(hba); + return err; } /** - * ufshcd_abort - abort a specific command - * @cmd: SCSI command pointer + * ufshcd_reset_and_restore - reset and re-initialize host/device + * @hba: per-adapter instance * - * Returns SUCCESS/FAILED + * Reset and recover device, host and re-establish link. This + * is helpful to recover the communication in fatal error conditions. + * + * Returns zero on success, non-zero on failure */ -static int ufshcd_abort(struct scsi_cmnd *cmd) +static int ufshcd_reset_and_restore(struct ufs_hba *hba) { - struct Scsi_Host *host; - struct ufs_hba *hba; + int err = 0; unsigned long flags; - unsigned int tag; + int retries = MAX_HOST_RESET_RETRIES; + + do { + err = ufshcd_host_reset_and_restore(hba); + } while (err && --retries); + + /* + * After reset the door-bell might be cleared, complete + * outstanding requests in s/w here. + */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return err; +} + +/** + * ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer + * @cmd - SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) +{ int err; + unsigned long flags; + struct ufs_hba *hba; - host = cmd->device->host; - hba = shost_priv(host); - tag = cmd->request->tag; + hba = shost_priv(cmd->device->host); - spin_lock_irqsave(host->host_lock, flags); + ufshcd_hold(hba, false); + /* + * Check if there is any race with fatal error handling. + * If so, wait for it to complete. Even though fatal error + * handling does reset and restore in some cases, don't assume + * anything out of it. We are just avoiding race here. + */ + do { + spin_lock_irqsave(hba->host->host_lock, flags); + if (!(work_pending(&hba->eh_work) || + hba->ufshcd_state == UFSHCD_STATE_RESET)) + break; + spin_unlock_irqrestore(hba->host->host_lock, flags); + dev_dbg(hba->dev, "%s: reset in progress\n", __func__); + flush_work(&hba->eh_work); + } while (1); + + hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_set_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); - /* check if command is still pending */ - if (!(test_bit(tag, &hba->outstanding_reqs))) { + err = ufshcd_reset_and_restore(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (!err) { + err = SUCCESS; + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + } else { err = FAILED; - spin_unlock_irqrestore(host->host_lock, flags); + hba->ufshcd_state = UFSHCD_STATE_ERROR; + } + ufshcd_clear_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_get_max_icc_level - calculate the ICC level + * @sup_curr_uA: max. current supported by the regulator + * @start_scan: row at the desc table to start scan from + * @buff: power descriptor buffer + * + * Returns calculated max ICC level for specific regulator + */ +static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan, char *buff) +{ + int i; + int curr_uA; + u16 data; + u16 unit; + + for (i = start_scan; i >= 0; i--) { + data = be16_to_cpu(*((u16 *)(buff + 2*i))); + unit = (data & ATTR_ICC_LVL_UNIT_MASK) >> + ATTR_ICC_LVL_UNIT_OFFSET; + curr_uA = data & ATTR_ICC_LVL_VALUE_MASK; + switch (unit) { + case UFSHCD_NANO_AMP: + curr_uA = curr_uA / 1000; + break; + case UFSHCD_MILI_AMP: + curr_uA = curr_uA * 1000; + break; + case UFSHCD_AMP: + curr_uA = curr_uA * 1000 * 1000; + break; + case UFSHCD_MICRO_AMP: + default: + break; + } + if (sup_curr_uA >= curr_uA) + break; + } + if (i < 0) { + i = 0; + pr_err("%s: Couldn't find valid icc_level = %d", __func__, i); + } + + return (u32)i; +} + +/** + * ufshcd_calc_icc_level - calculate the max ICC level + * In case regulators are not initialized we'll return 0 + * @hba: per-adapter instance + * @desc_buf: power descriptor buffer to extract ICC levels from. + * @len: length of desc_buff + * + * Returns calculated ICC level + */ +static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, + u8 *desc_buf, int len) +{ + u32 icc_level = 0; + + if (!hba->vreg_info.vcc || !hba->vreg_info.vccq || + !hba->vreg_info.vccq2) { + dev_err(hba->dev, + "%s: Regulator capability was not set, actvIccLevel=%d", + __func__, icc_level); goto out; } - spin_unlock_irqrestore(host->host_lock, flags); - err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK); - if (err == FAILED) + if (hba->vreg_info.vcc) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vcc->max_uA, + POWER_DESC_MAX_ACTV_ICC_LVLS - 1, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]); + + if (hba->vreg_info.vccq) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vccq->max_uA, + icc_level, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]); + + if (hba->vreg_info.vccq2) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vccq2->max_uA, + icc_level, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ2_0]); +out: + return icc_level; +} + +static void ufshcd_init_icc_levels(struct ufs_hba *hba) +{ + int ret; + int buff_len = QUERY_DESC_POWER_MAX_SIZE; + u8 desc_buf[QUERY_DESC_POWER_MAX_SIZE]; + + ret = ufshcd_read_power_desc(hba, desc_buf, buff_len); + if (ret) { + dev_err(hba->dev, + "%s: Failed reading power descriptor.len = %d ret = %d", + __func__, buff_len, ret); + return; + } + + hba->init_prefetch_data.icc_level = + ufshcd_find_max_sup_active_icc_level(hba, + desc_buf, buff_len); + dev_dbg(hba->dev, "%s: setting icc_level 0x%x", + __func__, hba->init_prefetch_data.icc_level); + + ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, + &hba->init_prefetch_data.icc_level); + + if (ret) + dev_err(hba->dev, + "%s: Failed configuring bActiveICCLevel = %d ret = %d", + __func__, hba->init_prefetch_data.icc_level , ret); + +} + +/** + * ufshcd_scsi_add_wlus - Adds required W-LUs + * @hba: per-adapter instance + * + * UFS device specification requires the UFS devices to support 4 well known + * logical units: + * "REPORT_LUNS" (address: 01h) + * "UFS Device" (address: 50h) + * "RPMB" (address: 44h) + * "BOOT" (address: 30h) + * UFS device's power management needs to be controlled by "POWER CONDITION" + * field of SSU (START STOP UNIT) command. But this "power condition" field + * will take effect only when its sent to "UFS device" well known logical unit + * hence we require the scsi_device instance to represent this logical unit in + * order for the UFS host driver to send the SSU command for power management. + + * We also require the scsi_device instance for "RPMB" (Replay Protected Memory + * Block) LU so user space process can control this LU. User space may also + * want to have access to BOOT LU. + + * This function adds scsi device instances for each of all well known LUs + * (except "REPORT LUNS" LU). + * + * Returns zero on success (all required W-LUs are added successfully), + * non-zero error value on failure (if failed to add any of the required W-LU). + */ +static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) +{ + int ret = 0; + struct scsi_device *sdev_rpmb; + struct scsi_device *sdev_boot; + + hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL); + if (IS_ERR(hba->sdev_ufs_device)) { + ret = PTR_ERR(hba->sdev_ufs_device); + hba->sdev_ufs_device = NULL; goto out; + } + scsi_device_put(hba->sdev_ufs_device); - scsi_dma_unmap(cmd); + sdev_boot = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL); + if (IS_ERR(sdev_boot)) { + ret = PTR_ERR(sdev_boot); + goto remove_sdev_ufs_device; + } + scsi_device_put(sdev_boot); - spin_lock_irqsave(host->host_lock, flags); + sdev_rpmb = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL); + if (IS_ERR(sdev_rpmb)) { + ret = PTR_ERR(sdev_rpmb); + goto remove_sdev_boot; + } + scsi_device_put(sdev_rpmb); + goto out; - /* clear the respective UTRLCLR register bit */ - ufshcd_utrl_clear(hba, tag); +remove_sdev_boot: + scsi_remove_device(sdev_boot); +remove_sdev_ufs_device: + scsi_remove_device(hba->sdev_ufs_device); +out: + return ret; +} + +/** + * ufshcd_probe_hba - probe hba to detect device and initialize + * @hba: per-adapter instance + * + * Execute link-startup and verify device initialization + */ +static int ufshcd_probe_hba(struct ufs_hba *hba) +{ + int ret; + + ret = ufshcd_link_startup(hba); + if (ret) + goto out; + + ufshcd_init_pwr_info(hba); + + /* UniPro link is active now */ + ufshcd_set_link_active(hba); + + ret = ufshcd_verify_dev_init(hba); + if (ret) + goto out; + + ret = ufshcd_complete_dev_init(hba); + if (ret) + goto out; + + /* UFS device is also active now */ + ufshcd_set_ufs_dev_active(hba); + ufshcd_force_reset_auto_bkops(hba); + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + hba->wlun_dev_clr_ua = true; + + if (ufshcd_get_max_pwr_mode(hba)) { + dev_err(hba->dev, + "%s: Failed getting max supported power mode\n", + __func__); + } else { + ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info); + if (ret) + dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", + __func__, ret); + } + + /* + * If we are in error handling context or in power management callbacks + * context, no need to scan the host + */ + if (!ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) { + bool flag; + + /* clear any previous UFS device information */ + memset(&hba->dev_info, 0, sizeof(hba->dev_info)); + if (!ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_PWR_ON_WPE, &flag)) + hba->dev_info.f_power_on_wp_en = flag; + + if (!hba->is_init_prefetch) + ufshcd_init_icc_levels(hba); + + /* Add required well known logical units to scsi mid layer */ + if (ufshcd_scsi_add_wlus(hba)) + goto out; + + scsi_scan_host(hba->host); + pm_runtime_put_sync(hba->dev); + } + + if (!hba->is_init_prefetch) + hba->is_init_prefetch = true; + + /* Resume devfreq after UFS device is detected */ + if (ufshcd_is_clkscaling_enabled(hba)) + devfreq_resume_device(hba->devfreq); - __clear_bit(tag, &hba->outstanding_reqs); - hba->lrb[tag].cmd = NULL; - spin_unlock_irqrestore(host->host_lock, flags); out: - return err; + /* + * If we failed to initialize the device or the device is not + * present, turn off the power/clocks etc. + */ + if (ret && !ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) { + pm_runtime_put_sync(hba->dev); + ufshcd_hba_exit(hba); + } + + return ret; +} + +/** + * ufshcd_async_scan - asynchronous execution for probing hba + * @data: data pointer to pass to this function + * @cookie: cookie data + */ +static void ufshcd_async_scan(void *data, async_cookie_t cookie) +{ + struct ufs_hba *hba = (struct ufs_hba *)data; + + ufshcd_probe_hba(hba); } static struct scsi_host_template ufshcd_driver_template = { @@ -1515,69 +4338,994 @@ .proc_name = UFSHCD, .queuecommand = ufshcd_queuecommand, .slave_alloc = ufshcd_slave_alloc, + .slave_configure = ufshcd_slave_configure, .slave_destroy = ufshcd_slave_destroy, + .change_queue_depth = ufshcd_change_queue_depth, .eh_abort_handler = ufshcd_abort, - .eh_device_reset_handler = ufshcd_device_reset, - .eh_host_reset_handler = ufshcd_host_reset, + .eh_device_reset_handler = ufshcd_eh_device_reset_handler, + .eh_host_reset_handler = ufshcd_eh_host_reset_handler, .this_id = -1, .sg_tablesize = SG_ALL, .cmd_per_lun = UFSHCD_CMD_PER_LUN, .can_queue = UFSHCD_CAN_QUEUE, + .max_host_blocked = 1, + .track_queue_depth = 1, }; +static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, + int ua) +{ + int ret; + + if (!vreg) + return 0; + + ret = regulator_set_load(vreg->reg, ua); + if (ret < 0) { + dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", + __func__, vreg->name, ua, ret); + } + + return ret; +} + +static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); +} + +static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); +} + +static int ufshcd_config_vreg(struct device *dev, + struct ufs_vreg *vreg, bool on) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + int min_uV, uA_load; + + BUG_ON(!vreg); + + if (regulator_count_voltages(reg) > 0) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, "%s: %s set voltage failed, err=%d\n", + __func__, name, ret); + goto out; + } + + uA_load = on ? vreg->max_uA : 0; + ret = ufshcd_config_vreg_load(dev, vreg, uA_load); + if (ret) + goto out; + } +out: + return ret; +} + +static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufshcd_config_vreg(dev, vreg, true); + if (!ret) + ret = regulator_enable(vreg->reg); + + if (!ret) + vreg->enabled = true; + else + dev_err(dev, "%s: %s enable failed, err=%d\n", + __func__, vreg->name, ret); +out: + return ret; +} + +static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || !vreg->enabled) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufshcd_config_vreg(dev, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + if (!info) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vcc, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq2, on); + if (ret) + goto out; + +out: + if (ret) { + ufshcd_toggle_vreg(dev, info->vccq2, false); + ufshcd_toggle_vreg(dev, info->vccq, false); + ufshcd_toggle_vreg(dev, info->vcc, false); + } + return ret; +} + +static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on) +{ + struct ufs_vreg_info *info = &hba->vreg_info; + + if (info) + return ufshcd_toggle_vreg(hba->dev, info->vdd_hba, on); + + return 0; +} + +static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg) + goto out; + + vreg->reg = devm_regulator_get(dev, vreg->name); + if (IS_ERR(vreg->reg)) { + ret = PTR_ERR(vreg->reg); + dev_err(dev, "%s: %s get failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +static int ufshcd_init_vreg(struct ufs_hba *hba) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + if (!info) + goto out; + + ret = ufshcd_get_vreg(dev, info->vcc); + if (ret) + goto out; + + ret = ufshcd_get_vreg(dev, info->vccq); + if (ret) + goto out; + + ret = ufshcd_get_vreg(dev, info->vccq2); +out: + return ret; +} + +static int ufshcd_init_hba_vreg(struct ufs_hba *hba) +{ + struct ufs_vreg_info *info = &hba->vreg_info; + + if (info) + return ufshcd_get_vreg(hba->dev, info->vdd_hba); + + return 0; +} + +static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on, + bool skip_ref_clk) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + unsigned long flags; + + if (!head || list_empty(head)) + goto out; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk)) { + if (skip_ref_clk && !strcmp(clki->name, "ref_clk")) + continue; + + if (on && !clki->enabled) { + ret = clk_prepare_enable(clki->clk); + if (ret) { + dev_err(hba->dev, "%s: %s prepare enable failed, %d\n", + __func__, clki->name, ret); + goto out; + } + } else if (!on && clki->enabled) { + clk_disable_unprepare(clki->clk); + } + clki->enabled = on; + dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__, + clki->name, on ? "en" : "dis"); + } + } + + ret = ufshcd_vops_setup_clocks(hba, on); +out: + if (ret) { + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled) + clk_disable_unprepare(clki->clk); + } + } else if (on) { + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.state = CLKS_ON; + spin_unlock_irqrestore(hba->host->host_lock, flags); + } + return ret; +} + +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) +{ + return __ufshcd_setup_clocks(hba, on, false); +} + +static int ufshcd_init_clocks(struct ufs_hba *hba) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct device *dev = hba->dev; + struct list_head *head = &hba->clk_list_head; + + if (!head || list_empty(head)) + goto out; + + list_for_each_entry(clki, head, list) { + if (!clki->name) + continue; + + clki->clk = devm_clk_get(dev, clki->name); + if (IS_ERR(clki->clk)) { + ret = PTR_ERR(clki->clk); + dev_err(dev, "%s: %s clk get failed, %d\n", + __func__, clki->name, ret); + goto out; + } + + if (clki->max_freq) { + ret = clk_set_rate(clki->clk, clki->max_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->max_freq, ret); + goto out; + } + clki->curr_freq = clki->max_freq; + } + dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__, + clki->name, clk_get_rate(clki->clk)); + } +out: + return ret; +} + +static int ufshcd_variant_hba_init(struct ufs_hba *hba) +{ + int err = 0; + + if (!hba->vops) + goto out; + + err = ufshcd_vops_init(hba); + if (err) + goto out; + + err = ufshcd_vops_setup_regulators(hba, true); + if (err) + goto out_exit; + + goto out; + +out_exit: + ufshcd_vops_exit(hba); +out: + if (err) + dev_err(hba->dev, "%s: variant %s init failed err %d\n", + __func__, ufshcd_get_var_name(hba), err); + return err; +} + +static void ufshcd_variant_hba_exit(struct ufs_hba *hba) +{ + if (!hba->vops) + return; + + ufshcd_vops_setup_clocks(hba, false); + + ufshcd_vops_setup_regulators(hba, false); + + ufshcd_vops_exit(hba); +} + +static int ufshcd_hba_init(struct ufs_hba *hba) +{ + int err; + + /* + * Handle host controller power separately from the UFS device power + * rails as it will help controlling the UFS host controller power + * collapse easily which is different than UFS device power collapse. + * Also, enable the host controller power before we go ahead with rest + * of the initialization here. + */ + err = ufshcd_init_hba_vreg(hba); + if (err) + goto out; + + err = ufshcd_setup_hba_vreg(hba, true); + if (err) + goto out; + + err = ufshcd_init_clocks(hba); + if (err) + goto out_disable_hba_vreg; + + err = ufshcd_setup_clocks(hba, true); + if (err) + goto out_disable_hba_vreg; + + err = ufshcd_init_vreg(hba); + if (err) + goto out_disable_clks; + + err = ufshcd_setup_vreg(hba, true); + if (err) + goto out_disable_clks; + + err = ufshcd_variant_hba_init(hba); + if (err) + goto out_disable_vreg; + + hba->is_powered = true; + goto out; + +out_disable_vreg: + ufshcd_setup_vreg(hba, false); +out_disable_clks: + ufshcd_setup_clocks(hba, false); +out_disable_hba_vreg: + ufshcd_setup_hba_vreg(hba, false); +out: + return err; +} + +static void ufshcd_hba_exit(struct ufs_hba *hba) +{ + if (hba->is_powered) { + ufshcd_variant_hba_exit(hba); + ufshcd_setup_vreg(hba, false); + ufshcd_setup_clocks(hba, false); + ufshcd_setup_hba_vreg(hba, false); + hba->is_powered = false; + } +} + +static int +ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp) +{ + unsigned char cmd[6] = {REQUEST_SENSE, + 0, + 0, + 0, + SCSI_SENSE_BUFFERSIZE, + 0}; + char *buffer; + int ret; + + buffer = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto out; + } + + ret = scsi_execute_req_flags(sdp, cmd, DMA_FROM_DEVICE, buffer, + SCSI_SENSE_BUFFERSIZE, NULL, + msecs_to_jiffies(1000), 3, NULL, REQ_PM); + if (ret) + pr_err("%s: failed with err %d\n", __func__, ret); + + kfree(buffer); +out: + return ret; +} + /** - * ufshcd_suspend - suspend power management function + * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device + * power mode * @hba: per adapter instance - * @state: power state + * @pwr_mode: device power mode to set * - * Returns -ENOSYS + * Returns 0 if requested power mode is set successfully + * Returns non-zero if failed to set the requested power mode */ -int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state) +static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, + enum ufs_dev_pwr_mode pwr_mode) +{ + unsigned char cmd[6] = { START_STOP }; + struct scsi_sense_hdr sshdr; + struct scsi_device *sdp; + unsigned long flags; + int ret; + + spin_lock_irqsave(hba->host->host_lock, flags); + sdp = hba->sdev_ufs_device; + if (sdp) { + ret = scsi_device_get(sdp); + if (!ret && !scsi_device_online(sdp)) { + ret = -ENODEV; + scsi_device_put(sdp); + } + } else { + ret = -ENODEV; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (ret) + return ret; + + /* + * If scsi commands fail, the scsi mid-layer schedules scsi error- + * handling, which would wait for host to be resumed. Since we know + * we are functional while we are here, skip host resume in error + * handling context. + */ + hba->host->eh_noresume = 1; + if (hba->wlun_dev_clr_ua) { + ret = ufshcd_send_request_sense(hba, sdp); + if (ret) + goto out; + /* Unit attention condition is cleared now */ + hba->wlun_dev_clr_ua = false; + } + + cmd[4] = pwr_mode << 4; + + /* + * Current function would be generally called from the power management + * callbacks hence set the REQ_PM flag so that it doesn't resume the + * already suspended childs. + */ + ret = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, + START_STOP_TIMEOUT, 0, NULL, REQ_PM); + if (ret) { + sdev_printk(KERN_WARNING, sdp, + "START_STOP failed for power mode: %d, result %x\n", + pwr_mode, ret); + if (driver_byte(ret) & DRIVER_SENSE) + scsi_print_sense_hdr(sdp, NULL, &sshdr); + } + + if (!ret) + hba->curr_dev_pwr_mode = pwr_mode; +out: + scsi_device_put(sdp); + hba->host->eh_noresume = 0; + return ret; +} + +static int ufshcd_link_state_transition(struct ufs_hba *hba, + enum uic_link_state req_link_state, + int check_for_bkops) +{ + int ret = 0; + + if (req_link_state == hba->uic_link_state) + return 0; + + if (req_link_state == UIC_LINK_HIBERN8_STATE) { + ret = ufshcd_uic_hibern8_enter(hba); + if (!ret) + ufshcd_set_link_hibern8(hba); + else + goto out; + } + /* + * If autobkops is enabled, link can't be turned off because + * turning off the link would also turn off the device. + */ + else if ((req_link_state == UIC_LINK_OFF_STATE) && + (!check_for_bkops || (check_for_bkops && + !hba->auto_bkops_enabled))) { + /* + * Change controller state to "reset state" which + * should also put the link in off/reset state + */ + ufshcd_hba_stop(hba); + /* + * TODO: Check if we need any delay to make sure that + * controller is reset + */ + ufshcd_set_link_off(hba); + } + +out: + return ret; +} + +static void ufshcd_vreg_set_lpm(struct ufs_hba *hba) { /* - * TODO: - * 1. Block SCSI requests from SCSI midlayer - * 2. Change the internal driver state to non operational - * 3. Set UTRLRSR and UTMRLRSR bits to zero - * 4. Wait until outstanding commands are completed - * 5. Set HCE to zero to send the UFS host controller to reset state + * If UFS device is either in UFS_Sleep turn off VCC rail to save some + * power. + * + * If UFS device and link is in OFF state, all power supplies (VCC, + * VCCQ, VCCQ2) can be turned off if power on write protect is not + * required. If UFS link is inactive (Hibern8 or OFF state) and device + * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode. + * + * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway + * in low power state which would save some power. */ + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ufshcd_setup_vreg(hba, false); + } else if (!ufshcd_is_ufs_dev_active(hba)) { + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); + if (!ufshcd_is_link_active(hba)) { + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2); + } + } +} + +static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) +{ + int ret = 0; + + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ret = ufshcd_setup_vreg(hba, true); + } else if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true); + if (!ret && !ufshcd_is_link_active(hba)) { + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); + if (ret) + goto vcc_disable; + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); + if (ret) + goto vccq_lpm; + } + } + goto out; + +vccq_lpm: + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); +vcc_disable: + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); +out: + return ret; +} - return -ENOSYS; +static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba)) + ufshcd_setup_hba_vreg(hba, false); +} + +static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba)) + ufshcd_setup_hba_vreg(hba, true); } -EXPORT_SYMBOL_GPL(ufshcd_suspend); /** - * ufshcd_resume - resume power management function + * ufshcd_suspend - helper function for suspend operations * @hba: per adapter instance + * @pm_op: desired low power operation type + * + * This function will try to put the UFS device and link into low power + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" + * (System PM level). * - * Returns -ENOSYS + * If this function is called during shutdown, it will make sure that + * both UFS device and UFS link is powered off. + * + * NOTE: UFS device & link must be active before we enter in this function. + * + * Returns 0 for success and non-zero for failure */ -int ufshcd_resume(struct ufs_hba *hba) +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) { + int ret = 0; + enum ufs_pm_level pm_lvl; + enum ufs_dev_pwr_mode req_dev_pwr_mode; + enum uic_link_state req_link_state; + + hba->pm_op_in_progress = 1; + if (!ufshcd_is_shutdown_pm(pm_op)) { + pm_lvl = ufshcd_is_runtime_pm(pm_op) ? + hba->rpm_lvl : hba->spm_lvl; + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); + } else { + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; + req_link_state = UIC_LINK_OFF_STATE; + } + /* - * TODO: - * 1. Set HCE to 1, to start the UFS host controller - * initialization process - * 2. Set UTRLRSR and UTMRLRSR bits to 1 - * 3. Change the internal driver state to operational - * 4. Unblock SCSI requests from SCSI midlayer + * If we can't transition into any of the low power modes + * just gate the clocks. */ + ufshcd_hold(hba, false); + hba->clk_gating.is_suspended = true; - return -ENOSYS; + if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && + req_link_state == UIC_LINK_ACTIVE_STATE) { + goto disable_clks; + } + + if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && + (req_link_state == hba->uic_link_state)) + goto out; + + /* UFS device & link must be active before we enter in this function */ + if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { + ret = -EINVAL; + goto out; + } + + if (ufshcd_is_runtime_pm(pm_op)) { + if (ufshcd_can_autobkops_during_suspend(hba)) { + /* + * The device is idle with no requests in the queue, + * allow background operations if bkops status shows + * that performance might be impacted. + */ + ret = ufshcd_urgent_bkops(hba); + if (ret) + goto enable_gating; + } else { + /* make sure that auto bkops is disabled */ + ufshcd_disable_auto_bkops(hba); + } + } + + if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) && + ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) || + !ufshcd_is_runtime_pm(pm_op))) { + /* ensure that bkops is disabled */ + ufshcd_disable_auto_bkops(hba); + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); + if (ret) + goto enable_gating; + } + + ret = ufshcd_link_state_transition(hba, req_link_state, 1); + if (ret) + goto set_dev_active; + + ufshcd_vreg_set_lpm(hba); + +disable_clks: + /* + * The clock scaling needs access to controller registers. Hence, Wait + * for pending clock scaling work to be done before clocks are + * turned off. + */ + if (ufshcd_is_clkscaling_enabled(hba)) { + devfreq_suspend_device(hba->devfreq); + hba->clk_scaling.window_start_t = 0; + } + /* + * Call vendor specific suspend callback. As these callbacks may access + * vendor specific host controller register space call them before the + * host clocks are ON. + */ + ret = ufshcd_vops_suspend(hba, pm_op); + if (ret) + goto set_link_active; + + ret = ufshcd_vops_setup_clocks(hba, false); + if (ret) + goto vops_resume; + + if (!ufshcd_is_link_active(hba)) + ufshcd_setup_clocks(hba, false); + else + /* If link is active, device ref_clk can't be switched off */ + __ufshcd_setup_clocks(hba, false, true); + + hba->clk_gating.state = CLKS_OFF; + /* + * Disable the host irq as host controller as there won't be any + * host controller transaction expected till resume. + */ + ufshcd_disable_irq(hba); + /* Put the host controller in low power mode if possible */ + ufshcd_hba_vreg_set_lpm(hba); + goto out; + +vops_resume: + ufshcd_vops_resume(hba, pm_op); +set_link_active: + ufshcd_vreg_set_hpm(hba); + if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba)) + ufshcd_set_link_active(hba); + else if (ufshcd_is_link_off(hba)) + ufshcd_host_reset_and_restore(hba); +set_dev_active: + if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) + ufshcd_disable_auto_bkops(hba); +enable_gating: + hba->clk_gating.is_suspended = false; + ufshcd_release(hba); +out: + hba->pm_op_in_progress = 0; + return ret; } -EXPORT_SYMBOL_GPL(ufshcd_resume); /** - * ufshcd_hba_free - free allocated memory for - * host memory space data structures + * ufshcd_resume - helper function for resume operations * @hba: per adapter instance + * @pm_op: runtime PM or system PM + * + * This function basically brings the UFS device, UniPro link and controller + * to active state. + * + * Returns 0 for success and non-zero for failure */ -static void ufshcd_hba_free(struct ufs_hba *hba) +static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { - iounmap(hba->mmio_base); - ufshcd_free_hba_memory(hba); + int ret; + enum uic_link_state old_link_state; + + hba->pm_op_in_progress = 1; + old_link_state = hba->uic_link_state; + + ufshcd_hba_vreg_set_hpm(hba); + /* Make sure clocks are enabled before accessing controller */ + ret = ufshcd_setup_clocks(hba, true); + if (ret) + goto out; + + /* enable the host irq as host controller would be active soon */ + ret = ufshcd_enable_irq(hba); + if (ret) + goto disable_irq_and_vops_clks; + + ret = ufshcd_vreg_set_hpm(hba); + if (ret) + goto disable_irq_and_vops_clks; + + /* + * Call vendor specific resume callback. As these callbacks may access + * vendor specific host controller register space call them when the + * host clocks are ON. + */ + ret = ufshcd_vops_resume(hba, pm_op); + if (ret) + goto disable_vreg; + + if (ufshcd_is_link_hibern8(hba)) { + ret = ufshcd_uic_hibern8_exit(hba); + if (!ret) + ufshcd_set_link_active(hba); + else + goto vendor_suspend; + } else if (ufshcd_is_link_off(hba)) { + ret = ufshcd_host_reset_and_restore(hba); + /* + * ufshcd_host_reset_and_restore() should have already + * set the link state as active + */ + if (ret || !ufshcd_is_link_active(hba)) + goto vendor_suspend; + } + + if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); + if (ret) + goto set_old_link_state; + } + + /* + * If BKOPs operations are urgently needed at this moment then + * keep auto-bkops enabled or else disable it. + */ + ufshcd_urgent_bkops(hba); + hba->clk_gating.is_suspended = false; + + if (ufshcd_is_clkscaling_enabled(hba)) + devfreq_resume_device(hba->devfreq); + + /* Schedule clock gating in case of no access to UFS device yet */ + ufshcd_release(hba); + goto out; + +set_old_link_state: + ufshcd_link_state_transition(hba, old_link_state, 0); +vendor_suspend: + ufshcd_vops_suspend(hba, pm_op); +disable_vreg: + ufshcd_vreg_set_lpm(hba); +disable_irq_and_vops_clks: + ufshcd_disable_irq(hba); + ufshcd_setup_clocks(hba, false); +out: + hba->pm_op_in_progress = 0; + return ret; +} + +/** + * ufshcd_system_suspend - system suspend routine + * @hba: per adapter instance + * @pm_op: runtime PM or system PM + * + * Check the description of ufshcd_suspend() function for more details. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_system_suspend(struct ufs_hba *hba) +{ + int ret = 0; + + if (!hba || !hba->is_powered) + return 0; + + if (pm_runtime_suspended(hba->dev)) { + if (hba->rpm_lvl == hba->spm_lvl) + /* + * There is possibility that device may still be in + * active state during the runtime suspend. + */ + if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) == + hba->curr_dev_pwr_mode) && !hba->auto_bkops_enabled) + goto out; + + /* + * UFS device and/or UFS link low power states during runtime + * suspend seems to be different than what is expected during + * system suspend. Hence runtime resume the devic & link and + * let the system suspend low power states to take effect. + * TODO: If resume takes longer time, we might have optimize + * it in future by not resuming everything if possible. + */ + ret = ufshcd_runtime_resume(hba); + if (ret) + goto out; + } + + ret = ufshcd_suspend(hba, UFS_SYSTEM_PM); +out: + if (!ret) + hba->is_sys_suspended = true; + return ret; +} +EXPORT_SYMBOL(ufshcd_system_suspend); + +/** + * ufshcd_system_resume - system resume routine + * @hba: per adapter instance + * + * Returns 0 for success and non-zero for failure + */ + +int ufshcd_system_resume(struct ufs_hba *hba) +{ + if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev)) + /* + * Let the runtime resume take care of resuming + * if runtime suspended. + */ + return 0; + + return ufshcd_resume(hba, UFS_SYSTEM_PM); +} +EXPORT_SYMBOL(ufshcd_system_resume); + +/** + * ufshcd_runtime_suspend - runtime suspend routine + * @hba: per adapter instance + * + * Check the description of ufshcd_suspend() function for more details. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_runtime_suspend(struct ufs_hba *hba) +{ + if (!hba || !hba->is_powered) + return 0; + + return ufshcd_suspend(hba, UFS_RUNTIME_PM); +} +EXPORT_SYMBOL(ufshcd_runtime_suspend); + +/** + * ufshcd_runtime_resume - runtime resume routine + * @hba: per adapter instance + * + * This function basically brings the UFS device, UniPro link and controller + * to active state. Following operations are done in this function: + * + * 1. Turn on all the controller related clocks + * 2. Bring the UniPro link out of Hibernate state + * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device + * to active state. + * 4. If auto-bkops is enabled on the device, disable it. + * + * So following would be the possible power state after this function return + * successfully: + * S1: UFS device in Active state with VCC rail ON + * UniPro link in Active state + * All the UFS/UniPro controller clocks are ON + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_runtime_resume(struct ufs_hba *hba) +{ + if (!hba || !hba->is_powered) + return 0; + else + return ufshcd_resume(hba, UFS_RUNTIME_PM); +} +EXPORT_SYMBOL(ufshcd_runtime_resume); + +int ufshcd_runtime_idle(struct ufs_hba *hba) +{ + return 0; +} +EXPORT_SYMBOL(ufshcd_runtime_idle); + +/** + * ufshcd_shutdown - shutdown routine + * @hba: per adapter instance + * + * This function would power off both UFS device and UFS link. + * + * Returns 0 always to allow force shutdown even in case of errors. + */ +int ufshcd_shutdown(struct ufs_hba *hba) +{ + int ret = 0; + + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) + goto out; + + if (pm_runtime_suspended(hba->dev)) { + ret = ufshcd_runtime_resume(hba); + if (ret) + goto out; + } + + ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM); +out: + if (ret) + dev_err(hba->dev, "%s failed, err %d\n", __func__, ret); + /* allow force shutdown even in case of errors */ + return 0; } +EXPORT_SYMBOL(ufshcd_shutdown); /** * ufshcd_remove - de-allocate SCSI host and host memory space @@ -1586,31 +5334,57 @@ */ void ufshcd_remove(struct ufs_hba *hba) { + scsi_remove_host(hba->host); /* disable interrupts */ - ufshcd_int_config(hba, UFSHCD_INT_DISABLE); - + ufshcd_disable_intr(hba, hba->intr_mask); ufshcd_hba_stop(hba); - ufshcd_hba_free(hba); - scsi_remove_host(hba->host); scsi_host_put(hba->host); + + ufshcd_exit_clk_gating(hba); + if (ufshcd_is_clkscaling_enabled(hba)) + devfreq_remove_device(hba->devfreq); + ufshcd_hba_exit(hba); } EXPORT_SYMBOL_GPL(ufshcd_remove); /** - * ufshcd_init - Driver initialization routine + * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA) + * @hba: pointer to Host Bus Adapter (HBA) + */ +void ufshcd_dealloc_host(struct ufs_hba *hba) +{ + scsi_host_put(hba->host); +} +EXPORT_SYMBOL_GPL(ufshcd_dealloc_host); + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @hba: per adapter instance + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct ufs_hba *hba) +{ + if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) { + if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64))) + return 0; + } + return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); +} + +/** + * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) * @dev: pointer to device handle * @hba_handle: driver private handle - * @mmio_base: base register address - * @irq: Interrupt line of device * Returns 0 on success, non-zero value on failure */ -int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle, - void __iomem *mmio_base, unsigned int irq) +int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) { struct Scsi_Host *host; struct ufs_hba *hba; - int err; + int err = 0; if (!dev) { dev_err(dev, @@ -1619,13 +5393,6 @@ goto out_error; } - if (!mmio_base) { - dev_err(dev, - "Invalid memory reference for mmio_base is NULL\n"); - err = -ENODEV; - goto out_error; - } - host = scsi_host_alloc(&ufshcd_driver_template, sizeof(struct ufs_hba)); if (!host) { @@ -1636,15 +5403,166 @@ hba = shost_priv(host); hba->host = host; hba->dev = dev; + *hba_handle = hba; + +out_error: + return err; +} +EXPORT_SYMBOL(ufshcd_alloc_host); + +static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + + if (!head || list_empty(head)) + goto out; + + ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE); + if (ret) + return ret; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk)) { + if (scale_up && clki->max_freq) { + if (clki->curr_freq == clki->max_freq) + continue; + ret = clk_set_rate(clki->clk, clki->max_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->max_freq, ret); + break; + } + clki->curr_freq = clki->max_freq; + + } else if (!scale_up && clki->min_freq) { + if (clki->curr_freq == clki->min_freq) + continue; + ret = clk_set_rate(clki->clk, clki->min_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->min_freq, ret); + break; + } + clki->curr_freq = clki->min_freq; + } + } + dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__, + clki->name, clk_get_rate(clki->clk)); + } + + ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE); + +out: + return ret; +} + +static int ufshcd_devfreq_target(struct device *dev, + unsigned long *freq, u32 flags) +{ + int err = 0; + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!ufshcd_is_clkscaling_enabled(hba)) + return -EINVAL; + + if (*freq == UINT_MAX) + err = ufshcd_scale_clks(hba, true); + else if (*freq == 0) + err = ufshcd_scale_clks(hba, false); + + return err; +} + +static int ufshcd_devfreq_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_clk_scaling *scaling = &hba->clk_scaling; + unsigned long flags; + + if (!ufshcd_is_clkscaling_enabled(hba)) + return -EINVAL; + + memset(stat, 0, sizeof(*stat)); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (!scaling->window_start_t) + goto start_window; + + if (scaling->is_busy_started) + scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(), + scaling->busy_start_t)); + + stat->total_time = jiffies_to_usecs((long)jiffies - + (long)scaling->window_start_t); + stat->busy_time = scaling->tot_busy_t; +start_window: + scaling->window_start_t = jiffies; + scaling->tot_busy_t = 0; + + if (hba->outstanding_reqs) { + scaling->busy_start_t = ktime_get(); + scaling->is_busy_started = true; + } else { + scaling->busy_start_t = ktime_set(0, 0); + scaling->is_busy_started = false; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + return 0; +} + +static struct devfreq_dev_profile ufs_devfreq_profile = { + .polling_ms = 100, + .target = ufshcd_devfreq_target, + .get_dev_status = ufshcd_devfreq_get_dev_status, +}; + +/** + * ufshcd_init - Driver initialization routine + * @hba: per-adapter instance + * @mmio_base: base register address + * @irq: Interrupt line of device + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) +{ + int err; + struct Scsi_Host *host = hba->host; + struct device *dev = hba->dev; + + if (!mmio_base) { + dev_err(hba->dev, + "Invalid memory reference for mmio_base is NULL\n"); + err = -ENODEV; + goto out_error; + } + hba->mmio_base = mmio_base; hba->irq = irq; + err = ufshcd_hba_init(hba); + if (err) + goto out_error; + /* Read capabilities registers */ ufshcd_hba_capabilities(hba); /* Get UFS version supported by the controller */ hba->ufs_version = ufshcd_get_ufs_version(hba); + /* Get Interrupt bit mask per version */ + hba->intr_mask = ufshcd_get_intr_mask(hba); + + err = ufshcd_set_dma_mask(hba); + if (err) { + dev_err(hba->dev, "set dma mask failed\n"); + goto out_disable; + } + /* Allocate memory for host memory space */ err = ufshcd_memory_alloc(hba); if (err) { @@ -1658,56 +5576,87 @@ host->can_queue = hba->nutrs; host->cmd_per_lun = hba->nutrs; host->max_id = UFSHCD_MAX_ID; - host->max_lun = UFSHCD_MAX_LUNS; + host->max_lun = UFS_MAX_LUNS; host->max_channel = UFSHCD_MAX_CHANNEL; host->unique_id = host->host_no; host->max_cmd_len = MAX_CDB_SIZE; + hba->max_pwr_info.is_valid = false; + /* Initailize wait queue for task management */ - init_waitqueue_head(&hba->ufshcd_tm_wait_queue); + init_waitqueue_head(&hba->tm_wq); + init_waitqueue_head(&hba->tm_tag_wq); /* Initialize work queues */ - INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler); - INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler); + INIT_WORK(&hba->eh_work, ufshcd_err_handler); + INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); + + /* Initialize UIC command mutex */ + mutex_init(&hba->uic_cmd_mutex); + + /* Initialize mutex for device management commands */ + mutex_init(&hba->dev_cmd.lock); + /* Initialize device management tag acquire wait queue */ + init_waitqueue_head(&hba->dev_cmd.tag_wq); + + ufshcd_init_clk_gating(hba); /* IRQ registration */ - err = request_irq(irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); if (err) { dev_err(hba->dev, "request irq failed\n"); - goto out_lrb_free; - } - - /* Enable SCSI tag mapping */ - err = scsi_init_shared_tag_map(host, host->can_queue); - if (err) { - dev_err(hba->dev, "init shared queue failed\n"); - goto out_free_irq; + goto exit_gating; + } else { + hba->is_irq_enabled = true; } err = scsi_add_host(host, hba->dev); if (err) { dev_err(hba->dev, "scsi_add_host failed\n"); - goto out_free_irq; + goto exit_gating; } - /* Initialization routine */ - err = ufshcd_initialize_hba(hba); + /* Host controller enable */ + err = ufshcd_hba_enable(hba); if (err) { - dev_err(hba->dev, "Initialization failed\n"); + dev_err(hba->dev, "Host controller enable failed\n"); goto out_remove_scsi_host; } - *hba_handle = hba; + + if (ufshcd_is_clkscaling_enabled(hba)) { + hba->devfreq = devfreq_add_device(dev, &ufs_devfreq_profile, + "simple_ondemand", NULL); + if (IS_ERR(hba->devfreq)) { + dev_err(hba->dev, "Unable to register with devfreq %ld\n", + PTR_ERR(hba->devfreq)); + goto out_remove_scsi_host; + } + /* Suspend devfreq until the UFS device is detected */ + devfreq_suspend_device(hba->devfreq); + hba->clk_scaling.window_start_t = 0; + } + + /* Hold auto suspend until async scan completes */ + pm_runtime_get_sync(dev); + + /* + * The device-initialize-sequence hasn't been invoked yet. + * Set the device to power-off state + */ + ufshcd_set_ufs_dev_poweroff(hba); + + async_schedule(ufshcd_async_scan, hba); return 0; out_remove_scsi_host: scsi_remove_host(hba->host); -out_free_irq: - free_irq(irq, hba); -out_lrb_free: - ufshcd_free_hba_memory(hba); +exit_gating: + ufshcd_exit_clk_gating(hba); out_disable: + hba->is_irq_enabled = false; scsi_host_put(host); + ufshcd_hba_exit(hba); out_error: return err; }